Controls Technician JobotControls TechnicianJefferson City, TN$30–$45 / hourInformation collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. Knowledge of robotic programming, 24VDC systems, and ability to make minor control modifications (timers, counters, constants) preferred.
BAS/HVAC Controls Technician JobotBAS/HVAC Controls Techniciannashville, TN$75,000–$95,000 / yearInformation collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. We are a regional technical services firm that specializes in implementing integrated building control platforms that manage systems such as HVAC, lighting, access, and other facility infrastructure.
NewCommercial Service Controls Technician Trane TechnologiesCommercial Service Controls TechnicianWoodbine, TN$28.96–$39.02 / houror less Must be able to maneuver confined access areas, as small as 30” vertical x 45” horizontal Must be able to comfortably and routinely access rooftops with extension and/or fixed ladders at heights of 15’ to 20’, and occasionally, up to 50 feet This role may be exposed to variable weather conditions, moving mechanical parts, heights, risk of electrical shock, noisy operating equipment and other variable environmental conditions based on location Annual Base Salary Range or Hourly Base Pay Range: $28.96 - $39.02 Compensation Type: Hourly Incentive Eligible: No Sales Commisison Eligible: No Disclaimer: We strive to provide competitive compensation for this position, tailored to a variety of factors. EPA preferred Additional Requirements and Environmental Exposure: Must be able to safely and legally operate a vehicle using a seat belt Must be able to wear helmets, safety goggles, fall protection harness and safety boots to safely perform job duties Must be able to twist the trunk of your body 90 degrees in each direction Must be able to squat and touch the floor with both hands Must be able to reach your hands over your head Must be able to stand on concrete surfaces for extended periods, routinely up to 4 hours This position is highly physical and requires regular use of hands, fingers, walking, stooping, kneeling and climbing ladders.
NewControls Systems Technician Johnson ControlsControls Systems TechnicianFranklin, TN$21.93–$32.89 / hourJob Description Johnson Controls, a global leader in thermal management, mission-critical building systems, energy efficiency, and decarbonization, helps customers use energy more productively, reduce carbon emissions, and operate with the precision and resilience required in rapidly expanding industries such as data centers, healthcare, pharmaceuticals, advanced manufacturing, and higher education. Backed by advanced technology, lifecycle services and an industry-leading field organization, we elevate customer performance, turn goals into real-world results and help move society forward.
NewPanel Builder / Control Panel Technician JobotPanel Builder / Control Panel TechnicianSmyrna, TN$22–$25 / hourThe role includes mounting components such as DIN rail, wire duct, terminal blocks, breakers, fuse holders, power supplies, relays, PLC hardware, HMIs, communication devices, transformers, disconnects, and other control components. Experience with water, wastewater, pump systems, process control, PLC hardware, HMIs, VFDs, relays, motor starters, Ethernet devices, communication equipment, panel testing, troubleshooting, field startup, or commissioning would be a plus.
Senior Controls Specialist JobotSenior Controls SpecialistMemphis, TN$35–$50 / hourInformation collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. This role is ideal for someone with strong BAS/DDC experience, who can program, commission, and service advanced building automation systems that integrate HVAC, lighting, security, and energy management.
Controls Engineer JobotControls EngineerMaryville, TN$100,000–$150,000 / yearInformation collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. Coordinates high power installations with electrical contractors, including specification and communication of power distribution requirements including mains 3-phase circuit ampacities and branch circuit details.
Sr Controls Engineer JobotSr Controls EngineerKnoxville, TN$125,000–$155,000 / yearInformation collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. Qualifications: BS in electrical engineering, Electrical Technology or Mechatronics, AS degree in a related engineering field and combination of relevant experience can be considered.
NewPest Control Technician Ecolab Inc.Pest Control TechnicianNashville, TNBuilding on a century of innovation, our 48,000 associates help deliver comprehensive science-based solutions, data-driven insights and world-class service to advance food safety, maintain clean and safe environments, and optimize water and energy use, and improve operational efficiencies and sustainability for customers in the food, healthcare, life sciences, hospitality and industrial markets in more than 170 countries around the world. To meet customer requirements and comply with local or state regulations, applicants for certain customer-facing roles may need to: - Undergo additional background screens and/or drug/alcohol testing for customer credentialing.
63283 Chrysler Certified Master Automotive Technician Stinnett Chrysler Dodge Jeep RAM63283 Chrysler Certified Master Automotive TechnicianNewport, TNFull timeConfer with customers or service advisors to obtain descriptions of vehicle problems, and to discuss work to be performed and future repair requirements. Diagnose, maintain, and repair vehicle automotive systems including engine, transmission, electrical, steering, suspension, braking, air conditioning, etc.
26808 Chrysler Certified Automotive Technician Franklin Chrysler Dodge Jeep Ram26808 Chrysler Certified Automotive TechnicianFranklin, TNFull timeConfer with customers or service advisors to obtain descriptions of vehicle problems, and to discuss work to be performed and future repair requirements. Diagnose, maintain, and repair vehicle automotive systems including engine, transmission, electrical, steering, suspension, braking, air conditioning, etc.
Electro-Mechanical Technicians - Multiple Roles JobotElectro-Mechanical Technicians - Multiple RolesVonore, TN$30–$40 / hourInformation collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. Performing preventive maintenance on a wide range of electro-mechanical systems, including PLC, CNC, automation, robotics, and 24V three phase control wiring systems.
NewHVAC Installation & Startup Technician UpchurchHVAC Installation & Startup TechnicianMemphis, TNThis role requires expertise in mechanical installation practices, basic electrical knowledge, and the ability to perform system start-up and initial operational checks to ensure systems meet design intent and manufacturer specifications. We offer end-to-end solutions—from design and installation to ongoing maintenance and emergency support— helping clients maximize building performance, energy efficiency, and equipment lifespan .
SITE QUALITY TECHNICIAN - OP MobilitySITE QUALITY TECHNICIAN -Spring Hill, TNA world leader in onboard energy storage and emission reduction systems, OPmobility C-Power develops solutions for all types of powertrains including, gasoline, diesel, hybrids, plug-in hybrids and battery electric vehicles. Innovation-driven since its creation, the Group develops and produces intelligent exterior systems, customized complex modules, lighting systems, clean energy systems and electrification solutions for all mobility companies.
Electrical and Instrumentation Technician KellanovaElectrical and Instrumentation TechnicianJackson, TNAnalyzing Conditions and Providing Solutions - Identify and examine production equipment failures to understand root cause analysis, with the help of interpreting schematics and drawings. Collaborate and Engage – Work with various departments across your assigned location at the site, including operations and support resources to deliver results meet business needs.
Commercial HVAC Installation Technician Lee CompanyCommercial HVAC Installation TechnicianGainesboro, TNPrimarily responsible for performing installs, repairs and maintenance to a variety of equipment including: refrigeration, air conditioning, electric motors, heating units, heat pumps, hermetic compressors, light commercial furnaces, boilers, burners, intake and exhaust fans, economizers, humidifiers, capacity controls, semi-hermetic compressors, split systems, flame safeguard controls, air compressors, air driers, and packaged units. Lee Company offers complete facility solutions services of HVAC, plumbing, electrical, and preventative maintenance for commercial facilities throughout Tennessee, Alabama, and Kentucky.
Air Conditioning Technician Lee CompanyAir Conditioning TechnicianBaxter, TNPrimarily responsible for performing installs, repairs and maintenance to a variety of equipment including: refrigeration, air conditioning, electric motors, heating units, heat pumps, hermetic compressors, light commercial furnaces, boilers, burners, intake and exhaust fans, economizers, humidifiers, capacity controls, semi-hermetic compressors, split systems, flame safeguard controls, air compressors, air driers, and packaged units. Lee Company offers complete facility solutions services of HVAC, plumbing, electrical, and preventative maintenance for commercial facilities throughout Tennessee, Alabama, and Kentucky.
Multi Craft Maintenance Technician A.O. SmithMulti Craft Maintenance TechnicianFranklin, TNRespond to production work orders regarding troubleshoot, repair and maintain a wide variety of manufacturing & facility equipment which includes fabrication, mechanical, pneumatic, hydraulic, electrical, PLC and robotic processes. The Multi-Craft Maintenance Technician Shift D will perform preventative, predictive, corrective, and emergency maintenance on industrial equipment with a strong emphasis on, but not limited to electrical controls and systems.
Automation Technician JobotAutomation TechnicianClinton, TN$35–$45 / hourInformation collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. Perform preliminary equipment inspections, run conduit and terminate wiring, install pneumatic lines, perform Point-to-Point wiring verifications.
NewMaintenance Technician A.O. SmithMaintenance TechnicianFranklin, TNRespond to production work orders regarding troubleshoot, repair and maintain a wide variety of manufacturing & facility equipment which includes fabrication, mechanical, pneumatic, hydraulic, electrical, PLC and robotic processes. The Multi-Craft Maintenance Technician Shift C will perform preventative, predictive, corrective, and emergency maintenance on industrial equipment with a strong emphasis on, but not limited to electrical controls and systems.
Industrial Maintenance Technician A.O. SmithIndustrial Maintenance TechnicianFranklin, TN$28.79Respond to production work orders regarding troubleshoot, repair and maintain a wide variety of manufacturing & facility equipment which includes fabrication, mechanical, pneumatic, hydraulic, electrical, PLC and robotic processes. The Multi-Craft Maintenance Technician Shift F (Overnight Shift) will perform preventative, predictive, corrective, and emergency maintenance on industrial equipment with a strong emphasis on, but not limited to electrical controls and systems.
MultiCraft Maintenance Technician A.O. SmithMultiCraft Maintenance TechnicianAshland City, TNThe company is one of the world’s leading manufacturers of residential and commercial water heating equipment and boilers, as well as a manufacturer of water treatment products for residential and light commercial applications. Troubleshoot and repair electrical/electronic, hydraulics, pneumatics, mechanical and building components on industrial equipment plant wide and have basic knowledge of PLC’s and controls.
Industrial HVAC Technician Lee CompanyIndustrial HVAC TechnicianLa Grange, TNOur HVAC Technicians install, repair, and maintain a variety of equipment for industrial and commercial customers including, refrigeration, air conditioning, electric motors, heating units, heat pumps, hermetic compressors, light commercial furnaces, boilers, burners, intake and exhaust fans, economizers, humidifiers, capacity controls, semi-hermetic compressors, split systems, flame safeguard controls, air compressors, air driers, chillers, and packaged units. Physical: Comprehensive health, dental, and vision insurance, plus free virtual primary care, mental health, and urgent care services for employees and their family members.
NewWiring Technician - Mount Juliet VoltWiring Technician - Mount JulietMount Juliet, TN$20–$22 / hourBy applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from VOLT and its affiliates, and contracted partners. Pay range offered to a successful candidate will be based on several factors, including the candidate's education, work experience, work location, specific job duties, certifications, etc.
NewAmmonia Technician - 1st Shift Reser's Fine Foods, Inc.Ammonia Technician - 1st ShiftMemphis, TNJob Summary: Under moderate supervision a Refrigeration Technician 3 is responsible for maintaining, repairing, and examining refrigeration systems, working specifically with ammonia refrigeration. Perform daily chemical testing and logging all test results, making adjustments required to maintain refrigeration & utility system within established limits.
NewCommercial HVAC Installation Technician Trane TechnologiesCommercial HVAC Installation TechnicianWoodbine, TN$28.96–$39.02 / hourAdditional Requirements and Environmental Exposure: Must be able to safely and legally operate a vehicle using a seat belt Must be able to wear helmets, safety goggles, fall protection harness and safety boots to safely perform job duties Must be able to twist the trunk of your body 90 degrees in each direction Must be able to squat and touch the floor with both hands Must be able to reach your hands over your head Must be able to stand on concrete surfaces for extended periods, routinely up to 4 hours This position is highly physical and requires regular use of hands, fingers, walking, stooping, kneeling and climbing ladders. Must be able to maneuver access areas, as small as 30” vertical x 45” horizontal Must be able to comfortably and routinely access rooftops with extension and/or fixed ladders at heights of 15’ to 20’, and occasionally, up to 50 feet This role may be exposed to variable weather conditions, moving mechanical parts, heights, risk of electrical shock, noisy operating equipment and other variable environmental conditions based on location Annual Base Salary Range or Hourly Base Pay Range: $28.96 - $39.02 Compensation Type: Hourly Incentive Eligible: No Sales Commission Eligible: No Disclaimer: We strive to provide competitive compensation for this position, tailored to a variety of factors.
Refrigeration Start-up Technician - Commercial & Industrial CoolSysRefrigeration Start-up Technician - Commercial & IndustrialKnoxville, TN$60The ideal candidate should know advanced solid-state controls; oil systems safety controls; mechanical sub-cooling; introduction to head pressure controls for energy reduction; introduction to energy management systems (EMS); refrigeration rack oil systems; advanced de-frost diagnosis; and single and parallel compressor system start-up in a supermarket environment. Journeyman-HVAC, Journeyman-EMS, EMS, Installer, Install, Installation, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, mechanical, mechanic, AC, field service, chiller, specialist, HVACR, Electrical, start-up, startup.
NewTool and Die Technician Nokian TyresTool and Die TechnicianDayton, TNEmployees are required to wear appropriate personal protective equipment (PPE) in designated production areas, which may include safety-toe shoes, safety glasses with side shields, hearing protection, cut-resistant gloves, and other PPE as defined by risk assessments and site policies. Ability to visually inspect equipment, materials, gauges, and finished products to identify defects, malfunctions, hazards, or deviations, and to recognize safety signals, alarms, and changing conditions in the work environment, with or without reasonable accommodation.
NewHVAC Service Technician Precision AirHVAC Service TechnicianMurfreesboro, TN$20–$35 / hourThe HVAC Senior Service Technician plays a crucial role in ensuring the optimal performance and reliability of heating, ventilation, and air conditioning systems at Precision Air. Preferred skills, such as experience with energy management systems, will enhance the technician's ability to provide innovative solutions that improve system efficiency and reduce energy costs.
Dialysis Equipment Technician Dialysis Clinic, Inc.Dialysis Equipment TechnicianLebanon, TN$19–$21 / hourSince opening the first clinic 50 years ago in Nashville, Tenn., our Dialysis Clinic, Inc. family has grown to be the nation’s largest nonprofit dialysis provider with more than 270 locations in 30 states, serving nearly 14,000 patients each day. The Dialysis Equipment Technician ensures the dialysis equipment, systems, supplies and facility are functioning properly and safely to ensure patients receive the safest care with the highest-quality outcomes.
NewHVAC Technician Trane TechnologiesHVAC TechnicianHarrison, TN$26.64–$35.90 / hourEPA Certification Additional Requirements and Environmental Exposure: Must be able to safely and legally operate a vehicle using a seat belt Must be able to wear helmets, safety goggles, fall protection harness and safety boots to safely perform job duties Must be able to twist the trunk of your body 90 degrees in each direction Must be able to squat and touch the floor with both hands Must be able to reach your hands over your head Must be able to stand on concrete surfaces for extended periods, routinely up to 4 hours This position is highly physical and requires regular use of hands, fingers, walking, stooping, kneeling and climbing ladders. or less Must be able to maneuver confined access areas, as small as 30” vertical x 45” horizontal Must be able to comfortably and routinely access rooftops with extension and/or fixed ladders at heights of 15’ to 20’, and occasionally, up to 50 feet This role may be exposed to variable weather conditions, moving mechanical parts, heights, risk of electrical shock, noisy operating equipment and other variable environmental conditions based on location We offer competitive compensation and comprehensive benefits and programs.
NewJourneyman HVAC Service Technician Trane TechnologiesJourneyman HVAC Service TechnicianCloverdale, TN$26.64–$35.90 / hourEPA Certification Additional Requirements and Environmental Exposure: Must be able to safely and legally operate a vehicle using a seat belt Must be able to wear helmets, safety goggles, fall protection harness and safety boots to safely perform job duties Must be able to twist the trunk of your body 90 degrees in each direction Must be able to squat and touch the floor with both hands Must be able to reach your hands over your head Must be able to stand on concrete surfaces for extended periods, routinely up to 4 hours This position is highly physical and requires regular use of hands, fingers, walking, stooping, kneeling and climbing ladders. or less Must be able to maneuver confined access areas, as small as 30” vertical x 45” horizontal Must be able to comfortably and routinely access rooftops with extension and/or fixed ladders at heights of 15’ to 20’, and occasionally, up to 50 feet This role may be exposed to variable weather conditions, moving mechanical parts, heights, risk of electrical shock, noisy operating equipment and other variable environmental conditions based on location Annual Base Salary Range or Hourly Base Pay Range: $26.64 - $35.90 Compensation Type: Hourly Incentive Eligible: No Sales Commission Eligible: No Disclaimer: We strive to provide competitive compensation for this position, tailored to a variety of factors.
NewSecurity Service Technician Johnson ControlsSecurity Service TechnicianMemphis, TN$21–$30 / hourJob Description Johnson Controls, a global leader in thermal management, mission-critical building systems, energy efficiency, and decarbonization, helps customers use energy more productively, reduce carbon emissions, and operate with the precision and resilience required in rapidly expanding industries such as data centers, healthcare, pharmaceuticals, advanced manufacturing, and higher education. As a Commercial Service Technician you will locate and alleviate trouble with damaged equipment or wiring; readjust equipment, repair or replace inoperative equipment and test for operation; prepare trouble order forms to report temporary repairs.
NewHVAC Service Technician ACS Air Conditioning Specialist IncHVAC Service TechnicianSmyrna, TN$20–$32 / hourAbout the Role: The HVAC Senior Service Technician plays a crucial role in ensuring the optimal performance and reliability of heating, ventilation, and air conditioning systems. Valid Driver's license with clean 3-year record-MAX 2 incidents within 3 years Preferred Qualifications: Associate's degree in HVAC technology or a related field.
NewEmergency Medical Technician (EMT) - Memphis Vital Medical TransportEmergency Medical Technician (EMT) - MemphisMemphis, TN$18–$24.50 / hourEMT’s respond to emergency calls, perform medical services and transport patients to medical facilities and continue to give care as necessary during the transport of the patient to the hospital. **Employment is conditional upon and subject to completion of an Employment Application, the completion of a favorable background check, Motor Vehicle Report check, Drug Screen and approval thereof by the Company, in its sole discretion.
NewMaintenance Technician III Marriott International, IncMaintenance Technician IIINashville, TNTroubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TV's. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management.
NewHVAC Technician, Overnight Marriott International, IncHVAC Technician, OvernightNashville, TN$30Rooted in our expertise and leadership in meetings and experiences, Gaylord Hotels intentionally deliver environments, services and programming that bring people together in an extraordinary way. The heart of our brand are STARs, who are creative, entrepreneurial and dedicated to providing thoughtful, big-hearted service to guests.
NewFire Detection Systems Technician 3 Johnson ControlsFire Detection Systems Technician 3Nashville, TN$23.07–$31.73 / hourInstall, program, configure, commission and service Fire Alarm and Fire Suppression Systems including but not limited to; Simplex, Fike, Kidde, Inergen, Sapphire, FM-200, and CO2 as well as other related building system products at customer sites. Able to work in unusual and sometimes difficult positions such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc.
HVAC/R Service Technician - Light Commercial CoolSysHVAC/R Service Technician - Light CommercialMurfreesboro, TN$25–$40Provides service to the customer base by repairing and overhauling equipment, such as compressors, water pumps, air handlers, electrical and mechanical control devices in a safe, efficient and timely manner that exceeds the customer’s expectations. Provides repair work on refrigeration, heating and ventilation equipment, such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors and electric motors in a safe and timely manner.
NewFire Detection Systems Technician 4 Johnson ControlsFire Detection Systems Technician 4Nashville, TN$22.11–$34Johnson Controls, a global leader in thermal management, mission-critical building systems, energy efficiency, and decarbonization, helps customers use energy more productively, reduce carbon emissions, and operate with the precision and resilience required in rapidly expanding industries such as data centers, healthcare, pharmaceuticals, advanced manufacturing, and higher education. This skilled position involves installing, programming, troubleshooting, configuring, commissioning, and servicing Fire Alarm Systems, Access Control and CCTV Systems as well as other related building system products at customer sites.
NewAviation Electronics Technician U.S. NavyAviation Electronics TechnicianLake City, TNWork Environment Assignments with squadrons at naval air stations and aboard aircraft carriers worldwide; work in hangars, avionics labs, and outdoors on flight lines in all weather conditions and high noise environments; close teamwork with other aviation ratings and aircrew in a structured maintenance organization; potential temporary duty with detachments and deployments supporting carrier or expeditionary operations. Additional qualifications for this job may include: United States citizenship and eligibility for a security clearance; normal color perception; interest in aviation and working around aircraft; strong aptitude in electronics, computers, and precision technical work; manual dexterity, good memory, and physical fitness sufficient to work safely on flight lines, in hangars, and on shipboard aircraft.
Quality Technician Keller North America, Inc.Quality TechnicianNashville, TN$23–$32 / hourBy connecting global resources and local experience, Keller develops innovative, practical, and cost-effective solutions to geotechnical challenges. Experience: Previous experience in quality control, particularly in load testing and maintaining drill logs, is highly desirable.
Dialysis Patient Care Technician-PCT Dialysis Clinic, Inc.Dialysis Patient Care Technician-PCTJackson, TN$20–$26 / hourDCI’s Differentiator: Since opening the first clinic 50 years ago in Nashville, Tenn., our Dialysis Clinic, Inc. family has grown to be the nation’s largest nonprofit dialysis provider with more than 270 locations in 30 states, serving nearly 14,000 patients each day. The Patient Care Technician (PCT) provides care to patients with end-stage renal disease, supporting clinical staff throughout the dialysis treatment process to deliver prescribed treatments.
Dialysis Biomed Technician Dialysis Clinic, Inc.Dialysis Biomed TechnicianChattanooga, TNDCI’s Differentiator: Since opening the first clinic 50 years ago in Nashville, Tenn., our Dialysis Clinic, Inc. family has grown to be the nation’s largest nonprofit dialysis provider with more than 270 locations in 30 states, serving nearly 14,000 patients each day. Join DCI today to build relationships and gain fulfillment serving individuals in our comfortable clinical setting with a lower caregiver-to-patient ratio than other providers.
Refrigeration Service Technician - Commercial & Industrial CoolSysRefrigeration Service Technician - Commercial & IndustrialKnoxville, TN$30–$45Provides service to the customer base by repairing and overhauling equipment, such as compressors, water pumps, air handlers, and electrical and mechanical control devices in a safe, efficient, and timely manner that exceeds customers’ expectations. Provides general repair work on refrigeration, heating, and ventilation equipment, such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors, and electric motors in a safe and timely manner.
NewHVAC Apprentice Service Technician Trane TechnologiesHVAC Apprentice Service TechnicianLonsdale, TN$22.59–$30.67 / hourWhat's in it for you: As a HVAC Technician Apprentice, you will be primarily responsible for assisting seasoned Service Technicians in the installation and repair of environmental control systems, utilizing knowledge of refrigeration theory, control systems, pipe fitting, and structural layouts. Work with supervising field technician, project manager and customers to precisely understand requirements for all on-site installations such as: forecasting issues, gathering materials and synchronizing on-site work.
NewComputer Field Technician U.S. NavyComputer Field TechnicianTrenton, TNWhat to Expect Hands on technical work that blends classroom, computer based training, and intensive lab practice; frequent troubleshooting under time pressure to restore mission critical combat systems and communications; strict adherence to safety procedures, configuration control, technical documentation, and test routines; team based maintenance and watchstanding afloat and ashore, often on rotating shifts to support around the clock operations; progressive responsibility as you qualify on systems, earn Navy Enlisted Classifications, and advance in rate. Enlist under the Advanced Electronics and Computer Field program, with final placement into the Electronics Technician or Fire Controlman rating during initial training at Great Lakes, based on performance and Navy needs; maintain AECF eligibility throughout training in order to retain any accelerated advancement benefits; fleet conversion into ET or FC from another rating may be possible for qualified Sailors, subject to screening and community manning.
NewElectronics Technician U.S. NavyElectronics TechnicianUnion City, TNWhat to Expect Hands on technical work that blends classroom, computer based training, and intensive lab practice; frequent troubleshooting under time pressure to restore mission critical combat systems and communications; strict adherence to safety procedures, configuration control, technical documentation, and test routines; team based maintenance and watchstanding afloat and ashore, often on rotating shifts to support around the clock operations; progressive responsibility as you qualify on systems, earn Navy Enlisted Classifications, and advance in rate. Enlist under the Advanced Electronics and Computer Field program, with final placement into the Electronics Technician or Fire Controlman rating during initial training at Great Lakes, based on performance and Navy needs; maintain AECF eligibility throughout training in order to retain any accelerated advancement benefits; fleet conversion into ET or FC from another rating may be possible for qualified Sailors, subject to screening and community manning.
Entry Level Refrigeration Service Technician - Commercial & Industrial CoolSysEntry Level Refrigeration Service Technician - Commercial & IndustrialNashville, TN$18–$22Provides service to the customer base by repairing and overhauling equipment, such as compressors, water pumps, air handlers, and electrical and mechanical control devices in a safe, efficient, and timely manner that exceeds customers’ expectations. Provides general repair work on refrigeration, heating, and ventilation equipment, such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors, and electric motors in a safe and timely manner.
NewFire Suppression Service Technician Johnson ControlsFire Suppression Service TechnicianNashville, TN$20.67–$36.06 / hourPerform service and repairs on Portable Fire Extinguishers, Kitchen Hood Systems & Suppression Gas Systems in addition to other related building system products at customer sites. HIRING HOURLY RANGE: $20.67-36.06 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.)