27 Results for

Electrical Inspector Jobs in Kent, WA

Jobs

Bremerton, WA30+ days ago

Full-time
Employee

Typical duties include but are not limited to: Visually inspects crane components (e.g., hoists, chains, wire ropes, structural parts) and conducting operational tests (lifting, lowering, emergency stops). Tessera is a national non-profit, government contractor that is dedicated to "Creating Opportunities for People with Disabilities" through hiring and supporting individuals with disabilities and veterans with disabilities.

Bothell, WA30+ days ago

Full-time
Employee

Verathon is a global medical device company focused on supporting customers by being their trusted partner, delivering high-quality products that endure over time and ensure clinical and economic utility. The Quality Inspector is responsible for supporting the Quality and Operations teams by performing receiving inspection and final release of finished products.

Poulsbo, WA30+ days ago

Full-time
Employee

Reviews facility or system history utilizing history reports, discuss any current relevant issues with the building officer, reviewing computer/network generated work documents for any outstanding work, and determine contractual requirements for the facility. Typical duties include but are not limited to: Conduct routine inspections of buildings, equipment, and systems (e.g., HVAC, plumbing, electrical) to identify maintenance needs and possible safety hazards.

Algona, WA30+ days ago

Full-time
Employee

Position Summary: The Quality Inspector - Level 2 is an intermediate level inspector, with the ability to fully perform the role of Quality Inspector - Level 1 along with the ability to read and interpret complex blueprints and engineering documentation and apply an advanced knowledge of manual tools. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications.

Federal Way, WA30+ days ago

Full-time
Employee

Qualifications: 10-20 years of experience in inspection of structural; mechanical; electrical; and civil components within water and wastewater treatment plants and conveyance systems to include but not limited to new and renovation of concrete/masonry/steel structures; pumps; boilers; digester and propane gas systems; heat recovery system; building cranes; sliding gates; HVAC; Variable frequency drives; fans; process and cooling pipe systems; switchgears; transformers; UPS (Uninterruptible Power Supply) batteries; washer/classifier; grit system components and piping; fire alarm systems; and heaters. KJ is at the forefront of developing sustainable solutions for clients, including green infrastructure design, strategies to reduce energy use and environmental impacts, award-winning water reuse projects, and efficient construction management practices that ensure quality, safety, and on-time delivery.

Woodinville, WA30+ days ago

Full-time
Employee

PCC engineered product applications include all wing/fuselage structural parts; engine lock-plates/bracketry; complete passenger/exit doors; major flap support and actuation structures; spars, skins, and bulkheads; swaged control rods, cables, and actuation and flight control assemblies; and complex latches, quick release BALL-LOK pins, and specialized fasteners. Recent engineering projects include pylon struts, interior tie rods, hold open rods, flight control rods, wing-to-body fairing support rods, door mechanisms and rods, and structural support rods for Airbus, Boeing, Embraer, and Gulfstream.

East Port Orchard, WA30+ days ago

Full-time
Employee

The MIL Corporation (MIL) is a dynamic workforce of industry professionals who deliver world-class solutions in cyber, engineering, financial management, and information technology - and we are looking for candidates like you! 2017, 2020 - 2025 Top Workplace Award, South Carolina (Greenville Business Magazine, Columbia Business Monthly, and Charleston Business Magazine).

Woodinville, WA20 days ago

Full-time
Employee

To comply with those regulations, this position may require applicants to be U.S. Persons (i.e., U.S. citizens, U.S. lawful permanent residents, protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required export authorizations from the U.S. Department of State or the U.S. Department of. This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)).

Seattle, WA30+ days ago

$90,058–$148,162 Per Year
Full-time
Employee

Ability to wear personal protective equipment such as a respirator; meet physical demands of the position such as walking, standing, lifting up to 40 Lbs., climbing ladders, bending, squatting, and crawling in tight spaces to safely access work sites. The Inspector will work at a project field office in the Seattle/Bellevue area primarily on water, wastewater, and transit construction projects.

Fife, WA30+ days ago

Full-time
Employee

As an originator or peer reviewer of documents, ensures that production of drawings and specifications meets the scope, schedule, cost and quality requirements and satisfies federal, state, and local requirements and Gannett Fleming's Quality Management System. Understands client requirements as they relate to the electrical scope of work; aligns and develops detailed design documents including drawings, specifications, cost estimates, reports, and calculations.

Poulsbo, WA30+ days ago

Full-time
Employee

Tessera is seeking an Electrician, Maintenance who plans, estimates and performs a variety of electrical trade functions such as the installation, maintenance or repair of equipment for the generation, distribution or utilization of electric equipment and components. Replaces lamps and ballasts, cleans fixtures, repairs outlets, switches, connections, sensors, and ground fault interrupters, and performs miscellaneous electrical repairs.

Poulsbo, WA30+ days ago

Full-time
Employee

Tessera is seeking an Electrician, Maintenance- Licensed who plans, estimates and performs a variety of electrical trade functions such as the installation, maintenance or repair of equipment for the generation, distribution or utilization of electric equipment and components. Replaces lamps and ballasts, cleans fixtures, repairs outlets, switches, connections, sensors, and ground fault interrupters, and performs miscellaneous electrical repairs.

Redmond, WA30+ days ago

$25–$46.63 Per Hour

Preferred Additional Skills: + Possession of IPC certifications 610, 620, J-STD + Experience using Oracle MRP/ERP system + Experience using Dassualt Systemes Velocity MES + Attention to detail and the ability to analyze and interpret technical drawings and specifications + Intermediate understanding of GD&T + Proficiency in using precision measurement tools + Knowledge of aerospace manufacturing processes and materials + Attention to detail and accuracy in documentation + Ability to work in a fast-paced environment and meet deadlines + Strong problem-solving and ability to create manual approaches to measuring + Strong communication skills and the ability to work in a team environment In compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is $25.00 - $46.63. Please click here for the E-Verify Poster in English (https://www.e-verify.gov/sites/default/files/everify/posters/EVerifyParticipationPoster.pdf) or Spanish (https://www.e-verify.gov/sites/default/files/everify/posters/EVerifyParticipationPoster.pdf) .

Kirkland, WA10 days ago

$21.93–$29.67 Per Hour

They will complete the following job duties: + Perform inspection of manufacturing goods during the manufacturing process + Conducts dimensional and electrical inspection of sub-assemblies or final systems assemblies + Measure dimensions of products to verify conformance to specifications, using measuring instruments such as rulers, calipers, gauges, or micrometers + Interprets prints, manufacturing drawings, diagrams, wire cards and lists in approving or rejecting in-process or final assemblies + May perform in process inspections of rework items **MINIMUM REQUIREMENTS** **Education:** + High School Diploma or equivalent is required. + Demonstrates familiarity (typically 1-2 years of Production experience in the essential functions of the position) **Technical Skills:** + Basic computer skills, including email + Basic ERP skills + Basic Microsoft Office Suite + Ability to obtain J-Std and IPC certifications + May require flight critical certification **Physical Abilities:** + May be stationary for long periods of time + May lift up to 25 pounds + Near Vision - The ability to see details at close range (within a few feet of the observer) **Competenices:** + Problem Sensitivity - The ability to tell when something is wrong or is likely to go wrong.

Renton, Washington19 days ago

$35–$40

Essential Functions:Inspection: 60%Perform required technical inspections to receive or reject incoming material, airframes, aircraft components and to detect/report suspected unapproved parts. Perform in-process inspections for components in electrical backshops, manufacturing, composites, MRO and paint shop to judge the serviceability or rejection of manufactured parts, electrical components, and paint.

Woodinville, WA7 days ago

$27–$33 Per Hour

unassisted + Must be able to stand for extended periods - 8 hours min + Willingness to work all shifts, overtime, and weekends when needed to meet critical deadlines COMPENSATION AND BENEFITS: Pay range: Quality Inspector/Level 1: $27.00 - $33.00/hour Quality Inspector/Level 2: $31.00 - $39.00/hour Quality Inspector/Level 3: $36.00 - $45.00/hour ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Kent, WA30+ days ago

$26–$33 Per Hour

Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. The successful candidate is responsible for in person validation of the existing field design and layout of the telecommunications network to include aerial, buried and underground fiber network design and layout, underground conduit, handhole, building entrance, and riser facilities.

New!

Kent, WA4 days ago

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee** **Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.

Kent, WA13 days ago

As a Licensed Electrical Journeyman for DEAR Services, you will have the opportunity to work with your hands and have engaging conversations with clients while improving their lives. Work one-on-one with our residential clients to sell and install customized solutions that fit our clients' needs, wants, and budget while showing off your craftsmanship!

Fife, Washington25 days ago

$91,000–$125,000 Per Year

As an originator or peer reviewer of documents, ensures that production of drawings and specifications meets the scope, schedule, cost and quality requirements and satisfies federal, state, and local requirements and GFT's Quality Management System. Understands client requirements as they relate to the electrical scope of work; aligns and develops detailed design documents including drawings, specifications, cost estimates, reports, and calculations.

Fife, Washington25 days ago

$81,000–$100,000 Per Year

We measure our success by the strength of our relationships – that’s why we’re the employer of choice for 5,000+ of the industry’s brightest engineers, planners, architects, inspectors, designers, and more. At GFT, the electrical team is dedicated to creating efficient, innovative solutions for electrical systems, ensuring comfort and sustainability in every project.

Fife, Washington25 days ago

$120,000–$175,000 Per Year

Redmond, WA25 days ago

Contractor

Interprets prints, manufacturing drawings, diagrams, wire cards and lists in approving or rejecting in-process or final assemblies. The job is expected to follow detailed and defined rules / instructions and to make simple judgement in straightforward situations.

New!

Seattle, WA5 days ago

$29.52–$36.80 Per Hour

Req ID:** RQ212301 **Type of Requisition:** SCA **Clearance Level Must Be Able to Obtain:** None **Public Trust/Other Required:** None **Job Family:** SCA **Skills:** Confined Spaces,Electrical Systems,Mechanical Parts **Experience:** 1 + years of related experience **US Citizenship Required:** Yes **Job Description:** ELECTRICIAN MAINTENANCE GDIT is seeking a **Marine Electrician** to help support the **SACSS** program in Seattle, Washington **This is an onsite position, and no relocation assistance is provided.** **Must be a US Citizen** **Job Description:** + Repairs, installs, replaces, and tests electrical circuits, cables, equipment, and connectors. + Travel (within and outside of the continental United States) Maybe required for 20% of the time Required Certifications: Cableway Certified, Connertor Certified, Modular, COAX, Multi-Pin, Connector Fabricator and Inspector, Connector Trained and Qualified with 40 hours OJT.

Kent, Washington30+ days ago

$27.50–$41.25

Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. JOB SUMMARY:To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability.

Kent, Washington30+ days ago

$33.75–$50.67

New!

Camp Murray, WA4 days ago

Ensure you read this announcement in its entirety, complete all application requirements, and your USA Jobs profile name is accurate* Responsibilities A WG-2604-11, ELECTRONICS MECHANIC: Performs functional tests, analyzes performance and malfunctions, removes, installs, tests, maintains, modifies, performs alignments and troubleshoots the electronic, electrical, mechanical and hydraulic assemblies, modules, and interconnecting cables of a variety of combat and tactical equipment to include the M1 series main battle tank, M2/3 series Bradley fighting vehicle, Multiple Launch Rocket System (MLRS), TOW Missile System and the ATACMS Launch Loader Module (LLM). Summary This is a Washington Army National Guard Title 32 Excepted Service Unit Technician position: ELECTRONICS MECHANIC Location: Washington Combined Support Maintenance Shop G4-M JBLM, Washington 98433 Army National Guard Units Appointment Type: Permanent, excepted service Advertised as: ENLISTED/WARRANT OFFICER May be used to fill one or more vacancies.

Resume Resources

Free Resume Templates Free Resume Builder

Get noticed by top employers!

Upload your resume to let employers know you're open to Electrical Inspector job opportunities. Plus, receive relevant job recommendations in your inbox.

Electrical Inspector Jobs in Kent, WA

Jobs

Mechanic, Crane A (Mechanical Inspector)Skookum Educational Programs

Quality Inspector IIIVerathon, Inc.

Maintenance InspectorSkookum Educational Programs

Quality Inspector - Weekday Day Shift - AuburnPrimus International LLC

Senior Water and Wastewater Construction InspectorKennedy/Jenks Consultants

Quality Inspector 3 - AerospacePrimus International LLC

Shipboard Safety Inspector (Occupational Safety, Senior Analyst)The MIL Corporation

Quality Inspector - AviationPrimus International LLC

Construction InspectorDelve Underground

Electrical Project EngineerGannett Fleming, Inc.

Electrician, MaintenanceSkookum Educational Programs

Electrician, Maintenance - LicensedSkookum Educational Programs

Quality Inspector C - First ShiftL3Harris

Production Inspector, 2nd shift (Mon - Thurs 3:30 p.m. to 2:00 a.m.) (2026-059)Astronics

Aircraft Quality Inspector AAAA USA

Quality Inspector (Starlink Aviation)SpaceX

Outside Plant InspectorPearce Services

Inspector Power Plant Assembly - 50906The Boeing Company

Licensed Electrical JourneymanP.E.A.C.H. Teams

Electrical Project DesignerGFT.

Sr. Electrical DesignerGFT.

Sr. Electrical Project Manager/EngineerGFT.

Inspector II, Manufacturing Support - SkilledApidel Technologies

Marine ElectricianGeneral Dynamics Information Technology

Diesel Fleet Mechanic Technician IISysco

Diesel Fleet Mechanic Technician IIISysco

ELECTRONICS MECHANICArmy National Guard Units

Resume Resources