Staff Electrical Engineer Castelion CorporationStaff Electrical EngineerTorrance, CaliforniaTo conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. We are hiring experienced Electrical Engineers to specialize in high-speed digital design, flight computer architecture, and advanced avionics hardware development across our avionics organization.
Principal Electrical Engineer MiniMedPrincipal Electrical EngineerNorthridge, CaliforniaIf you are applying to perform work for MiniMed in any position which will involve performing at least two (2) hours of work on average each week within the unincorporated areas of Los Angeles County, you can find here a list of all material job duties of the specific job position which MiniMed reasonably believes that criminal history may have a direct, adverse and negative relationship potentially resulting in the withdrawal of a conditional offer of employment. Regular employees working 20 or more hours per week are eligible for a robust benefits package, including health, dental, and vision insurance, as well as access to a Health Savings Account, Healthcare Flexible Spending Account, life insurance, long-term disability leave, and a dependent daycare spending account.
Avionics Electrical Engineer HermeusAvionics Electrical EngineerLos Angeles, CA$91,800–$140,250 / year1+ years of experience in multiple of the following areas: electrical hardware design, control systems, instrumentation and signal conditioning, digital communication busses, analog design and simulation, power electronics, harness design. About The Role: As an Avionics Electrical Engineer at Hermeus, you will be responsible for the design, testing, and integration of GNC systems, electrical hardware, control software, power distribution, and RF communications for our hypersonic vehicles.
Senior Electrical Engineer (Digital) Impulse SpaceSenior Electrical Engineer (Digital)Redondo Beach, CA$145,000–$200,000 / yearThis position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. As a Senior Electrical Engineer (Digital) , your core responsibility will be to own architecture, design, and bringup of custom digital circuit boards for software defined radios.
Electrical Engineer II CesiumAstroElectrical Engineer IIEl Segundo, CA$100,000–$121,000 / yearPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. In this role, you will design, build, test, and troubleshoot engine control electronics, circuit boards, avionics integration, sensors, and instrumentation systems from development through flight-ready hardware.
Avionics Electrical Engineer (All Levels) Impulse SpaceAvionics Electrical Engineer (All Levels)Redondo Beach, CA$110,000–$150,000 / yearThis position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Experience doing new development work for any of the following: power converters, load switches, engine controllers, processors, or any other specialized area relevant to spacecraft or rockets.
Avionics Electrical Engineer (Electric Propulsion) Impulse SpaceAvionics Electrical Engineer (Electric Propulsion)Redondo Beach, CA$105,000–$135,000 / yearThis position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Demonstrated experience doing new development and hands-on work for any of the following: power converters, load switches, engine controllers, processors, or any other specialized area relevant to spacecraft or rockets.
Electrical Engineer Intern Castelion CorporationElectrical Engineer InternTorrance, CaliforniaCastelion is bringing a new approach to defense development and production: one that focuses on short, iterative design cycles, rapid testing in development, and modern commercial manufacturing strategies for production at scale. To conform to U.S. Government export regulations, the applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Electrical Engineer (Critical Infrastructure & Facilities) Impulse SpaceElectrical Engineer (Critical Infrastructure & Facilities)Redondo Beach, CA$115,000–$165,000 / yearAs an Electrical Engineer for Critical Infrastructure & Facilities at Impulse Space, you will play a pivotal role in advancing our aerospace capabilities by spearheading the development of cutting-edge facilities. Evaluate existing facilities and systems regularly, identifying opportunities for enhancement and implementing improvements to optimize operational efficiency.
Head Of Electrical (Hardware Design) FreeformHead Of Electrical (Hardware Design)Los Angeles, CA$175,000–$350,000 / yearThe ideal candidate will have extensive technical breadth in electrical engineering concepts as well as specific expertise in architecting, designing, and developing complex electromechanical systems and/or state-of-the-art robotic / automation systems. All leadership roles at Freeform are technical in nature so in addition to being a leader you will also be expected to spend a significant portion of your time working alongside the team as an individual technical contributor.
Electrical Integration Technician FreeformElectrical Integration TechnicianLos Angeles, CA$25–$40 / hourAs an Electrical Integration Technician, you will work closely with the engineering team to build, wire, test, and bring up the electrical systems behind our advanced metal 3D printing factory, including industrial control cabinets, power distribution, motor and servo drives, harnessing, high-voltage systems, and machine networking. The systems you build will power and coordinate the actuators, sensors, and controllers that run our state-of-the-art additive manufacturing lines, and you will help take them from schematic all the way to a fully commissioned, production-ready line.
(7653) Harnessing/Electrical Technician III PDS Inc, LLC(7653) Harnessing/Electrical Technician IIINorth Hollywood, CAExperience working around specialized systems such as vacuum chambers or furnace/reactor equipment is a plus, along with a strong attention to detail and commitment to delivering high quality electrical assemblies. We are seeking an experienced Harnessing / Electrical Technician to support hands on electrical assembly, cable fabrication, and system integration for advanced aerospace and ground support hardware.
(0757) Harnessing/Electrical Technician III PDS Inc, LLC(0757) Harnessing/Electrical Technician IIINorth Hollywood, CAExperience working around specialized systems such as vacuum chambers or furnace/reactor equipment is a plus, along with a strong attention to detail and commitment to delivering high quality electrical assemblies. We are seeking an experienced Harnessing / Electrical Technician to support hands on electrical assembly, cable fabrication, and system integration for advanced aerospace and ground support hardware.
(0010) Harnessing/Electrical Technician III PDS Inc, LLC(0010) Harnessing/Electrical Technician IIINorth Hollywood, CAExperience working around specialized systems such as vacuum chambers or furnace/reactor equipment is a plus, along with a strong attention to detail and commitment to delivering high quality electrical assemblies. We are seeking an experienced Harnessing / Electrical Technician to support hands on electrical assembly, cable fabrication, and system integration for advanced aerospace and ground support hardware.
Sr. Supplier Development Engineer (Electrical) Neros TechnologiesSr. Supplier Development Engineer (Electrical)Torrance, CaliforniaCapacity Planning & Analysis: Expert in conducting detailed capacity assessments at supplier sites, including equipment throughput, labor efficiency, and line balancing, to ensure supply readiness for NPI and mass production ramps. Design for Manufacturing (DFM) Expertise: Strong ability to analyze engineering design specifications and provide detailed feedback on manufacturability, ensuring smooth transition from design to high-volume production.
Electrical Engineer Salient MotionElectrical EngineerTorrance, CaliforniaWe are at the forefront of innovation, crafting exclusive motion control components that propel the industrial, aerospace, and defense sectors into the future. Familiarity with basic electronic lab equipment, such as: power supplies, oscilloscopes, DMMs, signal generators, and soldering irons.
NewElectrical Design Engineer (Falcon & Dragon Avionics) Space Exploration TechnologiesElectrical Design Engineer (Falcon & Dragon Avionics)Hawthorne, CA$105,000–$140,000 / yearAs an Electrical Engineer on the Falcon & Dragon Avionics Hardware Development team, you will have the unique opportunity to explore all areas of a product's life cycle from development through production and launch by engaging in multiple disciplines with a focus on electronic design, reliability, and manufacturing. In addition to designing new hardware from scratch, you will be expected to analyze and troubleshoot electronic assemblies, define new processes, design circuits/fixtures/tools, and identify opportunities for improvement in both products and processes.
Senior Electrical Engineer (PCB Layout) Castelion CorporationSenior Electrical Engineer (PCB Layout)Torrance, CaliforniaThis role requires strong technical judgment, the ability to drive layout decisions across analog, digital, RF, and power domains, and comfort leading fabrication and assembly partners through DFM and production readiness. To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Operations & Maintenance Technician IV - Electrical The Metropolitan Water District of Southern CaliforniaOperations & Maintenance Technician IV - ElectricalGranada Hills, CaliforniaRelevant Journey Level Experience is defined as: Demonstrated by practical application of general and advanced techniques and practices specific to the operation, maintenance, and repair of electrical systems in treatment or pump plants, conveyance and distribution, power generation systems, and related apparatus. Job Overview: At the Metropolitan Water District of Southern California, we deliver reliable water to a region with 19 million people—and to accomplish this, we rely on a team of talented employees: innovators, problem-solvers, and collaborators who make it all possible.
Senior Electrical Test Engineer, Sensors HRL LaboratoriesSenior Electrical Test Engineer, SensorsMalibu, CA$154,500–$197,900 / yearDrive sustaining and maturation activities, failure analysis, yield trends, and iterative improvement of prototypes and engineering builds• Develop lab infrastructure and supporting scripts for evaluation, characterization, and validation of products; build automation frameworks in Python / MATLAB / Simulink• Lead system level validation by defining test plans, developing pass/fail criteria, and ensuring release readiness through robust test coverage and reproducible results• Partner cross functionally to ensure requirements flow down, system integration readiness, and technical documentation needed for smooth transition to low rate production• Maintain configuration control, support engineering change processes, and prepare prototypes and early production IMUs for external evaluation and qualification. • Lead end to end IMU evaluation and characterization tasks supporting prototyping, product development, and sustainment, with emphasis on maturing hardware for transition out of R&D• Define and execute characterization strategies across environmental, dynamic, and operational conditions, including building and automating hands on test setups (temperature, vibration, shock)• Analyze performance data to identify key drivers, validate models, and perform root cause investigations of anomalies, and drift behaviors.•