174 Results for

Aviation Jobs in Edmonds, WA

Jobs

Carnation, WA

Work Environment Assignments with squadrons at naval air stations and aboard aircraft carriers worldwide; work in hangars, avionics labs, and outdoors on flight lines in all weather conditions and high noise environments; close teamwork with other aviation ratings and aircrew in a structured maintenance organization; potential temporary duty with detachments and deployments supporting carrier or expeditionary operations. Additional qualifications for this job may include: United States citizenship and eligibility for a security clearance; normal color perception; interest in aviation and working around aircraft; strong aptitude in electronics, computers, and precision technical work; manual dexterity, good memory, and physical fitness sufficient to work safely on flight lines, in hangars, and on shipboard aircraft.

5 days ago

Woodinville, WA

5 days ago

Stanwood, WA

5 days ago

Kirkland, WA

Key Responsibilities Support aircraft launch and recovery operations in operational environments; assist with aircraft handling, movement, spotting, and securing of aircraft and equipment on flight decks and flight lines; operate aviation support equipment and systems used in aircraft operations; perform inspections and operational checks before and after equipment use; conduct preventive and corrective maintenance on assigned aviation support equipment; support safety practices including foreign object damage (FOD) prevention and emergency readiness; assist with emergency response and training drills related to aviation operations; support administrative and maintenance control activities as required. Work Environment Work primarily in shipboard and shore station aviation environments, including flight decks, hangar bays, and flight lines; exposure to jet blast, rotor wash, noise, heat, weather, and moving equipment is routine; operations occur in a wide range of climates at sea and ashore and often follow the tempo of flight operations, including nights, weekends, and deployments.

5 days ago

Larimers Corner, WA

$22–$29 / hour
Full time

Healthcare (Medical, Dental, and Pharmacy coverage supplemented by Wencor Group) * Company Sponsored Basic Life Insurance, AD&D and LTD * Voluntary Coverages (Vision, Critical Illness, Accident, Hospital Indemnity, Supplemental Life Insurance) * Traditional. Ensure work is performed in accordance with the operations policy and procedure, including daily verification that all aircraft related material in area is properly identified, maintained, preserved, and segregated.

30+ days ago

Larimers Corner, WA

$22–$29 / hour
Full time

Ensure work is performed in accordance with the operations policy and procedure, including daily verification that all aircraft related material in area is properly identified, maintained, preserved, and segregated. For over 30 years, airlines and MROs around the world have trusted our team to deliver quality repairs and fast turnaround times.

30+ days ago

Larimers Corner, WA

$80,500–$85,000 / year
Full time

Under the direction of the Senior Direct, Engineering and Engineering Supervisor, create component repair documentation, suitable for FAA and/or airline approval. Create manufacturing data needed to fabricate components, printed circuit boards and other items to support the repair of aircraft components.

30+ days ago

Larimers Corner, WA

$22–$29 / hour
Full time

30+ days ago

Everett, WA

Part time

For over 50 years, with a proven track record of supporting over 6,000 global organizations worldwide, we combine human expertise with AI-driven insights to deliver customized strategies that upskill talent, drive technology adoption, and optimize critical processes. Our Mission is meaningful and powerful: to deliver innovative people performance through off the shelf and custom learning, mission specialists, and technology solutions, building deep partnerships with customers to help them achieve measurable mission and company performance improvements.

27 days ago

SeaTac, WA

$150,000–$195,000 / year
Full time

For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. This includes participating and developing material for proposals and project interviews, determining scope of work, estimating fees, negotiating contracts, budgeting and cost control, scope and schedule control, staff resource management and quality control of all assigned projects.

30+ days ago

Woodinville, WA

Full time

To comply with those regulations, this position may require applicants to be U.S. Persons (i.e., U.S. citizens, U.S. lawful permanent residents, protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required export authorizations from the U.S. Department of State or the U.S. Department of. This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)).

30+ days ago

Everett, WA

Part time

30+ days ago

Renton, WA

Part time

27 days ago

Renton, WA

Part time

30+ days ago

Tukwila, WA

$97,885–$97,885 / year
Full time

Requirements: Bachelor of Science in Aeronautics, Aviation, Aviation Maintenance, or Aviation Engineering, 3 months of experience and 3 months training in Aircraft mechanic and service. Contact: Send resume to: Rainier Flight Service LLC, 300 Airport Way, Suite 201, Renton, WA 98057.

25 days ago

Everett, WA

$23.50–$37 / hour
Full time

Candidates closer to the lower end of the range are typically building their expertise, while those at the higher end bring significant experience and specialized knowledge. At ATS, we reward your contributions with a well-rounded compensation package designed to support you today and help you plan for tomorrow: Base pay range: $23.50 - $37.00 hourly/DOE plus annual bonus eligibility.

30+ days ago

Everett, WA

$23.50–$37 / hour
Full time

Health: To give employees flexibility to select the coverage that best meets their family’s needs, ATS offers a choice of comprehensive medical/pharmacy plans, dental and vision plans, health and dependent care flexible spending accounts, and voluntary benefits including accident and critical illness. Tuition/License Assistance: ATS offers a generous tuition reimbursement program including Aviation Maintenance Technology (AMT) student loan repayment, Airframe/Powerplant (A&P) certification (coursework and/or testing), and business-related degrees.

25 days ago

Everett, WA

Full time

Post receipt in computer system, including scanning, retrieving and filing certification, reports, etc.- Label, tag or otherwise identify parts- Log any discrepancies; document problems, monitor shelf life, MSDS or other special conditions- Verify all items on shipping manifest are accounted for and packages are not damaged before signing for receipts- Create Repair Files in AX, folders, labels, etc.- Other tasks as necessaryInventory Maintenance- Support MRO and OEM production needs by handling floor stock, and scan/order twin-binhardware delivery system- Monitor and respond appropriately to replenishment triggers- Participates in physical inventories / cycle counting of warehouse- Maintains inventory records by adding or deleting supplies as they are issued, moved, shippedor received- Label, cycle count, control for First in First Out (FIFO)- May coordinate disposal of surplus property and manage records retention.- Able to read size 5 font (serial number and batch numbers)- Handling, storing, and shipping materials or supplies; operating material handling equipment; accessing information on a computer; reviewing documents for accuracy and completeness- Able to lift and carry a minimum of 25 lbs.

30+ days ago

Seattle, WA

$23–$25 / hour
Full time

The employee is exposed to wet and/or humid conditions including extreme heat and cold; high, precarious places; outside weather conditions and vibration; chemicals including aviation fuels, oils, and lavatory fluid. While a LST's main job duties are focused upon the technical services provided to the aircraft (fueling, towing, parking, basic cleaning, etc.), exceptional customer service skills are vital for the successful completion of this role.

30+ days ago

Seattle, WA

$23–$25 / hour
Full time

The employee is exposed to wet and/or humid conditions, including extreme heat and cold; high, precarious places; outside weather conditions and vibration; and chemicals, including aviation fuels, oils, and lavatory fluid. The Line Service Technician (LST) is responsible for providing safe, efficient aircraft ground handling services while delivering exceptional customer service to aircraft owners, guests, and flight crews.

30+ days ago

Seattle, WA

$22–$24 / hour
Part time

Working both inside the Charter Terminal and on the Aircraft Parking Ramp, the Ground Handler collaborates closely with the Charter Manager and the broader management and supervisory team to ensure customer needs are met promptly, professionally, and safely. The Ground Handler plays a critical role in delivering an exceptional customer experience by providing safe, efficient, and highquality ground handling and concierge services to customers, passengers, and flight crews.

30+ days ago

Seattle, WA

$21–$23 / hour
Temporary
Contractor
Part time

The Seasonal (Temporary)Line Service Technician (LST) is responsible for providing safe, efficient aircraft ground handling services while delivering exceptional customer service to aircraft owners, guests, and flight crews. The employee is exposed to wet and/or humid conditions, including extreme heat and cold; high, precarious places; outside weather conditions and vibration; and chemicals, including aviation fuels, oils, and lavatory fluid.

30+ days ago

Seattle, WA

$24–$26 / hour
Full time

This role serves as the first point of contact for customers and flight crews, manages service requests, and ensures a positive, seamless experience within the FBO, even in fastpaced or highpressure situations. Maintain strong working relationships with local service providers such as hotels, rental car agencies, and restaurants.

30+ days ago

$32–$40 / hour

p>PREferred SKILLS AND EXPERIENCE:

• Strong interpersonal and verbal communication skills • Aircraft Electronics Technician (AET) or Certified Aircraft Electronics Technician (CAET) certification and/or Airframe & Powerplant (A&P) Certification • Ability to process fleet data and present trends to engineering, production, and supply chain teams to drive cross-disciplinary improvements to product and process • Ability to fabricate and repair cable harnesses including soldering, crimping, and assembling connectors • Strong computer skills, including experience with Microsoft Office (Excel, Word, PowerPoint, Outlook) and ability to navigate and manipulate files • Experience working with oscilloscopes, digital multimeters, power supplies, and soldering equipment • Experience working with multi-disciplinary engineering teams for product support and issue resolution • Experience with networking problems and basic knowledge of Ethernet, Routing, TCP/IP protocols, and VLAN • Experience working in a customer facing role • Experience with Linux, python or other scripting language.

RESPONSIBILITIES:

• Serve as primary SpaceX technical focal point for Starlink Aviation, interfacing with airline/customer operations point-of-contact • Develop and document procedures to train internal on-call operators for customer support, remote troubleshooting, and debugging • Own external-facing certification and airline contractual deliverables in support of troubleshooting and maintenance of Starlink Aviation systems • Coordinate and support Starlink Aviation installations and provisioning to the network • Build, test, and maintain representative ground test setups to reproduce field issues and aid in root-cause issues • Provide hands-on support for site surveys for new product development and hardware investigations in the field • Monitor fleet health and take ownership of the overall performance of the installed fleet, coordinating with software, network, and aircraft technicians to resolve issues that are impacting service level in an expedited manner.

30+ days ago

Seattle, WA

In addition to the summary below, benefit details for non-represented positions can be found** **on the Port of Seattle's website.** **If the position is represented by a union, please refer to the "** **Collective Bargaining Agreement** **" or contact the appropriate Union Representative for specific information related to benefits and eligibility.** + **Healthcare** - Medical, Dental, and Vision Care with options that work for you and your family. IND123 Our vision is to create a Port that mirrors - throughout its breadth of operations and services and within its leadership - the diversity of our communities, instill principles of equity into its culture, and ensures a fair and intentional distribution of opportunities to expand economic develop and quality of life for all in our region.

16 days ago

Everett, Washington

p/>

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

Right to Work (English) .

6 days ago

Tukwila, Washington

The Boeing Company

Boeing is seeking an Aviation Maintenance Technician and Inspector, who holds an active secret or higher security clearance, to perform maintenance, preventative maintenance and alterations on production during and post flight test activities in support of our KC-46 Tanker in Tukwila, WA.

20 days ago

Everett, WA

p>The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

3+ years of experience with aircraft maintenance on powered aircraft with military, airline or certificated repair station background (an A&P certificate and/or completion of A&P training at an accredited institution will count for 2 years of experience) OR with troubleshooting electrical systems or complex mechanical systems (e.g.

5 days ago

$150,000–$205,000 / year

This hunter-focused role requires strong personal drive to engage new and existing airline and business aviation customers, uncover new terrestrial opportunities, build key relationships, maximize internal and external outcomes, and consistently sign high-value deals that deliver immediate impact.

Conduct deep discovery with existing customers to uncover terrestrial use cases across lounges, gates, hangars, maintenance bays, fleet vehicles, and other ground operations, then share feedback with the engineering and product teams to influence features and roadmap.

30+ days ago

$115,000–$150,000 / year

ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Utilize technical expertise and industry knowledge to guide customers in achieving high levels of performance in the operation and maintenance of the Starlink system by monitoring, investigating performance, developing, and implementing corrective actions.

30+ days ago

$30–$38 / hour

p>BASIC QUALIFICATIONS:

• Associates degree in an electronics discipline or 2+ years of direct work experience in electronics • 1+ years of experience performing testing of electronics or electrical hardware • 1+ years of experience working with test fixtures, harnesses and/or electro-mechanical assemblies. You will help solve aviation-specific EMI compatibility issues, running root cause investigations and collaborating with electrical, silicon, software, mechanical, and manufacturing teams to guarantee and improve the EMI performance of the product.

30+ days ago

$130,000–$180,000 / year

li>5 Years of experience in an engineering function (EG: software, network, mechanical, electrical) OR a technical program/product management role focused on bringing programs/products/services to market.

We are rapidly accelerating our transformation of the airline passenger experience and are seeking engineers with a track record of new product launch, service introduction and engineering solutions to complex technical challenges with partners and customers.

30+ days ago

Redmond, WA

$82,000–$100,000 / year

p>ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan.

30+ days ago

$150,000–$205,000 / year

The role requires personal drive to help the commercial aviation industry realize the potential that a fleet of aircraft connected with a 1Gbps+ pipe enables, develop the necessary relationships, maximize internal and external outcomes, and ultimately sign high-value deals that will have an immediate impact.

BASIC QUALIFICATIONS:

Bachelors degree in an engineering or business discipline and 5+ years of professional experience in business development, partnerships, corporate strategy or sales; OR 10+ years of professional experience in business development, partnerships, corporate strategy or sales in lieu of a degree.

30+ days ago

Des Moines, WA

$95,489–$148,037 / year

Applies comprehensive technical knowledge of and experience with runway safety systems, technologies, and operations to support the development, evaluation, and deployment of new systems designed to automatically alert airport personnel driving or working close to taxiways and runways to incidents that could result in the significant potential for a collision or an actual collision. Contacts are internal and external to Safety (AJI) and include Regional Administrators, FAA line of business contacts, and representatives from pilot associations, national labor associations, and the aviation industry; as well as representatives from international, state, and local governments and airport authorities.

16 days ago

$34–$40 / hour

p>ITAR REQUIREMENTS:

To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Demonstrated ability to read, interpret controlled documentation and processes such as: cable harnesses, wiring diagrams, layout drawings, mechanical drawings, GD&T, assembly procedures/work instructions, schematics, engineering drawings, and parts lists.

30+ days ago

$34–$40 / hour

p>ITAR REQUIREMENTS:

To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Demonstrated ability to read, interpret controlled documentation and processes such as: cable harnesses, wiring diagrams, layout drawings, mechanical drawings, GD&T, assembly procedures/work instructions, schematics, engineering drawings, and parts lists.

30+ days ago

$23–$29 / hour

You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan.

COMPENSATION AND BENEFITS:

Pay range: • Starlink Aviation Integration Technician/Level 1: $23.00 - $29.00/hour • Starlink Aviation Integration Technician/Level 2: $28.00 - $34.50/hour • Starlink Aviation Integration Technician/Level 3: $33.00 - $40.00/hour.

30+ days ago

Woodinville, WA

$34–$40 / hour

RESPONSIBILITIES: + Serve as primary SpaceX technical focal point for Starlink Aviation, interfacing with airline/customer operations point-of-contact + Develop and document procedures to train internal on-call operators for customer support, remote troubleshooting, and debugging + Own external-facing certification and airline contractual deliverables in support of troubleshooting and maintenance of Starlink Aviation systems + Coordinate and support Starlink Aviation installations and provisioning to the network + Build, test, and maintain representative ground test setups to reproduce field issues and aid in root-cause issues + Provide hands-on support for site surveys for new product development and hardware investigations in the field + Monitor fleet health and take ownership of the overall performance of the installed fleet, coordinating with software, network, and aircraft technicians to resolve issues that are impacting service level in an expedited manner BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 2+ years of professional work experience in information technology, aviation, aerospace, consumer electronics, or technical support or a Bachelor's degree in a STEM field + 2+ years of experience working with technical documentation, engineering drawings, and schematics PREFERRED SKILLS AND EXPERIENCE: + Strong interpersonal and verbal communication skills + Aircraft Electronics Technician (AET) or Certified Aircraft Electronics Technician (CAET) certification and/or Airframe & Powerplant (A&P) Certification + Ability to process fleet data and present trends to engineering, production, and supply chain teams to drive cross-disciplinary improvements to product and process + Ability to fabricate and repair cable harnesses including soldering, crimping, and assembling connectors + Strong computer skills, including experience with Microsoft Office (Excel, Word, PowerPoint, Outlook) and ability to navigate and manipulate files + Experience working with oscilloscopes, digital multimeters, power supplies, and soldering equipment + Experience working with multi-disciplinary engineering teams for product support and issue resolution + Experience with networking problems and basic knowledge of Ethernet, Routing, TCP/IP protocols, and VLAN + Experience working in a customer facing role + Experience with Linux, python or other scripting language. ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

19 days ago

Ensure work is performed in accordance with the operations policy and procedure, including daily verification that all aircraft-related material in the area is properly identified, maintained, preserved, and segregated.

For over 30 years, airlines and MROs around the world have trusted our team to deliver quality repairs and fast turnaround times.

30+ days ago

Woodinville, WA

$150,000–$205,000 / year

Report directly to the Global Head of Starlink Aviation + Collaborate with cross-functional teams (engineering, regulatory, product, sales operations, and business teams) + Develop and deliver commercial proposals, sales materials, and business terms while staying current on Starlink technology capabilities, regulatory requirements, and internal priorities + Conduct deep discovery with existing customers to uncover terrestrial use cases across lounges, gates, hangars, maintenance bays, fleet vehicles, and other ground operations, then share feedback with the engineering and product teams to influence features and roadmap. RESPONSIBILITIES: + Responsible for all aspects of successfully closing terrestrial enterprise deals with existing airline, commercial aviation, and business aviation customers + Serve as a key player on the global aviation commercial team, driving expansion of Starlink ground services by identifying opportunities, leading pricing and commercial strategy, and owning business discussions and negotiations.

30+ days ago

Snohomish, WA

19 days ago

$90,000–$125,000 / year

strong>RESPONSIBILITIES: Act as the primary point of contact for one or multiple customer segments within the Aviation vertical, owning responsibilities from contract signature onwards including onboarding, various account management tasks, and supporting efforts for long-term retention/growth of the relationship and revenue. The Starlink Enterprise Account Management team serves as the point of contact for Starlinks growing base of enterprise customers from contract signature, through successful activation, ensuring all contract terms are fulfilled.

30+ days ago

Woodinville, WA
$115,000–$150,000 / year
RESPONSIBILITIES: + Be the primary point of contact for assigned customers or verticals, to resolve issues, negotiate requirements, coordinate technical and contractual changes, and maintain positive relationships + As an extreme owner of assigned accounts, identify and successfully communicate readiness levels, requirements, schedules, and risks to realize forecasted revenue on or ahead of schedule + Utilize technical expertise and industry knowledge to guide customers in achieving high levels of performance in the operation and maintenance of the Starlink system by monitoring, investigating performance, developing, and implementing corrective actions + Serve as a customer advocate; maintain a positive attitude in a crisis environment, and must have the ability to work independently with minimal direction + Helps implement airline and aircraft entry into service and growth plans.? ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
30 days ago

WA
$85,000–$100,000 / year
li>Establish and manage inventory level targets, review line of balances, align demand supply signals and allocations, maintain product master data, and develop expertise in SpaceX software, systems, and reporting tools.
ITAR REQUIREMENTS:
To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
30+ days ago

WA
$95,000–$115,000 / year
li>Establish an efficient product lifecycle starting in the supply chain all the way through final integration that balances cost, complexity, and quality; work closely with partner teams to design and realize an efficient in-house production line.
As a Starlink Mechanical Engineer on the Aviation team, you will own flight hardware from cradle to grave and will interact regularly with senior leadership during critical design phases, ushering in the next era of airborne connectivity!
30+ days ago

WA
$95,000–$115,000 / year
p>PREFERRED SKILLS AND EXPERIENCE:
• 2+ years of experience with FAA certification • Experience with DO-160 environmental testing, aircraft ground testing, aircraft flight testing • Previous ownership of an aerospace certification from application to FAA acceptance • Demonstrated ability to produce documentation deliverables on a tight timeline • Extremely strong proficiency with Microsoft Word as a tool to produce and manage large documents • Experience generating schematics, diagrams, and data visualizations that clearly communicate design intent of systems, tests or analysis • Hardware ownership for mechanical or electrical systems through entire lifecycle (design, qualification, manufacturing, and launch) • Understanding of failure modes of complex mechanical and electrical systems • Extremely strong verbal and written communication skills.
RESPONSIBILITIES:
• Produce certification deliverables on a tight timeline that comply with FAA regulations for supplemental type certification applications (project specific certification plans, test plans, analysis & substantiation reports, conformity inspection plans, operational documents, airplane flight manual supplements) • Drive certification process improvements to reduce overhead and improve schedules for future certification applications • Manage multiple concurrent certification efforts and provide regular updates on schedule and deliverables to senior management • Subject matter expert on the FAA certification process with internal partners and devising/improving SpaceX internal tools and processes to enable meeting the requirements • Work with hardware owners to ensure regulatory compliance early in the design cycle.
30+ days ago

WA
$105,000–$122,500 / year
li>1+ years of experience designing and implementing mixed-signal circuit boards from concept through production using processors, operational amplifiers, analog to digital and digital to analog converters, power supply components, Ethernet, I2C, SPI.
1+ years of electronic product experience designing hardware from concept through production; strong emphasis on full life-cycle development of new hardware products and not small incremental updates to legacy hardware.
12 days ago

WA
$110,000–$145,000 / year
p>PREferred SKILLS AND EXPERIENCE:
• 3+ years of technical procurement experience in electronics or mechanical commodities, preferably in the aerospace industry • Experience working with both international and US domestic suppliers • Established relationships and familiarity working with aircraft component vendors • Knowledge of raw material, machining, fabrication, PCBA, harnessing, or electro-mechanical assemblies • Familiarity with AS9100 and FAA requirements • Experience working in a highly regulated environment • Experience in product development (EVT), new product introduction (NPI), and mass production (MP) • Material management and CTB (Clear to Build) proficiency • Proven success working on cross-functional new product introduction projects, completing should cost models, and negotiating • Familiarity with ERP/MRP systems and purchasing/planning functions • Exceptional written, verbal, and presentation communication skills • Ability to identify and resolve technical, operational, and organizational problems with risk-based decision making • Detail-oriented, self-motivated, and able to respond quickly to a fast-moving and ever-changing environment • Ability to conduct all activities with the highest level of integrity.
BASIC QUALIFICATIONS:
• Bachelor's degree and 5+ years of experience working in one or more of the following; or 9+ years of experience working in one or more of the following in lieu of a degree: • Engineering • Purchasing • Contract negotiation • Material or production planning • Operations or supply chain management • Material cost control • Master production scheduling.
30+ days ago

WA
$95,000–$115,000 / year
p>RESPONSIBILITIES:
• Own hardware from conceptual design through production and operation for aircraft installations • Develop design criteria, collaborate on requirements, and drive system-level optimization • Perform analysis on designs including hand calculations, FEA, and CAD in a rapidly changing environment • Rapidly iterate on designs and analysis to inform high level systems trades and steer overall product direction • Lead design reviews and work with FAA designees to certify components and systems • Generate detailed production drawings using GD&T and performing a tolerance stack up analysis • Drive holistic DFM to create elegant designs with a focus on piece part and process count reductions, error proofing at every step of fabrication and integration, and consistent performance and production metrics • Establish an efficient product lifecycle starting in the supply chain all the way through final integration that balances cost, complexity, and quality; work closely with partner teams to design and realize an efficient in-house production line • Perform environmental and performance testing on hardware to validate analysis and demonstrate compliance to design criteria • Own product delivery timeline through conception, design, assembly, and service.
PREferred SKILLS AND EXPERIENCE:
• Master's degree in engineering or a related technical discipline • 3+ years of professional experience in mechanical design and analysis • 2+ years of hands-on project experience with complex mechanical systems, preferably as a team lead • Proficient in 3D CAD (NX preferred) • Solid understanding and application of GD&T • Demonstrated understanding of structural analysis and failure modes of complex mechanical and electromechanical systems • Prior ownership of a complex component or assembly from initial design through high-volume production ramp • Self-motivated with strong organizational, written, and oral communication skills • Knowledge of and experience in selecting materials, manufacturing methods, and surface treatments for mechanical components • Proficiency in one or more programming languages • Experience working with PCB designers and exposure to PCB layout and PCBA mechanical design • Experience with design of experiments, statistical process control, and process qualification • Specific expertise applicable to any of the above sub-teams.
30+ days ago

Resume Resources

Free Resume Templates Free Resume Builder

Get noticed by top employers!

Upload your resume to let employers know you're open to Aviation job opportunities. Plus, receive relevant job recommendations in your inbox.

Create A Free Account

Aviation Jobs in Edmonds, WA

Aviation Electronics, Electrical & Computer Systems Technician U.S. Navy

Aviation Electrician’s Mate U.S. Navy

Aviation Electronics Technician U.S. Navy

Aviation Operations & Support U.S. Navy

Technician I-Oxygen-Soundair Aviation - Snohomish, WA Wencor Group

Technician I-Soundair Aviation - Snohomish, WA Wencor Group

Engineer I- Soundair Aviation - Snohomish, WA Wencor Group

Aviation Technician - Soundair Aviation - Snohomish, WA Wencor Group

Part-Time Trainer/Instructor (Aircraft/Aviation/Aerospace Industry)- Onsite - Ev GP Strategies Government Solutions, Inc.

Aviation Planning Principal Consultant C&S Engineers, Inc

Quality Inspector - Aviation Primus International LLC

Part-Time Aviation Instructor - Onsite - Everett, WA GP Strategies Government Solutions, Inc.

Part-Time Aviation Instructor - Onsite - Renton, WA GP Strategies Government Solutions, Inc.

Part-Time Aviation Instructor - Renton, WA GP Strategies Government Solutions, Inc.

Aircraft Maintenance Technician Rainier Flight Service

Aircraft Mechanic - Flight Controls Aviation Technical Services

Aircraft Mechanic - Sheet Metal/Structures Aviation Technical Services

Shipping/Receiving Clerk I Belcan Corp

3rd Shift Line Service Technician (2200-0600) Modern Aviation, Inc

3rd shift Line Service Technician (2200-0600) (BFI) Modern Aviation, Inc

Ground Handler (Part-Time, Variable) Modern Aviation, Inc

Technician, Line Service (Temporary, Part-Time) Modern Aviation, Inc

Representative, Customer Service (BFI) Modern Aviation, Inc

Aviation Specialist Starlink Aviation Space Exploration Technologies Corp

Aviation Maintenance Facilities Services Assistant Manager Port of Seattle

Aviation Maintenance Inspector - 97110 Boeing

Aviation Maintenance Technician and Inspector Boeing

Aviation Maintenance Technician - 97110 The Boeing Co

Sr. Terrestrial Services Sales Manager Starlink Aviation Space Exploration Technologies Corp

Enterprise Account Manager, Aviation Space Exploration Technologies Corp

EMC/EMI Test Specialist Starlink Aviation Space Exploration Technologies Corp

Sr. Aviation Development Engineer Starlink Space Exploration Technologies Corp

Account Specialist, Starlink Enterprise Account Management Aviation Space Exploration Technologies Corp

Sr. Partnerships Manager Starlink Commercial Aviation Space Exploration Technologies Corp

Aviation Technical Systems Specialist U.S. Department of Transportation

Integration Specialist Starlink Aviation Space Exploration Technologies Corp

Integration Specialist Starlink Aviation - 2nd Shift Space Exploration Technologies Corp

Starlink Aviation Integration Technician Space Exploration Technologies Corp

Starlink Aviation Specialist SpaceX

Technician I-Soundair Aviation HEICO Corp

Sr. Terrestrial Services Sales Manager (Starlink Aviation) SpaceX

Engineer I- Soundair Aviation HEICO Corporation

Starlink Enterprise Account Lead Aviation Space Exploration Technologies Corp

Enterprise Account Manager (Aviation) SpaceX

Supply Chain Planner Starlink Aviation Space Exploration Technologies Corp

Mechanical Engineer, Aviation Integration Starlink Space Exploration Technologies Corp

Aviation Certification Engineer Starlink Space Exploration Technologies Corp

Hardware Development Electrical Engineer Starlink Aviation Space Exploration Technologies Corp

Sourcing Manager Starlink Aviation Space Exploration Technologies Corp

Mechanical Engineer, Aviation Hardware Starlink Space Exploration Technologies Corp

Resume Resources