June 23, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com.
Master's degree or equivalent experience in Optics, Optical Sciences, Optical Engineering, Physics, Mechanical Engineering, Electrical Engineering, Computer Sciences, or a similar field. The ideal candidate will have strong experience in optical testing, calibration, data analysis, and test automation and a proven ability to develop and execute test procedures, analyze results, and drive hardware quality.
p/>USD is an industry leader in developing, applying, and advancing the state-of-the-art signal processing technologies for Command, Control, Communications, Computers, Intelligence, Surveillance and Reconnaissance (C4ISR) systems including distributed netted sensor systems, communications systems, positioning systems, tactical decision systems, and autonomous unmanned platforms. June 22, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.
The ideal candidate will have strong experience in display technology, image processing, and algorithm validation across hardware and software and a proven ability to plan and deliver end-to-end validation milestones that meet image quality requirements on real hardware. Drive cross-functional alignment and execution across interdependent workstreams including display hardware, testing, software, and architecture, ensuring dependencies are tracked and gaps are closed.
In this role, you will work as part of a team to combine scientific and engineering principles, data driven techniques, and the most current experimental methods with robust subject-specific scientific expertise, to implement high-value solutions to complex technical problems. For over five decades, we've connected the lessons of past failures with tomorrow's solutions to advise clients as they innovate technologically complex products and processes, ensure the safety and health of their users, and address the challenges of sustainability.
Our broad range of markets, clients, and services, coupled with industry-leading talent, provides unique and exciting opportunities to grow as professionals, serve clients, and make a difference in our communities. Coffman offers comprehensivebenefits, a flexible PTO program, supportive office environment, professional development opportunities, and regular employee activities (breakfast, wellness activities BBQs, and various social and community activities).
Design & Technical Leadership* Apply advanced electrical engineering concepts to solve complex problems* Lead electrical design efforts for industrial and aerospace facilities* Perform complex engineering and economic calculations and modeling* Develop specifications (including Division 1) and construction estimates* Peer review large-scale electrical projects and produce detailed reports. Project Management & Collaboration* Manage multiple long-term projects involving senior engineers and subconsultants* Seal drawings and provide technical direction to design teams* Lead construction meetings, review submittals, and produce punch lists and meeting reports* Participate in client presentations and professional organizations.
The company specializes in designing, fabricating, and installing complex HVAC, process piping, and other mechanical, electrical, and plumbing (MEP) systems-enhancing energy efficiency, reliability, and sustainability in new and existing facilities. Third-Party Recruiting DisclaimerLegence and its affiliates do not accept unsolicited resumes from agencies; any such submissions without a prior signed agreement authorized by Legence Holdings LLC's CHRO or Director of Talent Acquisition will not incur fees and are considered property of Legence.
Non-Technical:* Experience mentoring emerging professionals and guiding them through technical challenges* Demonstrated ability to improve processes, elevate team performance, and implement sustainable, high-impact solutions* Open to giving and receiving constructive feedback to foster continuous learning and collaboration* Prioritizes team goals over personal recognition and consistently builds lasting relationships grounded in trust, accountability, and mutual respect* Self-motivated, inquisitive, and detail-oriented; comfortable solving complex problems in a fast-paced, collaborative environment* Strong organizational skills with a focus on reliability and responsivenessJob Duties: Pre-Design Engineering * Perform field surveys for the design of electrical systems, gather information, and prepare site assessment reports.* Construction Administration * Provide timely, thoughtful responses to RFIs, maintaining a high level of service and client satisfaction throughout construction* Review submittals with a detail-oriented and quality-driven mindset to ensure engineering intent and code compliance* Foster collaboration and trust with contractors and field teams by being accessible, clear, and solution-oriented during construction phases* Participate in punch walks and prepare punch list reports with a focus on delivering excellence and functional completeness* Uphold accountability and integrity by ensuring that final systems reflect design intent and contribute to long-term client success* Serve as a technical advocate for the client during construction, proactively addressing challenges to maintain design vision and project momentum.
and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. ITAR RequirementsTo conform to U.S. Government commercial space technology export regulations, including the International Traffic in Arms Regulations (ITAR), 8 U.S.C. § 1324b(a)(3), applicants for employment at Blue Origin must be a U.S. citizen or national, lawfully admitted for permanent residence into the U.S. (i.e. current green card holder), or lawfully admitted as a refugee or granted asylum under 8 U.S.C. § 1157-1158.
East Port Orchard, WA30+ days ago
Provides on-site passive Radio Frequency Identification (pRFID) technical expertise and support to oversee the successful operations of electronics, devices, and other system-of-systems components. Individual salaries are determined by various factors including, but not limited to location, internal equity, business considerations, client contract requirements, and candidate qualifications, such as education, experience, skills, and security clearances.
We are looking for a leader who works effectively with all personality types, is interested in developing close relationships with our great clients, and who desires to grow professionally and stay involved in the activities and exciting trends in the industry. Our broad range of markets, clients, and services, coupled with industry-leading talent, provides unique and exciting opportunities to grow as professionals, serve clients, and make a difference in our communities.
KJ is at the forefront of developing sustainable solutions for clients, including green infrastructure design, strategies to reduce energy use and environmental impacts, award-winning water reuse projects, and efficient construction management practices that ensure quality, safety, and on-time delivery. Staff Electrical Engineer. to join our team and shape the future of water and wastewater infrastructure in California and across the U.S. Work alongside industry experts, contribute to meaningful projects, and grow your career in a supportive, collaborative environment.
The range of competencies includes voltage classes from 120V to 765kV, generating plant and substation design and implementation, substation equipment upgrades, relay and protection upgrades, Power System Studies, renewable design and implementation / interconnection, distribution system upgrades, water wastewater system designs, building electrical upgrades, and more. We have also created an internal culture that provides the resources and technology needed to encourage personal and professional growth opportunities through reimbursement for education; a free in-house resource for hundreds of educational and self-enrichment courses; mentorship program; wellness program; Women's Organization and ongoing philanthropic opportunities.
Person" means (i) a U.S citizen or U.S. national; or (ii) any natural person who is a U.S. Lawful Permanent Resident (i.e., holds a Green Card), as defined by 8 U.S.C. 1101(a)(20) or as a "protected individual" defined by 8 U.S.C. 1324b(a)(3) (i.e., admitted as a refugee or is granted asylum). Develop and review documentation relating to electrical subsystems including Specifications, Interface Control Documents (ICDs), Bill of Materials (BOMs), Test Plans & Procedures, and Test Reports.
This senior-level role is ideal for a licensed Professional Engineer with extensive experience in high-voltage substations, including physical layout, protection and control coordination, and interdisciplinary design integration. Hanson Professional Services Inc. is seeking an experienced Electrical Engineer specializing in Substation Design to support power delivery projects for utility, municipal, and industrial clients.