Safety & Environmental Specialist Kewaunee Scientific CorporationSafety & Environmental SpecialistStatesville, NCPart timeConducts OSHA, EPA, and DOT required training that includes but is not limited to Forklift, Hazardous Waste, Spill Prevention, Fall Protection, Confined Space, Fire Safety, Ergonomics, PPE, Hazard Communication and Lockout/Tagout. Previous education and / or certification(s) should include industrial hygiene, indoor/outdoor air quality, ergonomics/human factors, environmental toxicology, and epidemiology, management and occupation safety (OSHA regulations).
Safety Engineer Gaylor ElectricSafety EngineerStatesville, NCMust be able to wear personnel protective equipment (i.e., hard hat, safety glasses, gloves, high visibility vest, safety harness, etc.) when requiredAbility to bend, stoop, squat, crawl, climb, kneel, balance, push, pull, and reach overheadRepetitive use of arms, hands, and fingersPossess good vision/hearing (normal or corrected)Ability to make transition from designated employee parking areas to construction areas and be able to gain access to all levels of building/structure, even if only means of access is by OSHA approved site construction ladder or stairs still under construction but deemed safe for useAbility to work while constantly moving on one's feetAbility to reach and stretch to position equipment and fixtures while maintaining balanceAbility to work while sitting or standing for long periodsMust be able to lift up to 20 pounds at times. May require working in all elements (heat, cold, rain, snow, etc.) depending on job location and/or time of yearMust be able to utilize construction site sanitary facilities (port-o-lets)Must have required hand tools at all times while at work site (waist tool belts can weigh up to 30 lbs.)Must be able to work scheduled hours, 40 hours per week.
Safety Engineer Clark Construction GroupSafety EngineerCharlotte, North CarolinaSuccess in this role requires significant commitment, including flexibility to work extended hours, especially during critical project phases or client deadlines. The role does include desk time in the office that may require prolonged periods of sitting for tasks like computer work, document review, and meetings.
Environmental Health and Safety (EHS) Manager CaesarstoneEnvironmental Health and Safety (EHS) ManagerCharlotte, NCThis role requires frequent travel (up to 50%) to distribution centers, warehouses, and operational sites across the U.S. The position involves both office and industrial environments, including exposure to active warehouse and yard operations, forklift and crane operations heavy equipment, and truck traffic. 5+ years of combined experience in operations and EHS, With 10+ years of progressive EHS leadership experience within high-risk supply chain, transport, logistics, manufacturing, or heavy material handling environments.
Safety & Environmental Specialist KewauneeSafety & Environmental SpecialistStatesville, NCConducts OSHA, EPA, and DOT required training that includes but is not limited to Forklift, Hazardous Waste, Spill Prevention, Fall Protection, Confined Space, Fire Safety, Ergonomics, PPE, Hazard Communication and Lockout/Tagout. Previous education and / or certification(s) should include industrial hygiene, indoor/outdoor air quality, ergonomics/human factors, environmental toxicology, and epidemiology, management and occupation safety (OSHA regulations).
Safety Technician Gaylor ElectricSafety TechnicianCharlotte, NCScope of Work: Implements and enforces company and/or customer safety programs and procedures in order to reduce the frequency of work-related accidents and injuries with emphasis on aggressive prevention efforts for on-the-job accidents and injuries. Specialized Skills: High level interpersonal relationship skills, proficiency in communication skills, organization skills, and must be technology/computer proficient.
Safety Technician-Charlotte Infinity ContractorsSafety Technician-CharlotteCharlotte, North Carolina$22–$25 / hourThis entry-level position assists with field safety inspections, employee training, incident documentation, and regulatory compliance while working closely with project management and field operations. The ideal candidate is motivated to learn, possesses strong communication skills, demonstrates attention to detail, and is committed to promoting a positive safety culture throughout the organization.
Safety & Compliance Coordinator Carolina PanthersSafety & Compliance CoordinatorCharlotte, NCBachelor's degree in Business Administration, Occupational Safety, Compliance, or a related field (or equivalent work experience).2+ years of experience in a compliance, safety, or administrative role, preferably in a facility management or operational setting. Coordinate and oversee the maintenance and inspection of safety equipment (e.g., fire extinguishers, alarms, and emergency exits).Lead efforts to implement and maintain emergency response plans, including evacuation drills and incident reporting procedures.
Safety Carpenter Clark Construction GroupSafety CarpenterCharlotte, North CarolinaCut or saw boards, timbers, or plywood to required size, using handsaw, power saw, or woodworking machine. The work environment frequently involves exposure to moving mechanical equipment, high noise levels, dust, fumes, airborne particles, vibrations, and potential electrical hazards.
Safety Coordinator IES CommunicationsSafety CoordinatorMaiden, North CarolinaFull timeCurrent status as an Authorized OSHA OTI 500 Construction Outreach Trainer • CHST (Construction Health/Safety Technician) Certification or equivalent preferred • Excellent written and verbal communication skills • Proficient computer knowledge and experience utilizing MS Office (WORD, EXCEL, PowerPoint & Outlook) • Must be detail-oriented with high level organizational skills • Ability to communicate effectively with project stakeholders including field personnel, IES management and customer interfaces • Ability to respond as needed in support of all safety emergency situations with or without advance notice. Minimum Education: High School Overview: IES is a national provider of industrial products and infrastructure services to a variety of end markets, including electrical, mechanical and communications contracting solutions for the commercial, industrial, residential and renewable energy markets.
Safety Coordinator - Only Bilingual (English/Spanish) CASANOVA SIDING INCSafety Coordinator - Only Bilingual (English/Spanish)Charlotte, NCJob Site Inspections: perform scheduled and unscheduled visits to active job sites to identify unsafe conditions; generate documented corrective or preventive action items and follow up to confirm resolution. Emergency Protocol: develop, maintain, and implement a documented emergency response plan for all active job sites; ensure all site personnel are aware of emergency contacts, first aid resources, and evacuation procedures.
NewEnvironmental, Health, & Safety Supervisor SteffesEnvironmental, Health, & Safety SupervisorShelby, North CarolinaThis role will exercise independent judgement and decision-making authority over matters pertaining to incident response, incident remediation, Worker’s Compensation submissions, audit/ inspection cadence, and implementation and adherence to the EHS Management System in alignment with approved strategy and established policy/procedure. Position Summary: The primary role of the Environmental, Health, and Safety (EHS) Supervisor is to provide leadership for day-to-day operations for the facility EHS team, while providing guidance to internal customers on incident prevention, regulatory compliance, and promoting a strong EHS culture as defined through Mission Zero.
Sr. Supervisor Safety Six Flags Entertainment CorporationSr. Supervisor SafetyCharlotte, North CarolinaPart timeResponsibilities: Six Flags Entertainment Corporation is home to 19+ unique and exciting properties, so come join our world class team in the Charlotte Area at Carowinds. Make our guests happy by delivering amazing experiences and helping them create FUN lifelong memories.
Field Safety Consultant - OSHA 500 required Exceed SafetyField Safety Consultant - OSHA 500 requiredCharlotte, NCResponsibilities also include documenting safety inspections, citing dangerous areas/procedures and recommending corrective procedures, and maintaining safety equipment supply and availability. Inspect working conditions in manufacturing sites to ensure compliance with occupational safety and health regulations, as well as Exceed Safety LLC and our client’s requirements.
Safety Supervisor Wright Tree ServiceSafety SupervisorCharlotte, North CarolinaCorrects errors, reinforces safe actions and positive improvements, stops work when unsafe practices cannot be corrected as the work progresses, reports progress to General Foreperson and resorts to disciplinary action when needed, but works with General Foreperson and Human Resources if that occurs.• Works around excessive noise from machines, chainsaws, woodchipper and must wear proper personal protective equipment.• Is exposed to all temperatures and weather; will be exposed to nature, i.e., irritating plants, biting, or stinging insects, dust, etc.• May work on rough terrain.•
2026 Safety Technician Six Flags Entertainment Corporation2026 Safety TechnicianCharlotte, North Carolina$16–$17 / hourTemporaryResponsibilities: This position focuses mainly on providing a safe environment for guests and team members by routinely conducting building/ground inspections to assure regulatory compliance; responds to fires and other emergencies as needed; and investigates first aid incident reports as necessary. Our team members are crucial to providing guests with a variety of engaging activities that reflect and uphold our five core values of Courtesy, Service, Cleanliness, Safety, and Integrity and promote inclusion among all team members.
NewEnvironmental Health & Safety Intern The Whiting-Turner Contracting CoEnvironmental Health & Safety InternCharlotte, NCAssist in evaluating various planning/permits such as: Hot Work, Confined Space, Fall Protection, Excavation, Steel Erection, Energized Work, Pre-cast Tilt-Up as examples for effective and appropriate mitigation techniques. Work is conducted in both indoor office settings, and outdoor constructions jobsite settings requiring sitting, standing, walking, typing, carrying, pushing, bending.
Project Safety Adviser | Conover, NC HazTek Inc.Project Safety Adviser | Conover, NCCharlotte, North CarolinaWe offer full-time employment, stability, competitive benefits, professional development, travel, diverse safety experiences, management support and the added benefit of working with a network of over 275 full-time HazTek safety professionals. We are committed to building an environment of inclusion and acceptance which values diversity across all areas of the organization; an environment in which all employees can contribute to the success of the business and are valued for their skills, experience, and unique perspectives.
Safety And Operations Coordinator- Charlotte, NC Esco Group, Inc.Safety And Operations Coordinator- Charlotte, NCCharlotte, NCThe Safety & Operations Coordinator is responsible for supporting safe and efficient project execution through workforce coordination, safety administration, logistics management, documentation control, and plant interface activities. While performing the duties of this job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear.
Construction Manager II Adex CorporationConstruction Manager IICharlotte, NCExperience/Qualification Level Minimum of 3-5 years of experience: o Job-related experience with project builds over 200 sites Reports to CM3 (Lead) or IM Lead. Interfaces with External Interfaces: ASP/SP, Customer PM Internal Interfaces: IM Lead, Project Admin, Project Sponsor, CPM Responsibilities Include.