Electrical Project Engineer DPR ConstructionElectrical Project EngineerAustin, TXProficient computer skills in Microsoft Office Suite, project management software (CMiC, Prolog or similar), scheduling software (Primavera or similar), and BIM software (AutoCAD, Revit, Navisworks or similar). DPR Construction is a forward-thinking, self-performing general contractor specializing in technically complex and sustainable projects for the advanced technology, life sciences, healthcare, higher education and commercial markets.
Sr. Geartrain Manufacturing Engineer, Optimus Tesla IncSr. Geartrain Manufacturing Engineer, OptimusAustin, TXEstablish equipment requirements for high volume gearbox manufacturing and develop high-volume manufacturing methods Drive machine tool equipment and tooling design developments with external suppliers and with internal entities for scalable high-volume (automotive level) production. We work with the cross-functional teams (Design, Quality, Production, Sustaining, and Supply Chain) throughout the entire lifecycle of a product (from initial design through prototype development and into full production) to develop volume manufacturable designs and processes that will produce gearboxes.
Advanced Packaging Process Engineer, Silicon Technology Starlink Space Exploration Technologies CorpAdvanced Packaging Process Engineer, Silicon Technology StarlinkTXRESPONSIBILITIES: • Own packaging assembly processes from concept to mass production, including equipment and material selection for wafer-level and chip-level systems • Develop new technologies and establish baselines for assembly and packaging, including wafer grinding, wafer dicing, lithography, lamination, plating, etching, SMT, flip chip, bonding, molding, underfill, dispense, sputter, lid attach, and solder ball attach, and next-generation panel-level packaging processes • Bring-up for new product introduction (NPI) and new technology introduction (NTI) for assembly packaging lines • Own packaging prototypes, product development, and release to production • Select equipment and material to meet quality, reliability, cost, yield, and production targets • Interface with equipment and material suppliers including continuous improvement plans, cost reduction, and productivity improvements • Cross-functional interface with silicon design, materials, thermal, systems, and production teams • Implement advanced packaging solutions into SpaceX next generation products on Earth, in orbit, and beyond. BASIC QUALIFICATIONS: • Bachelor's degree in electrical engineering, mechanical engineering, chemical engineering, materials science, physics, or other engineering discipline • 1+ years working with semiconductor packaging processing equipment, silicon, microelectronics, or packaging design (internship experience applicable).
Silicon Packaging Process Engineer, Silicon Technology Starlink Space Exploration Technologies CorpSilicon Packaging Process Engineer, Silicon Technology StarlinkTXRESPONSIBILITIES: • Own packaging assembly processes from concept to mass production, including equipment and material selection for wafer-level and chip-level systems • Develop new technologies and establish baselines for assembly and packaging, including wafer grinding, wafer dicing, lithography, lamination, plating, etching, SMT, flip chip, bonding, molding, underfill, dispense, sputter, lid attach, and solder ball attach, and next-generation panel-level packaging processes • Bring-up for new product introduction (NPI) and new technology introduction (NTI) for assembly packaging lines • Own packaging prototypes, product development, and release to production • Select equipment and material to meet quality, reliability, cost, yield, and production targets • Interface with equipment and material suppliers including continuous improvement plans, cost reduction, and productivity improvements • Cross-functional interface with silicon design, materials, thermal, systems, and production teams • Implement advanced packaging solutions into SpaceX next generation products on Earth, in orbit, and beyond. BASIC QUALIFICATIONS: • Bachelor's degree in electrical engineering, mechanical engineering, chemical engineering, materials science, physics, or other engineering discipline • 1+ years working with semiconductor packaging processing equipment, silicon, microelectronics, or packaging design (internship experience applicable).
R&D Engineer III Semiconductor Services Business USR&D Engineer IIIManor, TXPart timeWork Experience: This position generally requires 4 to 8 years of directly related engineering experience in a development engineering role or a combination of directly related process engineering and development activities. Uses knowledge in engineering, chemistry, and physics to develop new products, coatings, cleaning methodologies, and services for both internal and external customers.
Electrical Engineer - UUVs & Undersea Electronics Saronic Technologies IncElectrical Engineer - UUVs & Undersea ElectronicsAustin, TXThe Senior Electrical Engineer will work closely with mechanical, software, systems, autonomy, and test engineering teams to deliver reliable undersea platforms and payloads capable of operating in demanding subsea conditions. We are seeking a Senior Electrical Engineer to lead the design, development, integration, and testing of advanced electrical and electronic systems for unmanned underwater vehicles, undersea sensors, and subsea mission systems.
Supplier Development Engineer, Silicon Starlink Space Exploration Technologies CorpSupplier Development Engineer, Silicon StarlinkTXDevelop and execute robust qualification plans covering front-end, back-end, and test, including wafer-level reliability testing, package qualification, high temperature operating life testing, highly accelerated stress testing, thermal cycling, electromigration testing, and full silicon test coverage validation. Assess supplier manufacturing capabilities across front-end and back-end processes, including wafer fabrication capacity, process stability, equipment suitability, process windows, yield learning, and overall technical readiness for high-volume silicon production including wafer fabrication, dicing, bumping, assembly, and packaging.
Sr. Manufacturing Engineer, Material Flow Tesla IncSr. Manufacturing Engineer, Material FlowAustin, TXInvestigate and apply advanced technologies in our material handling equipment, including: • Automated storage and retrieval systems (ASRS) • Buffer systems • Conveyance systems • Mobile robotics (AGVs) • Autonomous Mobile Robots (AMRs) • Robotic material handling and lift systems. Design and implement automated material handling solutions to optimize material flow across Teslas manufacturing lines, covering raw material transport, move product in between shops, and final product delivery within Cell Manufacturing.
Robotics Manufacturing Engineer, Stator Molding, Optimus Tesla IncRobotics Manufacturing Engineer, Stator Molding, OptimusAustin, TXDevelop manufacturing methods for stator and segment molding, including the following processes: Injection molding, micro molding, low pressure molding, transfer molding, vision control, precision gaging, conveyance, robotic handling, preheating, and cooling. Tesla is seeking a highly motivated Robotics Manufacturing Engineer to develop and engineer new processes and high-volume automation equipment for stator and segment molding with the Optimus Stator team in Austin, TX.
RF Test Engineer II CesiumAstroRF Test Engineer IIAustin, TXPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. Collaborate with design and test engineering teams to develop test requirements, map requirements to reusable test architectures and procedures, implement test plans and procedures, and log and present results to key stakeholders.
Product Quality & Reliability Engineer IV (E4) Applied Materials IncProduct Quality & Reliability Engineer IV (E4)Austin, TX$116,000–$159,500 / yearIf you would like to contact us regarding accessibility of our website or need assistance completing the application process, please contact us via e-mail at Accommodations_Program@amat.com, or by calling our HR Direct Help Line at 877-612-7547, option 1, and following the prompts to speak to an HR Advisor. The salary offered to a selected candidate will be based on multiple factors including location, hire grade, job-related knowledge, skills, experience, and with consideration of internal equity of our current team members.
HVAC Facilities TL Thermal Engineer Samsung Electronics America IncHVAC Facilities TL Thermal EngineerAustin, TX$76,000–$145,000 / yearThe HVAC thermal team scope includes cooling systems (cooling towers, condenser water, chilled water), heating systems (steam/condensate, hot water), Fab air conditioning (outside air makeup units, dry cooling coils, water spray/scrubbing system), general air conditioning (AHUs, EHPs, CRAC units), and process cooling water (tool heat removal). The Engineer and their team will work to tackle our most complex problems, initiate improvement projects, review designs, and manage projects while overseeing day to day activities including Breakdown Maintenance and Preventive Maintenance for improving quality and reliability in support of a semiconductor wafer fab.
Managing Engineer American Water Resources AssociationManaging EngineerTX$121,600–$156,300 / yearMinimum Qualifications: Graduation with a Bachelor's degree from an accredited college or university with major coursework in Engineering or in a field related to the job, plus eight (8) years of experience in engineering, including six (6) years of experience which were acquired after licensing as a professional engineer and including four (4) years of experience before or after licensing which were in a supervisory capacity. Ability to oversee all aspects of transportation review that includes (but not limited to): all residential and commercial development applications, zoning review, PUD review, site plan review, subdivision review, preliminary plan review, Transportation Impact Analyses (TIAs), and Transportation Demand Management (TDM) plans.
Controls Engineer, Production Control, Optimus Factory Tesla IncControls Engineer, Production Control, Optimus FactoryAustin, TXJoin the Production Control Engineering team as a Controls Engineer supporting Optimus program work across factory automation - including automated storage and retrieval (ASRS), AMR installation and integration, conveyors, and production equipment that must run at volume with high uptime. You will design, program, install, commission, and continuously improve control systems for a world-class manufacturing facility at Giga Austin - under the same demand for speed, quality, and ownership that defines every Tesla product.
Sr. Solar Cell Reliability Engineer (Starlink) SpaceXSr. Solar Cell Reliability Engineer (Starlink)Bastrop, TXDefine, execute, and continuously improve the space reliability test matrix for HJT solar cells (e.g., thermal cycling, thermal vacuum, humidity/damp heat as applicable, UV/photo-stability, reverse bias / hotspot, mechanical shock/vibration at cell/coupon level, radiation exposure coordination, and accelerated life tests). Solar Cell Reliability Engineer who will own the reliability lab and the end-to-end reliability story for our solar cells in space —from wafer and cell process through module integration, environmental qualification, on-orbit performance, and continuous improvement back into manufacturing.
Solar Cell Reliability Engineer (Starlink) SpaceXSolar Cell Reliability Engineer (Starlink)Bastrop, TXDefine, execute, and continuously improve the space reliability test matrix for HJT solar cells (e.g., thermal cycling, thermal vacuum, humidity/damp heat as applicable, UV/photo-stability, reverse bias / hotspot, mechanical shock/vibration at cell/coupon level, radiation exposure coordination, and accelerated life tests). We are looking for a Solar Cell Reliability Engineer who will own the reliability lab and the end-to-end reliability story for our solar cells in space —from wafer and cell process through module integration, environmental qualification, on-orbit performance, and continuous improvement back into manufacturing.
Sr. Hardware Engineer, Gateways & Customer Hardware (Starlink) SpaceXSr. Hardware Engineer, Gateways & Customer Hardware (Starlink)Bastrop, TX8+ years of experience designing and implementing mixed-signal circuit boards from concept through production using processors, FPGAs, Ethernet, multi-GHz Serdes, DRAM interfaces (DDR4), I2C, SPI, operational amplifiers, analog to digital and digital to analog converters, and power supply components. Our customers currently include teachers in the most remote parts of the Amazon, researchers in Antarctica, digital nomads who travel via RV, emergency responders, commercial airlines, cruise lines, and residential users who live in more rural or developing areas.
Sr. Hardware Engineer, Gateways & Customer Hardware (Starlink) Space Exploration TechnologiesSr. Hardware Engineer, Gateways & Customer Hardware (Starlink)Bastrop, TX8+ years of experience designing and implementing mixed-signal circuit boards from concept through production using processors, FPGAs, Ethernet, multi-GHz Serdes, DRAM interfaces (DDR4), I2C, SPI, operational amplifiers, analog to digital and digital to analog converters, and power supply components. Our customers currently include teachers in the most remote parts of the Amazon, researchers in Antarctica, digital nomads who travel via RV, emergency responders, commercial airlines, cruise lines, and residential users who live in more rural or developing areas.
Sr. Solar Cell Reliability Engineer (Starlink) Space Exploration TechnologiesSr. Solar Cell Reliability Engineer (Starlink)Bastrop, TXDefine, execute, and continuously improve the space reliability test matrix for HJT solar cells (e.g., thermal cycling, thermal vacuum, humidity/damp heat as applicable, UV/photo-stability, reverse bias / hotspot, mechanical shock/vibration at cell/coupon level, radiation exposure coordination, and accelerated life tests). Solar Cell Reliability Engineer who will own the reliability lab and the end-to-end reliability story for our solar cells in space-from wafer and cell process through module integration, environmental qualification, on-orbit performance, and continuous improvement back into manufacturing.
Solar Cell Reliability Engineer (Starlink) Space Exploration TechnologiesSolar Cell Reliability Engineer (Starlink)Bastrop, TXDefine, execute, and continuously improve the space reliability test matrix for HJT solar cells (e.g., thermal cycling, thermal vacuum, humidity/damp heat as applicable, UV/photo-stability, reverse bias / hotspot, mechanical shock/vibration at cell/coupon level, radiation exposure coordination, and accelerated life tests). We are looking for a Solar Cell Reliability Engineer who will own the reliability lab and the end-to-end reliability story for our solar cells in space-from wafer and cell process through module integration, environmental qualification, on-orbit performance, and continuous improvement back into manufacturing.