The following Physical Demands may be requirements of this job:** **Frequent** (3-6 Hrs.) + Carrying less than 10 pounds; Climbing/balancing (stairs, ladders, poles, scaffold); Finger manipulation (keyboarding, other); Flexion/Extension (head bent down, head bent back); Handling (holding, grasping); Lifting less than 10 pounds; Reaching (overhead); Rotation of head/neck; Sitting; Standing; Walking **Occasional** (1-3 Hrs.) + Bending at the waist; Carrying 10-35 pounds; Twisting at the waist; Use of low impact vibratory tools (drilling/sanding); Lying down (back, side, front); Operating of foot controls; Pushing/pulling 10-35 pounds; Pushing/pulling less than 10 pounds; Kneeling; Lifting 10-35 pounds; Crawling; Crouching (squatting) **The following Chemicals/Materials may be requirements of this job:** **Frequent** (3-6 Hrs.) + Metals (aluminum, brass, iron, Monel, nickel, steel); Plastics (acrylic, fiberglass, graphite, resins); Sealants (latex, polysulfide, silicon); Solvents (acetone, turpentine, MEK, MPK, Isopropho); Adhesives (epoxy, acrylonitrile, organic rubber) **Occasional** (1-3 Hrs.) + Alkalis (acid neutralizers, strong detergents); Liquid Coatings (etching mask, lacquer, penetrant d); Acids (boric, muriatic, nitric, hydrochloric) **The following Environmental Conditions may be requirements of this job:** **Continuous** (6-8 Hrs.) + Noise (constant or intermittent sounds or pitch) **Frequent** (3-6 Hrs.) + Nonionizing Radiation (sub-radio frequency, radio); Elevated Platforms (wings, lifts, cranes, ladders); Extreme Heat (ovens and furnaces) **Occasional** (1-3 Hrs.) + Atmospheric Conditions (fumes, noxious odors, dust); Confined Spaces; Welding Equipment (Arc/Cutting, Flux-Cored, Gas-Me) **The following Personal Protective Equipment may be requirements of this job:** **Continuous** (6-8 Hrs.) + Face/Eye Protection (safety glasses, goggles); Fall Protection (safety belts, harnesses, lifeline); Protective Footwear (steel-toed shoes, rubber boot) **Frequent** (3-6 Hrs.) + Protective Headwear (welding helmets, hard hats); Hand/Arm Protection (gloves, arm protectors); Hearing Protection (ear inserts, canal caps, earmuff) **This position is expected to be 100% onsite. **Position Responsibilities:** + Receive work assignment from team leader or supervisor and obtain necessary materials and equipment + Obtain appropriate engineering drawings and test documents, as required, for assignment if drawings, sketches, and documents are not with work assignment + Fabricate wire or fiber optic bundles used to connect various types of test and computer equipment together or test sensing equipment used to monitor and measure, for the purpose of collecting and storing data during test + Set up and perform qualification test, bench test, or automatic test as required per work assignment, test document, test equipment manuals, and/or engineering instructions + Install fiber optic strain gages, thermocouples, accelerometers, and strain gages by soldering, bonding, spot welding, or using mechanical fastening devices + Use a scissor or boom lift to access areas for instrumentation installation this work is performed both inside hangars and outside on airfields + Perform modification of test equipment to meet engineering configuration, as required + Select proper hand, power, and/or bench tools needed to perform required operation, such as screwdrivers, pliers, torque wrenches, crimpers, cable tools, band saw, drill press, and sander, as required + Use shop tools and any test equipment required to complete work assignment + Write tie-ins, and maintain records such as work log for areas/equipment as required + Devise and/or build shop aids and work around methods as necessary to test/troubleshoot systems + Handle and protect components and assemblies such as static sensitive equipment in accordance with shop procedures and drawing requirements + Handle and dispose of hazardous materials (ketone, naphtha, alcohol, epoxy, acids) in approved manner (in accordance with Safety Data Sheets) using personal protective equipment as required + Pack electronic equipment for travel as required per drawing and Boeing applicable specifications + Check work after completion of each operation to be sure job is per drawing or other instructions + Put completed job or reworked job up for inspection as required + Contact team leader/supervisor/engineer/planner when assistance is needed (e.g.