Automation & Controls Engineer (Starship Launch Hardware) SpaceXAutomation & Controls Engineer (Starship Launch Hardware)Cape Canaveral, FLProficiency or direct hands-on experience in one or more of the following: electronics test rack design and build, data acquisition setup and field measurements, build of electronics systems or test systems for local assembly or industrial applications. SpaceX's Starship spacecraft and Super Heavy rocket (collectively referred to as Starship) represent a fully reusable transportation system designed to carry both crew and cargo to Earth orbit, the Moon, Mars and beyond.
Sr. Launch Reliability Engineer (Launch Pads & Recovery) Space Exploration TechnologiesSr. Launch Reliability Engineer (Launch Pads & Recovery)Cape Canaveral, FLParticipate in preliminary design review (PDR)/critical design review (CDR) and work with design reliability to ensure design for quality (DFQ), design for manufacturability (DFM), risk quantification/mitigation, and that appropriate test validation methods and inspection techniques, including nondestructive evaluation methods have been considered. Knowledge of quality tools such as Lean principles, Six Sigma, root cause analysis and corrective action, advanced product quality planning (APQP), metrology, process failure mode and effects analysis (PFMEA), control plans, and various problem solving approaches.
NewLaunch Reliability Engineer (Launch Pads & Recovery) Space Exploration TechnologiesLaunch Reliability Engineer (Launch Pads & Recovery)Cape Canaveral, FLParticipate in preliminary design review (PDR)/critical design review (CDR) and work with design reliability to ensure design for quality (DFQ), design for manufacturability (DFM), risk quantification/mitigation, and that appropriate test validation methods and inspection techniques, including nondestructive evaluation methods have been considered. Knowledge of quality tools such as Lean principles, Six Sigma, root cause analysis and corrective action, advanced product quality planning (APQP), metrology, process failure mode and effects analysis (PFMEA), control plans, and various problem solving approaches.
Mechanical/Fluids Engineer M2X Energy IncMechanical/Fluids EngineerRockledge, FLThe ideal candidate would be a self-starter with the ability to quickly solve problems by leveraging their broad knowledge base and experienced critical thinking. Today, M2X Energy is rethinking how fuels and chemicals are made to minimize wasteful gas flaring and venting and reduce the associated environmental and social consequences..
Senior Systems Engineer CACI International Inc.Senior Systems EngineerMelbourne, FL$78,000–$163,800 / yearPay Range: There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications. The Senior System Engineer will support a diverse team of RF systems engineers and mission subject matter experts (SMEs) with backgrounds in electrical, mechanical, RF, hardware, software, firmware, and systems engineering.
Launch Vehicle Data Systems Engineer ManTech International CorpLaunch Vehicle Data Systems EngineerCape Canaveral, FLMANTECH seeks a highly talented Launch Vehicle Data Systems Engineer with skills, background, and experience related to Launch Vehicle (LV) systems, project management, and software productivity tool use, to help the Space Force redefine the future of National Security Space Launch (NSSL). Knowledge/experience with LV systems (liquid propellant rocket engines and systems, ordnance, hydraulics, in-flight avionics, LV ground support equipment, LV structures, composite materials, etc.) with strong preference for individuals with strong avionics hardware design and test experience.
Civil Engineer Salas O'BrienCivil EngineerMerritt Island, FloridaOur specialized experience includes design for data centers, healthcare, science and technology, high-rise buildings, clean energy, education, and other building types as well as structural and building sciences, infrastructure asset management, advanced robotics, and more. Our office (formerly Nelson Engineering, a Salas O’Brien Company) has a significant aerospace heritage working with NASA, US Space Force, and numerous private space companies while providing an ever-expanding mix of engineering services to federal and local government agencies as well as commercial customers in a variety of industries.
Supplier Development Engineer, Supply Chain (Launch Site) SpaceXSupplier Development Engineer, Supply Chain (Launch Site)Cape Canaveral, FLAct as the technical point of contact for assigned parts or systems within flight, non-flight, and launch site and recovery infrastructure, solving emergent challenges at suppliers and mitigating risk to the manifest by addressing high-impact manufacturing and quality challenges. To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Launch Engineer, Dragon SpaceXLaunch Engineer, DragonCape Canaveral, FLTo conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. 1+ years of experience in hardware development, vehicle integration or refurbishment, manufacturing, pressurized systems, structural assembly, test operations, or related operations (internship and project experience accepted).
NewSupplier Development Engineer, Supply Chain (Launch Site) Space Exploration TechnologiesSupplier Development Engineer, Supply Chain (Launch Site)Cape Canaveral, FLRESPONSIBILITIES: Act as the technical point of contact for assigned parts or systems within flight, non-flight, and launch site and recovery infrastructure, solving emergent challenges at suppliers and mitigating risk to the manifest by addressing high-impact manufacturing and quality challenges. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
NewLaunch Engineer, Dragon Space Exploration TechnologiesLaunch Engineer, DragonCape Canaveral, FLITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. 1+ years of experience in hardware development, vehicle integration or refurbishment, manufacturing, pressurized systems, structural assembly, test operations, or related operations (internship and project experience accepted).
Program Quality Engineer CACI International Inc.Program Quality EngineerMelbourne, FL$54,700–$112,000 / yearThe Program Quality Engineer works cross-functionally with Program Management, Engineering, Operations, and Supply Chain to define and execute program quality plans; establish and maintain robust RF product and process controls; lead root cause and corrective action efforts; and drive continuous improvement in quality performance, yield, and customer satisfaction. Pay Range: There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications.
Environmental Health & Safety Engineer (Construction Safety) SpaceXEnvironmental Health & Safety Engineer (Construction Safety)Cape Canaveral, FLOversee and own the day-to-day EHS site management of a fast-paced, high impact construction project including the responsibilities below: Implement, enforce, and audit the site’s construction contractor EHS management program for SpaceX employees involved in or associated with contractor operations, ensuring requirements are understood and followed by contractors and subcontractors performing work for SpaceX. Develop and maintain documented safety observations from regular hazard identification inspections of facilities, machinery, safety equipment, and on-site construction to identify, mitigate hazards, and ensure compliance with all applicable regulations and/or guidelines established by OSHA, NFPA and NIOSH and other applicable regulatory agencies, with particular attention to crane, rigging, heavy equipment, welding, and fabrication activities.
NewEnvironmental Health & Safety Engineer (Construction Safety) Space Exploration TechnologiesEnvironmental Health & Safety Engineer (Construction Safety)Cape Canaveral, FLRESPONSIBILITIES: Oversee and own the day-to-day EHS site management of a fast-paced, high impact construction project including the responsibilities below: Implement, enforce, and audit the site's construction contractor EHS management program for SpaceX employees involved in or associated with contractor operations, ensuring requirements are understood and followed by contractors and subcontractors performing work for SpaceX. Develop and maintain documented safety observations from regular hazard identification inspections of facilities, machinery, safety equipment, and on-site construction to identify, mitigate hazards, and ensure compliance with all applicable regulations and/or guidelines established by OSHA, NFPA and NIOSH and other applicable regulatory agencies, with particular attention to crane, rigging, heavy equipment, welding, and fabrication activities.
Photo And Video Engineer III Aetos SystemsPhoto And Video Engineer IIIMerritt Island, FLAs a Photo and Video Engineer III at Aetos Systems, you will be responsible for researching, designing, developing, testing, and overseeing the installation of electrical communication systems at Kennedy Space Center and Cape Canaveral Space Force Station, including mission imagery systems (both photo and video imagery). Define configuration of various imagery components including and not limited to: Baseband, Infrared, High Speed Digital and IP camera systems, camera pan/tilt and tracking components, timecode inserters, video encoders and decoders, media converters, video routing systems, imagery recorders and display units.
Civil Engineer Salas O'Brien, Inc.Civil EngineerMerritt Island, FL$125,000–$135,000 / yearPart timeOur specialized experience includes design for data centers, healthcare, science and technology, high-rise buildings, clean energy, education, and other building types as well as structural and building sciences, infrastructure asset management, advanced robotics, and more. Our office (formerly Nelson Engineering, a Salas O’Brien Company) has a significant aerospace heritage working with NASA, US Space Force, and numerous private space companies while providing an ever-expanding mix of engineering services to federal and local government agencies as well as commercial customers in a variety of industries.
Senior Civil Engineer - Land Development RS&HSenior Civil Engineer - Land DevelopmentMerritt Island, FloridaHaving worked on nearly every type of aerospace structure since the 1960s, our professionals are experts in designing both manned and unmanned orbital and suborbital launch facilities, processing buildings, and ground support equipment. Lead a design team in developing comprehensive civil site design plans for Federal Government and Aerospace projects, including roadways, parking areas, utility systems, and other infrastructure elements.
NewIP Tier 3 Network Engineer Adex CorporationIP Tier 3 Network EngineerMelbourne, FLThe Tier 3 network engineer handles the highest level of network escalation tickets and needs to fully understand the network architecture, be calm under pressure, and be very skilled at network troubleshooting. As an IP Network Engineer, candidates will support supervision of network equipment and service order installation and activations.
NewOptical Transport Engineer (IXC) Adex CorporationOptical Transport Engineer (IXC)Melbourne, FLProvision Optical IXC circuits using Cisco Prime Optical (CPO) or Cisco Transport Controller (CTC) and configure ancillary equipment for delivery of sub-rate circuits (e.g., RAD RICi-16/EGATE-100, Cisco ASR1002/1001-X router port configurations including T3/T1 SIP/SPA, DNX-11/88 port configurations, etc.). Work directly with IXC Deployment Team, IXC Engineering, Telco circuit and network design engineers, and Telco Carrier Provisioning/Circuit designs with team personnel to accurately document circuit designs on Optical networks.
Principal Systems Engineer (Ground Station Architect) CesiumAstroPrincipal Systems Engineer (Ground Station Architect)Melbourne, FLPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. This role is responsible for defining, integrating, and maintaining current and future architectures across satellite platforms, communications payloads, ground stations, and supporting software systems.