Avionics Technician Vista GlobalAvionics TechnicianVan Nuys, California$35–$60 / hourFull timeVista Aircraft Maintenance is the in-house maintenance provider for the Vista Members’ fleet, which comprises an unrivalled fleet of light, super mid-size, long-range and ultra-long-range aircraft. Troubleshoots, repairs, test, removes and replaces avionics and instrument wiring and systems installed in various airframes using hand tools, test equipment and technical documents.
Avionics Technician I - KVNY Clay Lacy AviationAvionics Technician I - KVNYVan Nuys, CAFull timeOur culture is service-driven and collaborative, grounded in excellence, care, accountability, and trust, while supporting our teams in a fast-paced, high-responsibility environment. If you're ready to contribute your skills in a supportive, high-performing environment where every detail matters, you'll find opportunities to grow your career and be part of shaping the future of private aviation.
Sr. Avionics Development Technician Long WallSr. Avionics Development TechnicianEl Segundo, CaliforniaAvionics technicians are responsible for a broad range of responsibilities, including PCB assembly and rework, electro-mechanical assemblies, sensors/transducers, cable and wire harnessing, final integration, operating thermal chambers, functional testing, and performing software-driven tests. Ability to read/interpret and work from controlled technical documentation and processes such as engineering drawings, layout drawings, mechanical drawings, assembly procedures, manufacturing instructions, schematics, and parts lists.
Senior Avionics Technician Mach IndustriesSenior Avionics TechnicianHuntington Beach, CAConduct board-level Fourier analysis (FFT/spectral analysis) and signal integrity evaluations using advanced test equipment to diagnose complex, intermittent, or elusive faults. Minimum of 5 years of hands-on experience in avionics/electronics troubleshooting and repair with strong emphasis on board-level and component-level diagnostics.
Avionics Technician I - KVNY Clay Lacy Aviation, Inc.Avionics Technician I - KVNYVan Nuys, CA$36.37–$46 / hourOur culture is service-driven and collaborative, grounded in excellence, care, accountability, and trust, while supporting our teams in a fast-paced, high-responsibility environment. If you're ready to contribute your skills in a supportive, high-performing environment where every detail matters, you'll find opportunities to grow your career and be part of shaping the future of private aviation.
Avionics Technician Mach IndustriesAvionics TechnicianHuntington Beach, CAThis role requires strong electrical workmanship, attention to detail, and comfort working in a fast-paced, documentation-controlled environment. Mach participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. The salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only.
Flight Test Avionics Technician, Manager Anduril Industries IncFlight Test Avionics Technician, ManagerCosta Mesa, CA$191,000–$253,000 / yearFlight Test Operations Support: Direct and participate in comprehensive flight test operations, including pre-flight checks, ground operations (Launch, Recovery, Ground Engine run-up), in-flight issue resolution support, and post-flight data validation for prototype and experimental aircraft. Cross-Functional Collaboration & Process Improvement: Serve as a primary technical point of contact, coordinating and collaborating effectively with Flight Test Engineers, Design Engineers, Program Managers, customers, and other departments to define requirements, provide updates, and ensure successful project and test outcomes.
Avionics Technician (PCBA) Impulse Space Propulsion Inc.Avionics Technician (PCBA)Redondo Beach, CA$35–$45 / hourThis position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. As a PCBA Technician, you will perform a wide range of spacecraft assembly, rework, and diagnostic tasks to support the development and production of high-reliability avionics and flight hardware.
Avionics Technician AstroForgeAvionics TechnicianSeal Beach, CaliforniaITAR Requirements To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by ITAR (22 CFR §120.15), or eligible to obtain the required authorizations from the U.S. Department of State. Your role will require a blend of precision, speed, and problem-solving, as you'll be working on both space and ground systems in a fast-paced environment where accuracy, quality and reliability are paramount.
Avionics Technician (PCBA) Impulse SpaceAvionics Technician (PCBA)Redondo Beach, CA$35–$45 / hourThis position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. As a PCBA Technician, you will perform a wide range of spacecraft assembly, rework, and diagnostic tasks to support the development and production of high-reliability avionics and flight hardware.
Avionics Electro-Mechanical Technicians - 100+ Openings The Structures Company, LLCAvionics Electro-Mechanical Technicians - 100+ OpeningsIrvine, CA$42As trusted partners to leading aerospace and defense OEMs and Tier 1 suppliers, we connect professionals with career opportunities to grow and excel in aviation, aerospace, and defense. Job Type: Long-term 12+ month contract with strong potential to convert to a full-time, direct position after 6 months for top performers.
Avionics PCBA Soldering Technician Vast SpaceAvionics PCBA Soldering TechnicianLong Beach, CA$25–$30 / hourVast is looking for an Avionics PCBA Soldering Technician, reporting to the Senior Manager of Avionics Manufacturing, to support the development of the systems that will be required for the design and build of artificial-gravity human-rated space stations. Experience with soldering PCBAs, including soldering in tight spaces such as 0402 packages and high-density ICs, installing jumpers, and performing dead-bugging.
Avionics Technician I,II,III or Senior True Anomaly IncAvionics Technician I,II,III or SeniorLong Beach, CA$32–$45 / hourSystem Integration: Work alongside engineering and quality teams to integrate avionics components and subsystems into spacecraft structures, supporting checkouts, functional tests, and troubleshooting to root cause. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
Avionics/Electrical Technician 4 Gulfstream Aerospace CorporationAvionics/Electrical Technician 4Van Nuys, CA$41.40–$48.30 / hourPosition Purpose: Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the worlds most technologically-advanced business jet aircraft #LI-AU1.
Principal / Sr Principal Engineer Aeronautical - Hardware Avionics Northrop Grumman CorpPrincipal / Sr Principal Engineer Aeronautical - Hardware AvionicsCA$114,000–$171,000 / yearNorthrop Grumman Aeronautics Systems has an opening for a Principal Engineer Aeronautical - Hardware Avionics (Level 3) or Senior Principal Engineer Aeronautical - Hardware Avionics (Level 4) to join our Air Vehicle Hardware Avionics team of qualified, diverse individuals. Must have a Bachelor's Degree in a STEM (Science, Technology, Engineering, or Math) discipline and 5 years of related professional/military experience; OR a Master's Degree in a STEM discipline and 3 years of related professional/military experience; OR a Ph.
Avionics/Electrical Technician 4 General Dynamics CorpAvionics/Electrical Technician 4Van Nuys, CA$41.40–$48.30 / hourPosition Purpose: Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft.
Avionics Manufacturing Technician, Wire Harnessing VastAvionics Manufacturing Technician, Wire HarnessingLong Beach, CaliforniaVast is developing next-generation space stations to ensure a continuous human presence in space for America and its allies, enabling advanced microgravity research and manufacturing, and unlocking a new space economy for government, corporate, and private customers. We also take pride in offering exceptional food perks, with snacks, drip coffee & onsite barista, cold drinks, and dinner meals remaining free of charge, and lunch subsidized as part of Vast’s ongoing commitment to providing high-quality meals for employees.
Avionics Manufacturing Technician, Wire Harnessing Vast SpaceAvionics Manufacturing Technician, Wire HarnessingLong Beach, CA$24–$35 / yearprogrammable power supplies, DMMs, oscilloscopes, etc.) 5+ years of experience using basic mechanical and/or electronics hand tools Preferred Skills & Experience: Possession of an associate degree Previous involvement in a high-speed production environment, handling flight hardware Prior involvement in a high-output environment, involving hands-on experience in constructing cables, electro-mechanical devices, or building prototypes Ability to acclimate to frequently changing assignments and a fast-paced working environment Excellent communication skills, both written and oral, along with effective teamwork abilities Superb focus and attention to detail, with remarkable work efficiency and accuracy Experience with soldering PCBAs, including soldering in tight spaces such as 0402 packages and high-density ICs, installing jumpers, and performing dead-bugging Expertise in manufacturing and repairing intricate testing systems Familiarity with Atlassian tools such as SVN, Confluence, and JIRA Basic comprehension of electronic principles and theory Skills in project management Additional Requirements: Willingness to work evenings and/or weekends to support critical mission milestones Ability to lift up to 25 lbs unassisted Pay Range: Avionics Manufacturing Technician I: $24.00 - $35.00 Avionics Manufacturing Technician II: $28.00 - $40.00 Avionics Manufacturing Technician III: $33.00 - $47.00 Pay Range: California $24-$47 USD COMPENSATION AND BENEFITS Base salary will vary depending on job-related knowledge, education, skills, experience, business needs, and market demand. Vast is developing next-generation space stations to ensure a continuous human presence in space for America and its allies, enabling advanced microgravity research and manufacturing, and unlocking a new space economy for government, corporate, and private customers.
Avionics Battery Technician Impulse Space Propulsion Inc.Avionics Battery TechnicianRedondo Beach, CA$25–$45 / hourThis position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Impulse Space's spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR).
Test Technician (Avionics) Impulse Space Propulsion Inc.Test Technician (Avionics)Redondo Beach, CA$30–$50 / hourTo conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. As a Test Technician, you will perform a wide range of spacecraft component and assembly testing while developing and maintaining state-of-the-art test equipment.
Avionics Shop Supervisor I | KVNY Clay Lacy Aviation, Inc.Avionics Shop Supervisor I | KVNYVan Nuys, CA$67–$73 / hourThe Avionics Shop Supervisor I is responsible for overseeing the execution of the entire work scope including avionics installations, preventive maintenance, and alterations performed under the authority of the Clay Lacy FAA Certificated Repair Station and as directed by the Avionics Manager or Maintenance Operations Manager. Minimum 8 years of experience, including at least 1 year of continuous Lead Technician experience performing complex avionics installations on business jets, including Gulfstream, Bombardier, and Dassault/Falcon aircraft.
Avionics Technician DZYNE TechnologiesAvionics TechnicianIrvine, CA$30–$35 / hourPosition Description: The Avionics Technician in this position will be responsible for the creation, modification, route and install aircraft system wire harnesses, perform aircraft operational / functional testing, troubleshooting, repair of newly installed / modified electrical and avionics systems on manned and unmanned aircraft in accordance with DOD, manufacturer, company, supplier and other directives. Must have the ability to assemble, modify, route and install wire bundles, connectors and other electrical components in confined spaces such as cockpits, avionics and ECS bays.
Lead Build Engineer, Avionics Mach IndustriesLead Build Engineer, AvionicsHuntington Beach, CAYou will own the execution of avionics hardware from initial design release through production deployment, ensuring designs are manufacturable, testable, reliable, and capable of scaling to volume production. Mach Industries is seeking a Lead Build Engineer focused on Avionics to drive the successful development, integration, manufacturing, and scaling of avionics systems across our unmanned platforms.
Senior Avionics Manufacturing Engineer Impulse Space Propulsion Inc.Senior Avionics Manufacturing EngineerRedondo Beach, CAProven experience leading cross-functional teams to deliver technically complex projectsHighly proficient in mechanical design using Siemens NXStrong project management skillsPreferred Skills and ExperienceM.S. degree in Aerospace Engineering Mechanical Engineering Electrical Engineering or related field6 years of experience in spacecraft avionics manufacturing. Senior Avionics Manufacturing EngineerDepartment ManufacturingEmployment Type Full TimeLocation Redondo Beach Reporting To Alexander HsingCompensation 135000 - 165000 yearDescriptionAs Senior Avionics Manufacturing Engineer Helios vehicle you will work across disciplines to deliver a suite of avionics for our Helios vehicle.
Avionics Mechanical Engineering Intern (Fall 2026) Impulse Space Propulsion Inc.Avionics Mechanical Engineering Intern (Fall 2026)Redondo Beach, CATo conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. You will work closely with electrical, propulsion, GNC, and vehicle structures engineers to execute on architectures and products that maximize overall vehicle performance.
Avionics Mechanical Engineer Impulse Space Propulsion Inc.Avionics Mechanical EngineerRedondo Beach, CA$115,000–$150,000 / yearThis position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Lead and contribute to CoDRs, PDRs, and CDRs, clearly communicating design rationale, tradeoffs, and risks to cross-functional stakeholders.
Senior Avionics Technician Singularity DefenseSenior Avionics TechnicianGardena, CaliforniaRework, assembly, and repair of fine-pitch surface-mount components, including 0201, QFN, BGA, and micro-BGA packages, using microscopes and specialized rework equipment. To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Test Technician (Avionics) Impulse SpaceTest Technician (Avionics)Redondo Beach, CA$30–$50 / hourTo conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. As a Test Technician , you will perform a wide range of spacecraft component and assembly testing while developing and maintaining state-of-the-art test equipment.
Avionics PCBA Soldering Technician VastAvionics PCBA Soldering TechnicianLong Beach, CaliforniaVast is developing next-generation space stations to ensure a continuous human presence in space for America and its allies, enabling advanced microgravity research and manufacturing, and unlocking a new space economy for government, corporate, and private customers. We also take pride in offering exceptional food perks, with snacks, drip coffee & onsite barista, cold drinks, and dinner meals remaining free of charge, and lunch subsidized as part of Vast’s ongoing commitment to providing high-quality meals for employees.
Senior Avionics PCBA Technician Relativity Space IncSenior Avionics PCBA TechnicianLong Beach, CA$34–$46.75 / hourAbout the Team: The Avionics team is responsible for all aspects of the electrical design on the rocket, from electronics, interconnects, associated mechanical design, testing and initial production. Demonstrated expertise in fine-pitch soldering, rework, and repair of complex PCBA assemblies, with a keen understanding of advanced soldering techniques and best practices.
Manufacturing Coordinator, Avionics (First Shift) VastManufacturing Coordinator, Avionics (First Shift)Long Beach, CaliforniaVast is developing next-generation space stations to ensure a continuous human presence in space for America and its allies, enabling advanced microgravity research and manufacturing, and unlocking a new space economy for government, corporate, and private customers. We also take pride in offering exceptional food perks, with snacks, drip coffee & onsite barista, cold drinks, and dinner meals remaining free of charge, and lunch subsidized as part of Vast’s ongoing commitment to providing high-quality meals for employees.
Production Manager, Avionics Manufacturing VastProduction Manager, Avionics ManufacturingLong Beach, CaliforniaThis role leads frontline supervisors, technicians, and production personnel across multiple work centers and is accountable for meeting daily, weekly, and program-level production objectives while supporting continuous improvement and production scalability. Vast is developing next-generation space stations to ensure a continuous human presence in space for America and its allies, enabling advanced microgravity research and manufacturing, and unlocking a new space economy for government, corporate, and private customers.
Manufacturing Coordinator, Avionics (Second Shift) VastManufacturing Coordinator, Avionics (Second Shift)Long Beach, CaliforniaVast is developing next-generation space stations to ensure a continuous human presence in space for America and its allies, enabling advanced microgravity research and manufacturing, and unlocking a new space economy for government, corporate, and private customers. Vast is looking for a Manufacturing Coordinator, Second Shift , reporting to the Manager, Manufacturing Operations, to support Haven-1 Manufacturing with the Avionics Manufacturing team and the development of the systems that will be required for the design and build of artificial-gravity human-rated space stations.
Supervisor of Avionics Manufacturing, Harnessing VastSupervisor of Avionics Manufacturing, HarnessingLong Beach, CaliforniaVast is developing next-generation space stations to ensure a continuous human presence in space for America and its allies, enabling advanced microgravity research and manufacturing, and unlocking a new space economy for government, corporate, and private customers. We also take pride in offering exceptional food perks, with snacks, drip coffee & onsite barista, cold drinks, and dinner meals remaining free of charge, and lunch subsidized as part of Vast’s ongoing commitment to providing high-quality meals for employees.
Production Manager, Avionics Manufacturing Vast SpaceProduction Manager, Avionics ManufacturingLong Beach, CA$132,000–$188,000 / yearThis role leads frontline supervisors, technicians, and production personnel across multiple work centers and is accountable for meeting daily, weekly, and program-level production objectives while supporting continuous improvement and production scalability. Vast is developing next-generation space stations to ensure a continuous human presence in space for America and its allies, enabling advanced microgravity research and manufacturing, and unlocking a new space economy for government, corporate, and private customers.
Manufacturing Coordinator, Avionics First Shift Vast SpaceManufacturing Coordinator, Avionics First ShiftLong Beach, CA$18–$31 / hourVast is developing next-generation space stations to ensure a continuous human presence in space for America and its allies, enabling advanced microgravity research and manufacturing, and unlocking a new space economy for government, corporate, and private customers. We also take pride in offering exceptional food perks, with snacks, drip coffee & onsite barista, cold drinks, and dinner meals remaining free of charge, and lunch subsidized as part of Vasts ongoing commitment to providing high-quality meals for employees.
Manufacturing Coordinator, Avionics Second Shift Vast SpaceManufacturing Coordinator, Avionics Second ShiftLong Beach, CA$18–$30 / hourVast is developing next-generation space stations to ensure a continuous human presence in space for America and its allies, enabling advanced microgravity research and manufacturing, and unlocking a new space economy for government, corporate, and private customers. We also take pride in offering exceptional food perks, with snacks, drip coffee & onsite barista, cold drinks, and dinner meals remaining free of charge, and lunch subsidized as part of Vasts ongoing commitment to providing high-quality meals for employees.
Avionics Test Integration Engineer II Relativity Space IncAvionics Test Integration Engineer IILong Beach, CA$126,000–$172,500 / yearAbout the Role: You will own the design, release, integration, and maintenance of Avionics Test Infrastructure which includes ground support harnessing, test racks, and test fixtures supporting vehicle manufacturing and test ground support equipment. About the Team: The Avionics team is responsible for the full lifecycle of Terran R's nervous system, designing, building, testing, installing, and operating the hardware that connects and controls every major electrical system on the vehicle and ground.
Avionics Production Supervisor Relativity Space IncAvionics Production SupervisorLong Beach, CA$126,000–$174,000 / yearAbout the Team: The Avionics team is responsible for the full lifecycle of Terran R's nervous system, designing, building, testing, installing, and operating the hardware that connects and controls every major electrical system on the vehicle and ground. Engineers are deeply embedded into other functions within Relativity, working closely with propulsion, GNC, fluids, and stage engineering teams to ensure seamless integration and operation.
Avionics Integration & Test Engineer Starshield Space Exploration Technologies CorpAvionics Integration & Test Engineer StarshieldHawthorne, CA$105,000–$122,500 / yearITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. They must have a deep working knowledge of the satellite''s electrical architecture, factory checkouts, and the ability to investigate failed electrical hardware to determine root cause via telemetry and hardware investigations.
Avionics Manufacturing Engineer (PCB and PCBA) Impulse Space Propulsion Inc.Avionics Manufacturing Engineer (PCB and PCBA)Redondo Beach, CA$120,000–$145,000 / yearThis position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. As an Avionics Manufacturing Engineer at Impulse (PCB and PCBA), you will provide deep technical expertise on PCB and PCBA technology for spaceflight.
Avionics Manufacturing Engineer (PCB and PCBA) Impulse SpaceAvionics Manufacturing Engineer (PCB and PCBA)Redondo Beach, CA$120,000–$145,000 / yearThis position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. As an Avionics M anufacturing Engineer at Impulse (PCB and PCBA) , you will provide deep technical expertise on PCB and PCBA technology for spaceflight.
Avionics Mechanical Engineering Intern (Fall 2026) Impulse SpaceAvionics Mechanical Engineering Intern (Fall 2026)Redondo Beach, CA$32 / hourTo conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. You will work closely with electrical, propulsion, GNC, and vehicle structures engineers to execute on architectures and products that maximize overall vehicle performance.
Avionics Mechanical Engineer (All levels) Impulse SpaceAvionics Mechanical Engineer (All levels)Redondo Beach, CA$115,000–$150,000 / yearThis position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Lead and contribute to CoDRs, PDRs, and CDRs, clearly communicating design rationale, tradeoffs, and risks to cross-functional stakeholders.
Integration Engineer, Avionics Test VastIntegration Engineer, Avionics TestLong Beach, CaliforniaVast is developing next-generation space stations to ensure a continuous human presence in space for America and its allies, enabling advanced microgravity research and manufacturing, and unlocking a new space economy for government, corporate, and private customers. We also take pride in offering exceptional food perks, with snacks, drip coffee & onsite barista, cold drinks, and dinner meals remaining free of charge, and lunch subsidized as part of Vast’s ongoing commitment to providing high-quality meals for employees.
Avionics Electro-Mechanical Technicians - 100+ Openings The Structures CompanyAvionics Electro-Mechanical Technicians - 100+ OpeningsIrvine, CA$42–$45 / hourAs trusted partners to leading aerospace and defense OEMs and Tier 1 suppliers, we connect professionals with career opportunities to grow and excel in aviation, aerospace, and defense. Job Type: Long-term 12+ month contract with strong potential to convert to a full-time, direct position after 6 months for top performers.
Avionics Engineer JetZeroAvionics EngineerLong Beach, CaliforniaAs an Avionics Architecture Engineer, you will be responsible for helping create and integrate the full avionics suite for JetZero's aircraft by translating operator and airworthiness requirements, working with the avionics suppliers to implement those requirements, and going through the testing and integration process. This is only going to increase: Air travel is forecasted to double by 2050, while meaningful efficiency gains using current airplanes have hit a wall.
Senior Embedded Firmware Engineer (Avionics / Platform Interface) ProtingentSenior Embedded Firmware Engineer (Avionics / Platform Interface)Pasadena, CA$160,000–$200,000 / yearCustomize and integrate Jetson Linux platforms, including boot chain configuration, device tree updates, kernel bring-up, and MCU-to-Jetson interfaces. Customize and integrate Jetson Linux platforms, including boot chain, device tree, kernel bring-up, and MCU to Jetson interfaces.
NewManufacturing Coordinator, Avionics (Second Shift) Long Beach, California, United States Vast Space LLCManufacturing Coordinator, Avionics (Second Shift) Long Beach, California, United StatesLong Beach, CA$18–$25 / yearVast is developing next‑generation space stations to ensure a continuous human presence in space for America and its allies, enabling advanced microgravity research and manufacturing, and unlocking a new space economy for government, corporate, and private customers. Vast is looking for a Manufacturing Coordinator, Second Shift, reporting to the Manager, Manufacturing Operations to support Haven‑1 Manufacturing with the Integration team and the development of the systems that will be required for the design and build of artificial‑gravity human‑rated space stations.
Senior Avionics Specialist Mach IndustriesSenior Avionics SpecialistHuntington Beach, CAConduct board-level Fourier analysis (FFT/spectral analysis) and signal integrity evaluations using advanced test equipment to diagnose complex, intermittent, or elusive faults. Minimum of 5 years of hands-on experience in avionics/electronics troubleshooting and repair with strong emphasis on board-level and component-level diagnostics.