Controls Integration Engineer, One MHS | Systems Integration and Flow Amazon.com IncControls Integration Engineer, One MHS | Systems Integration and FlowCincinnati, OHThis role is hands-on and execution-focused, working alongside senior engineers to bring up Industrial PCs (IPCs), PLCs, industrial networks, and field devices during installation and commissioning phases. The Controls Integration Engineer supports the on-site deployment, integration, and commissioning of automated material handling equipment such as sorters, conveyor systems, and automated work cells.
Field Service Controls Engineer Strategic HR ClientField Service Controls EngineerCincinnati, OhioThe work will be repetitive by design and will involve following test procedures, troubleshooting issues, documenting results, and helping ensure equipment is ready before shipment. This is an onsite, hands-on role focused on testing, validating, troubleshooting, and supporting automated manufacturing equipment.
Controls Engineer Actalent IncControls EngineerCincinnati, OHRemote$30–$55 / hourThis role participates in all phases of the product development lifecycle, including analysis, design, electrical design, installation support, debugging, and collaboration with other engineering staff involved in electrical hardware engineering. The work environment emphasizes collaboration with multidisciplinary teams, exposure to advanced automation technologies, and opportunities to support complex, large-scale warehouse automation projects in a rapidly growing organization.
Field Service Controls Engineer Strategic HR IncField Service Controls EngineerCincinnati, OHThe work will be repetitive by design and will involve following test procedures, troubleshooting issues, documenting results, and helping ensure equipment is ready before shipment. What We're Looking For: Associate degree, technical certification, or related training in Robotics, Mechatronics, Industrial Automation, Electrical Engineering Technology, or a similar field.
Controls Engineer, Software M/F The HAHN Group GmbHControls Engineer, Software M/FHebron, KYOrganisationPlease select a value Legal structure (22) HAHN Automation Group (12) HAHN Automation Group Engen (3) HAHN Automation Group Kentucky (2) HAHN Automation Group Ohio (2) HAHN Automation Group South Carolina (2) HAHN Automation Group United States (1). Education: College accreditation with emphasis in engineering or equivalent experience, preferably from within a manufacturing firm-bachelor's degree with concentration in Electrical Engineering or Computer Science strongly preferred.
Sr. Controls Engineer: materials handling / electrical engineering / PLC programming (Allen-Bradley); HMI is a + KORE1 TechnologiesSr. Controls Engineer: materials handling / electrical engineering / PLC programming (Allen-Bradley); HMI is a +Cincinnati, OHRemote$50–$57 / hourThis position has comprehensive knowledge of equipment, business, and customer requirements that drive the design of the technical solutions and participates in all phases of the product development lifecycle, including the analysis, design, electrical designs, installation support, electrical installation debugging, and support of other complementary engineering staff associated with the electrical hardware engineering. This role requires hands-on PLC programming expertise for complex material handling systems within distribution center environments, including the ability to design, develop, modify, and troubleshoot PLC programs from scratch throughout the full project lifecycle.
Electrical Engineer III - Parcel NEW TREW SiteElectrical Engineer III - ParcelCincinnati, OhioBachelors of Science Degree from an accredited college or university in Electrical Engineering (BSEE), Electrical Engineering Technology (BSEET), Computer Science (BSCS), Computer Engineering (BSCE), Computer Engineering Technology (BSCET) or equivalent experience . On large projects, you will work within a design team and for smaller projects you will work on your own with supervision from team leaders, project engineers, project managers and your supervisor. .
Controls Engineer Cleaning Technologies GroupControls EngineerCincinnati, OhioJob Title: Controls Engineer Department: Engineering Reports To: Engineering Team Leader Exemption Classification: Salary, Exempt **Position is located onsite in Cincinnati** Position Summary The Controls Engineer is responsible for the design, programming, integration, and support of machine control systems for custom industrial equipment. This role works across engineering, manufacturing, and customer teams to deliver reliable, functional, and supportable automation systems from project kickoff through startup and customer acceptance.
Senior Controls Engineer PREMIER System IntegratorsSenior Controls EngineerCincinnati, OHAs a leader in providing industrial automation and integration services, we offer stimulating, challenging projects across a wide variety of industries including Consumer Packaged Goods, Food and Beverage, Chemical, Automotive, Metals, Pulp & Paper and Power & Utilities. Servo design, development, and troubleshooting experience of advanced motion control systems including multi-axis, coordinated axis applications is a plus (Rockwell Kinetix experience is a plus).
Controls Engineer Cleaning Technologies Group, LLCControls EngineerCincinnati, OHThis role works across engineering, manufacturing, and customer teams to deliver reliable, functional, and supportable automation systems from project kickoff through startup and customer acceptance. Successful Controls Engineers are strong problem-solvers who combine technical capability with ownership and teamwork.
Controls Engineer II, III, or IV Brewer Science, Inc.Controls Engineer II, III, or IVOHLead complex projects developing software or controls systems for new equipment and projects from concept to completion, ensuring alignment with organization goals and objectives. This position is responsible for developing, programming, configuring, installing, inspecting, troubleshooting, and supporting software to maintain automation equipment and lean initiatives.
Controls Engineer I or II Brewer Science, Inc.Controls Engineer I or IIOHSpecify, test, and integrate hardware and software components such as robots, analog devices, motion controllers, sensors, vision systems, lasers, and other control related hardware and new controls systems. This position is responsible for developing, programming, configuring, installing, inspecting, troubleshooting, and supporting software to maintain automation equipment and lean initiatives.
NewIndustrial Controls Reliability Engineer Skillframe AIIndustrial Controls Reliability EngineerMason, OHYou’ll start by clearing a bottleneck on an automated line, dig into PLC logic to isolate a stubborn intermittent fault, collaborate with Manufacturing Engineering to shave seconds off a cycle, and wrap up by updating drawings, backups, and spares so we’re ready for tomorrow’s launch. Support robots (industrial and collaborative), automated assembly, conveyors, torque systems, vision inspection, laser marking, dispensing, battery cyclers, and automated end-of-line test equipment.
Controls Engineer Manager KPI SolutionsControls Engineer ManagerCincinnati, OHRemoteThe Controls Engineer Manager is responsible for end‑to‑end execution of all brownfield projects and small-medium greenfield projects, with accountability for engineering delivery, cost control, schedule adherence, and risk management. Manage day‑to‑day engineering activities across design, implementation, commissioning, and close‑out, ensuring adherence to project schedules, scope, and cost targets.
NewPETO Electrical Engineer GE Aerospace.PETO Electrical EngineerEvendale, OHYou will coordinate directly with the Test Facilities Engineering department to manage engineering requests, design and maintain test infrastructure systems, produce precise technical drawings, and ensure the safety, reliability, and optimization of our advanced testing environments. Technical Leadership (SME): Serve as the definitive technical authority on all electrical equipment, power distribution, and control systems within the test facilities; troubleshoot complex system failures and guide long-term infrastructure upgrades.
Continuous Improvement Manufacturing Engineer I-Iii Hyster-Yale Materials HandlingContinuous Improvement Manufacturing Engineer I-IiiHY US Berea, KYWho we are: Hyster-Yale Materials Handling, Inc., designs, engineers, manufactures, sells and services a comprehensive line of lift trucks, aftermarket parts and technology and energy solutions that are transforming the way the world moves materials from Port to Home. Hyster-Yale Materials Handling, Inc, a world-class manufacturer of industrial lift trucks, has an outstanding opportunity for an exceptional and talented Continuous Improvement Manufacturing Engineer I-III based at our Berea, KY manufacturing facility.
Senior Manufacturing Engineer Meridian Bioscience, Inc.Senior Manufacturing EngineerCincinnati, OhioAbout Meridian: Meridian Bioscience is a fully integrated life science company that develops, manufactures, markets and distributes a broad range of innovative diagnostic products. Lead cross-functional teams to ensure production equipment maintains design requirements and meets operational goals and user needs.
Controls Engineer - Material Handling E Tech GroupControls Engineer - Material HandlingWest Chester, OHWe'reone of the largest engineering and system integration firms in the United States providing value for our clientsthrough IT automation and control solutions for more than 30 years to the Life Sciences, Mission Critical, Metals& Mining, Warehousing & Distribution, and CPG/Food & Beverage industries. To be successful, you must be an effective collaborator with customers and other associates to deliver the best solution and be willing and able to take direction from project management leaders.
Senior Controls Engineer - Material Handling E Tech GroupSenior Controls Engineer - Material HandlingWest Chester, OHWe'reone of the largest engineering and system integration firms in the United States providing value for our clientsthrough IT automation and control solutions for more than 30 years to the Life Sciences, Mission Critical, Metals& Mining, Warehousing & Distribution, and CPG/Food & Beverage industries. We are seeking a Senior Controls Engineer to be responsible for technical leadership and/or development of solutions in the Material Handling Industry (Parcel, Warehouse Distribution, Manufacturing, AS/RS).
Sr. Controls Engineer QC Industries, LLCSr. Controls EngineerCincinnati, OHThis position has comprehensive knowledge of equipment, business and customer requirements that drive the design of the technical solutions and participates in all phases of product development lifecycle, including the analysis, design, electrical designs, installation support, electrical installation debugging and support of other complimentary engineering staff associated with the electrical hardware engineering. For more than 30 years, the company has delivered innovative automation and material handling solutions that help manufacturers, distributors, and fulfillment centers improve throughput, optimize equipment performance, and achieve exceptional operational uptime.