Cutter Holding Co.AVIONICS TECHNICIAN - FT Cutter Holding Co.AVIONICS TECHNICIAN - FTAddison, TXAssure that all safety precautions are taken and that available protection devices are properly used at all times when applicable to the tasks performed in order to reduce the risk of possible injury and health problems resulting from performing assigned tasks. Ensure that all repairs are accomplished by approved methods and techniques and in accordance with the specifications set forth by the manufacturer in the service manuals, the Federal Aviation Regulations, service bulletins, and airworthiness directives, and other data approved by the FAA administrator.
Guardian FlightAvionics Technician Depot Guardian FlightAvionics Technician DepotDallas, Texas$65,239–$94,567 / year
Sparta NetworkingAvionics Technician - Dallas, TX Sparta NetworkingAvionics Technician - Dallas, TXDallas, TX$32–$42 / hourSparta Networking is supporting a leading aviation maintenance organization in Dallas, Texas in the hiring of experienced Avionics Technicians to support commercial aircraft operations. This position focuses on troubleshooting, repair, installation, and testing of aircraft electrical and avionics systems within a hangar and line maintenance environment.
PlaneSmart! AviationAvionics Technician PlaneSmart! AviationAvionics TechnicianAddison, TXFull timeCessna Citation: CJ series (CJ1/CJ2/CJ3/CJ4), Citation XLS/XLS+ (560XL), Citation V/Ultra/Encore (560), Citation II/Bravo (550/552). Clear Star Aviation is a fast-moving FAA Part 145 repair station at Addison Airport (KADS).
AAA USAAircraft Avionics Technician AAA USAAircraft Avionics TechnicianGrand Prairie, Texas$35–$38Install electrical harness and sub-assemblies in aircraft by performing, but not limited to, the following activities: basic identification of wire and coax cable, clamping, bundling, mounting, routing, stripping, splicing's, soldering, termination. About AAA USA:AAA USA is an in-situ manufacturing company that offers specialized subcontracting and technical assistance services related to industrialization, production and supplier monitoring processes in the Aerospace and Transportation sector.
The Structures Company, LLCAvionics Electric/Technician II - Weekend Days The Structures Company, LLCAvionics Electric/Technician II - Weekend DaysDallas, TX1. Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. 2. Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
Johnson Service GroupRS Avionics/Elec Tech II - Dallas Johnson Service GroupRS Avionics/Elec Tech II - DallasDallas, TXPreferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. 2. Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
The Structures CompanyAvionics Electric/Technician II - Weekend Days The Structures CompanyAvionics Electric/Technician II - Weekend DaysDallas, TXPreferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. 2. Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
Safran SAElectronics Avionics Technician II Safran SAElectronics Avionics Technician IIGrand Prairie, TXThis role requires strong expertise in using digital measurement tools, oscilloscopes, frequency generators, and circuit analysis to accurately isolate faults and perform repairs on complex electronic systems. The Electronic Avionics Technician is responsible for diagnosing and repairing units down to the Shop Replaceable Unit (SRU) and component levels.
The Structures Company, LLCNewAvionics & Electrical Technician II - Weekend Day Shift The Structures Company, LLCAvionics & Electrical Technician II - Weekend Day ShiftDallas, TXAs trusted partners to leading aerospace and defense OEMs and Tier 1 suppliers, we connect professionals with career opportunities to grow and excel in aviation, aerospace, and defense. Four (4)+ years of experience in an avionics/electrical field OR two (2) years of accredited aviation electronics schooling plus two (2) years of related experience.
Safran SAAvionics Technician Safran SAAvionics Techniciangrand prairie, TXu2022Comply with all safety, health, and environmental regulations, actively supporting Safran HSE policies and remaining vigilant for potential hazards when adopting new skills or equipment. Physical Requirements: Shop floor \u2022 While performing the duties of this Job, the employee is regularly required to sit; use hands to finger, handle, or feel and talk or hear.
The Structures CompanyNewAvionics & Electrical Technician II - Weekend Day Shift The Structures CompanyAvionics & Electrical Technician II - Weekend Day ShiftDallas, TXJob DescriptionJOB TITLE: Avionics & Electrical Technician II – Weekend Day ShiftLOCATION: Dallas, TXPAY RATE: $33.81/hourWe are a national aerospace and defense staffing agency seeking highly qualified candidates for a position with a top-tier client.Job Details:Job Type: Contract (12 months with potential for extension)Indu...
Kay and AssociatesAircraft Mechanic II (Electrical/Avionics) Kay and AssociatesAircraft Mechanic II (Electrical/Avionics)Fort Worth, TXFull timeThis mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as blueprints or manufactures' manuals. Must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.
Yantran LLCAvionics Systems Engineer Yantran LLCAvionics Systems EngineerFort Worth, TXThe Avionics Systems Engineer is responsible for developing requirements and MBSE models to support developing and integrating software components related to the control of air vehicle subsystems for the Avionics IPT on the FLRAA program. Skills You Bring to This Role: Bachelor’s degree in aerospace engineering, Electrical Engineering, Software Engineering, Computer Engineering, or Computer Science is required.
The Structures Company, LLCRS Avionics Installer II - Weekend Days Shift The Structures Company, LLCRS Avionics Installer II - Weekend Days ShiftDallas, TXTwo (2) years of accredited schooling in aviation electronics or two (2) years related work experience required or, an avionics certificate from an accredited school and (1) year of related work experience. Ability to read and interpret basic blueprints and schematic diagrams.
The Structures Company, LLCRS Avionics Installer II - Weekend Days The Structures Company, LLCRS Avionics Installer II - Weekend DaysDallas, TXAs trusted partners to leading aerospace and defense OEMs and Tier 1 suppliers, we connect professionals with career opportunities to grow and excel in aviation, aerospace, and defense. Two (2) years of accredited schooling in aviation electronics OR two (2) years of related work experience OR avionics certification with one (1) year of related experience.
Shiftcode Analytics, IncAvionics Systems Engineer - Aerospace and Defense - Client: Triple Crown No Clearnce Needed Shiftcode Analytics, IncAvionics Systems Engineer - Aerospace and Defense - Client: Triple Crown No Clearnce NeededFort Worth, TXExperience with MBSE tools (eg EA Sparx, IBM Rhapsody, Magic Draw), CM tools (eg SVN, Clearcase, git, Dimensions)Knowledge of RF/ microwave test equipment is required, including network analyzers, spectrum analyzers, and phase noise analyzers. Summary: The Avionics Systems Engineer is responsible for developing requirements and MBSE models to support developing and integrating software components related to the control of air vehicle subsystems for the Avionics IPT on the FLRAA program.
LancesoftRS Avionics Installer II LancesoftRS Avionics Installer IIDallas, TX$25The role involves fabricating and installing wiring harnesses, terminating electrical components, and performing functional tests under minimal supervision while ensuring compliance with FAA regulations, engineering drawings, and customer specifications. The RS Avionics Installer II assists in the installation, modification, removal, and testing of avionics and electrical systems on aircraft.
Keltia Design IncNewAvionics Engineer-July22 Keltia Design IncAvionics Engineer-July22Avionics Engineer, TXResponsible for preparing meeting materials and presenting electrical/avionics status updates, including the status of drawings and substantiation documents, as required to keep all parties informed of progress, gain team consensus and ensure progress is made, overseeing the avionics/electrical package to completion. Must qualify as a US Person which is defined as a US Citizen, a Permanent Resident who does not work for a foreign company/foreign government/foreign governmental agency or organization, or a political asylee in compliance with International Traffic in Arms Regulations.
The Structures CompanyRS Avionics Installer II - Weekend Days Shift The Structures CompanyRS Avionics Installer II - Weekend Days ShiftDallas, TXTwo (2) years of accredited schooling in aviation electronics or two (2) years related work experience required or, an avionics certificate from an accredited school and (1) year of related work experience. Ability to read and interpret basic blueprints and schematic diagrams.
The Structures CompanyRS Avionics Installer II - Weekend Days The Structures CompanyRS Avionics Installer II - Weekend DaysDallas, TXAs trusted partners to leading aerospace and defense OEMs and Tier 1 suppliers, we connect professionals with career opportunities to grow and excel in aviation, aerospace, and defense. Two (2) years of accredited schooling in aviation electronics OR two (2) years of related work experience OR avionics certification with one (1) year of related experience.
Belcan LLCTechnician III Belcan LLCTechnician IIIGrand Prairie, TXThis role requires strong expertise in using digital measurement tools, oscilloscopes, frequency generators, and circuit analysis to accurately isolate faults and perform repairs on complex electronic systems. In addition to the above, the Electronic Avionics Technician II is also responsible for the following: • Perform detailed troubleshooting and repair of units down to the SRU level ensuring high-quality maintenance and minimal downtime.
BelcanNewTechnician III BelcanTechnician IIIGrand Prairie, TXThis role requires strong expertise in using digital measurement tools, oscilloscopes, frequency generators, and circuit analysis to accurately isolate faults and perform repairs on complex electronic systems. Electronic Avionics Technician II: In addition to the above, is also responsible for the following * Perform detailed troubleshooting and repair of units down to the SRU level, ensuring high-quality maintenance and minimal downtime.
LanceSoft IncTechnician III LanceSoft IncTechnician IIIGrand Prairie, TX$28–$33 / hourFull timeJob details: Job Title: Electronic Avionics Technician Location: Grand Prairie TX 75052 Duration: 5 months Payrate : 28/hr – 33/hr on w2 (depending on the experience) Work Type: Onsite Description: Job Summary: The Electronic Avionics Technician is responsible for diagnosing and repairing units down to the Shop Replaceable Unit (SRU) and component levels. This role requires strong expertise in using digital measurement tools, oscilloscopes, frequency generators, and circuit analysis to accurately isolate faults and perform repairs on complex electronic systems.
Kalman & Company, Inc.Electronics Technician Kalman & Company, Inc.Electronics TechnicianAddison, TXAssociate’s degree or higher in Electronics Technology, Electrical Engineering Technology, or a related field, OR equivalent military technical training (e.g., MOS/AFSC in electronics, avionics, or communications). The candidate will provide hands-on technical support for airborne sensor and data acquisition systems, including integration, maintenance, calibration, and troubleshooting of electronic instrumentation in a mission-critical operational environment.
Shermco Industries, Inc.SkillBridge - Protection & Controls (P&C) Technician Trainee Shermco Industries, Inc.SkillBridge - Protection & Controls (P&C) Technician TraineeIrving, Texas$45–$50 / hourDuring the SkillBridge program, you’ll gain hands-on experience and exposure to the core responsibilities of a Protection & Controls Technician, includingAssist with the installation, commissioning, testing, and maintenance of protective relay systems, communication equipment, and substation controls. Shermco Industries is seeking transitioning service members to join our SkillBridge Protection & Controls (P&C) Technician program—a hands-on training opportunity designed to bridge military experience into a high-demand civilian career in the electrical power industry.
Safran SATechnician - Test Cell Safran SATechnician - Test CellGrand Prairie, TXReasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions: • Connect oil and fuel lines, instruments, controls, and engine accessories, such as generators, magnetos, and fuel injectors, using hand tools. Safran has a global presence, with 100,000 employees and sales of 27.3 billion euros in 2024, and holds, alone or in partnership, world or regional leadership positions in its core markets.
American AirlinesNewEngineer/Sr Engineer, IT Aviation Cybersecurity (Fort Worth, TX, US) American AirlinesEngineer/Sr Engineer, IT Aviation Cybersecurity (Fort Worth, TX, US)Fort Worth, TXOur 20+ Employee Business Resource Groups are focused on connecting our team members to our customers, suppliers, communities and shareholders, helping team members reach their full potential and creating an inclusive work environment to meet and exceed the needs of our diverse world. Leverages cybersecurity expertise to drive the technical research, planning, and architectural design of systems related to digital aircraft to ensure confidentiality, integrity, and high availability of corporate, vendor, and customer data.
Kay and AssociatesAircraft Mechanic I (Electrician) Kay and AssociatesAircraft Mechanic I (Electrician)Fort Worth, TXFull timeWork involves replacing or repairing worn or damaged components, such as carburetors, alternators, magnetos, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removing engine from aircraft, using hoist or forklift truck, disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective engine parts and reassembles and installs engine in aircraft. Job duties require that this mechanic adjusts, repairs, or replaces electrical wiring system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections, performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes.