Test Supervisor Electrical VCS Electric Boat CorpTest Supervisor Electrical VCSCTBeing a Test Supervisor is a difficult and tasking job based on the volume of work, the technical knowledge required and the level of responsibility that goes along with keeping their tester directors safe in addition to testing and certifying a Nuclear Powered Submarine. Complete ownership over Steam & Electric Plant and Hull, Mechanical & Electrical Test Forms through daily review of data, partial closeout to Key Event, and final completion for certification.
Test Supervisor - Electrical - VCS General Dynamics Electric BoatTest Supervisor - Electrical - VCSGroton, ConnecticutFull timeBeing a Test Supervisor is a difficult and tasking job based on the volume of work, the technical knowledge required and the level of responsibility that goes along with keeping their tester directors safe in addition to testing and certifying a Nuclear Powered Submarine. Physical Qualifications: Climbing, Crawling, Kneeling, Light Lifting, Pulling, Pushing, Reaching, Stooping, Twisting Environmental Attributes: Cold, Dry, Dusty, Hot, Inside, Noise, Oily, Outside, Wet
Test Supervisor - Electrical - VCS General Dynamics CorpTest Supervisor - Electrical - VCSCTBeing a Test Supervisor is a difficult and tasking job based on the volume of work, the technical knowledge required and the level of responsibility that goes along with keeping their tester directors safe in addition to testing and certifying a Nuclear Powered Submarine. Complete ownership over Steam & Electric Plant and Hull, Mechanical & Electrical Test Forms through daily review of data, partial closeout to Key Event, and final completion for certification.
Manager, PX, GWE, Utilities Operations Lead Electrical Engineer Pfizer IncManager, PX, GWE, Utilities Operations Lead Electrical EngineerCT$99,200–$165,400 / yearThe multi-building campus is comprised of 2.3M SQFT supporting an occupancy of ~2,200 colleagues and contractors and has the greatest concentration of specialty operations in the R&D network consisting of small molecule clinical manufacturing, GxP and non-regulated laboratories, vivarium, technical space (central utility plant), and office workspace facilities. This position will provide technical leadership and operational engineering oversight for 24x7x365 electrical generation, distribution, and control systems supporting critical site utility infrastructure and systems within highly technical laboratory and manufacturing environments in support of the R&D operations at the Groton, CT site.
Senior Software Engineer - D425 Hull, Mechanical & Electrical Systems General Dynamics CorpSenior Software Engineer - D425 Hull, Mechanical & Electrical SystemsGroton, CTAs a Senior Software Engineer supporting HM&E systems, youll be part of an engineering team that designs, develops, integrates, and tests shipboard software for multiple submarine platforms. General Dynamics Electric Boat is a recognized leader in the design, construction and lifecycle support of submarines for the United States Navy.
STO Electrical Test - Virginia and Columbia Programs General Dynamics Electric BoatSTO Electrical Test - Virginia and Columbia ProgramsGroton, ConnecticutFull timeShipyard Test personnel are required to complete and maintain qualifications in the following areas: Training to perform electrical operational testing of all Steam and Electric Plant systems; Hull Mechanical and Auxiliary systems; and Weapons systems which may include going on sea trials. Perform watch standing duties to include: operate ship’s electrical systems; roving watches required for ship safety, or monitor electrical systems required as part of the construction which may include weekend work.
STO Electrical Test Virginia and Columbia Programs Electric Boat CorpSTO Electrical Test Virginia and Columbia ProgramsCTTraining and Qualifications: Shipyard Test personnel are required to complete and maintain qualifications in the following areas: Training to perform electrical operational testing of all Steam and Electric Plant systems; Hull Mechanical and Auxiliary systems; and Weapons systems which may include going on sea trials. Perform watch standing duties to include: operate ship's electrical systems; roving watches required for ship safety, or monitor electrical systems required as part of the construction which may include weekend work.
STO Electrical Test - Virginia and Columbia Programs General Dynamics CorpSTO Electrical Test - Virginia and Columbia ProgramsCTTraining and Qualifications: Shipyard Test personnel are required to complete and maintain qualifications in the following areas: Training to perform electrical operational testing of all Steam and Electric Plant systems; Hull Mechanical and Auxiliary systems; and Weapons systems which may include going on sea trials. Perform watch standing duties to include: operate ships electrical systems; roving watches required for ship safety, or monitor electrical systems required as part of the construction which may include weekend work.
Drafter Electrical & I&C Zachry Holdings, IncDrafter Electrical & I&CCTAbility to perform walk downs of equipment in an industrial plant environment, to include climbing ladders, working at heights, carrying equipment up to 50 pounds, accessing security-controlled areas, and entering confined spaces and controlled hazardous (e.g., high temperatures, high radiation) areas is required. Position Synopsis: Drafter, EIC will be relied upon to apply manual and computerized drafting methods with a working knowledge of the terms and procedures to prepare various electrical and control drawings including wiring diagrams, one-lines, and schematics to represent the electrical design.
Designer I Electrical and I&C Zachry Holdings, IncDesigner I Electrical and I&CCTAbility to perform walk downs of equipment in an industrial plant environment, to include climbing ladders, working at height, carrying equipment up to 50 pounds, accessing security-controlled areas, and entering confined spaces and controlled hazardous Z(e.g., high temperatures, high radiation) areas is required. Other Responsibilities: • Preparation of bills of material • Resolution of client comments • As-built drawing preparation • Reviewing manufacture's drawings and other discipline drawings • Communicating with the engineer and other disciplines to resolve any design problems • Advising, assisting, and occasionally directing drafting personnel in performance of their assigned duties.
Electrical Apprentices- SANTOR ELECTRICAL CONTRACTORS LLCElectrical Apprentices-Stonington, CTSantor Electrical Contractors, LLC is a locally owned and growing electrical contracting company providing high-quality services across residential, commercial, and industrial projects. Our team values professionalism, safety, and craftsmanship while helping apprentices grow into confident, skilled electricians.
Electrical Engineer Dept 427 Electric Boat CorpElectrical Engineer Dept 427CTOverview Propulsion Plant Electrical (D427) performs design engineering activities for electrical components and systems used in the propulsion plant for VIRGINIA Class submarines in construction at the Electric Boat shipyard and technology insertions for future VIRGINIA Class blocks of ships (e.g. Individual contributors of D427 work involves a mix of drawing support & reviews, supplier interaction, program management, NAVSEA directed task execution, and technical manual development.
Electrical Engineer - Dept 427 General Dynamics CorpElectrical Engineer - Dept 427CTOverview Propulsion Plant Electrical (D427) performs design engineering activities for electrical components and systems used in the propulsion plant for VIRGINIA Class submarines in construction at the Electric Boat shipyard and technology insertions for future VIRGINIA Class blocks of ships (e.g. Individual contributors of D427 work involves a mix of drawing support & reviews, supplier interaction, program management, NAVSEA directed task execution, and technical manual development.
Electrical Test Engineer - NNTL - Virginia Class 2nd & 3rd shift General Dynamics CorpElectrical Test Engineer - NNTL - Virginia Class 2nd & 3rd shiftCTShipyard Test Organization (D272) is seeking highly motivated candidates for our growing backshift to lead and instruct STO-Electrical Testers in the safe conduct of Virginia Class Steam and Electric Plant systems, Weapons, and Hull, Mechanical and Auxiliary systems which may include testing on Sea Trials. Preferred: Bachelor of Science in Electrical Engineering, Systems Engineering; other Engineering disciplines will be considered Naval Nuclear Propulsion Program Experience Current DOD Secret Clearance.
Electrical Systems Engineer General Dynamics CorpElectrical Systems EngineerCTDepartment 482 Electrical Systems Engineers will interface with: Electric Boat organizations: Other electrical system engineers (Electrical, Combat Weapons, and Waterfront Engineering) and designers for power distribution, instrumentation, monitoring and control systems, and communications. Department 482 Electrical Systems Engineers are expected to be: Highly motivated and initiative: Taking ownership of work, working independently, ability to multi-task and maintain organization, doing what is needed without being asked, following through.
Electrical Systems Engineer Electric Boat CorpElectrical Systems EngineerNew London, CTDepartment 482 Electrical Systems Engineers will interface with: Electric Boat organizations: Other electrical system engineers (Electrical, Combat Weapons, and Waterfront Engineering) and designers for power distribution, instrumentation, monitoring and control systems, and communications. Department 482 Electrical Systems Engineers are expected to be: Highly motivated and initiative: Taking ownership of work, working independently, ability to multi-task and maintain organization, doing what is needed without being asked, following through.
Electrical Maintenance Silgan Containers LLCElectrical MaintenanceCTSilgan endeavors to provide accommodations to individuals with disabilities to perform their essential job duties as long as the accommodation does not pose an undue hardship on the company's operations and does not pose a direct threat of substantial harm to the employee or others. MAJOR RESPONSIBILITIES: Responsibilities include, but are not limited to: Perform routine inspections, maintenance, and repairs on electrical systems, equipment, and machinery in compliance with safety, GMP, and housekeeping requirements.
Experienced Electrical Engineer General Dynamics CorpExperienced Electrical EngineerGroton, CTAt General Dynamics Electric Boat, you dont have to imagine it, you are a part of creating state of the art submarines that can operate and perform missions in the most extreme environments on Earth. General Dynamics Electric Boat is a recognized leader in the design, construction and lifecycle support of submarines for the United States Navy.
Experienced Electrical Test Engineer General Dynamics CorpExperienced Electrical Test EngineerGroton, CTAt General Dynamics Electric Boat, you dont have to imagine it, you are a part of creating state of the art submarines that can operate and perform missions in the most extreme environments on Earth. General Dynamics Electric Boat is a recognized leader in the design, construction and lifecycle support of submarines for the United States Navy.
Electrical Engineer - Dept 427 General Dynamics Electric BoatElectrical Engineer - Dept 427Groton, ConnecticutFull timeOverview: Propulsion Plant Electrical (D427) performs design engineering activities for electrical components and systems used in the propulsion plant for VIRGINIA Class submarines in construction at the Electric Boat shipyard and technology insertions for future VIRGINIA Class blocks of ships (e.g. Major components supported by this group are power electronic inverters and converters, power distribution switchboards and circuit breakers, microprocessor based instrumentation and control equipment, electromagnetic controllers, transformers, bus transfer devices and control stations.
Test Engineer Senior - Electrical General Dynamics Electric BoatTest Engineer Senior - ElectricalGroton, ConnecticutFull timeSuccessful candidates will be joining a strong and experienced engineering team in an exciting and fast-paced environment focused on designing power distribution, reactor plant, steam plant, and electric plant systems and equipment for the new COLUMBIA Class submarines. Ideal candidates for D429 possess a diverse knowledge of electrical engineering concepts, excellent written and verbal communication skills, and a strong drive to meet requirements on schedule and budget with a focus on achieving the highest quality.
Electrical Test Engineer - NNTL - Virginia Class 2nd & 3rd shift General Dynamics Electric BoatElectrical Test Engineer - NNTL - Virginia Class 2nd & 3rd shiftGroton, ConnecticutFull timeOverview: Shipyard Test Organization (D272) is seeking highly motivated candidates for our growing backshift to lead and instruct STO-Electrical Testers in the safe conduct of Virginia Class Steam and Electric Plant systems, Weapons, and Hull, Mechanical and Auxiliary systems which may include testing on Sea Trials. Physical Qualifications: Climbing, Color Vision, Crawling, Kneeling, Light Lifting, Medium Lifting, Pulling, Pushing, Reaching, Stooping, Twisting Environmental Attributes: Cold, Dry, Dusty, Hot, Inside, Noise, Oily, Outside, Wet
Engineer I/II - D425 Hull, Mechanical & Electrical Systems General Dynamics CorpEngineer I/II - D425 Hull, Mechanical & Electrical SystemsGroton, CTAs a software engineer supporting HM&E systems, youll be part of an engineering team that designs, develops, integrates, and tests shipboard software for multiple submarine platforms. General Dynamics Electric Boat is a recognized leader in the design, construction and lifecycle support of submarines for the United States Navy.
Electrical Software Shipboard Cybersecurity Engineer General Dynamics CorpElectrical Software Shipboard Cybersecurity EngineerGroton, CTControl System Security Engineers on our team typically perform the following types of work: Control system security analysis and design implementation, including the development of component specific requirements, working in close collaboration with component engineers. Design, implementation, operation and maintenance of sensitive unclassified and classified computing systems in accordance with appropriate Naval Reactors and Defense Counterintelligence Security Agency (DCSA) security policies.
Test Engineer Senior - Electrical General Dynamics CorpTest Engineer Senior - ElectricalCTSuccessful candidates will be joining a strong and experienced engineering team in an exciting and fast-paced environment focused on designing power distribution, reactor plant, steam plant, and electric plant systems and equipment for the new COLUMBIA Class submarines. Ideal candidates for D429 possess a diverse knowledge of electrical engineering concepts, excellent written and verbal communication skills, and a strong drive to meet requirements on schedule and budget with a focus on achieving the highest quality.
Test Engineer Senior Electrical Electric Boat CorpTest Engineer Senior ElectricalCTSuccessful candidates will be joining a strong and experienced engineering team in an exciting and fast-paced environment focused on designing power distribution, reactor plant, steam plant, and electric plant systems and equipment for the new COLUMBIA Class submarines. Ideal candidates for D429 possess a diverse knowledge of electrical engineering concepts, excellent written and verbal communication skills, and a strong drive to meet requirements on schedule and budget with a focus on achieving the highest quality.
NewEngineer II - Electrical 2nd Shift General Dynamics Electric BoatEngineer II - Electrical 2nd ShiftGroton, ConnecticutFull timeIn this role, engineers will provide comprehensive technical oversight of construction activities and will interface with Design and Engineering, Ship's Management, Planning, Operations, Supervisor of Shipbuilding (SUPSHIP), and PMS397 to act as the primary engineering interface for the Groton shipyard as the COLUMBIA Waterfront engineering organization grows. Physical Qualifications: Climbing, Crawling, Kneeling, Light Lifting, Reaching, Stooping, Twisting Environmental Attributes: Cold, Dry, Dusty, Hot, Inside, Noise, Outside, Wet
D489 MAIN PROPULSION CONTROL SYSTEM (MPC) – SYSTEMS ENGINEER (ELECTRICAL) (ENGINEER I/II) General Dynamics Electric BoatD489 MAIN PROPULSION CONTROL SYSTEM (MPC) – SYSTEMS ENGINEER (ELECTRICAL) (ENGINEER I/II)Groton, ConnecticutFull timeAdditionally, the team has a strong focus on driving the supplier schedule including oversight of design documentation, test procedures, and test reports to meet all applicable requirements while identifying deficiencies in the specification to apply lessons learned to future electric propulsion plant submarine topologies. The D489 MPC team responsibilities include MPC design development/redesign efforts, qualification testing, and analysis for all systems within the component including digital signal processors (DSPs), general purpose processors, control systems, etc.
Senior Electrical Engineer General Dynamics Electric BoatSenior Electrical EngineerGroton, ConnecticutFull timeOverview: Propulsion Plant Electrical (D427) performs design engineering activities for electrical components and systems used in the propulsion plant for VIRGINIA Class submarines in construction at the Electric Boat shipyard and technology insertions for future VIRGINIA Class blocks of ships (e.g. Major components supported by this group are power electronic inverters and converters, power distribution switchboards and circuit breakers, microprocessor based instrumentation and control equipment, electromagnetic controllers, transformers, bus transfer devices and control stations.
Electrical Systems Engineer General Dynamics Electric BoatElectrical Systems EngineerGroton, ConnecticutFull timeResponsibilities: Candidates best suited for this position will possess a passion for learning, teamwork, and being taught in the principles of electrical control systems, current control, and electric drives while assisting in the management of suppliers to deliver requirement compliant components for validation and use in the ship test program. Overview: The Integrated Power Systems Advanced Current Compensation team in (Department 489) supports new technology development for the electric drive propulsion control system.
Welding Machine Repair Electrical (Semi Skilled) Electric Boat CorpWelding Machine Repair Electrical (Semi Skilled)Groton, CTThe Welding Machine Repair - Electrical candidate will troubleshoot, repair, calibrate and operate various complex electronic welding equipment and Robotic welding and Plasma systems. Electric Boat is the premier designer and builder of nuclear powered submarines for the US Navy and we are experiencing a period of unprecedented growth!
D489 MAIN PROPULSION CONTROL SYSTEM (MPC) SYSTEMS ENGINEER (ELECTRICAL) (ENGINEER I/II) General Dynamics CorpD489 MAIN PROPULSION CONTROL SYSTEM (MPC) SYSTEMS ENGINEER (ELECTRICAL) (ENGINEER I/II)CTAdditionally, the team has a strong focus on driving the supplier schedule including oversight of design documentation, test procedures, and test reports to meet all applicable requirements while identifying deficiencies in the specification to apply lessons learned to future electric propulsion plant submarine topologies. The D489 MPC team responsibilities include MPC design development/redesign efforts, qualification testing, and analysis for all systems within the component including digital signal processors (DSPs), general purpose processors, control systems, etc.
D489 MAIN PROPULSION CONTROL SYSTEM (MPC) - SYSTEMS ENGINEER (ELECTRICAL) (ENGINEER I/II) Electric Boat CorpD489 MAIN PROPULSION CONTROL SYSTEM (MPC) - SYSTEMS ENGINEER (ELECTRICAL) (ENGINEER I/II)CTAdditionally, the team has a strong focus on driving the supplier schedule including oversight of design documentation, test procedures, and test reports to meet all applicable requirements while identifying deficiencies in the specification to apply lessons learned to future electric propulsion plant submarine topologies. The D489 MPC team responsibilities include MPC design development/redesign efforts, qualification testing, and analysis for all systems within the component including digital signal processors (DSPs), general purpose processors, control systems, etc.
Electrician Electrical Mechanic Vue Electric IncElectrician Electrical MechanicMATTITUCK, NYWe are seeking an Electrical Mechanic for a busy, bustling Electrician with work centered in Long Island's North Fork, South Fork, & Hamptons. You will be responsible for installing and repairing wiring, electrical fixtures, and control equipment, as well as training apprentices on the job.
Junior Electrician / Junior Electrical Mechanic Vue Electric IncJunior Electrician / Junior Electrical MechanicMATTITUCK, NYJob Summary: We are seeking Junior Electrical Mechanics for a busy, bustling Electrician with work centered in Long Island's North Fork, South Fork, & Hamptons. You will be responsible for assisting Senior Mechanic in installing and repairing wiring, electrical fixtures, and control equipment.
Electrical Test Supervisor - CLB General Dynamics Electric BoatElectrical Test Supervisor - CLBGroton, ConnecticutFull timePhysical Qualifications: Climbing, Color Vision, Crawling, Heavy Lifting, Kneeling, Light Lifting, Medium Lifting, Pulling, Pushing, Reaching, Stooping, Twisting Environmental Attributes: Acids or Alkalis, Cold, Dry, Dusty, Fumes, Hot, Inside, Noise, Oily, Outside, Wet Overview: The Shipyard Test Organization is seeking a highly motivated candidate for Electrical Test Supervisor for the Columbia Class.
Electrical Test Supervisor CLB Electric Boat CorpElectrical Test Supervisor CLBCTPreferred: Post High School education Demonstrated ability to coordinate complex projects in a team environment Experience leading people Naval nuclear experience Skills: Team interaction and communication. Qualifications Required: High School Diploma or GED 4+ years of relevant electrical or shipyard test experience or equivalent US Navy operational experience.
Electrical Test Supervisor - CLB General Dynamics CorpElectrical Test Supervisor - CLBCTMust be capable of taking effective disciplinary action in accordance with company policy and procedures and confer with Human Resources concerning employee problems and manner of resolutionComplete and maintain 6010, S&EP, and Work Controls Qualifications. The Shipyard Test Organization is seeking a highly motivated candidate for Electrical Test Supervisor for the Columbia Class.
NewAviation Electronics, Electrical & Computer Systems Technician U.S. NavyAviation Electronics, Electrical & Computer Systems TechnicianGreenport, NYWork Environment Assignments with squadrons at naval air stations and aboard aircraft carriers worldwide; work in hangars, avionics labs, and outdoors on flight lines in all weather conditions and high noise environments; close teamwork with other aviation ratings and aircrew in a structured maintenance organization; potential temporary duty with detachments and deployments supporting carrier or expeditionary operations. Additional qualifications for this job may include: United States citizenship and eligibility for a security clearance; normal color perception; interest in aviation and working around aircraft; strong aptitude in electronics, computers, and precision technical work; manual dexterity, good memory, and physical fitness sufficient to work safely on flight lines, in hangars, and on shipboard aircraft.
Senior Engineering Technician/Representative NDI ENGINEERING COMPANYSenior Engineering Technician/RepresentativeCTThe representative will provide guidance on the inspection, installation, repair, and maintenance of Hull, Mechanical, and Electrical (HM&E) Submarine Sail systems for SSN, SSBN, SSGN, and SSBN towed antenna class submarines. Roles and Responsibilities: Perform various inspections (Close Out, INSURV, Post Refit, Depot Availability In-Progress and Completion, etc.) and oversight of sail systems at the on-site location.
NewEngineering Technician Apogee Global RMSEngineering TechnicianGroton, CTApogee Global RMS is a veteran-led enterprise risk advisory consulting and talent solutions firm supporting federal agencies and defense organizations with highly specialized engineering, technical, and mission-critical workforce solutions. The successful candidate will work closely with U.S. Navy maintenance activities, shipyards, engineering teams, and government stakeholders to support inspection, maintenance, troubleshooting, installation, and system readiness.
C4I Electronic Engineering Technician Amentum Services IncC4I Electronic Engineering TechnicianCTFive (5) years of practical experience and High School diploma/GED OR Three (3) years practical experience and an Associate's Degree in Engineering Technology, math, or science; or Formal electronics training from: Technical School, or Class A or B military school in electronics or communications; or four-year electronics apprentice program. In accordance with the Health and Welfare provisions of the SCA, and in addition to your base hourly rate, you may be eligible to receive an additional health and welfare payment for each hour you work to ensure compliance with the minimums set forth by the act.
Sales & Service Technician (TEMP) Frontier Communications Parent IncSales & Service Technician (TEMP)CTMay be required to have experience in one or a combination of Equipment Technician, Special Services Technician, Telecommunications Technician, T&P Technician, Cable Splicer, Systems Technician, Network Maintainer, I&R Technician and Cable Technician. Duties include, but are not limited to, the following: Installs, removes, rearranges, programs, tests, troubleshoots and maintains voice, data, and ancillary equipment and network services.