NewElectrical Engineer (MEP) EPC STAFF Acquisition and Development, LLCElectrical Engineer (MEP)Portland, ORJob Description As part of the team, you’ll work alongside seasoned professionals on projects that include power distribution, lighting, fire alarm, and other electrical systems for mission-critical, healthcare, sports, and commercial / mixed-use residential buildings. KEY Responsibilities: Assist in the design of electrical systems, including power distribution, lighting, and fire alarms.
NewSr. Electrical Engineer, Reliability and Maintenance Messer LLCSr. Electrical Engineer, Reliability and MaintenanceVancouver, WA$110,000–$146,000 / yearProvide technical, troubleshooting and maintenance support to all ASU, CO2, H2 and He plants within the fleet for all electrical issues, including 138kV substations, High/Medium/Low voltage switchgear, Motor Control Centers, Variable Frequency Drives, Battery & UPS system, DCS & PLC Controls, large motors up to 35,000HP. Messer is the world’s largest privately held industrial gases company and what we do matters because it is woven into every part of life, from the medical gases that patients rely on to the essential elements needed to safely and sustainably produce the goods our communities depend on.
NewElectrical Construction Traveling Senior Project Manager NTS EC ElectricElectrical Construction Traveling Senior Project Manager NTSPortland, OR$135,000–$180,000 / yearBachelor’s degree in electrical engineering plus 10 years’ construction project experience; or in lieu of degree, 5 years’ experience as an Electrical Foreman or General Foreman on large projects, plus 10 years as a Project Manager required. The Senior Project Manager is fully responsible for cultivating opportunities for future construction projects by providing excellent customer service, injury free environment by ensuring safe work practices, maintaining quality assurance, and building a financially successful project.
NewTechnician III (Electrical Assembly 1st Shift) Ultra Clean Technology Systems & Svc IncTechnician III (Electrical Assembly 1st Shift)Hillsboro, ORThe Electrical Assembly Technician III is an advanced-level role responsible for assembling, wiring, testing, and troubleshooting complex electrical systems and subassemblies. We indirectly touch every semiconductor chip that goes into every smartphone, smart car, and device that uses artificial intelligence.
NewSenior Electrical Technician - Assembly & Wiring (1st Shift) Ultra Clean Technology Systems & Svc IncSenior Electrical Technician - Assembly & Wiring (1st Shift)Hillsboro, ORWe are looking for a Senior Electrical Assembler to join our team—someone who brings deep expertise in power box builds, wiring, routing, and low‑voltage assemblies , along with strong troubleshooting and collaboration skills. At our Products Division in Hillsboro, OR we specialize in advanced electrical and mechanical assemblies that support critical semiconductor manufacturing equipment.
NewElectrical Project Manager Elite ElectricElectrical Project ManagerPortland, ORRead and interpret blueprints, schematics, and technical drawings to determine the layout of electrical wiring and equipment. Job Description We have been committed to providing quality electrical services in the greater Portland metro area since 2010.
NewManufacturing Engineering Manager Vexos, IncManufacturing Engineering ManagerVancouver, WAIn accordance with 22 CFR § 120.62, this access is limited to U.S. Persons — defined as U.S. citizens, U.S. nationals, lawful permanent residents ("green card" holders), and individuals admitted as refugees or granted asylum under applicable U.S. law — unless appropriate government authorization is obtained. \nCompany Description VEXOS is a rapidly growing and successful Electronics Manufacturing Services (EMS) provider that delivers innovative solutions to High Technology organizations worldwide.
NewSenior Electrical Estimator RosendinSenior Electrical EstimatorHillsboro, ORAfter the successful bid at project turnover, meet with the Project Management departments to fully explain job scope, potential areas of attention and other aspects for the successful transition of the project. YOUR NEXT OPPORTUNITY: The Senior Estimator is responsible for preparing and completing bid/submittal documents and cost estimates for electrical construction projects.
NewProcess Integration Engineer Jireh SemiconductorProcess Integration EngineerHillsboro, ORWork with the Product Engineering and Reliability group to test, characterize and evaluate device and processNew Product IntroductionCollaborate with product engineering team to perform NPI (New Product Introduction) on existing platform (analysis DOE/Pre-Production lots data/documentation according NPI procedure to release new product)Yield monitor/improvementresponse to newly released platform safe launch stage yield monitor/improvement actions low yield root cause identification (through failure analysis, inline data analysis and lot history)provide solution for low yield through process condition splits designREQUIRED EDUCATION & EXPERIENCEMaster's or PhD in Electrical Engineering or a related engineering degree3+ years of experience in a development role ( power device development is preferred)Working knowledge in semiconductor process technology and wafer fabricationPREFERRED QUALIFICATIONS & SKILLSThe ideal candidate will have knowledge of semiconductor device physics and experience with device processing and integration, test structure definition, design rule generation, DOE, failure analysis, process control document (PCD) generation, and device characterization. AOS's portfolio of products targets high-volume applications, including but not limited to portable computers, flat panel TVs, LED lighting, smart phones, battery packs, consumer and industrial motor controls and power supplies for TVs, computers, servers and telecommunications equipment.
NewControl Systems Engineer - Vancouver/Portland WEMCO, Inc.Control Systems Engineer - Vancouver/PortlandVancouver, WAWashington Equipment Manufacturing Company, Inc. (WEMCO, Inc.) is a contract manufacturer that specializes in the design, engineering, and manufacturing of productivity enhancing solutions, such as: overhead cranes for material handling, automated aerospace tooling and parts, agricultural equipment, and custom machinery used in multiple industries around the world. Job Purpose: As a Controls Engineer, you will utilize computer-aided software to review, modify, and design electrical systems while simultaneously validating and improving the performance of electromechanical equipment and components.
NewManufacturing Process Control Engineer Milegon LLCManufacturing Process Control EngineerCanby, ORThe Manufacturing Process Control Engineer works alongside operators, technicians, Manufacturing Engineering, Quality, and Production teams to establish and maintain process parameters, troubleshoot equipment and process issues, reduce variation and defects, and ensure manufacturing processes remain stable, repeatable, and capable over time. The Manufacturing Process Control Engineer is responsible for owning, sustaining, troubleshooting, and improving manufacturing processes to ensure consistent execution, stability, quality, and production performance.
NewSignal Integrity Engineer Amphenol TCSSignal Integrity EngineerVancouver, WAAmphenol Corporation is one of the world’s largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and coaxial and high-speed specialty cable. Amphenol High Speed Products Group is the market leader for high speed, high bandwidth electrical connectors for the Telecom/Datacom market (Mobile Networks, Storage, Servers, Routers, Switches, etc.).
NewProcess Engineer - Thin Films Jireh SemiconductorProcess Engineer - Thin FilmsHillsboro, ORDUTIES & RESPONSIBILITIESSupporting and developing Thin Films deposition processes in the 200mm fabOptimizing and developing new processes and process controls for lower cost, higher productivity and enabling new productsImplementing and refining SPC controls to reduce process variation without personnel interventionPerforming statistically designed experiments, analyzing, writing report, qualifying process changesDisposition of discrepant material, troubleshoot process drift or human error, diagnose and implement preventative actions in a cost effective mannerMaintain documentation necessary for proper operation of the equipmentWriting specs of processes and operations, qualification plans, weekly updates, documentation of scrap and reworkImproving the performance of the area using Lean manufacturing techniquesREQUIRED EDUCATION & EXPERIENCE BS, Master or Ph. D. degree in electrical engineering, chemical engineering, material science, or other related discipline5+ years in Thin Films experience required (experience in Diffusion helpful)Experience in CVD and or PECVDExperience with defect reductionOTHER QUALIFICATIONS Strong background in statisticsMust have CVD/PVD process experienceMust have skills and ability to apply SPC to controlling processesMust have strong written and verbal communication skillsDemonstrated ability to work with people one on one and in a team environmentDemonstrated problem solving initiative in work area*Pay range listed in this job posting is an estimate only, and is not necessarily reflective of actual compensation that may be earned, nor a promise of pay for any specific employee future or past.
NewEngineer II RosendinEngineer IIHillsboro, ORWHAT YOU'LL NEED TO BE SUCCESSFUL: Requires working electrical engineering knowledge, including power distribution, lighting, grounding, energy conservation, and value engineering related to designing state-of-the-art constructible projects. Knowledge of various electrical engineering concepts, including power distribution, lighting, grounding, energy conservation, and value engineering related to designing state-of-the-art, constructible projects.
NewChemical / Process Engineer Norwest Engineering, Inc.Chemical / Process EngineerPortland, OR$85,000–$110,000 / yearWork with vendors to obtain quotes and data sheets for various equipment (control valves, pumps, instrumentation, tank, heat exchangers, etc.) Work with senior engineers to review and specify the appropriate equipment. Review, understand, and check ortho-graphics, isometrics, bill of materials, line lists, valve lists, and tie-in lists for piping design projects (with limited supervision by senior engineers.)
NewProject Engineer Lead Advanced Technical Staffing SolutionsProject Engineer LeadVancouver, WASUPERVISORY RESPONSIBILITY: Shall have capability of leading a team of engineers (up to 10), designers and engineering subcontractors, generating and managing schedules and budgets with assistance from the Chief Naval Architect. ·Provide engineering and technical leadership on assigned Program/Project, supporting internal departments, customers, suppliers, and subcontracted design agents.
NewHydraulic Systems Engineer HYDRA-POWER SYSTEMS INCHydraulic Systems EngineerPortland, ORThe Systems Engineer is an individual contributor who is responsible for developing complete, engineered hydraulic solutions from sales descriptions and sketches, including hydraulic and electrical circuit design, mechanical design, and component selection. Displays excellent communication skills including presentation, persuasion, and negotiation skills required in working with customers and coworkers, including the ability to communicate effectively and remain calm and courteous under pressure.
NewTait Radio Engineer BizTek People, Inc. | APA International Placement ConsultantsTait Radio EngineerPortland, ORConfiguration & Programming: Configure and program Tait radio equipment, including subscriber radios, base stations, and network controllers, using Tait software tools (e.g., Tait System Management, DMR Administrator, Enable Fleet). The ideal candidate will possess a deep understanding of Tait Communications products and technologies, with a proven track record in the design, installation, configuration, and troubleshooting of complex radio systems.
Process Engineer - RF Test INTELProcess Engineer - RF TestLafayette, OR$172,200–$243,000 / yearAs a Senior HBI Module Development Engineer for Die-to-Wafer Hybrid Bonding (HBI), you will drive equipment development and manufacturability for next-generation hybrid bonding technologies, enabling Intel's leadership in advanced packaging for high-performance computing, AI, and chiplet architectures. You will bring deep technical expertise in hybrid bonding process or equipment engineering, contributing to both first-of-a-kind (FOK) platform development and optimization of manufacturing processes to support development and high-volume manufacturing environments.
NewEnergy Engineer Pacific Energy ConceptsEnergy EngineerVancouver, WA$88,000–$110,000 / yearWe deliver customized energy-efficiency solutions (like EV Charging Stations, LED Lighting, advanced controls, and Energy Monitoring) that go beyond energy savings, helping our partners "run efficient, save money, and work happy" all while reducing their carbon footprint. This role owns on-site and remote technical execution, including audits, system design, installation, commissioning, data validation, and post-deployment troubleshooting across PEC’s Energy Monitoring and EVSE offerings.