Adjunct Instructor for Ceramics Schreiner UniversityAdjunct Instructor for CeramicsKerrville, TXFor more information, please go through: https://schreiner.edu/job/adjunct-instructor-for-ceramics/ .
Student Employee - Dept of Art - Ceramics Studio Assistant (Work Study Available) Sam Houston State UniversityStudent Employee - Dept of Art - Ceramics Studio Assistant (Work Study Available)Huntsville, TXRequisition 202600222ST Title Student Employee - Dept of Art - Ceramics Studio Assistant (Work Study Available) Employee Class Student Employee College Work Study Position Yes Department Dept of Art Division Division of Academic Affairs Hours per week 20 Hiring Rate. The Department of Art is seeking applications for the position of Ceramics Studio Assistant to begin working in the Fall 2026 semester.
Advanced Engineer, Materials Science HyliionAdvanced Engineer, Materials ScienceAustin, TXYou'll dive into how these materials behave under extreme heat, high loads, and rapid cycling, then turn that insight into practical design guidance, additive manufacturing parameters, and durability improvements that directly influence engine performance. Day-to-day, you'll work closely with the KARNO engineering teams - mechanical, thermal, design, and additive - to evaluate new alloys, validate new processes, and help build Hyliion's internal additive materials program from the ground up.
Advanced Engineer, Materials Science Hyliion Holdings CorpAdvanced Engineer, Materials ScienceAustin, TXSkills and Abilities: • Hands-on experience with mechanical testing, microstructural evaluation, and failure analysis • Understanding of how material properties change with heat treatment, AM process changes, or post-processing steps • Familiarity with high-temperature alloys, surface treatments, coatings, and joining methods • Ability to evaluate metal integrity when parameters or processes shift • Strong analytical and problem-solving ability • Clear, concise technical communication • Comfortable working across disciplines (AM, thermal, mechanical, combustion, suppliers) • Detail-oriented with a research-driven mindset. You'll dive into how these materials behave under extreme heat, high loads, and rapid cycling, then turn that insight into practical design guidance, additive manufacturing parameters, and durability improvements that directly influence engine performance.
Senior Engineer, Materials (R5258) Shield AI IncSenior Engineer, Materials (R5258)Dallas, TX$110,000–$170,000 / yearAs part of the hardware reliability team, you'll work closely with design, manufacturing, and supply chain to lead materials development, understand failure mechanisms, define corrective actions, and eliminate recurrence across product design, manufacturing processes, and supply chain sourcing. What you'll do: Operate and continuously improve world-class materials and failure investigation laboratory spanning equipment including, but not limited to, SEM/EDS, x-ray, CT, optical microscopy, and cross-section preparation.
Sr. Materials Engineer, Functional Thin Films, Terafab Tesla IncSr. Materials Engineer, Functional Thin Films, TerafabAustin, TXYou will work at the intersection of ceramics science, thin-film processing, and device integration, developing materials with tailored electrical, thermal, optical, or mechanical properties. The team is seeking a Thin Film Functional Materials Engineer to develop and optimize advanced ceramic and functional thin-film materials for semiconductor and energy applications.
Research Assistant in Materials Science and Additive Manufacturing University of Texas Rio Grande ValleyResearch Assistant in Materials Science and Additive ManufacturingEdinburg, TXTitle: Graduate Research Assistant Assistantship Title: Research Assistant in Materials Science and Additive Manufacturing Job Class Code: 10095 FLSA: Exempt Minimum Qualifications Must be admitted to a graduate degree program Be in good academic standing Be registered full-time for the respective semester Nine semester credit hours during the fall semester Nine semester credit hours during spring semester Three semester credit hours during the summer sessions or in the required number of semester credit hours to fulfill the only remaining requirements on the degree plan. Posting Number: A1346 Working Title: Research Assistant in Materials Science and Additive Manufacturing Location: Edinburg, Texas College: College of Engineering and Computer Science Department: College of Engineering and Computer Science Manufacturing and Industrial Engineering Division Provost - Academic Affairs FTE: 5.
Senior Engineer: Powder Processing, Pressing, & Sintering MP Materials CorpSenior Engineer: Powder Processing, Pressing, & SinteringFort Worth, TXPosition Overview: MP Materials is seeking a hands-on Senior Engineer with responsibility for Powder Processing, Pressing, & Sintering to join the Magnet Technology group to support development technologies for advanced manufacturing to produce high-performance rare earth permanent magnets. Our products include both the critical materials used to make permanent magnets and the finished magnets themselves-enabling next-generation technologies in robotics, automation, aerospace, transportation, defense, and energy systems.
Industry Market Manager Material Science BrenntagIndustry Market Manager Material ScienceHouston, TexasThis role ensures that the right supplier partnerships, technologies, and product portfolios are in place to support customer innovation and commercial success within key Material Science segments, including coatings, adhesives, sealants, elastomers, composites, polymers, plastics, construction materials, electronics, and advanced materials. The IMM conducts business according to Brenntag's Core Values, building trust with suppliers and customers, ensuring safe and compliant business practices, communicating clearly, fostering collaboration, and driving operational and commercial excellence.
Senior Research Engineer (Materials) SorionSenior Research Engineer (Materials)Houston, TX$130,000–$150,000 / yearSorion is re-engineering how critical chemicals and materials are produced through a mechano-catalytic platform that replaces slow, high-energy, solvent-intensive steps with direct, high-efficiency solid-state processes. Experience working with inorganic materials ( e.g. , metals, ceramics, minerals) and either direct experience or strong working literacy in organic solid-state materials ( e.g. , molecular and crystalline specialty chemicals).
Material Sciences - Graduates - AI Training - US Prolific Academic LtdMaterial Sciences - Graduates - AI Training - USSan Antonio, TXWe've built a unique platform that connects researchers and companies with a global pool of participants, enabling the collection of high-quality, ethically sourced human behavioural data and feedback. We're looking for Materials Science Specialists to join our Expert Network to help train and evaluate cutting-edge AI models using real scientific expertise.
Material Sciences - Graduates - AI Training - USA Prolific Academic LtdMaterial Sciences - Graduates - AI Training - USAAustin, TXWe've built a unique platform that connects researchers and companies with a global pool of participants, enabling the collection of high-quality, ethically sourced human behavioural data and feedback. We're looking for Materials Science Specialists to join our Expert Network to help train and evaluate cutting-edge AI models using real scientific expertise.
Material Sciences - Graduates - AI Training - El Paso, US Prolific Academic LtdMaterial Sciences - Graduates - AI Training - El Paso, USEl Paso, TXWe've built a unique platform that connects researchers and companies with a global pool of participants, enabling the collection of high-quality, ethically sourced human behavioural data and feedback. We're looking for Materials Science Specialists to join our Expert Network to help train and evaluate cutting-edge AI models using real scientific expertise.
RESEARCH ENGINEER - SR. RESEARCH ENGINEER - Computational Materials Integrity Southwest Research InstituteRESEARCH ENGINEER - SR. RESEARCH ENGINEER - Computational Materials IntegritySan Antonio, TXRequirements: Requires a Masters or a PhD in Mechanical Engineering, Materials Science and Engineering, Structural Engineering, Computational Mechanics, Theoretical and Applied Mechanics, Aerospace Engineering, Engineering Mechanics, or similar engineering degree. 0-5 years: Experience in stress-intensity factor solutions, weight function methods, fatigue crack growth algorithms, time-dependent crack growth, small-crack growth mechanisms, threshold, shakedown, rainflow, environmental fatigue, and multi-point computational fracture mechanics.
Process Engineer I, II, or Senior, Texas Institute for Electronics The University of Texas at AustinProcess Engineer I, II, or Senior, Texas Institute for ElectronicsAustin, TexasHowever, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. With over $1 billion in funding from the US DoD and the state of Texas, we’re at the forefront of creating cutting-edge semiconductor manufacturing equipment and processes that will set the course for future advancements in semiconductor logic, memory, heterogeneous integration, chip cooling and more.
Materials Engineer - Failure Analysis Lab RTXMaterials Engineer - Failure Analysis LabTexasTeam members provide support to Raytheon programs, suppliers, and end users by conducting thorough investigations of failure events and supporting a variety of data collection activities to enable successful program execution and address the evolving needs of the electronics and defense industries. The candidate should possess some knowledge of the theory and operation of various analytical tools including SEM / Energy Dispersive Spectroscopy (EDS) / Wavelength Dispersive Spectroscopy (WDS), universal testing machines (e.g., Instron), thermal analysis tools, optical microscopes, focused ion beam (FIB), etc.
Sr. Materials Engineer, Silicon Wafer Engineering Starlink Space Exploration Technologies CorpSr. Materials Engineer, Silicon Wafer Engineering StarlinkTXWe are committed to offering access to high-speed internet to customers and are looking for a Materials Engineer to utilize their knowledge, experience, and creativity to solve materials and processing challenges in silicon wafer production for Starlink solar cells. • Operational and analytical proficiency with wafer bulk and surface characterization equipment, including ICP-MS, TXRF, SIMS, FTIR, GC-MS, SEM, resistivity mapping, and minority carrier lifetime testing (PL).
Materials Engineer in McKinney Failure Analysis Lab RTX CorpMaterials Engineer in McKinney Failure Analysis LabMcKinney, TXTeam members provide support to Raytheon programs, suppliers, and end users by conducting thorough investigations of failure events and supporting a variety of data collection activities to enable successful program execution and address the evolving needs of the electronics and defense industries. The candidate should possess some knowledge of the theory and operation of various analytical tools including SEM / Energy Dispersive Spectroscopy (EDS) / Wavelength Dispersive Spectroscopy (WDS), universal testing machines (e.g., Instron), thermal analysis tools, optical microscopes, focused ion beam (FIB), etc.
Senior Materials Scientist or Engineer InterluneSenior Materials Scientist or EngineerHouston, TX$125,000–$250,000Familiarity with and prior experience in the semiconductor, high-vacuum, tribology/bearings, high-voltage/electrostatic-discharge, or abrasive-wear (e.g., mining) industries are valuable but not required, as are space, planetary science, or aerospace backgrounds. Our engineering team combines expert knowledge of geological sciences, mechanical engineering, automation, systems engineering, modeling and simulation, and advanced fabrication to build the infrastructure that will create an in-space economy.
Materials Engineer II ICON Technology IncMaterials Engineer IIAustin, TXAny and all information provided will be considered confidential, will be kept separate from your application and/or personnel file, and will only be used in accordance with applicable laws, orders and regulations, including those that require the information to be summarized and reported to the federal government for civil rights enforcement purposes. D. in Civil Engineering or Material Science (with a focus on cement-based materials), or Master's with 3+ years of industry experience, or BS in Civil Engineering /Material Science Engineering with 5+ years of industry experience.
Materials Scientist or Engineer Interlune CorpMaterials Scientist or EngineerHouston, TX$125,000–$195,000 / yearThis role will evaluate how dust, vacuum, thermal extremes, radiation, charging, and regolith interaction affect material performance, wear, and lifetime, and will translate those findings into material selection, qualification, testing, and design guidance for exposed hardware. Our engineering team combines expert knowledge of geological sciences, mechanical engineering, automation, systems engineering, modeling and simulation, and advanced fabrication to build the infrastructure that will create an in-space economy.
Engineer, Metallurgical MP Materials CorpEngineer, MetallurgicalFort Worth, TXThe Engineer will be responsible for developing, validating, and optimizing methods to characterize metallurgical and magnetic specimens, including SEM-EDS, EBSD, XRD, metallography, DSC/TGA, mechanical testing, dilatometry, magnetometry, and more. Position Overview: We are seeking a highly skilled and motivated characterization-minded Engineer to join the Magnet Technology group to support development technologies for advanced manufacturing to produce high-performance rare earth permanent magnets.
Corrosion and Materials Engineer INEOS Automotive LtdCorrosion and Materials EngineerLeague City, TX$161,100–$200,365 / yearThe Corrosion & Materials Engineer is recognized as a technical authority within INEOS and is expected to actively participate in relevant industry forums and committees, including API committees and NACE/AMPP corrosion groups, ensuring that O&P remains aligned with emerging codes, NDE technologies, and best practices in materials science, corrosion control, and welding engineering. Collaborate with the Chief Inspector and site inspection teams to ensure damage mechanisms are properly identified, monitored, and managed through appropriate inspection plans and techniques; collaborate with site process engineering and operations to understand how process conditions, upsets, and operating envelopes affect damage mechanisms and corrosion rates.
Sr. Materials Engineer, Silicon Crystal Growth Starlink Space Exploration Technologies CorpSr. Materials Engineer, Silicon Crystal Growth StarlinkTXWe are committed to offering access to high-speed internet to customers and are looking for a Materials Engineer to utilize their knowledge, experience, and creativity to solve materials and processing challenges in silicon crystal growth and wafer production for Starlink solar cells. • Proficiency in silicon ingot/wafer characterization techniques and equipment, including ICP-MS, GDMS, XRT, SEM/TEM, FTIR, resistivity mapping, and minority carrier lifetime testing (PL).
Materials Engineer, Polymers Starlink Space Exploration Technologies CorpMaterials Engineer, Polymers StarlinkTXITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. We are committed to offering access to high-speed internet to customers, and are looking for a Polymers Engineer to utilize their knowledge, experience, and creativity to solve material selection and processing challenges as we ramp service.
Materials Engineer, Metals Starship Space Exploration Technologies CorpMaterials Engineer, Metals StarshipTXITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. This challenge isn't for everyone - the working conditions can be hard on a desolate beach at the southernmost tip of the state - but hardcore projects require hardcore people.
NewMaterials Engineer, AI Satellites Starmind Space Exploration Technologies CorpMaterials Engineer, AI Satellites StarmindBastrop, TXWe develop nearly every key piece of technology in house - from the satellites' flight computers and power systems to the fully custom compute electronics, memory, and networking that form the brain of our on-orbit data centers. SpaceX is leveraging its experience deploying and operating the world's largest satellite constellation to develop Starmind, a new constellation of satellites capturing solar energy in space to power low-cost, high-performance AI compute for Earth.
Senior Materials and Failure Analysis Technician (SIMS) Coherent CorpSenior Materials and Failure Analysis Technician (SIMS)Sherman, TXTo have close visual acuity, with or without corrective lenses, to perform an activity such as: preparing and analyzing data and figures; transcribing; focusing microscopic images on a microscope or at a computer terminal; extensive reading; visual inspection involving small defects, small parts, and/or operation of precision positioning probes; using measurement devices; and/or assembly or destructive analysis of parts at distances close to the eyes. Perform advanced materials characterization and failure analysis activities on semiconductor, photonic, and optoelectronic devices using analytical tools such as SIMS, optical microscopy, SEM, FIB, probe stations, FTIR, and other laboratory equipment as required.
Sr. Materials Engineer, Metals Starship Space Exploration Technologies CorpSr. Materials Engineer, Metals StarshipTXITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. This challenge isn't for everyone - the working conditions can be hard on a desolate beach at the southernmost tip of the state - but hardcore projects require hardcore people.
NewSr. Materials Engineer, AI Satellites Starmind Space Exploration Technologies CorpSr. Materials Engineer, AI Satellites StarmindBastrop, TXSpaceX is leveraging its experience deploying and operating the world's largest satellite constellation to develop Starmind, a new constellation of satellites capturing solar energy in space to power low-cost, high-performance AI compute for Earth. We develop nearly every key piece of technology in house - from the satellites' flight computers and power systems to the fully custom compute electronics, memory, and networking that form the brain of our on-orbit data centers.
Sr. Tooling Design Engineer, Investment Casting Space Exploration Technologies CorpSr. Tooling Design Engineer, Investment CastingTXITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. You will design complex tooling that must repeatedly deliver extremely tight tolerances and intricate internal cooling geometries while supporting aggressive rate and cost targets.
Corrosion and Materials Engineer Ineos AGCorrosion and Materials EngineerLa Porte, TX$161,100–$200,365 / yearThe Corrosion & Materials Engineer is recognized as a technical authority within INEOS and is expected to actively participate in relevant industry forums and committees, including API committees and NACE/AMPP corrosion groups, ensuring that O&P remains aligned with emerging codes, NDE technologies, and best practices in materials science, corrosion control, and welding engineering. Collaborate with the Chief Inspector and site inspection teams to ensure damage mechanisms are properly identified, monitored, and managed through appropriate inspection plans and techniques; collaborate with site process engineering and operations to understand how process conditions, upsets, and operating envelopes affect damage mechanisms and corrosion rates.
Sr. Staff Materials Engineer, Semiconductor & Thin Films, Terafab Tesla IncSr. Staff Materials Engineer, Semiconductor & Thin Films, TerafabAustin, TXThis is a high-impact technical leadership role requiring deep expertise in semiconductor materials science and a track record of driving complex programs from research to production. In this role, you will lead materials innovation from concept through high-volume manufacturing, defining strategy for materials selection, characterization, and qualification across thin-film deposition platforms.
Senior Materials and Failure Analysis Technician (SIMS) II-VI Optical Systems, Inc.Senior Materials and Failure Analysis Technician (SIMS)Sherman, TXTo have close visual acuity, with or without corrective lenses, to perform an activity such as: preparing and analyzing data and figures; transcribing; focusing microscopic images on a microscope or at a computer terminal; extensive reading; visual inspection involving small defects, small parts, and/or operation of precision positioning probes; using measurement devices; and/or assembly or destructive analysis of parts at distances close to the eyes. Perform advanced materials characterization and failure analysis activities on semiconductor, photonic, and optoelectronic devices using analytical tools such as SIMS, optical microscopy, SEM, FIB, probe stations, FTIR, and other laboratory equipment as required.
Senior Materials and Processes Engineer Mclaurin AerospaceSenior Materials and Processes EngineerHouston, TXFull timePrevious experience in material selection (metallics and nonmetallics) for electrical components, corrosion prevention, flammability prevention, oxygen compatibility, processes qualification, contamination control, development, test, and evaluation for NASA and/or aerospace projects. Knowledge in materials and processes for space applications, including materials selection (metallics and nonmetallics), design for corrosion prevention and electrical bonding, failure analysis, heat treatment, adhesive bonding, contamination control, etc.
Corrosion and Materials Engineer Ineos UsaCorrosion and Materials EngineerLeague City, Texas$161,100–$200,365 / yearThe Corrosion & Materials Engineer is recognized as a technical authority within INEOS and is expected to actively participate in relevant industry forums and committees, including API committees and NACE/AMPP corrosion groups, ensuring that O&P remains aligned with emerging codes, NDE technologies, and best practices in materials science, corrosion control, and welding engineering. Collaborate with the Chief Inspector and site inspection teams to ensure damage mechanisms are properly identified, monitored, and managed through appropriate inspection plans and techniques; collaborate with site process engineering and operations to understand how process conditions, upsets, and operating envelopes affect damage mechanisms and corrosion rates.
NewWelding Specialist Engineer TechnipFMC PlcWelding Specialist EngineerHouston, TXYou are meant for this job if: Essential Professional Qualification / Experience: Bachelor's or Master's degree in Welding engineering, Materials Science, Metallurgical Engineering, Mechanical Engineering, or a related field. Strong knowledge of welding processes & technologies, material properties, testing methods, and fabrication techniques and NDT processes.
NewGlobal Account Manager - Semiconductor Materials Michael Page InternationalGlobal Account Manager - Semiconductor MaterialsTexas$160,000–$175,000 / yearFull timeThe successful candidate will possess a rare blend of technical expertise and commercial leadership, allowing them to engage effectively with engineering, operations, procurement, and executive stakeholders while driving long-term business growth. The role will serve as the primary commercial interface between the customer and the organization's global business units, coordinating strategy, growth initiatives, product expansion efforts, and executive-level relationships across multiple regions.
Materials Lab Technician INSPYR SolutionsMaterials Lab TechnicianHouston, TXInformation collected and processed through your application with INSPYR Solutions (including any job applications you choose to submit) is subject to INSPYR Solutions’ Privacy Policy and INSPYR Solutions’ AI and Automated Employment Decision Tool Policy: https://www.inspyrsolutions.com/policies/ . By always striving for excellence and focusing on the human aspect of our business, we work seamlessly with our talent and clients to match the right solutions to the right opportunities.
Engineering Technician, Battery Metals & Materials Tesla IncEngineering Technician, Battery Metals & MaterialsTXThe ideal candidate will have a proven track record of agility in addressing quality issues and partnering with manufacturing teams to ensure product quality control, while inspiring peak performance from the team. The role is highly dynamic, and you will have the opportunity to use a range of advanced analytical tools including ICP, XRF, AAS, BET, PSA, CS Analysis, XRD, titration etc.
Engineering Technical, Battery Metals & Materials Tesla IncEngineering Technical, Battery Metals & MaterialsTXWet chemistry treatment includes elevated temperature and pressure autoclave leaching, high pressure, and atmospheric reactor, physicochemical precipitation, clarification, filtration. Candidates will be the primary technical contact for one or more processing steps and unit operations by assisting in the day-to-day operation of integrated, lab/pilot facility.
Lead, Applications Engineer, Silicon Carbide Materials Entegris IncLead, Applications Engineer, Silicon Carbide MaterialsTXWhat We Seek: Master's degree in Materials Science, Mechanical Engineering, or Chemical Engineering with at least 3 years of experience; or a Bachelor's degree in Materials Science, Mechanical Engineering, or Chemical Engineering with at least 5 years of experience; or 10+ years of experience in SiC wafer manufacturing, LED manufacturing, or wide bandgap semiconductor processing. The product development effort will include the characterization of various grades of graphite, silicon carbide, and coatings and working with potential customers to validate these materials in their equipment.
Engineer, Magnet Technology MP Materials CorpEngineer, Magnet TechnologyFort Worth, TXOur products include both the critical materials used to make permanent magnets and the finished magnets themselves-enabling next-generation technologies in robotics, automation, aerospace, transportation, defense, and energy systems. Position Overview: MP Materials is seeking a hands-on Engineer to join the Magnet Technology group to support development technologies for advanced manufacturing to produce high-performance rare earth permanent magnets.
Materials Engineer I Paligen TechnologiesMaterials Engineer IGarland, TexasJob Title: Materials Engineer I Job Family: Engineering / Materials Engineering Company: Paligen Technologies Location: Garland, TX onsite Job Summary: Designs, develops and modifies processes and methods for the manufacture, testing and inspection of metallic, plastic, composite and other materials for aerospace and defense applications. Conduct investigations of non-conforming products; Bomb components, products and processes & Specialty Products.
Postdoctoral Research Associate Texas State UniversityPostdoctoral Research AssociateSan Marcos, TXThe successful candidate will work on cutting-edge research projects focused on ultrawide bandgap materials (e.g., diamond, III-nitrides, and GaO), advancing next-generation electronic devices through innovations in thin film epitaxy, doping, interface engineering, and laser-based processing to achieve superior performance, thermal management, and energy efficiency in high-power and high-frequency applications. Our research integrates advanced thin-film growth, laser-based processing, doping strategies, and interface engineering to enable energy-efficient, radiation-hardened, and thermally robust electronic systems, with applications spanning power electronics, space systems, and national defense technologies.
Materials Quality Engineer, Texas Institute for Electronics The University of Texas at AustinMaterials Quality Engineer, Texas Institute for ElectronicsAustin, TXHowever, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. This Materials Quality Engineer is responsible for continuous tracking of material usage for the FAB, verification of material CoA data, managing and optimizing the supplier quality efforts, correlation of material quality to final product quality, and coordination of critical semiconductor manufacturing materials for uninterrupted FAB operations.
Product Engineer Horiba LtdProduct EngineerPasadena, TXGlow Discharge Optical Emission Spectroscopy: GD-Profiler 2. Evaluation of Hydrogen and Ammonia Engine / Gas Turbine for Power Generation. E53 - 2019 Masao Horiba Awards - Advanced Analytical and Measurement Technologies for Efficient Control System to Maximize the Performance of Electric Power and Batteries Usage.
Postdoctoral Research Associate - CAAAM University of North Texas SystemPostdoctoral Research Associate - CAAAMDenton, TexasFamiliarity with one or more material diagnostic techniques such as infrared imaging and spectroscopy, thermal imaging, Raman spectroscopy for metals and ceramics, plasma emission spectroscopy, non-destructive ultrasonic spectroscopy and testing of materials, transient laser spectroscopy as well as other diagnostic methods will be preferred. The candidate will assist in advancing necessary instrumentation for data collection and analysis, integrating process diagnostics with closed-loop process control of AM platforms, and work with fellow researchers to implement machine learning algorithms based on in-situ data collection and analysis.
Reliability Engineer - Advanced Thermal Management Coherent CorpReliability Engineer - Advanced Thermal ManagementTXSupport reliability test methods including thermal cycling, thermal shock, high-temperature exposure, humidity, corrosion, pressure cycling, leak testing, coolant compatibility, mechanical fatigue, and bond/interface reliability. Lead and manage reliability test planning and execution for semiconductor packaging, liquid cold plates, T800 Thermadite, CVD diamond, thermal spreaders, embedded cooling structures, and related thermal assemblies.
Postdoctoral Research Associate - CAAAM UNIVERSITY OF NORTH TEXAS SYSTEMPostdoctoral Research Associate - CAAAMDenton, TXFamiliarity with one or more material diagnostic techniques such as infrared imaging and spectroscopy, thermal imaging, Raman spectroscopy for metals and ceramics, plasma emission spectroscopy, non-destructive ultrasonic spectroscopy and testing of materials, transient laser spectroscopy as well as other diagnostic methods will be preferred. The candidate will assist in advancing necessary instrumentation for data collection and analysis, integrating process diagnostics with closed-loop process control of AM platforms, and work with fellow researchers to implement machine learning algorithms based on in-situ data collection and analysis.