NewAvionics Technician AAA USAAvionics TechnicianScottsdale, AZEssential Functions: Maintain close working relationship with assigned lead person with regard to schedules, priorities, availability of parts, supplies and tools, and special instructions as required. You will be part of the team to perform assembly, installation, repair or replacement of aircraft electrical/electronic components and systems in the manufacture, maintenance or refurbishing of aircraft and function check of components.
NewAvionics Techician GAL AeroStaffAvionics TechicianPhoenix, AZ$29–$48 / hourWe are currently seeking an experienced Avionics Technician to support the inspection, troubleshooting, repair, testing, modification, and installation of avionics and electrical systems on flight school and general aviation aircraft. To perform the job successfully, an individual should demonstrate the following competencies: Technical Knowledge – Demonstrates a strong understanding of aircraft avionics, electrical systems, wiring practices, testing, troubleshooting, and installation requirements.
NewLead Electrical & RF Engineer Acron AviationLead Electrical & RF EngineerPhoenix, AZThe successful candidate will drive innovation in Size, Weight, Power, and Cost (SWaP-C) optimization, lead RF architecture and performance trade studies, leverage AI-enabled engineering tools to improve productivity and automation, and own the development of product hardware requirements and design documentation throughout the product lifecycle Technical Leadership Lead electrical engineering activities for the development of RF airborne avionics products from concept through certification and production. Position Summary The Lead Electrical & RF Engineer is responsible for the technical leadership, architecture, development, certification support, and lifecycle management of advanced avionics systems spanning both electrical engineering and radio frequency (RF) domains.
NewControl Panel Builder I AeroSpec IncControl Panel Builder IChandler, AZYou will work under the guidance of experienced panel builders, lead technicians, and engineers while developing skills in panel layout, component mounting, point-to-point wiring, schematic reading, basic testing, and UL 508A industrial control panel practices. 0–2 years of experience in control panel wiring, electrical assembly, electronics, automotive wiring, avionics, commercial electrical work, industrial maintenance, or machine building.
NewSr Airframe and Powerplant Mechanic with Inspection Authorization Rio StaffingSr Airframe and Powerplant Mechanic with Inspection AuthorizationChandler, AZ$42–$48 / hourWorkflow & Priority Management: Work independently to manage daily maintenance workflows, prioritize tasks based on flight school schedules, and ensure minimal aircraft downtime. Regulatory & Technical Compliance: Read, interpret, and apply technical data including maintenance manuals, parts catalogs, engineering drawings, Service Bulletins (SBs), and Airworthiness Directives (ADs).
NewProduct Development Quality Engineer (PDQE) Acron AviationProduct Development Quality Engineer (PDQE)Phoenix, AZThe role supports both ACSS and Acron product development programs and serves as a key participant in regulatory compliance, development audits, design assurance activities, certification releases, and customer-facing quality engagements. Job Description About Acron Aviation (Avionics – Surveillance): Acron Aviation designs, engineers, and manufactures certified avionics systems that support safety-critical flight operations across commercial and military aviation.
NewSpecialist, RF Electrical Engineer Acron AviationSpecialist, RF Electrical EngineerPhoenix, AZJob Description About Acron Aviation (Avionics – Surveillance): Acron Aviation designs, engineers, and manufactures certified avionics systems that support safety-critical flight operations across commercial and military aviation. Working understanding and knowledge of S-parameters (matching networks, cascade analysis, …), Gain budget analysis (Gain, NF, Linearity, Noise power, … ), and Filtering (types, bandwidth, implementations, … ).
NewSenior Specialist, RF Electrical Engineer Acron AviationSenior Specialist, RF Electrical EngineerPhoenix, AZJob Description About Acron Aviation (Avionics – Surveillance): Acron Aviation designs, engineers, and manufactures certified avionics systems that support safety-critical flight operations across commercial and military aviation. You will contribute to new product development and support existing products, working with multidisciplinary engineering teams across electrical, mechanical, software, and systems engineering.
NewRoving A&P Mechanic Total Aviation Staffing, LLCRoving A&P MechanicGlendale, AZJob Description Join a leading air ambulance provider as a Roving A&P Mechanic where you'll play a vital role in maintaining our client's fleet of aircraft and ensuring the safety and quality of life-changing missions. Manage aircraft maintenance at field bases, overseeing stock levels and securing necessary spares for repairs.
NewEngineering Technical Writer - Entry Level TIMES MICROWAVE SYSTEMSEngineering Technical Writer - Entry LevelMesa, AZThe Technical Writer supports the Sales, Engineering and Manufacturing Teams in creating, reviewing, releasing and maintaining technical and manufacturing documentation, supporting Oracle maintenance, ensuring configuration control for required processes as well as supporting through documentation various manufacturing processes. Oracle administration, entry and update of item masters, routings, and bills of material applicable for raw materials and production components to ensure timely and accurate MRP support and release of production documentation.
AVIONICS MANAGER Cutter Holding Co.AVIONICS MANAGERPhoenix, AZProvide regular updates to leadership and customers, manage project budgets where applicable, and drive continuous improvement in project processes to enhance efficiency and quality. Plan, coordinate, and manage avionics projects from initiation through completion, including upgrades, modifications, installations, and customer-driven programs.
Lead Avionics Specialist Embraer SALead Avionics SpecialistMesa, AZGeneral Responsibilities: Performs routine or special maintenance inspections to prevent failure of aircraft electrical and avionics systems and components; performs complete operational and functional checks on navigation, communication and flight control systems, including instrumentation and pilot static installations, etc. Determines when a component should be repaired or replaced; decides upon necessary repair scheme and quantity and type of parts needed to accomplish proper repair; secures same from Stores or departmental supplies.
Lead Avionics Specialist Embraer S.A.Lead Avionics SpecialistMesa, AZGeneral Responsibilities: Performs routine or special maintenance inspections to prevent failure of aircraft electrical and avionics systems and components; performs complete operational and functional checks on navigation, communication and flight control systems, including instrumentation and pilot static installations, etc. Determines when a component should be repaired or replaced; decides upon necessary repair scheme and quantity and type of parts needed to accomplish proper repair; secures same from Stores or departmental supplies.
Lead Avionics Specialist EmbraerLead Avionics SpecialistMesa, AZPerforms routine or special maintenance inspections to prevent failure of aircraft electrical and avionics systems and components; performs complete operational and functional checks on navigation, communication and flight control systems, including instrumentation and pilot static installations, etc. Determines when a component should be repaired or replaced; decides upon necessary repair scheme and quantity and type of parts needed to accomplish proper repair; secures same from Stores or departmental supplies.
Avionics Installation Technician 2 Garmin International, Inc.Avionics Installation Technician 2Mesa, ArizonaFull timestanding and sitting for extended periods of time; kneeling, stooping, crouching, and crawling; climbing and utilizing ladders to connect cables and walking long distances throughout the facility; repetitive motion; tolerates products, materials and fumes associated with aircraft maintenance; tolerates working in confined spaces and heights above four feet. Must possess a minimum of 5 years general aviation, maintenance or avionics experience and/or equivalent combination of education, military aviation experience and/or aviation related experience.
Avionics Aviation Maintenance Technician 145 Air MethodsAvionics Aviation Maintenance Technician 145Mesa, ArizonaFull timeHowever, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. • Performs inspections and repairs of aircraft and components in accordance with maintenance procedures, airworthiness directives, service bulletins, service letters, and applicable Federal Aviation Regulations.
Avionics Specialist The Structures Company, LLCAvionics SpecialistMesa, AZ$32As trusted partners to leading aerospace and defense OEMs and Tier 1 suppliers, we connect professionals with career opportunities to grow and excel in aviation, aerospace, and defense. The Structures Company is a premier national aerospace and defense staffing agency specializing in contract, contract-to-hire, and direct hire placements.
Avionics Installation Technician 2 Garmin LtdAvionics Installation Technician 2Mesa, AZEssential Functions Develop documentation, testing and training plans for new avionics systems to meet internal/external needs Modify aircraft to accommodate panel and remote mounted avionics equipment with demonstrated wiring, termination techniques and harness skills Prepare new aircraft wiring harnesses in accordance with Engineering drawings and installation documents Troubleshoot existing avionics installation interconnects with an advanced understanding of repair station practices Ability to apply solutions and support advanced installations Use ramp test equipment to verify proper function of installed avionics Partner with Engineering in development and verification of new installation documentation Complete Repair Station and aircraft paperwork (logbook entries, FAA 337, W&B, etc.) Compliance with DOT (Department of Transportation) requirements Mentor lower-level technicians and apprentices Assist in maintenance and aircraft movement in the hangar Basic Qualifications High School Diploma or GED Must possess a minimum of 5 years general aviation, maintenance or avionics experience and/or equivalent combination of education, military aviation experience and/or aviation related experience Must possess experience substantially similar to the essential functions of this job description with installing avionics systems in piston, turbine and turbojet aircraft Must possess demonstrated ability to read/interpret aircraft wiring diagrams and installations manuals with the ability to determine basic system integration and configuration Demonstrated ability of aircraft wiring harness termination techniques, wire harness fabrication and harness installation techniques in general aviation aircraft Demonstrated ability in the operational testing and modification of aircraft pitot-static systems, including aircraft transponder testing and RVSM requirements Knowledge of FAA Regulations relating to avionics installations, testing requirements and how to apply those to assigned tasks Must possess the ability to routinely bend, twist, and lift up to 50 lbs. In this role, you will be responsible for installing, troubleshooting and testing certified and experimental avionics systems in FAR (Federal Aviation Regulations) part 23, 25, 27 and 29 aircraft.
Avionics Aviation Maintenance Technician 145 Air Methods CorpAvionics Aviation Maintenance Technician 145Mesa, AZEssential Functions and Responsibilities include the following: Performs inspections and repairs of aircraft and components in accordance with maintenance procedures, airworthiness directives, service bulletins, service letters, and applicable Federal Aviation Regulations• Upon installation or removal of any component or assembly, the Mechanic shall verify by physical inspection or markings on the part that the part number and serial number match the associated documentation • Ensures all aircraft maintenance documentation is executed in compliance with applicable Federal Aviation Regulations, company policies and procedures, and applicable maintenance manuals to include specific chapters• Actively participates in the continuous improvement phase (level 4) of the company's Safety Management System (SMS) and is familiar with the SMS policies, processes, and procedures• Maintains work area in a clean and professional manner• Other Duties as assigned. Skills• Electrical troubleshooting and refined vibration-balancing• Ability to read and understand various documents such as 337's, Service Bulletins, AD's, etc.• Ability to multi-task in a fast paced, constantly changing environment• Ability to be a team player with a professional attitude• Ability to work a flexible schedule including overtime and 24/7 on-call rotation• Efficient in the use of electronic or paper based manuals and able to navigate through vendor data to find necessary information• Ability to learn and utilize the Company's ERP system (Ramco)• Strong communication skills• Ability to apply creativity and problem solving skills in troubleshooting work.
NewLead Avionics Certification Engineer Acron AviationLead Avionics Certification EngineerPhoenix, ArizonaThis work requires close collaboration across engineering, operations, quality, and customer support teams to ensure safe, reliable, and effective in-service performance Position Summary Acron Aviation is seeking a highly experienced Lead Avionics Certification Engineer to lead certification activities for avionics systems and aircraft modifications across commercial, business aviation, and special mission platforms. Through our Aftermarket organization, we support operators, OEMs, and maintenance providers by delivering technical expertise, product support, reliability improvements, and lifecycle sustainment solutions that maximize system availability and customer value.