Avionics Technician Vista GlobalAvionics TechnicianVan Nuys, California$35–$60 / hourFull timeVista Aircraft Maintenance is the in-house maintenance provider for the Vista Members’ fleet, which comprises an unrivalled fleet of light, super mid-size, long-range and ultra-long-range aircraft. Troubleshoots, repairs, test, removes and replaces avionics and instrument wiring and systems installed in various airframes using hand tools, test equipment and technical documents.
Avionics Technician I - KVNY Clay Lacy AviationAvionics Technician I - KVNYVan Nuys, CAFull timeOur culture is service-driven and collaborative, grounded in excellence, care, accountability, and trust, while supporting our teams in a fast-paced, high-responsibility environment. If you're ready to contribute your skills in a supportive, high-performing environment where every detail matters, you'll find opportunities to grow your career and be part of shaping the future of private aviation.
Senior Avionics Technician Mach IndustriesSenior Avionics TechnicianHuntington Beach, CAConduct board-level Fourier analysis (FFT/spectral analysis) and signal integrity evaluations using advanced test equipment to diagnose complex, intermittent, or elusive faults. Minimum of 5 years of hands-on experience in avionics/electronics troubleshooting and repair with strong emphasis on board-level and component-level diagnostics.
Avionics Technician Mach IndustriesAvionics TechnicianHuntington Beach, CAThis role requires strong electrical workmanship, attention to detail, and comfort working in a fast-paced, documentation-controlled environment. Mach participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. The salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only.
Avionics Technician AstroForgeAvionics TechnicianSeal Beach, CaliforniaITAR Requirements To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by ITAR (22 CFR §120.15), or eligible to obtain the required authorizations from the U.S. Department of State. Your role will require a blend of precision, speed, and problem-solving, as you'll be working on both space and ground systems in a fast-paced environment where accuracy, quality and reliability are paramount.
Avionics Technician I - KVNY Clay Lacy Aviation, Inc.Avionics Technician I - KVNYVan Nuys, CA$36.37–$46 / hourOur culture is service-driven and collaborative, grounded in excellence, care, accountability, and trust, while supporting our teams in a fast-paced, high-responsibility environment. If you're ready to contribute your skills in a supportive, high-performing environment where every detail matters, you'll find opportunities to grow your career and be part of shaping the future of private aviation.
Flight Test Avionics Technician, Manager Anduril Industries IncFlight Test Avionics Technician, ManagerCosta Mesa, CAThis position will be filled by a highly motivated Flight Test Avionics Technician, Manager with a passion for developmental flight test of new and revolutionary products contributing valued mechanical expertise in all fields of aircraft maintenance. Extensive experience and training in Install, troubleshooting and checkout of flight test instrumentation systems to include but not limited to strain gauges, accelerometers, string pots and all associated wiring.
Avionics PCBA Soldering Technician Vast SpaceAvionics PCBA Soldering TechnicianLong Beach, CA$25–$30 / hourVast is looking for an Avionics PCBA Soldering Technician, reporting to the Senior Manager of Avionics Manufacturing, to support the development of the systems that will be required for the design and build of artificial-gravity human-rated space stations. Experience with soldering PCBAs, including soldering in tight spaces such as 0402 packages and high-density ICs, installing jumpers, and performing dead-bugging.
Avionics/Electrical Technician 4 Gulfstream Aerospace CorporationAvionics/Electrical Technician 4Van Nuys, CA$41.40–$48.30 / hourPosition Purpose: Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the worlds most technologically-advanced business jet aircraft #LI-AU1.
Avionics Technician I,II,III or Senior True Anomaly IncAvionics Technician I,II,III or SeniorLong Beach, CA$32–$45 / hourSystem Integration: Work alongside engineering and quality teams to integrate avionics components and subsystems into spacecraft structures, supporting checkouts, functional tests, and troubleshooting to root cause. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
Van Nuys, CA - Avionics Technician Duncan Aviation IncVan Nuys, CA - Avionics TechnicianVan Nuys, CA$37.80–$42.60 / hourtolerates working in confined spaces and heights above four feet reads small print and identifies colors hears sounds associated with mechanical deficiencies repetitive motion works with moving parts and vibration tolerates products and materials associated with component maintenance tolerates standing walking bending kneeling stooping crouching climbing and sitting. Troubleshoots repairs test removes and replaces avionics and instrument wiring and systems installed in various airframes using hand tools test equipment technical documents and technical reference materials.
Avionics Technician DZYNE TechnologiesAvionics TechnicianIrvine, CA$30–$35 / hourPosition Description: The Avionics Technician in this position will be responsible for the creation, modification, route and install aircraft system wire harnesses, perform aircraft operational / functional testing, troubleshooting, repair of newly installed / modified electrical and avionics systems on manned and unmanned aircraft in accordance with DOD, manufacturer, company, supplier and other directives. Must have the ability to assemble, modify, route and install wire bundles, connectors and other electrical components in confined spaces such as cockpits, avionics and ECS bays.
Avionics Manufacturing Technician, Wire Harnessing Vast SpaceAvionics Manufacturing Technician, Wire HarnessingLong Beach, CA$24–$35 / yearprogrammable power supplies, DMMs, oscilloscopes, etc.) 5+ years of experience using basic mechanical and/or electronics hand tools Preferred Skills & Experience: Possession of an associate degree Previous involvement in a high-speed production environment, handling flight hardware Prior involvement in a high-output environment, involving hands-on experience in constructing cables, electro-mechanical devices, or building prototypes Ability to acclimate to frequently changing assignments and a fast-paced working environment Excellent communication skills, both written and oral, along with effective teamwork abilities Superb focus and attention to detail, with remarkable work efficiency and accuracy Experience with soldering PCBAs, including soldering in tight spaces such as 0402 packages and high-density ICs, installing jumpers, and performing dead-bugging Expertise in manufacturing and repairing intricate testing systems Familiarity with Atlassian tools such as SVN, Confluence, and JIRA Basic comprehension of electronic principles and theory Skills in project management Additional Requirements: Willingness to work evenings and/or weekends to support critical mission milestones Ability to lift up to 25 lbs unassisted Pay Range: Avionics Manufacturing Technician I: $24.00 - $35.00 Avionics Manufacturing Technician II: $28.00 - $40.00 Avionics Manufacturing Technician III: $33.00 - $47.00 Pay Range: California $24-$47 USD COMPENSATION AND BENEFITS Base salary will vary depending on job-related knowledge, education, skills, experience, business needs, and market demand. Vast is developing next-generation space stations to ensure a continuous human presence in space for America and its allies, enabling advanced microgravity research and manufacturing, and unlocking a new space economy for government, corporate, and private customers.
Avionics Battery Technician Impulse Space Propulsion Inc.Avionics Battery TechnicianRedondo Beach, CA$25–$45 / hourThis position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Impulse Space's spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR).
Test Technician (Avionics) Impulse Space Propulsion Inc.Test Technician (Avionics)Redondo Beach, CA$30–$50 / hourTo conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. As a Test Technician, you will perform a wide range of spacecraft component and assembly testing while developing and maintaining state-of-the-art test equipment.
Senior Avionics Manufacturing Engineer Impulse Space Propulsion Inc.Senior Avionics Manufacturing EngineerRedondo Beach, CAProven experience leading cross-functional teams to deliver technically complex projectsHighly proficient in mechanical design using Siemens NXStrong project management skillsPreferred Skills and ExperienceM.S. degree in Aerospace Engineering Mechanical Engineering Electrical Engineering or related field6 years of experience in spacecraft avionics manufacturing. Senior Avionics Manufacturing EngineerDepartment ManufacturingEmployment Type Full TimeLocation Redondo Beach Reporting To Alexander HsingCompensation 135000 - 165000 yearDescriptionAs Senior Avionics Manufacturing Engineer Helios vehicle you will work across disciplines to deliver a suite of avionics for our Helios vehicle.
Lead Build Engineer, Avionics Mach IndustriesLead Build Engineer, AvionicsHuntington Beach, CAYou will own the execution of avionics hardware from initial design release through production deployment, ensuring designs are manufacturable, testable, reliable, and capable of scaling to volume production. Mach Industries is seeking a Lead Build Engineer focused on Avionics to drive the successful development, integration, manufacturing, and scaling of avionics systems across our unmanned platforms.
NewAvionics Mechanical Engineering Intern (Fall 2026) Impulse Space Propulsion Inc.Avionics Mechanical Engineering Intern (Fall 2026)Redondo Beach, CATo conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. You will work closely with electrical, propulsion, GNC, and vehicle structures engineers to execute on architectures and products that maximize overall vehicle performance.
Avionics Mechanical Engineer Impulse Space Propulsion Inc.Avionics Mechanical EngineerRedondo Beach, CA$115,000–$150,000 / yearThis position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Lead and contribute to CoDRs, PDRs, and CDRs, clearly communicating design rationale, tradeoffs, and risks to cross-functional stakeholders.
Principal / Sr Principal Engineer Aeronautical - Hardware Avionics Northrop Grumman CorpPrincipal / Sr Principal Engineer Aeronautical - Hardware AvionicsCA$114,000–$171,000 / yearNorthrop Grumman Aeronautics Systems has an opening for a Principal Engineer Aeronautical - Hardware Avionics (Level 3) or Senior Principal Engineer Aeronautical - Hardware Avionics (Level 4) to join our Air Vehicle Hardware Avionics team of qualified, diverse individuals. Must have a Bachelor's Degree in a STEM (Science, Technology, Engineering, or Math) discipline and 5 years of related professional/military experience; OR a Master's Degree in a STEM discipline and 3 years of related professional/military experience; OR a Ph.
Manufacturing Coordinator, Avionics Second Shift Vast SpaceManufacturing Coordinator, Avionics Second ShiftLong Beach, CA$18–$30 / hourVast is developing next-generation space stations to ensure a continuous human presence in space for America and its allies, enabling advanced microgravity research and manufacturing, and unlocking a new space economy for government, corporate, and private customers. We also take pride in offering exceptional food perks, with snacks, drip coffee & onsite barista, cold drinks, and dinner meals remaining free of charge, and lunch subsidized as part of Vasts ongoing commitment to providing high-quality meals for employees.
Production Manager, Avionics Manufacturing Vast SpaceProduction Manager, Avionics ManufacturingLong Beach, CA$132,000–$188,000 / yearThis role leads frontline supervisors, technicians, and production personnel across multiple work centers and is accountable for meeting daily, weekly, and program-level production objectives while supporting continuous improvement and production scalability. Vast is developing next-generation space stations to ensure a continuous human presence in space for America and its allies, enabling advanced microgravity research and manufacturing, and unlocking a new space economy for government, corporate, and private customers.
Avionics Manufacturing Engineer (PCB and PCBA) Impulse Space Propulsion Inc.Avionics Manufacturing Engineer (PCB and PCBA)Redondo Beach, CA$120,000–$145,000 / yearThis position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. As an Avionics Manufacturing Engineer at Impulse (PCB and PCBA), you will provide deep technical expertise on PCB and PCBA technology for spaceflight.
Avionics Manufacturing Engineer (Batteries) Impulse Space Propulsion Inc.Avionics Manufacturing Engineer (Batteries)Redondo Beach, CA$110,000–$140,000 / yearThis position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident, green card holder, an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Impulse Spaces spacecraft manufacturing business is subject to U.S. export regulations, including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR).
Avionics/Electrical Technician 4 General Dynamics CorpAvionics/Electrical Technician 4Van Nuys, CA$41.40–$48.30 / hourPosition Purpose: Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft.
Avionics Shop Supervisor I | KVNY Clay Lacy Aviation, Inc.Avionics Shop Supervisor I | KVNYVan Nuys, CA$67–$73 / hourThe Avionics Shop Supervisor I is responsible for overseeing the execution of the entire work scope including avionics installations, preventive maintenance, and alterations performed under the authority of the Clay Lacy FAA Certificated Repair Station and as directed by the Avionics Manager or Maintenance Operations Manager. Minimum 8 years of experience, including at least 1 year of continuous Lead Technician experience performing complex avionics installations on business jets, including Gulfstream, Bombardier, and Dassault/Falcon aircraft.
Avionics Electro-Mechanical Technicians - 100+ Openings The Structures CompanyAvionics Electro-Mechanical Technicians - 100+ OpeningsIrvine, CA$42–$45 / hourAs trusted partners to leading aerospace and defense OEMs and Tier 1 suppliers, we connect professionals with career opportunities to grow and excel in aviation, aerospace, and defense. Job Type: Long-term 12+ month contract with strong potential to convert to a full-time, direct position after 6 months for top performers.
Senior Avionics Technician Singularity DefenseSenior Avionics TechnicianGardena, CaliforniaRework, assembly, and repair of fine-pitch surface-mount components, including 0201, QFN, BGA, and micro-BGA packages, using microscopes and specialized rework equipment. To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Sr. Avionics Development Technician Long WallSr. Avionics Development TechnicianEl Segundo, CaliforniaAvionics technicians are responsible for a broad range of responsibilities, including PCB assembly and rework, electro-mechanical assemblies, sensors/transducers, cable and wire harnessing, final integration, operating thermal chambers, functional testing, and performing software-driven tests. Ability to read/interpret and work from controlled technical documentation and processes such as engineering drawings, layout drawings, mechanical drawings, assembly procedures, manufacturing instructions, schematics, and parts lists.
Senior Avionics PCBA Technician Relativity Space IncSenior Avionics PCBA TechnicianLong Beach, CA$34–$46.75 / hourAbout the Team: The Avionics team is responsible for all aspects of the electrical design on the rocket, from electronics, interconnects, associated mechanical design, testing and initial production. Demonstrated expertise in fine-pitch soldering, rework, and repair of complex PCBA assemblies, with a keen understanding of advanced soldering techniques and best practices.
Spacecraft Technician Avionics Satellite Harness Manufacturing Varda Space Industries IncSpacecraft Technician Avionics Satellite Harness ManufacturingEl Segundo, CA$29–$32 / hourThe Spacecraft Technician ( Avionics Satellite Harness Manufacturing ) is responsible for manufacturing, assembling, inspecting, and testing electrical harnesses used on satellite bus, payload, and spacecraft systems. Varda was founded in January 2021 by Will Bruey and Delian Asparouhov with significant backing from world class investors including Khosla Ventures, Lux Capital, Founders Fund, Caffeinated Capital, General Catalyst, and Also Capital.
Avionics Production Supervisor Relativity Space IncAvionics Production SupervisorLong Beach, CA$126,000–$174,000 / yearAbout the Team: The Avionics team is responsible for the full lifecycle of Terran R's nervous system, designing, building, testing, installing, and operating the hardware that connects and controls every major electrical system on the vehicle and ground. Engineers are deeply embedded into other functions within Relativity, working closely with propulsion, GNC, fluids, and stage engineering teams to ensure seamless integration and operation.
Avionics Test Integration Engineer II Relativity Space IncAvionics Test Integration Engineer IILong Beach, CA$126,000–$172,500 / yearAbout the Role: You will own the design, release, integration, and maintenance of Avionics Test Infrastructure which includes ground support harnessing, test racks, and test fixtures supporting vehicle manufacturing and test ground support equipment. About the Team: The Avionics team is responsible for the full lifecycle of Terran R's nervous system, designing, building, testing, installing, and operating the hardware that connects and controls every major electrical system on the vehicle and ground.
NewSenior Avionics Manufacturing Engineer, Electromechanical TryApplyNowSenior Avionics Manufacturing Engineer, ElectromechanicalLong Beach, CA$130,000–$166,000 / yearAbout the RoleDevelop detailed process plans, work instructions, and work orders for the manufacturing of avionics hardware and wire harnessesConduct Manufacturing Readiness Reviews (MRRs) to ensure production readiness and risk mitigation before major buildsCollaborate with design engineers to provide Design for Manufacturability (DFM) feedback and improve product designs for ease of fabrication and assemblySupport build technicians during manufacturing by troubleshooting issues, resolving non-conformances, and implementing corrective actionsWork with supply chain and quality teams to ensure the procurement and inspection of high-quality avionics componentsAnalyze process performance and yield data to drive continuous improvement initiatives. About the TeamThe Avionics team is responsible for the full lifecycle of Terran R's nervous system, designing, building, testing, installing, and operating the hardware that connects and controls every major electrical system on the vehicle and ground.
NewSenior Embedded Firmware Engineer (Avionics / Platform Interface) ProtingentSenior Embedded Firmware Engineer (Avionics / Platform Interface)Pasadena, CACustomize and integrate Jetson Linux platforms, including boot chain configuration, device tree updates, kernel bring-up, and MCU-to-Jetson interfaces. Customize and integrate Jetson Linux platforms, including boot chain, device tree, kernel bring-up, and MCU to Jetson interfaces.
Avionics Engineer JetZeroAvionics EngineerLong Beach, CaliforniaAs an Avionics Architecture Engineer, you will be responsible for helping create and integrate the full avionics suite for JetZero's aircraft by translating operator and airworthiness requirements, working with the avionics suppliers to implement those requirements, and going through the testing and integration process. This is only going to increase: Air travel is forecasted to double by 2050, while meaningful efficiency gains using current airplanes have hit a wall.
Senior Avionics Specialist Mach IndustriesSenior Avionics SpecialistHuntington Beach, CAConduct board-level Fourier analysis (FFT/spectral analysis) and signal integrity evaluations using advanced test equipment to diagnose complex, intermittent, or elusive faults. Minimum of 5 years of hands-on experience in avionics/electronics troubleshooting and repair with strong emphasis on board-level and component-level diagnostics.
Avionics Specialist Mach IndustriesAvionics SpecialistHuntington Beach, CAConduct board-level Fourier analysis (FFT/spectral analysis) and signal integrity evaluations using advanced test equipment to diagnose complex, intermittent, or elusive faults. Minimum of 2 years of hands-on experience in avionics/electronics troubleshooting and repair with strong emphasis on board-level and component-level diagnostics.
Mechanical Engineer II, Neutron Avionics Rocket Lab CorporationMechanical Engineer II, Neutron AvionicsLong Beach, CA$100,000–$125,000 / yearTo conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope.
Avionics Test Engineer I/II Rocket Lab CorporationAvionics Test Engineer I/IILong Beach, CA$75,000–$107,000 / yearTo conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope.
NewAvionics Hardware Engineer (All Levels) Next MatterAvionics Hardware Engineer (All Levels)Torrance, CAITAR RequirementsTo conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. We design, build, and test next‑generation long‑range strike weapon systems to give the United States and its Allies a decisive advantage and deter future conflicts.
Head of Avionics Starpath RoboticsHead of AvionicsHawthorne, CaliforniaEAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Today, we are building robotic systems that locally produce the essential commodities a lunar civilization will require at extreme scale: water, power, and oxygen.
Spacecraft Integration Specialist (Avionics) Impulse Space Propulsion Inc.Spacecraft Integration Specialist (Avionics)Redondo Beach, CA$110,000–$140,000 / yearthermal vacuum vibration EMIEMC as requiredMaintain compliance with quality safety and configuration management processesMinimum QualificationsHigh School Diploma or equivalent4 years of experience in avionics testing spacecraft testing or related aerospace systemsHands-on experience with spacecraft or high-reliability avionics hardware and associated test systems EGSEStrong understanding of digital and analog electronicsExperience developing and executing test proceduresProficiency using electrical test and measurement equipmentAbility to read and interpret electrical schematics wiring diagrams and interface control documents ICDsStrong troubleshooting and problem-solving skillsAbility to work independently and in a team-based environmentPreferred Skills and ExperienceBachelors degree in Electrical Engineering Aerospace Engineering or a related technical field or equivalent practical experience7 Experience with spacecraft flight hardware and mission-critical systemsFamiliarity with common spacecraft avionics architectures and data buses e.g. ResponsibilitiesDevelop execute and document avionics test procedures for spacecraft and subsystemsPerform functional interface and system-level testing of flight and flight-like hardwareSupport integration of avionics component payloads sensors cables and harnessingOperate and troubleshoot test equipment such as EGSE oscilloscopes logic analyzers DMMs and power suppliesMaintain spacecraft control racks RF control racks and other EGSE required to operate the spacecraftIdentify diagnose and resolve hardware software and system-level anomaliesCollaborate with engineering teams to support test readiness reviews anomaly resolution and configuration controlGenerate test reports discrepancy reports and contribute to qualification and acceptance documentationSupport environmental testing e.g.
Avionics Electrical Engineer (All Levels) Impulse Space Propulsion Inc.Avionics Electrical Engineer (All Levels)Redondo Beach, CA$110,000–$150,000 / yearThis position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Experience doing new development work for any of the following: power converters, load switches, engine controllers, processors, or any other specialized area relevant to spacecraft or rockets.
Avionics Systems Engineer Starship Space Exploration Technologies CorpAvionics Systems Engineer StarshipHawthorne, CA$100,000–$120,000 / yearThis includes development of new capabilities, electrical design of vehicle architecture, repair of electrical components, and troubleshooting of avionics subsystems including power distribution, vehicle network, onboard sensors, actuators, compute, RF, and video. • 1+ years of experience with electrical component design, system level integration of electronic components or system level testing (internship and collegiate extracurricular engineering project experience will be considered).
Mechanical Engineer - Avionics Integration Mach IndustriesMechanical Engineer - Avionics IntegrationHuntington Beach, CAOwn avionics enclosure and electronics packaging design with a strong emphasis on practical EMI/EMC mitigation techniques such as grounding/bonding strategies, shielding effectiveness, cable entry management, conductive gasketing, filtered connectors, and enclosure seam design. Work cross-functionally with electrical, firmware, systems, manufacturing, and test teams to manage packaging constraints, connector interfaces, harness architecture, grounding schemes, and hardware bring-up through flight qualification.
Manager, Avionics Mechanical Engineer Impulse Space Propulsion Inc.Manager, Avionics Mechanical EngineerRedondo Beach, CA$140,000–$190,000 / yearThis position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Work closely with electrical engineering, RF engineering, optics, manufacturing, integration and test, vehicle engineering, GNC, thermal analysts, dynamics analysts, and harness design teams.
Staff Electrical Engineer (Avionics) Impulse Space Propulsion Inc.Staff Electrical Engineer (Avionics)Redondo Beach, CA$150,000–$190,000 / yearThis position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. You will be part of a team of talented electrical engineers who design and test custom circuit boards, working to rapidly develop high reliability electronics.
NewPropulsion Engineer, Avionics Manufacturing Raptor Space Exploration Technologies CorpPropulsion Engineer, Avionics Manufacturing RaptorHawthorne, CA$100,000–$117,500 / yearAs propulsion engineer on the Raptor avionics manufacturing team, you will be working to development, qualification, automation various manufacturing and test processes as well as scale up our in-house production capability across a wide range of avionics hardware including PCBAs, sensors, harnessing, and more. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Principal Manufacturing Engineer Avionics / Electromechanical / Harnessing Varda Space Industries IncPrincipal Manufacturing Engineer Avionics / Electromechanical / HarnessingEl Segundo, CA$181,913–$232,444 / yearAs a Principal Electromechanical Manufacturing Engineer at Varda, you will play a pivotal role in scaling the production of our spacecraft''s electromechanical assemblies - from wire harness fabrication and connector installation to electromechanical actuator integration and cable routing. Varda was founded in January 2021 by Will Bruey and Delian Asparouhov with significant backing from world class investors including Khosla Ventures, Lux Capital, Founders Fund, Caffeinated Capital, General Catalyst, and Also Capital.