Senior Process Safety/Chemical Engineer Eastern Research Group IncSenior Process Safety/Chemical EngineerRaleigh, NC$110,000–$155,000 / yearReview and interpret technical engineering documentation, including but not limited to: offsite consequence analyses (OCAs), process safety information; process hazard analyses (PHAs); operating procedures; training records; mechanical integrity programmatic records; management of change (MOC) and pre-startup safety review (PSSR) packages; compliance audits; incident investigations; employee participation plans; hot work permits; contractor management plans; and emergency response programs and procedures. The ideal candidate will be responsible for leading technical engineering and compliance investigations in relation to Section 112(r) of the Clean Air Act (both the General Duty Clause and RMP), as well as applicable Emergency Preparedness and Community Right-to-Know Act (EPCRA) and Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) requirements.
Chemical Engineer (at Gelest) GelestChemical Engineer (at Gelest)Morrisville, North CarolinaInterface with Operations, Engineering, Management, internal customers, and suppliers to ensure process improvements and projects are technically sound, cost‑effective, and aligned with production goals. Analyze and improve unit operations including heat exchange/heat transfer, distillation, filtration, and reaction systems to enhance efficiency, yield, quality, and reliability.
Chemical Engineer Fall Co-op The ChemoursChemical Engineer Fall Co-opFayetteville, North CarolinaIn key sectors such as clean energy, advanced electronics, high-performance computing and AI, climate friendly cooling, and high-quality paints and coatings for homes and industrial infrastructure---sustainable solutions and more modern living depend on Chemours chemistry. As we create a colorful, capable and cleaner world through chemistry, we invite you to join our team to harness the power of chemistry to shape markets, redefine industries and improve lives for billions of people around the world.
Chemical Engineer Fall Co-op Chemours CoChemical Engineer Fall Co-opFayetteville, NCIn key sectors such as clean energy, advanced electronics, high-performance computing and AI, climate friendly cooling, and high-quality paints and coatings for homes and industrial infrastructure---sustainable solutions and more modern living depend on Chemours chemistry. As we create a colorful, capable and cleaner world through chemistry, we invite you to join our team to harness the power of chemistry to shape markets, redefine industries and improve lives for billions of people around the world.
Chemical Engineer Actalent IncChemical EngineerSpencer, NC$70,000–$170,000 / yearThe role involves frequent collaboration with Operations, EHS, Maintenance, and Site Leadership in a fast-paced setting that balances long-term strategic initiatives with urgent operational priorities. Lead advanced process engineering activities, including mass and energy balances, development and review of PFDs and P&IDs, reaction engineering, separations, and heat and mass transfer analysis.
Chemical Process Project Engineer INX International Ink CompanyChemical Process Project EngineerCharlotte, NCStrong knowledge of chemical processing equipment such as: Mixers and reactors; Mills and dispersers; Pumps and heat exchangers; Filtration systems; Thermal Reactions; Process Pipe Design using fluid dynamics; Heating and Cooling Design using Specific Heat, Thermal Conductivity, product Viscosity, Experience with capital project execution and plant equipment installation. To perform your job as expected, you will be required to have: Bachelor's degree (B.S.) in Chemical Engineering or related engineering discipline from 4-year college or university; and 3-10 years related experience and/or training in chemical manufacturing, process engineering, or industrial project engineering.
Sr. Chemical Process Engineer Endo Pharmaceuticals IncSr. Chemical Process EngineerRaleigh, NCSkills/Competencies: Demonstrated technical and leadership skills including oral/written communications, conflict resolution, decision making and sufficient financial acumen to interpret cost analyses and other reports. With 4,000+ team members worldwide, we lead with pride and purpose-prioritizing quality and safety while fostering a culture of continuous improvement, accountability, and teamwork.
Chemical PSM Engineer Cooperidge Consulting FirmChemical PSM EngineerGreenville, North CarolinaThe position requires extensive technical expertise in PSM-regulated industries, driving continuous improvement strategies related to performance, Management of Change (MOC), corrective actions, audits, and regulatory compliance across production, maintenance, EHS, and projects. Support site PHA Facilitators by providing necessary training in HazOps, Safety Integrity Levels (SIL), Safety Requirements Specifications (SRS), and Safety Instrumented Systems (SIS).
Engineer III, OSD Manufacturing (Chemical/Electrical Engineering) Biogen IncEngineer III, OSD Manufacturing (Chemical/Electrical Engineering)NC$77,000–$100,000 / yearRegular employees are eligible to receive both short term and long-term incentives, including cash bonus and equity incentive opportunities, designed to reward recent achievements and recognize your future potential based on individual, business unit and company performance. You will partner closely with manufacturing, maintenance, and cross-functional teams to troubleshoot issues, lead equipment-related projects, and ensure successful validation and implementation of new or modified systems.
Principal Exposure Data Scientist - Chemical Insights Research Institute Lucas James Talent PartnersPrincipal Exposure Data Scientist - Chemical Insights Research InstituteMorrisville, North CarolinaThis role focuses on developing data analysis pipelines, ensuring efficient data exchange and interoperability across diverse platforms and scientific disciplines, and applying advanced machine learning/AI methods and statistical frameworks to identify and quantify trends or patterns in complex, large scale datasets. The Principal Exposure Data Scientist works closely with CIRI scientists and external collaborators to deliver high-quality scientific data that inform chemical exposure assessment, risk assessment, regulatory decisions, and public health guidance.
Principal Exposure Data Scientist - Chemical Insights Research Institute UL Research InstitutesPrincipal Exposure Data Scientist - Chemical Insights Research InstituteMorrisville, North CarolinaThis role focuses on developing data analysis pipelines, ensuring efficient data exchange and interoperability across diverse platforms and scientific disciplines, and applying advanced machine learning/AI methods and statistical frameworks to identify and quantify trends or patterns in complex, large scale datasets. The Principal Exposure Data Scientist works closely with CIRI scientists and external collaborators to deliver high-quality scientific data that inform chemical exposure assessment, risk assessment, regulatory decisions, and public health guidance.
Senior Consultant, Industry Solutions, Process Mining - Energy & Chemicals Deloitte Touche Tohmatsu LtdSenior Consultant, Industry Solutions, Process Mining - Energy & ChemicalsCharlotte, NCMinimum 2 years working knowledge/understanding of databases, ETL, SQL and PQL skills required to deliver process mining projects • Minimum 2 years hands on experience on various process capabilities such as process mapping, process transformation and process sustainability • Certifications in process mining e.g., Celonis Data Engineer, Celonis Analyst are a plus • Celonis OCPM trained and experienced • Understanding of how BPM and BI tools operate and a demonstrable experience of various tools within this area (e.g., Minitab, PowerBI, Cognos BI, Tableau, QlikView, etc.) • Lean Six Sigma Certification preferred. Senior Consultants perform detailed quantitative and qualitative analysis work associated with developing meaningful insights to address client's biggest challenges around cost management, operational efficiencies, process effectiveness and improved competitiveness.
Chemical Technical Support Representative - APS Parker Hannifin CorpChemical Technical Support Representative - APSCARY, NCThis role will provide intermediate to advanced commercial and technical support for automotive, industrial, and electronics assembly customers, qualify leads with product guidance, and generate sales opportunities for the external sales team and distribution channels. For more information on our APS Division, you can check out our website: https://www.parker.com/us/en/divisions/assembly-and-protection-solutions-division.html.
Process Engineer Charlotte Extraction LabsProcess EngineerPineville, North CarolinaMust be comfortable balancing engineering analysis with hands-on work in a manufacturing environment and spending significant time on the production floor learning processes, gathering data, troubleshooting issues, and collaborating with operations teams. Production/Operations Process Engineer wanted to support process development, optimization, scale-up, and continuous improvement for an innovative and rapidly scaling manufacturer in Gaston County.Process Engineer Charlotte Extraction Labs LLCProcess EngineerPineville, NCFull timeMust be comfortable balancing engineering analysis with hands-on work in a manufacturing environment and spending significant time on the production floor learning processes, gathering data, troubleshooting issues, and collaborating with operations teams. Production/Operations Process Engineer wanted to support process development, optimization, scale-up, and continuous improvement for an innovative and rapidly scaling manufacturer in Gaston County.Engineer IMCS Group IncEngineerLiberty, NCReporting to Engineering Manager the person in this role will support the PE-BME Battery Cell Department's mission to deliver engineering solutions for rapid competitiveness improvements through safety first, people development, and customer focus. Utilizing and improving systems & procedures for efficient and effective issue identification, root cause analysis, issue resolution, and reoccurrence prevention / kaizen to subsequent activity and projects.Automation Engineer I/II, Sr. Automation Engineer I / II, Principal Automation Engineer Grifols SAAutomation Engineer I/II, Sr. Automation Engineer I / II, Principal Automation EngineerClayton, NCLevel II, Sr Level I (Proficient Level) Sr Level II, Principal (Expert Level): GxP Understanding - Compliance, Change Control, Quality Oversight, Validation; Utilities - WFI, CSG, Steam, HVAC, Chillers, Air, Chemical Tank Farm, Water, WWTP, Alcohol/Ethanol; Manufacturing - Fractionation, Purification, CIP, UF, Process, Chromatography; Sterile Filling - Filling, Autoclave, Sterilization Tunnels, Freeze Drying, Pasteurizer, Glass Washer; Packaging - Serialization, Packaging Equipment, Optics; Continual Improvement - Optimize and implement process improvements; Operational support - Provide support for process issues; and, Troubleshooting issues with operational areas and systems. Maintains accountability; Oversee employee career path, training plan, performance evaluation, and development opportunities; Oversee employee career path, training plan, performance evaluation, and development opportunities; Coaches, counsels, manages and directs personnel in appropriate assignments relative to priorities, sense of urgency and utilization of skill sets.Water Treatment Process Engineer GFT Infrastructure IncWater Treatment Process EngineerRaleigh, NC$80,000–$180,000 / yearIn this capacity, the successful candidate will be responsible for the following: System Design:Lead and support the planning and process evaluation of potable water treatment processes, including intakes and raw water pump stations, coagulation, flocculation, sedimentation, disinfection, filtration, iron and manganese removal, PFAS treatment, chemical systems, and process wastewater and residuals handling. Experience in the planning and execution of projects: including project approach and resource needs, options analysis, process and equipment design, and engineering document development through the project delivery phases of plan, design, procure, construct, and commissioning.Wastewater Treatment Process Engineer GFT Infrastructure IncWastewater Treatment Process EngineerRaleigh, NC$80,000–$180,000 / yearUse processes such as physical/chemical primary treatment, conventional activated sludge, biological nutrient removal, fixed-film processes, membrane bio-reactors (MBR), sidestream treatment, tertiary filtration, auxiliary wet-weather treatment, and disinfection. In this capacity, the successful candidate will be responsible for the following: System Design:Lead and support the planning and process evaluation of wastewater processes, including biological nutrient removal, sludge handling, and filtration processes.Advanced Manufacturing Engineer - Capital Projects & Process Improvement Altec Industries, Inc.Advanced Manufacturing Engineer - Capital Projects & Process ImprovementCreedmoor, NCp>This experienced (4+ years) Manufacturing Engineer will support Altec Creedmoor Divisions Plant 24C, which specializes in the manufacture of composite (fiberglass) and steel components for utility truck mounted aerial device assemblies manufactured on site in downstream plants. Altec specializes in the manufacture, sale and service of aerial devices, digger derricks, cranes and specialty equipment for the electric utility, telecommunications, tree care, construction, and light and sign maintenance industries in more than 120 countries.Immediate Job Opportunity for Process Engineer III The Fountain Group LLCImmediate Job Opportunity for Process Engineer IIIWilson, NCServe as Process Engineering Expert to develop business based technology solutions and provide integrated equipment, utility, and facility engineering expertise with an operational focus to support execution of strategic and key CAPEX manufacturing projects, driving ‘right first time’ start up and execution. Provide integrated equipment, utility, and facility engineering expertise with an operational focus in support of technology transfer and manufacturing projects to support ‘right first time’ execution and start up.Process Engineer - 3 Integrated Resources, IncProcess Engineer - 3Wilson, NCServe as Process Engineering Expert to develop business based technology solutions and provide integrated equipment, utility, and facility engineering expertise with an operational focus to support execution of strategic and key CAPEX manufacturing projects, driving ‘right first time’ start up and execution. Provide integrated equipment, utility, and facility engineering expertise with an operational focus in support of technology transfer and manufacturing projects to support ‘right first time’ execution and start up.Engineer 4 - Process Net2SourceEngineer 4 - ProcessWilson, NC$72–$72.40 / hourServe as Process Engineering Expert to develop business based technology solutions and provide integrated equipment, utility, and facility engineering expertise with an operational focus to support execution of strategic and key CAPEX manufacturing projects, driving 'right first time' start up and execution. Provide integrated equipment, utility, and facility engineering expertise with an operational focus in support of technology transfer and manufacturing projects to support 'right first time' execution and start up.NewProcess Engineer Graham Personnel ServicesProcess EngineerKernersville, NCThis position focuses on identifying production losses, conducting time studies, analyzing manufacturing data, improving throughput, increasing efficiency, and driving sustainable process improvements. QualificationsBachelor's degree in Industrial Engineering, Mechanical Engineering, Manufacturing Engineering, Chemical Engineering, or a related engineering discipline.KBI: US - Process Engineer III KBI Biopharma IncKBI: US - Process Engineer IIIDurham, NCAct the technical subject matter expert (SME) for upstream and/or downstream equipment and the site clean utilities ensuring proper installation, qualification, and maintenance of these systems. As a Process Engineer, you will act as member of a cross-functional team to support implementation of new systems and improvements to existing manufacturing processes and equipment.Advanced Process Engineer Celanese International CorporationAdvanced Process EngineerWilmington, North CarolinaThe role provides technical expertise and knowledge to the manufacturing process, including raw materials, equipment, and processes, and implements new technologies, processes, and raw materials. Assist the Technology Leader with site product quality, including run plans, finished product quality performance, and quality RCAs.Industrial Wastewater Staff Process Mechanical Engineer Arcadis NVIndustrial Wastewater Staff Process Mechanical EngineerRaleigh, NC$70,800–$123,600 / yearIn this role, you will have the opportunity to: • Function as the process engineer on industrial water/wastewater projects • Apply processes and technologies for physical/chemical primary treatment, biological treatment, membrane treatment, adsorption filtration, disinfection, thermal evaporation, and crystallization • Receive technical mentoring and guidance from a senior process engineer • Delegate engineering or scientific calculations, drawings to junior staff • Collaborate with multi-disciplinary design teams to implement complex treatment solutions • Support implementation of projects from study phase through design, construction, startup, and commissioning, and operation and maintenance of treatment systems. Arcadis Industrial Water Treatment and Optimization (IWTO) team is seeking a mid-level Industrial Water Process Engineer with 5 years of consulting engineering experience to contribute to our expanding portfolio of industrial water and wastewater related design projects.Associate Process Engineer, (JP13534) 3 Key ConsultingAssociate Process Engineer, (JP13534)Holly Springs, North CarolinaWorking closely with multiple subject areas, including manufacturing, process engineering, process development, utility operations, maintenance, quality assurance, and validation to implement operational improvements. • Lead the development of calibration/maintenance programs, ensure the availability of spare parts, and coordinate maintenance execution as necessary to ensure systems are in proper working order.Engineer HireTalentEngineerLiberty, NCReporting to Engineering Manager the person in this role will support the PE-BME Battery Cell Department's mission to deliver engineering solutions for rapid competitiveness improvements through safety first, people development, and customer focus. Utilizing and improving systems & procedures for efficient and effective issue identification, root cause analysis, issue resolution, and reoccurrence prevention / kaizen to subsequent activity and projects.NewProcess Engineer Intellectt INCProcess EngineerWilm, NCThe selected candidates will serve as Process System Owners (SMEs) responsible for the design, implementation, commissioning, startup, and operational support of critical GMP manufacturing systems. Duration: 12-Month ContractPosition Summary: Seeking experienced Process Engineers to support a large-scale greenfield biologics manufacturing facility in the Raleigh-Durham area.Description Process Engineer Salas O'Brien Engineers IncDescription Process EngineerRaleigh, NCOur specialized experience includes design for data centers, healthcare, science and technology, high-rise buildings, clean energy, education, and other building types as well as structural and building sciences, infrastructure asset management, advanced robotics, and more. The Process Engineer will provide technical support to Engineering Design, Construction Management, and CQV/Start-up teams on facility and process projects within regulated manufacturing environments, including pharmaceutical and life sciences facilities operating under cGMP requirements.Associate Process Engineer - Biopharma (JP13416) 3 Key ConsultingAssociate Process Engineer - Biopharma (JP13416)Holly Springs, North CarolinaWorking closely with multiple subject areas, including manufacturing, process engineering, process development, utility operations, maintenance, quality assurance, and validation to implement operational improvements. Lead the development of calibration/maintenance programs, ensure the availability of spare parts, and coordinate maintenance execution as necessary to ensure systems are in proper working order.NewSenior Water/Wastewater Process Engineer #3572374 Axiom PathSenior Water/Wastewater Process Engineer #3572374Charlotte, North CarolinaJoin a leading, multi-disciplinary design and engineering organization known for delivering impactful infrastructure and community-focused projects across the Southeast. Teams are highly collaborative and mission-driven, working on projects that directly improve public health, environmental resilience, and quality of life.Lead Process Engineer - API Small Molecule Exyte GmbHLead Process Engineer - API Small MoleculeRaleigh, NCThe Lead Process Engineer will serve as the technical authority for process design and execution on EPC projects involving Active Pharmaceutical Ingredient (API) facilities, with a focus on small molecule drug substances. Process Design Leadership: Develop and review process flow diagrams (PFDs), piping and instrumentation diagrams (P&IDs), material and energy balances, and equipment specifications for API small molecule facilities.Wastewater Process Engineer - Mid Atlantic South Black & Veatch Holding CoWastewater Process Engineer - Mid Atlantic SouthCary, NCTypical office environment, typical construction environment, extreme weather conditions, high noise level, safety hazards (electric currents, working on scaffolding and high places, exposure to chemicals), atmospheric conditions (fumes, odors, dusts, mists, gases, poor ventilation). Use processes such as physical/chemical primary treatment, conventional activated sludge, biological nutrient removal, fixed-film processes, membrane bio-reactors (MBR), sidestream treatment, tertiary filtration, and disinfection.Process Engineer Prysmian GroupProcess EngineerClaremont, North CarolinaDescription: As a world leader in telecom cable systems, the Prysmian Group’s Claremont fiber manufacturing plant is seeking a highly motivated, self-starter, developing leader to join the engineering department to support the manufacturing of optical fiber. Provide data and explanations to other process engineers, lead operators, process technicians, and other departments in order to maintain process stability.Sr. Process Engineer Japanese Speaking Gray IncSr. Process Engineer Japanese SpeakingCharlotte, NCDeeply rooted in EAC services, Gray serves both domestic and international customers across our core markets: Food & Beverage, Manufacturing, Automotive, Distribution, Mission Critical, and Commercial. What we expect… (Essential Functions)• Technical Leadership: Act as the technical lead on projects, applying advanced engineering concepts to develop process systems for food and beverage applications.•Process Engineer- #26-10827 US Tech Solutions, Inc.Process Engineer- #26-10827Wilson, NC$71–$71.87 / hourServe as Process Engineering Expert to develop business based technology solutions and provide integrated equipment, utility, and facility engineering expertise with an operational focus to support execution of strategic and key CAPEX manufacturing projects, driving ‘right first time’ start up and execution. Provide integrated equipment, utility, and facility engineering expertise with an operational focus in support of technology transfer and manufacturing projects to support ‘right first time’ execution and start up.Process Engineer Salas O'Brien, Inc.Process EngineerRaleigh, NCPart timeOur specialized experience includes design for data centers, healthcare, science and technology, high-rise buildings, clean energy, education, and other building types as well as structural and building sciences, infrastructure asset management, advanced robotics, and more. The Process Engineer will provide technical support to Engineering Design, Construction Management, and CQV/Start-up teams on facility and process projects within regulated manufacturing environments, including pharmaceutical and life sciences facilities operating under cGMP requirements.Principal Process Principal Engineer Johnson & JohnsonPrincipal Process Principal EngineerWilson, North CarolinaAgile Decision Making, Business Savvy, Coaching, Corrective and Preventive Action (CAPA), Crisis Management, Critical Thinking, Disruptive Innovations, Emerging Technologies, Industrial Hygiene, Lean Supply Chain Management, Organizing, Process Control, Process Engineering, Product Costing, Program Management, Project Schedule, Science, Technology, Engineering, and Math (STEM) Application, Technical Research Responsible for providing advanced engineering design and start-up of GMP large molecule biologics manufacturing facilities, systems, and equipment; and providing engineering and technical/business support for new complex production technologies and processing equipment, production network analysis, and Synthes of technology and case analysis.Manufacturing Process Engineer Pregis LLCManufacturing Process EngineerConover, NCIf you are looking for a company that is thriving across various high growth industries and is innovative, customer focused, high integrity, believes in strong teamwork and collaboration, Pregis is the company for you. This role involves close technical collaboration with cross-functional teams, including new product development, operations, maintenance, quality assurance, engineering, and sales.Senior Process Engineer - Semiconductor Water and Wastewater Black & Veatch Holding CoSenior Process Engineer - Semiconductor Water and WastewaterCary, NCTypical office environment, typical construction environment, extreme weather conditions, high noise level, safety hazards (electric currents, working on scaffolding and high places, exposure to chemicals), atmospheric conditions (fumes, odors, dusts, mists, gases, poor ventilation.) Effective oral and written communications skills, drive for results, quality driven, priority setting, planning, delegation, directing others, conflict management, informing, dealing with ambiguity, and building effective teams.Senior Process Engineer - Mining Water and Wastewater Treatment Black & Veatch Holding CoSenior Process Engineer - Mining Water and Wastewater TreatmentCary, NCTypical office environment, typical construction environment, extreme weather conditions, high noise level, safety hazards (electric currents, working on scaffolding and high places, exposure to chemicals), atmospheric conditions (fumes, odors, dusts, mists, gases, poor ventilation.) Effective oral and Wwritten communications skills, drive for results, quality driven, priority setting, planning, delegation, directing others, conflict management, informing, dealing with ambiguity, and building effective teams.Sr. Process Engineer - Mining Water and Wastewater Treatment Black & Veatch Holding CoSr. Process Engineer - Mining Water and Wastewater TreatmentCary, NCTypical office environment, typical construction environment, extreme weather conditions, high noise level, safety hazards (electric currents, working on scaffolding and high places, exposure to chemicals), atmospheric conditions (fumes, odors, dusts, mists, gases, poor ventilation.) Effective oral and Wwritten communications skills, drive for results, quality driven, priority setting, planning, delegation, directing others, conflict management, informing, dealing with ambiguity, and building effective teams.Water Treatment Facility Design Engineer GFT Infrastructure IncWater Treatment Facility Design EngineerRaleigh, NC$90,000–$200,000 / yearDesign new treatment systems or upgrade existing systems, including pre-treatment, various filtration processes including granular media and membranes, chemical storage and feed, UV and other advanced treatment technologies, and pumping equipment. Demonstrated experience and knowledge in primary treatment, filtration processes, chemical storage and feed, advanced water treatment, disinfection, hydraulics, and solids processing and handling preferred.Downstream Process Engineer Actalent IncDownstream Process EngineerApex, NC$40–$55 / hourThis Process Engineer role focuses on translating complex drug substance process requirements into practical equipment functionality and automation solutions within large-scale pharmaceutical manufacturing operations. The environment involves integration of purification processes into automated manufacturing systems, including DeltaV-based control platforms, with a focus on ensuring that existing equipment and IFC'd systems meet process and operational requirements.Sr Wastewater Process Engineer 1 Black & Veatch Holding CoSr Wastewater Process Engineer 1Cary, NC$105,910–$194,117 / yearTypical office environment, typical construction environment, extreme weather conditions, high noise level, safety hazards (electric currents, working on scaffolding and high places, exposure to chemicals), atmospheric conditions (fumes, odors, dusts, mists, gases, poor ventilation). Use processes such as physical/chemical primary treatment, conventional activated sludge, biological nutrient removal, fixed-film processes, membrane bio-reactors (MBR), sidestream treatment, tertiary filtration, and disinfection.Process Engineer Actalent IncProcess EngineerApex, NC$40–$55 / hourThis Process Engineer role focuses on translating complex drug substance process requirements into practical equipment functionality and automation solutions within large-scale pharmaceutical manufacturing operations. The environment involves integration of purification processes into automated manufacturing systems, including DeltaV-based control platforms, with a focus on ensuring that existing equipment and IFC'd systems meet process and operational requirements.Global Process Engineer - Upstream/Downstream Grifols SAGlobal Process Engineer - Upstream/DownstreamClayton, NCFocuses on fostering a best in class environment for the development, manufacture and regulation of biological products through availability and analysis of data, process understanding and Critical Quality Attributes (CQAs), utilization of process capabilities (maximize yield and throughput within CQA), continuous quality verification and continuous improvement. Third Party Agency and Recruiter Notice: Agencies that present a candidate to Grifols must have an active, nonexpired, Grifols Agency Master Services Agreement with the Grifols Talent Acquisition Department.Engineer V Process Zachry Holdings, IncEngineer V ProcessCharlotte, NCThis role is ideal for an experienced process engineer who enjoys technical leadership, complex problem-solving, and mentoring engineers while delivering high-quality solutions for power, energy, and industrial projects. Because of the volume and continuity of work, team members in Charlotte benefit from both stability and variety-working on meaningful projects while continuing to develop new skills and advance their careers.12345678910Resume ResourcesFree Resume TemplatesFree Resume BuilderSimilar Job SearchesRemote Engineering JobsEntry Level Engineering Jobs
Process Engineer Charlotte Extraction Labs LLCProcess EngineerPineville, NCFull timeMust be comfortable balancing engineering analysis with hands-on work in a manufacturing environment and spending significant time on the production floor learning processes, gathering data, troubleshooting issues, and collaborating with operations teams. Production/Operations Process Engineer wanted to support process development, optimization, scale-up, and continuous improvement for an innovative and rapidly scaling manufacturer in Gaston County.
Engineer IMCS Group IncEngineerLiberty, NCReporting to Engineering Manager the person in this role will support the PE-BME Battery Cell Department's mission to deliver engineering solutions for rapid competitiveness improvements through safety first, people development, and customer focus. Utilizing and improving systems & procedures for efficient and effective issue identification, root cause analysis, issue resolution, and reoccurrence prevention / kaizen to subsequent activity and projects.
Automation Engineer I/II, Sr. Automation Engineer I / II, Principal Automation Engineer Grifols SAAutomation Engineer I/II, Sr. Automation Engineer I / II, Principal Automation EngineerClayton, NCLevel II, Sr Level I (Proficient Level) Sr Level II, Principal (Expert Level): GxP Understanding - Compliance, Change Control, Quality Oversight, Validation; Utilities - WFI, CSG, Steam, HVAC, Chillers, Air, Chemical Tank Farm, Water, WWTP, Alcohol/Ethanol; Manufacturing - Fractionation, Purification, CIP, UF, Process, Chromatography; Sterile Filling - Filling, Autoclave, Sterilization Tunnels, Freeze Drying, Pasteurizer, Glass Washer; Packaging - Serialization, Packaging Equipment, Optics; Continual Improvement - Optimize and implement process improvements; Operational support - Provide support for process issues; and, Troubleshooting issues with operational areas and systems. Maintains accountability; Oversee employee career path, training plan, performance evaluation, and development opportunities; Oversee employee career path, training plan, performance evaluation, and development opportunities; Coaches, counsels, manages and directs personnel in appropriate assignments relative to priorities, sense of urgency and utilization of skill sets.
Water Treatment Process Engineer GFT Infrastructure IncWater Treatment Process EngineerRaleigh, NC$80,000–$180,000 / yearIn this capacity, the successful candidate will be responsible for the following: System Design:Lead and support the planning and process evaluation of potable water treatment processes, including intakes and raw water pump stations, coagulation, flocculation, sedimentation, disinfection, filtration, iron and manganese removal, PFAS treatment, chemical systems, and process wastewater and residuals handling. Experience in the planning and execution of projects: including project approach and resource needs, options analysis, process and equipment design, and engineering document development through the project delivery phases of plan, design, procure, construct, and commissioning.
Wastewater Treatment Process Engineer GFT Infrastructure IncWastewater Treatment Process EngineerRaleigh, NC$80,000–$180,000 / yearUse processes such as physical/chemical primary treatment, conventional activated sludge, biological nutrient removal, fixed-film processes, membrane bio-reactors (MBR), sidestream treatment, tertiary filtration, auxiliary wet-weather treatment, and disinfection. In this capacity, the successful candidate will be responsible for the following: System Design:Lead and support the planning and process evaluation of wastewater processes, including biological nutrient removal, sludge handling, and filtration processes.
Advanced Manufacturing Engineer - Capital Projects & Process Improvement Altec Industries, Inc.Advanced Manufacturing Engineer - Capital Projects & Process ImprovementCreedmoor, NCp>This experienced (4+ years) Manufacturing Engineer will support Altec Creedmoor Divisions Plant 24C, which specializes in the manufacture of composite (fiberglass) and steel components for utility truck mounted aerial device assemblies manufactured on site in downstream plants. Altec specializes in the manufacture, sale and service of aerial devices, digger derricks, cranes and specialty equipment for the electric utility, telecommunications, tree care, construction, and light and sign maintenance industries in more than 120 countries.
Immediate Job Opportunity for Process Engineer III The Fountain Group LLCImmediate Job Opportunity for Process Engineer IIIWilson, NCServe as Process Engineering Expert to develop business based technology solutions and provide integrated equipment, utility, and facility engineering expertise with an operational focus to support execution of strategic and key CAPEX manufacturing projects, driving ‘right first time’ start up and execution. Provide integrated equipment, utility, and facility engineering expertise with an operational focus in support of technology transfer and manufacturing projects to support ‘right first time’ execution and start up.
Process Engineer - 3 Integrated Resources, IncProcess Engineer - 3Wilson, NCServe as Process Engineering Expert to develop business based technology solutions and provide integrated equipment, utility, and facility engineering expertise with an operational focus to support execution of strategic and key CAPEX manufacturing projects, driving ‘right first time’ start up and execution. Provide integrated equipment, utility, and facility engineering expertise with an operational focus in support of technology transfer and manufacturing projects to support ‘right first time’ execution and start up.
Engineer 4 - Process Net2SourceEngineer 4 - ProcessWilson, NC$72–$72.40 / hourServe as Process Engineering Expert to develop business based technology solutions and provide integrated equipment, utility, and facility engineering expertise with an operational focus to support execution of strategic and key CAPEX manufacturing projects, driving 'right first time' start up and execution. Provide integrated equipment, utility, and facility engineering expertise with an operational focus in support of technology transfer and manufacturing projects to support 'right first time' execution and start up.
NewProcess Engineer Graham Personnel ServicesProcess EngineerKernersville, NCThis position focuses on identifying production losses, conducting time studies, analyzing manufacturing data, improving throughput, increasing efficiency, and driving sustainable process improvements. QualificationsBachelor's degree in Industrial Engineering, Mechanical Engineering, Manufacturing Engineering, Chemical Engineering, or a related engineering discipline.
KBI: US - Process Engineer III KBI Biopharma IncKBI: US - Process Engineer IIIDurham, NCAct the technical subject matter expert (SME) for upstream and/or downstream equipment and the site clean utilities ensuring proper installation, qualification, and maintenance of these systems. As a Process Engineer, you will act as member of a cross-functional team to support implementation of new systems and improvements to existing manufacturing processes and equipment.
Advanced Process Engineer Celanese International CorporationAdvanced Process EngineerWilmington, North CarolinaThe role provides technical expertise and knowledge to the manufacturing process, including raw materials, equipment, and processes, and implements new technologies, processes, and raw materials. Assist the Technology Leader with site product quality, including run plans, finished product quality performance, and quality RCAs.
Industrial Wastewater Staff Process Mechanical Engineer Arcadis NVIndustrial Wastewater Staff Process Mechanical EngineerRaleigh, NC$70,800–$123,600 / yearIn this role, you will have the opportunity to: • Function as the process engineer on industrial water/wastewater projects • Apply processes and technologies for physical/chemical primary treatment, biological treatment, membrane treatment, adsorption filtration, disinfection, thermal evaporation, and crystallization • Receive technical mentoring and guidance from a senior process engineer • Delegate engineering or scientific calculations, drawings to junior staff • Collaborate with multi-disciplinary design teams to implement complex treatment solutions • Support implementation of projects from study phase through design, construction, startup, and commissioning, and operation and maintenance of treatment systems. Arcadis Industrial Water Treatment and Optimization (IWTO) team is seeking a mid-level Industrial Water Process Engineer with 5 years of consulting engineering experience to contribute to our expanding portfolio of industrial water and wastewater related design projects.
Associate Process Engineer, (JP13534) 3 Key ConsultingAssociate Process Engineer, (JP13534)Holly Springs, North CarolinaWorking closely with multiple subject areas, including manufacturing, process engineering, process development, utility operations, maintenance, quality assurance, and validation to implement operational improvements. • Lead the development of calibration/maintenance programs, ensure the availability of spare parts, and coordinate maintenance execution as necessary to ensure systems are in proper working order.
Engineer HireTalentEngineerLiberty, NCReporting to Engineering Manager the person in this role will support the PE-BME Battery Cell Department's mission to deliver engineering solutions for rapid competitiveness improvements through safety first, people development, and customer focus. Utilizing and improving systems & procedures for efficient and effective issue identification, root cause analysis, issue resolution, and reoccurrence prevention / kaizen to subsequent activity and projects.
NewProcess Engineer Intellectt INCProcess EngineerWilm, NCThe selected candidates will serve as Process System Owners (SMEs) responsible for the design, implementation, commissioning, startup, and operational support of critical GMP manufacturing systems. Duration: 12-Month ContractPosition Summary: Seeking experienced Process Engineers to support a large-scale greenfield biologics manufacturing facility in the Raleigh-Durham area.
Description Process Engineer Salas O'Brien Engineers IncDescription Process EngineerRaleigh, NCOur specialized experience includes design for data centers, healthcare, science and technology, high-rise buildings, clean energy, education, and other building types as well as structural and building sciences, infrastructure asset management, advanced robotics, and more. The Process Engineer will provide technical support to Engineering Design, Construction Management, and CQV/Start-up teams on facility and process projects within regulated manufacturing environments, including pharmaceutical and life sciences facilities operating under cGMP requirements.
Associate Process Engineer - Biopharma (JP13416) 3 Key ConsultingAssociate Process Engineer - Biopharma (JP13416)Holly Springs, North CarolinaWorking closely with multiple subject areas, including manufacturing, process engineering, process development, utility operations, maintenance, quality assurance, and validation to implement operational improvements. Lead the development of calibration/maintenance programs, ensure the availability of spare parts, and coordinate maintenance execution as necessary to ensure systems are in proper working order.
NewSenior Water/Wastewater Process Engineer #3572374 Axiom PathSenior Water/Wastewater Process Engineer #3572374Charlotte, North CarolinaJoin a leading, multi-disciplinary design and engineering organization known for delivering impactful infrastructure and community-focused projects across the Southeast. Teams are highly collaborative and mission-driven, working on projects that directly improve public health, environmental resilience, and quality of life.
Lead Process Engineer - API Small Molecule Exyte GmbHLead Process Engineer - API Small MoleculeRaleigh, NCThe Lead Process Engineer will serve as the technical authority for process design and execution on EPC projects involving Active Pharmaceutical Ingredient (API) facilities, with a focus on small molecule drug substances. Process Design Leadership: Develop and review process flow diagrams (PFDs), piping and instrumentation diagrams (P&IDs), material and energy balances, and equipment specifications for API small molecule facilities.
Wastewater Process Engineer - Mid Atlantic South Black & Veatch Holding CoWastewater Process Engineer - Mid Atlantic SouthCary, NCTypical office environment, typical construction environment, extreme weather conditions, high noise level, safety hazards (electric currents, working on scaffolding and high places, exposure to chemicals), atmospheric conditions (fumes, odors, dusts, mists, gases, poor ventilation). Use processes such as physical/chemical primary treatment, conventional activated sludge, biological nutrient removal, fixed-film processes, membrane bio-reactors (MBR), sidestream treatment, tertiary filtration, and disinfection.
Process Engineer Prysmian GroupProcess EngineerClaremont, North CarolinaDescription: As a world leader in telecom cable systems, the Prysmian Group’s Claremont fiber manufacturing plant is seeking a highly motivated, self-starter, developing leader to join the engineering department to support the manufacturing of optical fiber. Provide data and explanations to other process engineers, lead operators, process technicians, and other departments in order to maintain process stability.
Sr. Process Engineer Japanese Speaking Gray IncSr. Process Engineer Japanese SpeakingCharlotte, NCDeeply rooted in EAC services, Gray serves both domestic and international customers across our core markets: Food & Beverage, Manufacturing, Automotive, Distribution, Mission Critical, and Commercial. What we expect… (Essential Functions)• Technical Leadership: Act as the technical lead on projects, applying advanced engineering concepts to develop process systems for food and beverage applications.•
Process Engineer- #26-10827 US Tech Solutions, Inc.Process Engineer- #26-10827Wilson, NC$71–$71.87 / hourServe as Process Engineering Expert to develop business based technology solutions and provide integrated equipment, utility, and facility engineering expertise with an operational focus to support execution of strategic and key CAPEX manufacturing projects, driving ‘right first time’ start up and execution. Provide integrated equipment, utility, and facility engineering expertise with an operational focus in support of technology transfer and manufacturing projects to support ‘right first time’ execution and start up.
Process Engineer Salas O'Brien, Inc.Process EngineerRaleigh, NCPart timeOur specialized experience includes design for data centers, healthcare, science and technology, high-rise buildings, clean energy, education, and other building types as well as structural and building sciences, infrastructure asset management, advanced robotics, and more. The Process Engineer will provide technical support to Engineering Design, Construction Management, and CQV/Start-up teams on facility and process projects within regulated manufacturing environments, including pharmaceutical and life sciences facilities operating under cGMP requirements.
Principal Process Principal Engineer Johnson & JohnsonPrincipal Process Principal EngineerWilson, North CarolinaAgile Decision Making, Business Savvy, Coaching, Corrective and Preventive Action (CAPA), Crisis Management, Critical Thinking, Disruptive Innovations, Emerging Technologies, Industrial Hygiene, Lean Supply Chain Management, Organizing, Process Control, Process Engineering, Product Costing, Program Management, Project Schedule, Science, Technology, Engineering, and Math (STEM) Application, Technical Research Responsible for providing advanced engineering design and start-up of GMP large molecule biologics manufacturing facilities, systems, and equipment; and providing engineering and technical/business support for new complex production technologies and processing equipment, production network analysis, and Synthes of technology and case analysis.
Manufacturing Process Engineer Pregis LLCManufacturing Process EngineerConover, NCIf you are looking for a company that is thriving across various high growth industries and is innovative, customer focused, high integrity, believes in strong teamwork and collaboration, Pregis is the company for you. This role involves close technical collaboration with cross-functional teams, including new product development, operations, maintenance, quality assurance, engineering, and sales.
Senior Process Engineer - Semiconductor Water and Wastewater Black & Veatch Holding CoSenior Process Engineer - Semiconductor Water and WastewaterCary, NCTypical office environment, typical construction environment, extreme weather conditions, high noise level, safety hazards (electric currents, working on scaffolding and high places, exposure to chemicals), atmospheric conditions (fumes, odors, dusts, mists, gases, poor ventilation.) Effective oral and written communications skills, drive for results, quality driven, priority setting, planning, delegation, directing others, conflict management, informing, dealing with ambiguity, and building effective teams.
Senior Process Engineer - Mining Water and Wastewater Treatment Black & Veatch Holding CoSenior Process Engineer - Mining Water and Wastewater TreatmentCary, NCTypical office environment, typical construction environment, extreme weather conditions, high noise level, safety hazards (electric currents, working on scaffolding and high places, exposure to chemicals), atmospheric conditions (fumes, odors, dusts, mists, gases, poor ventilation.) Effective oral and Wwritten communications skills, drive for results, quality driven, priority setting, planning, delegation, directing others, conflict management, informing, dealing with ambiguity, and building effective teams.
Sr. Process Engineer - Mining Water and Wastewater Treatment Black & Veatch Holding CoSr. Process Engineer - Mining Water and Wastewater TreatmentCary, NCTypical office environment, typical construction environment, extreme weather conditions, high noise level, safety hazards (electric currents, working on scaffolding and high places, exposure to chemicals), atmospheric conditions (fumes, odors, dusts, mists, gases, poor ventilation.) Effective oral and Wwritten communications skills, drive for results, quality driven, priority setting, planning, delegation, directing others, conflict management, informing, dealing with ambiguity, and building effective teams.
Water Treatment Facility Design Engineer GFT Infrastructure IncWater Treatment Facility Design EngineerRaleigh, NC$90,000–$200,000 / yearDesign new treatment systems or upgrade existing systems, including pre-treatment, various filtration processes including granular media and membranes, chemical storage and feed, UV and other advanced treatment technologies, and pumping equipment. Demonstrated experience and knowledge in primary treatment, filtration processes, chemical storage and feed, advanced water treatment, disinfection, hydraulics, and solids processing and handling preferred.
Downstream Process Engineer Actalent IncDownstream Process EngineerApex, NC$40–$55 / hourThis Process Engineer role focuses on translating complex drug substance process requirements into practical equipment functionality and automation solutions within large-scale pharmaceutical manufacturing operations. The environment involves integration of purification processes into automated manufacturing systems, including DeltaV-based control platforms, with a focus on ensuring that existing equipment and IFC'd systems meet process and operational requirements.
Sr Wastewater Process Engineer 1 Black & Veatch Holding CoSr Wastewater Process Engineer 1Cary, NC$105,910–$194,117 / yearTypical office environment, typical construction environment, extreme weather conditions, high noise level, safety hazards (electric currents, working on scaffolding and high places, exposure to chemicals), atmospheric conditions (fumes, odors, dusts, mists, gases, poor ventilation). Use processes such as physical/chemical primary treatment, conventional activated sludge, biological nutrient removal, fixed-film processes, membrane bio-reactors (MBR), sidestream treatment, tertiary filtration, and disinfection.
Process Engineer Actalent IncProcess EngineerApex, NC$40–$55 / hourThis Process Engineer role focuses on translating complex drug substance process requirements into practical equipment functionality and automation solutions within large-scale pharmaceutical manufacturing operations. The environment involves integration of purification processes into automated manufacturing systems, including DeltaV-based control platforms, with a focus on ensuring that existing equipment and IFC'd systems meet process and operational requirements.
Global Process Engineer - Upstream/Downstream Grifols SAGlobal Process Engineer - Upstream/DownstreamClayton, NCFocuses on fostering a best in class environment for the development, manufacture and regulation of biological products through availability and analysis of data, process understanding and Critical Quality Attributes (CQAs), utilization of process capabilities (maximize yield and throughput within CQA), continuous quality verification and continuous improvement. Third Party Agency and Recruiter Notice: Agencies that present a candidate to Grifols must have an active, nonexpired, Grifols Agency Master Services Agreement with the Grifols Talent Acquisition Department.
Engineer V Process Zachry Holdings, IncEngineer V ProcessCharlotte, NCThis role is ideal for an experienced process engineer who enjoys technical leadership, complex problem-solving, and mentoring engineers while delivering high-quality solutions for power, energy, and industrial projects. Because of the volume and continuity of work, team members in Charlotte benefit from both stability and variety-working on meaningful projects while continuing to develop new skills and advance their careers.