84 Results for

Electrical Engineering Jobs in Warner Robins, GA

Jobs

Robins Air Force Base, GA12 days ago

Works with Government and Contractor personnel to oversee Multi-INT related work performed by private industry, such as design, analysis, and testing of Multi-INT systems and subsystems on, but not limited to ground based and airborne ISR systems/subsystems. International Council on Systems Engineering certification: Associate Systems Engineering Professional, or Certified Systems Engineering Professional, or Expert Systems Engineering Professional certification, or demonstrate a consecutive twelve months of DoD acquisition work experience, or.

New!

Warner Robins, GA5 days ago

$66,705–$95,000
Full-time
Employee

Identifies opportunities for follow-on tasking for current projects; develops related briefings, specific project proposals, and works through appropriate channels to schedule presentation of these briefings and proposals to prospective customers. Data analysis, root-cause analysis and tear down analysis of aircraft electrical, electronic, and electro-mechanical components and subsystems, including embedded software, to identify problems causing poor reliability and/or performance.

Macon, GA30+ days ago

Performing all aspects of electrical engineering design (specifically power distribution) as a Senior or Lead Engineer, including Conceptual Studies, Program Requirements, Design Analyses, Calculations, Equipment selection and layout, and System selection and layout for building design and site electrical utilities. A Senior Electrical Engineer will be responsible for performing, directing, and supervising all aspects of Electrical Engineering on multi-discipline building design projects of moderate to large scope for commercial, municipal, university and government facilities.

Macon, GA30+ days ago

$165,000–$250,000
Full-time

Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.

Forsyth, GA30+ days ago

This position partners closely with project management, EPC contractors, OEMs, and plant leadership to ensure successful delivery of the project and will transition into the lead plant electrical engineering role following commercial operation. The Senior Electrical Engineer plays a critical role in the development, construction, commissioning, and long-term operation of Oglethorpe Power's new 1,500 MW combined cycle facility.

Suwanee , Georgia30+ days ago

In this role of Electrical Engineer 2, as part of a multidisciplinary engineering and construction team, you will develop and integrate building power and lighting engineering deliverables for complex and challenging electrical construction projects in the mission critical, healthcare, industrial, transportation, pharmaceutical, federal, and fortune 500 sectors. Originate and execute detailed design with limited supervision by Senior Engineers, including the design or integration of the following: Normal power medium and low voltage distribution systems.

Warner Robins, Georgia30+ days ago

The candidate must be able to effectively apply practical engineering knowledge of a wide range of established system engineering principles, concepts and methods, ensure Operational Safety, Suitability, and Effectiveness (OSS&E) is considered in all activities. Provide electrical engineering support for programs and projects, to include support for all system engineering research, design, development, installation, testing, and operation aspects of the systems under the responsibility of the IPT.

Macon, GA30+ days ago

Graduate of an ABET-accredited 4 or 5-year engineering program in one of the following disciplines: Electrical Engineering (Building design or power distribution focus), Electrical Engineering Technology (Building design or power distribution focus), Architectural Engineering (Electrical Engineering focus), or Architectural Engineering Technology (Electrical Engineering focus). Clark Nexsen is seeking an Electrical Engineer (PE) who will be responsible for performing, directing and supervising all aspects of electrical engineering on multi-discipline building design projects of moderate to large scope for commercial and government facilities.

New!

Macon, GA1 day ago

The role involves supporting multiple projects, managing suppliers and contractors, and providing technical expertise in electrical systems, control systems, and automation. Electrical Controls Engineer supports division projects, typically ranging from $1M to $15M, focusing on electrical and controls aspects of manufacturing initiatives.

Macon, GA25 days ago

Performing all aspects of electrical engineering design (specifically power distribution) as a Senior or Lead Engineer, including Conceptual Studies, Program Requirements, Design Analyses, Calculations, Equipment selection and layout, and System selection and layout for industrial process design and site electrical utilities with minimal direction from supervising staff. An Industrial Electrical Technical Designer III will be responsible for performing, directing, and supervising all aspects of Electrical Engineering on multi-discipline industrial process design projects of small to large scope for facilities that process minerals, fertilizers, pulp and paper, and petrochemicals, among others.

Macon, GA30+ days ago

In addition, during employment individuals may be required by CDM Smith or a CDM Smith client to successfully complete additional background checks, including motor vehicle record as well as drug testing. We provide career opportunities that span a variety of disciplines and geographic locations, with projects that our employees plan, design, build and operate as diverse as the needs of our clients.

Macon, GA24 days ago

Performing all aspects of electrical engineering design (specifically power distribution) as a Senior or Lead Engineer, including Conceptual Studies, Program Requirements, Design Analyses, Calculations, Equipment selection and layout, and System selection and layout for industrial process design and site electrical utilities with minimal direction from supervising staff. An Industrial Electrical Technical Designer III will be responsible for performing, directing, and supervising all aspects of Electrical Engineering on multi-discipline industrial process design projects of small to large scope for facilities that process minerals, fertilizers, pulp and paper, and petrochemicals, among others.

Suwanee , Georgia30+ days ago

Research, prototype, and develop emerging technologies by working closely with industry partners and OEMs to implement the latest and best-in-bread capabilities to meet the customers emerging needs. Power Distribution Design: Develop comprehensive power distribution designs for various projects, optimizing efficiency and reliability while accounting for load calculations, cable sizing, switchgear selection, and protective devices.

Robins Air Force Base, Georgia30+ days ago

Responsible for ensuring excellent engineering support to supply chain management and compliance with the Operational Safety, Suitability, and Effectiveness (OSS&E) requirements of supported AFLCMC aircraft and commodity Chief Engineers. Knowledge of developmental testing and evaluation sufficient to apply experimental theories and new applications to issues and provide technical advice and direction in support of weapon systems, subsystems, and/or support equipment.

Macon, GA30+ days ago

Warner Robins, GA15 days ago

Must be able to climb stairs, ramps, ladders, and work stands, working at heights with fall protection devices. Test development software experience is desired (i.e. NI Labview, LabWindows/CVI, TestStand, and/or ATEasy).

Warner Robins, GA15 days ago

VHDL and/or Verilog experience with demonstrated experience in designing and developing digital signal processing algorithms on FPGAs. 2-3 years of test development software experience is desired (i.e. NI Labview, LabWindows/CVI, TestStand, and/or ATEasy).

New!

Macon, GA1 day ago

The ideal candidate holds a Bachelor's in Electrical Engineering, with experience in power systems, excitation calibration, switchgear, and protective relaying. Key duties involve maintaining technical proficiency, building plant relationships, solving problems efficiently, and mentoring new employees.

New!

Atlanta , Georgia4 days ago

Collaborate with senior management, supervisory personnel, owners, contractors, and design professionals to discuss and resolve work procedures, complaints, and construction problems. Headquarters in Tysons, Virginia, M.C. Dean delivers resilient, secure, and innovative power and technology solutions through engineering expertise and smart systems integration.

Gray, GA30+ days ago

Full-time

Test electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures using testing devices such as ohmmeters, voltmeters, and oscilloscopes. Duties: Install, maintain, and repair electrical systems and equipment in accordance with local, state, and national electrical codes.

Macon, GA30+ days ago

Full-time

Inspects and evaluates electrical equipment to ensure that it operates efficiently and safely; determines whether equipment and new installations meet requirements of the National Electrical Code. Ability to read blueprints, bend and thread rigid conduit, wire and terminate devices, perform quality control testing and troubleshooting.

Bonaire, Georgia30+ days ago

Perform test station confidence verification and calibration, setup and testing of Line Replaceable Unit (LRU) or UnitUnder Test (UUT) per Technical Order instruction or engineering direction. Specific tasks include: Removal and replacement of Tester Replaceable Units (TRU), software upgrading and loading, TRU calibration and functional testing.

ANDERSONVILLE, GA30+ days ago

$70,000–$90,000 Per Year

Examine and troubleshoot equipment to diagnose source of problems, offer solutions, perform repairs, replace broken or defective parts, and make necessary adjustments for operation. Pressure, Temperature, Level, Flow Measuring and Control Instruments - Work in shop and field to adjust and calibrate devices, repair and replace damaged parts.

New!

Atlanta , Georgia6 days ago

Master’s Degree in Electrical Engineering, Mechanical Engineering, Industrial Engineering, Computer Science, Computer Engineering, Math or Physics preferably from an ABET accredited program with 5+ years of experience in any Engineering discipline with Construction experience . Bachelor’s Degree in Electrical Engineering, Mechanical Engineering, Industrial Engineering, Computer Science, Computer Engineering, Math or Physics preferably from an ABET accredited program with 7+ years of experience in any Engineering discipline with Construction experience OR.

Atlanta , Georgia30+ days ago

This role is responsible for supervising QC personnel, ensuring contract compliance, driving consistent implementation of the 3-Phase Quality Control process, and serving as the primary quality liaison with project leadership, General Contractors, and Owners. Headquarters in Tysons, Virginia, M.C. Dean delivers resilient, secure, and innovative power and technology solutions through engineering expertise and smart systems integration.

Atlanta , Georgia30+ days ago

$112,400–$168,600 Per Year

Demonstrated vendor and subcontractor management including procurement, material expediting, prefab/assembly shop oversight, and contract change management; solid budget ownership skills including forecasting, variances, and change order negotiation. Strong site logistics experience (laydown, hoisting/crane coordination, temporary utilities), quality assurance processes, punch list and closeout management, warranty turnover, and asset documentation capabilities are required.

Atlanta , Georgia30+ days ago

Tools & Equipment - Identify all tools and equipment required to support each crew (Gang box Assignments, tool inspection and keep track of tools by signing sheet in-out). Candidates must demonstrate physical strength and stamina to perform various tasks, including but not limited to, loading, and unloading, operating equipment, and assisting in the transportation of various materials.

Atlanta , Georgia30+ days ago

An Electrical Foreman is responsible for planning, organizing and scheduling crews to complete assigned work orders, including assigning tasks, assuring the work is being installed in a high-quality manner and performing quality inspections. Initiate Various Discrepancy Notices (EDN, DDN, PDN, FDN, ADN, PITDN, CDN) in order to ensure issues arising during construction are properly documented and communicated for resolution.

Newton County, GA30+ days ago

Bachelor’s degree or trade certification in related field plus 2+ years relevant electrical industry experience will be considered in lieu of 6+ years relevant electrical industry experience. Plan resource, author or approve work procedures to cover electrical troubleshooting, repair, retrofit, and maintenance activities, with an emphasis on assessing & mitigating personnel and critical systems and operational risk.

Atlanta , Georgia30+ days ago

Perform all quality reporting requirements outlined in the MCD Quality Management System (including the inspection checklists, Data Collection Reports (PDCR), hold logs, discrepancy notices, waiver logs etc.) Identify for segregation nonconforming units following the MCD Nonconformance procedure for prefabricated and purchased products. Participate in Initial Inspection to assure all required/approved materials, personnel and equipment are available, verify the site conditions, inspect the initial installation of the work and identify the required level of workmanship, quality, and safety measures.

Newton County, GA30+ days ago

You will focus on speed to market and be a critical partner for the Delivery Team and the Project Controls Lead to forecast and help mitigate schedule-related risks and issues on the project, enable commercial accountability, manage schedule health reporting/escalation, and ensure that schedule change management is effective and expedient. This position will work closely with the DEC (Design, Engineering, and Construction) Technical Operations team and various internal departments, including Site Project Management teams, Pre-Construction, Contracts, Finance, Accounting, Sourcing, and Operations Engineering.

Suwanee , Georgia30+ days ago

Control Engineers work in various applications including industrial controls, cybersecurity, building automation, water / wastewater, power controls and protection, energy management, and transportation systems. Headquarters in Tysons, Virginia, M.C. Dean delivers resilient, secure, and innovative power and technology solutions through engineering expertise and smart systems integration.

Atlanta , Georgia30+ days ago

Headquarters in Tysons, Virginia, M.C. Dean delivers resilient, secure, and innovative power and technology solutions through engineering expertise and smart systems integration. With over 7,000 employees, our capabilities span electrical, electronic security, telecommunications, life safety, automation and controls, audiovisual, and IT systems.

Warner Robins, GA30+ days ago

Full-time

The candidate will be involved with product sustainment, product development, lab support, and engineering services in support of the Operational Flight Program (OFP), Test Program Set (TPS) development and support, Intelligence, Surveillance and Reconnaissance software and Mission Support (MS) business lines. Candidate will assist in evaluating current systems, planning of large-scale system projects, purchasing, installing and support of network communications, including LAN/WAN systems.

North America/USA/Georgia/Atlanta, GA30+ days ago

Typical design tasks include writing design specifications, performing design analysis and simulations, capturing circuit schematics, participating in design reviews, leading PCB layout process, creating BOMs and assembly drawings, authoring test specifications, and overseeing prototype, engineering validation, design verification, and agency certification phases of projects. • Perform thermal simulations to analyze and optimize the thermal performance of the power electronics system; collaborate with mechanical engineers and thermal experts to implement appropriate cooling and heat dissipation techniques and to ensure effective thermal management of the motor controller.

Atlanta , Georgia30+ days ago

Headquarters in Tysons, Virginia, M.C. Dean delivers resilient, secure, and innovative power and technology solutions through engineering expertise and smart systems integration. We design, build, operate, and maintain cyber-physical solutions for the nation’s most mission-critical facilities, secure environments, complex infrastructure, and global enterprises.

Atlanta , Georgia30+ days ago

As part of (SES) Strategic Business Unit you will be part of a team that designs, engineers, integrates, operates and maintains electronic security services inclusive of intrusion detection, access control, biometric authentication, video surveillance, audio visual, it systems, perimeter defense and command and control systems for federal, local and commercial customers across high-growth markets. Research, prototype, and develop emerging technologies by working closely with industry partners and OEMs to implement the latest and best-in-bread capabilities to meet the customers emerging needs.

Atlanta , Georgia10 days ago

The responsibilities include the administration and maintenance of high performance computer configurations as well as other systems and peripherals' participating in system integration projects, system performance analyses, problem resolution, and system security initiatives; works with senior staff in the development of system management tools; and works with other Company Departments to provide a comprehensive support infrastructure for a wide range of commercial, corporate, and governmental users. Providing systems support for a large-scale, high performance computing center to include the installation and management of computer systems, workstations, operating systems, peripherals, and system interfaces; works with senior staff to monitor system usage and evaluate performance against defined performance goals; additional duties include the development and maintenance of systems documentation.

Macon, GA30+ days ago

Full-time

Role Operator- Engineer Location Macon, GA Duration 12+months (Possible Extension) Shift 1st shift Pay Range $25– $828.50 per hour on W2 Job Description: Desired Qualifications A Distribution Systems Operator Engineer is a key position within the utility or energy sector responsible for ensuring the efficient and safe distribution of electricity or gas to customers. Certifications Depending on the employer and location, certifications such as NERC (North American Electric Reliability Corporation) certification or other relevant industry certifications may be desired or required.

Atlanta , Georgia10 days ago

The responsibilities include the administration and maintenance of high performance computer configurations as well as other systems and peripherals' participating in system integration projects, system performance analyses, problem resolution, and system security initiatives; works with senior staff in the development of system management tools; and works with other Company Departments to provide a comprehensive support infrastructure for a wide range of commercial, corporate, and governmental users. Qualifications: Bachelor's degree in System Engineering, Computer Science, Information Systems, Engineering Science, Engineering Management, or related discipline from an accredited college or university is required with 5+ years of experience in programs and contracts of similar scope, type and complexity.

New!

Warner Robins, GA1 day ago

Seeking a motivated Senior Engineer II to support USAF systems at Robbins AFB, GA, working closely with technical teams on platforms like F-15, F-35, B-1B, and others. Responsibilities include product sustainment, system evaluation, network support, technical documentation, customer support, and project management in an Agile environment.

New!

Warner Robins, GA1 day ago

The candidate will support product sustainment, development, lab support, and engineering services related to flight programs, test sets, and ISR software within the Software Maintenance Group. Responsibilities include providing technical support to customers, conducting acquisition, testing, and verification, developing technical specifications, and maintaining lifecycle sustainment efforts.

Suwanee , Georgia30+ days ago

Able to develop equipment specifications such as switchgear, generator and generator plants, large UPS systems, load break switches, motor control centers, etc. and capable of performing calculations for required short circuit and overcurrent protective device ratings. Experience in leading a team in completing project document preparation for small to medium size projects, including but not limited to: construction documents, Specifications, AHJ approval, construction administration and project closeout.

Atlanta , Georgia30+ days ago

The Commissioning Engineer team is responsible for performing final testing, startup, and commissioning of low and medium voltage electrical distribution equipment, including breakers, transformers, switches, switchgear, relays, and motor control centers, as well as other electrical apparatus both in the field and in a manufacturing environment. Basic power system familiarity with switchgear, transformers, circuit breakers, power panels, protection relays, UPS systems, power monitoring systems, test equipment, etc.

Atlanta , Georgia30+ days ago

$135,120–$202,680 Per Year

Headquarters in Tysons, Virginia, M.C. Dean delivers resilient, secure, and innovative power and technology solutions through engineering expertise and smart systems integration. Responsibilities: Lead and manage the overall commissioning program across all disciplines (electrical, mechanical, controls, fire protection, life safety, IT/low‑voltage).

Warner Robins, GA15 days ago

The engineer will collaborate closely with software, hardware, and systems engineering teams to deliver optimized, reliable, and mission‑critical FPGA architectures tailored for performance, device utilization, power efficiency, and thermal requirements. Establish and maintain effective communication channels with customers, program managers, and stakeholders to address concerns and provide regular project updates.

Atlanta , Georgia30+ days ago

$54.11–$67.64 Per Hour

Participates in and contributes to technical meetings with customers, design engineering, construction, vendors, and commissioning leadership to resolve system and integration issues. Supports and contributes to constructability and design coordination reviews, identifying potential commissioning, access, sequencing, and testing challenges across MEP systems.

Atlanta , Georgia30+ days ago

Control Engineers work in various applications including industrial controls, cybersecurity, building automation, water / wastewater, power controls and protection, energy management, and transportation systems. System administrator experience in performing triage on system problems, resolving the system problems, analyzing system data to prevent problems, and implementing new workstations and system extensions.

Resume Resources

Free Resume Templates Free Resume Builder

Get noticed by top employers!

Upload your resume to let employers know you're open to Electrical Engineering job opportunities. Plus, receive relevant job recommendations in your inbox.

Electrical Engineering Jobs in Warner Robins, GA

Multi-INT Engineer, Senior Credence

Electrical Engineer (Engineer Electrical 2) - 28254 Company Confidential

Senior Electrical Engineer (PE) Johnson, Mirmiran & Thompson, Inc.

Senior Electrical Engineer Jobot

Senior Electrical Engineer - Simple Cycle - Forsyth, GA Oglethorpe Power Corporation

Electrical Engineer 2 - Suwanee, GA M.C. Dean, Inc

Electrical Engineer Senior Astrion

Electrical Engineer (PE) Johnson, Mirmiran & Thompson

Sr. Electrical Controls Engineer Intersources

Industrial Electrical Technical Designer III Clark Nexsen

Electrical Engineer CDM Smith

Industrial Electrical Technical Designer III Johnson, Mirmiran & Thompson

Electrical Engineer 3 - Suwanee, GA M.C. Dean, Inc

Electrical/Electronics Engineers Avion Solutions

Electrical Engineer (PE) Clark Nexsen

Electrical Engineer I Tyonek Native Corporation

Electrical Engineer II Tyonek Native Corporation

Electrical Field Services Engineer - Georgia Southern Company

Electrical Superintendent M.C. Dean, Inc

Electrician with Tekton Electrical Services, LLC Ladder

Journeyman Electrician with RBG Electrical Ladder

Engineering Test Technician Science and Engineering Services, LLC

ELECTRICAL AND INSTRUMENTATION TECH The Staffing People

Engineering Leader 1 M.C. Dean, Inc

Electrical Quality Control Supervisor M.C. Dean, Inc

Travel Electrical Superintendent 2 M.C. Dean, Inc

Electrical Crew Leader M.C. Dean, Inc

Electrical Foreman M.C. Dean, Inc

Electrical Subject Matter Expert Meta

Electrical Quality Control Inspector M.C. Dean, Inc

Area Schedule Lead - Data Center Design, Engineering and Construction Meta

Control Engineer 4 M.C. Dean, Inc

Control Engineer 3 M.C. Dean, Inc

Senior SIGINT System Engineer Bamboo Solutions

Power Electronics Hardware Engineer Nidec Motor Corporation

Project Engineer, Senior M.C. Dean, Inc

Senior Electronic Security Engineer - Atlanta, GA M.C. Dean, Inc

Staff Engineer 2 M.C. Dean, Inc

Operator- Engineer 1 (Distribution) LanceSoft Inc

Engineer 3 M.C. Dean, Inc

Senior Engineer III ASRC Federal Holding Company

Senior Engineer III ECS Limited

Power Engineer 3 - Suwanee, GA M.C. Dean, Inc

Commissioning Engineer, Staff M.C. Dean, Inc

Commissioning Engineer Associate M.C. Dean, Inc

Travel - Commissioning Engineer Manager - Atlanta, GA M.C. Dean, Inc

Computer Engineer Tyonek Native Corporation

Travel - Commissioning Field Engineer 4 - Atlanta, GA M.C. Dean, Inc

Control Engineer 2 - Onsite M.C. Dean, Inc

Resume Resources