NewElectronics Technician U.S. NavyElectronics TechnicianDobson, NCWhat to Expect Hands on technical work that blends classroom, computer based training, and intensive lab practice; frequent troubleshooting under time pressure to restore mission critical combat systems and communications; strict adherence to safety procedures, configuration control, technical documentation, and test routines; team based maintenance and watchstanding afloat and ashore, often on rotating shifts to support around the clock operations; progressive responsibility as you qualify on systems, earn Navy Enlisted Classifications, and advance in rate. Enlist under the Advanced Electronics and Computer Field program, with final placement into the Electronics Technician or Fire Controlman rating during initial training at Great Lakes, based on performance and Navy needs; maintain AECF eligibility throughout training in order to retain any accelerated advancement benefits; fleet conversion into ET or FC from another rating may be possible for qualified Sailors, subject to screening and community manning.
NewAviation Electronics Technician U.S. NavyAviation Electronics TechnicianKernersville, NCWork Environment Assignments with squadrons at naval air stations and aboard aircraft carriers worldwide; work in hangars, avionics labs, and outdoors on flight lines in all weather conditions and high noise environments; close teamwork with other aviation ratings and aircrew in a structured maintenance organization; potential temporary duty with detachments and deployments supporting carrier or expeditionary operations. Additional qualifications for this job may include: United States citizenship and eligibility for a security clearance; normal color perception; interest in aviation and working around aircraft; strong aptitude in electronics, computers, and precision technical work; manual dexterity, good memory, and physical fitness sufficient to work safely on flight lines, in hangars, and on shipboard aircraft.
NewAviation Electronics, Electrical & Computer Systems Technician U.S. NavyAviation Electronics, Electrical & Computer Systems TechnicianTrinity, NCWork Environment Assignments with squadrons at naval air stations and aboard aircraft carriers worldwide; work in hangars, avionics labs, and outdoors on flight lines in all weather conditions and high noise environments; close teamwork with other aviation ratings and aircrew in a structured maintenance organization; potential temporary duty with detachments and deployments supporting carrier or expeditionary operations. Additional qualifications for this job may include: United States citizenship and eligibility for a security clearance; normal color perception; interest in aviation and working around aircraft; strong aptitude in electronics, computers, and precision technical work; manual dexterity, good memory, and physical fitness sufficient to work safely on flight lines, in hangars, and on shipboard aircraft.
NewSenior Electronic Technician WestRockSenior Electronic TechnicianWinston-Salem, NC$42.43Guided by our values of safety, loyalty, integrity and respect, we are committed to delivering meaningful value for shareholders, customers, employees and the communities where we operate. This role is responsible for troubleshooting, repairing, and maintaining complex electrical and electronic systems in a fast-paced manufacturing environment.
NewAdvanced Electronics U.S. NavyAdvanced ElectronicsWinston Salem, NCWhat to Expect Hands on technical work that blends classroom, computer based training, and intensive lab practice; frequent troubleshooting under time pressure to restore mission critical combat systems and communications; strict adherence to safety procedures, configuration control, technical documentation, and test routines; team based maintenance and watchstanding afloat and ashore, often on rotating shifts to support around the clock operations; progressive responsibility as you qualify on systems, earn Navy Enlisted Classifications, and advance in rate. Enlist under the Advanced Electronics and Computer Field program, with final placement into the Electronics Technician or Fire Controlman rating during initial training at Great Lakes, based on performance and Navy needs; maintain AECF eligibility throughout training in order to retain any accelerated advancement benefits; fleet conversion into ET or FC from another rating may be possible for qualified Sailors, subject to screening and community manning.
NewComputer Field Technician U.S. NavyComputer Field TechnicianTroutman, NCWhat to Expect Hands on technical work that blends classroom, computer based training, and intensive lab practice; frequent troubleshooting under time pressure to restore mission critical combat systems and communications; strict adherence to safety procedures, configuration control, technical documentation, and test routines; team based maintenance and watchstanding afloat and ashore, often on rotating shifts to support around the clock operations; progressive responsibility as you qualify on systems, earn Navy Enlisted Classifications, and advance in rate. Enlist under the Advanced Electronics and Computer Field program, with final placement into the Electronics Technician or Fire Controlman rating during initial training at Great Lakes, based on performance and Navy needs; maintain AECF eligibility throughout training in order to retain any accelerated advancement benefits; fleet conversion into ET or FC from another rating may be possible for qualified Sailors, subject to screening and community manning.
NewFire Controlman U.S. NavyFire ControlmanJonesville, NCWhat to Expect Hands on technical work that blends classroom, computer based training, and intensive lab practice; frequent troubleshooting under time pressure to restore mission critical combat systems and communications; strict adherence to safety procedures, configuration control, technical documentation, and test routines; team based maintenance and watchstanding afloat and ashore, often on rotating shifts to support around the clock operations; progressive responsibility as you qualify on systems, earn Navy Enlisted Classifications, and advance in rate. Enlist under the Advanced Electronics and Computer Field program, with final placement into the Electronics Technician or Fire Controlman rating during initial training at Great Lakes, based on performance and Navy needs; maintain AECF eligibility throughout training in order to retain any accelerated advancement benefits; fleet conversion into ET or FC from another rating may be possible for qualified Sailors, subject to screening and community manning.
NewAviation Electrician’s Mate U.S. NavyAviation Electrician’s MateKernersville, NCWork Environment Assignments with squadrons at naval air stations and aboard aircraft carriers worldwide; work in hangars, avionics labs, and outdoors on flight lines in all weather conditions and high noise environments; close teamwork with other aviation ratings and aircrew in a structured maintenance organization; potential temporary duty with detachments and deployments supporting carrier or expeditionary operations. Additional qualifications for this job may include: United States citizenship and eligibility for a security clearance; normal color perception; interest in aviation and working around aircraft; strong aptitude in electronics, computers, and precision technical work; manual dexterity, good memory, and physical fitness sufficient to work safely on flight lines, in hangars, and on shipboard aircraft.
NewElectronics Technician I - Division 7 Department of TransportationElectronics Technician I - Division 7Guilford, North CarolinaSkills of this position include: general knowledge of the principles and practices applied in the safe and efficient use of tools, materials and test equipment used in electrical/electronic trade, ability to diagnose source of equipment failures, ability to repair/maintain a wide variety of complex electrical equipment. • Valid, current North Carolina driver’s license appropriate for the type of vehicle to be operated (Note: Employees permanently residing in adjacent states may operate a DOT vehicle using a current, valid, appropriate driver's license from their state of residence.).
Electronics Maintenance Technician 3form LLCElectronics Maintenance TechnicianKernersville, NCTechnician's responsibilities include diagnosing and repairing all manufacturing equipment in a glass factory, performing routine servicing and inspections, reading manuals, troubleshooting rotating equipment using PLC or multimeter. The ideal candidate will have strong electrical skills and good mechanical background, enjoy performing tasks with your hands and use a wide range of resources to solve machine operating problems.
Electronics Technician - $51.04*/hr Ardagh Group SAElectronics Technician - $51.04*/hrWinston-Salem, NCAnalyze all types of circuits, wiring, diagrams, networks and drawings as required to install, repair, adjust, calibrate, construct, modify, replace or service all types of electronic devices and systems, including communication systems, electronic gauges, controls and regulator power and distribution control equipment measuring recording processing and indicating devices. Make mechanical and electrical repairs as required in servicing electronic equipment including assembling modifying repairing and replacement of individual electronic parts within components circuit modules and printed circuit boards.
Electronics Maintenance Technician 3formElectronics Maintenance TechnicianKernersville, North CarolinaTechnician’s responsibilities include diagnosing and repairing all manufacturing equipment in a glass factory, performing routine servicing and inspections, reading manuals, troubleshooting rotating equipment using PLC or multimeter. The ideal candidate will have strong electrical skills and good mechanical background , enjoy performing tasks with your hands and use a wide range of resources to solve machine operating problems.
Electronics Technician Your Opportunity is Here with HSMElectronics TechnicianHigh Point, North CarolinaWith 25 locations across the U.S. and corporate headquarters in Hickory, NC and Huntersville, NC, we specialize in manufacturing components for furniture, bedding, transportation, packaging, automotive, and healthcare industries. HSM products from sofa springs to swimming pool noodles and bus seats, touch everyday life in countless ways.
Maintenance Technician Apidel TechnologiesMaintenance TechnicianStokesdale, NCAdvanced knowledge of one or more skilled maintenance disciplines such as: complex mechanical devices/systems, electrical controls, electronics, PLC programming and troubleshooting, sensors/sensing, etc. Ability to service and overhaul basic and some advanced components (air/hydraulic cylinders/motors, valve assemblies, pumps, motion elements, supporting sub-systems, etc.).
Maintenance Technician II British American Tobacco PlcMaintenance Technician IIWinston-Salem, NCAttend and participate in job related and management directed meetings, including meetings with equipment vendors and others related to equipment and/or processes used in the Primary or Tobacco Processing production areas. Your key responsibilities will include: Install, test, calibrate, repair, and modify various types of electrical/electronic controls for high speed cigarette manufacturing, tobacco processing and flexible manufacturing equipment.
Maintenance Technician NanoXploreMaintenance TechnicianStatesville, NCFull timeNanoXplore is strengthening its position as a world leader in graphene every day, whether through acquisitions, strategic partnerships or new manufacturing methods. The Maintenance Technician is responsible for coordinate the installation, repair and maintenance of facilities and machinery, directs and organizes all tasks related to maintenance.
NewIndustrial Maintenance Technician (Open Availability) TekniPlexIndustrial Maintenance Technician (Open Availability)Winston Salem, North CarolinaThe Maintenance Technician is responsible for installing, troubleshooting, repairing, modifying, maintaining and improving complex mechanical, electrical and electronic, instrumentation equipment and distribution systems, involving work of varied nature with minimum supervision. You will help protect the integrity of essential products, support patient safety and comfort, and contribute to innovations that make everyday life better, all while building a career that makes an impact.
Maintenance Technician TekniPlexMaintenance TechnicianWinston Salem, North CarolinaThe Maintenance Technician is responsible for installing, troubleshooting, repairing, modifying, maintaining and improving complex mechanical, electrical and electronic, instrumentation equipment and distribution systems, involving work of varied nature with minimum supervision. You will help protect the integrity of essential products, support patient safety and comfort, and contribute to innovations that make everyday life better, all while building a career that makes an impact.
Lead Field Service Technician - Gas Meter - Winston Salem, NC Honeywell International IncLead Field Service Technician - Gas Meter - Winston Salem, NCWinston Salem, NCHoneywell Industrial Automation Smart Energy business unit provides advanced metering infrastructure and energy management solutions that empower utilities and energy providers to optimize energy distribution, improve grid reliability, and support sustainability goals. As a trusted partner, we provide actionable solutions and innovation through our Aerospace Technologies, Building Automation, Energy and Sustainability Solutions, and Industrial Automation business segments - powered by our Honeywell Forge software - that help make the world smarter, safer and more sustainable.
Maintenance Technician, 1st Shift Owens CorningMaintenance Technician, 1st ShiftNCThe company operates with an integrated go-to-market strategy and a unique set of OC Advantages - including its iconic brand, unparalleled commercial strength, leading technology, and winning cost position - to help customers win and grow in the market. Owens Corning is a branded building products leader with three complementary market-leading businesses providing roofing, insulation, and doors primarily for residential markets in North America and Europe.
Maintenance Technician, 2nd Shift Owens CorningMaintenance Technician, 2nd ShiftNCAdvanced knowledge of one or more skilled maintenance disciplines such as: complex mechanical devices/systems, electrical controls, electronics, PLC programming and troubleshooting, sensors/sensing, etc. Ability to service and overhaul basic and some advanced components (air/hydraulic cylinders/motors, valve assemblies, pumps, motion elements, supporting sub-systems, etc.).
Test Technician Schneider Electric SETest TechnicianLexington, NC2-year Associates Degree in Power, Electronics, Computer Networking with 2-3 years relative experience; or 4 years of Military Training in Power, Electronics or Computer Networking. We ensure you feel secure with benefits that help you and your family thrive: medical (with member reward points), dental, vision, and basic life insurance, Benefit Bucks, flexible work arrangements, paid family leaves, well-being programs, 12 holidays per year, and 15 days of paid time off per year.
Master Fleet Technician City of Winston-Salem, NCMaster Fleet TechnicianWinston-Salem, NC$59,113–$75,351 / yearHigh school diploma/GED and seven years' experience in the repair of automotive equipment, or equivalent combination of experience and documented successful completion of training courses in automotive repair from a community college, vocational school, or automotive dealer/retailer (including significant training in electronics and computerized engine controls); refrigerant license, ASE certification in at least 4 areas or obtained within 12 months of start date, CDL B or obtain within 12 months of start date. Work may include as assigned: preventative maintenance and repair; inspecting and documenting repair/maintenance needs; updating vehicle maintenance records; performing quality control for vendor repairs; consulting technical references such as service and parts manuals for technical information; conducting state inspections; assisting with training for less experienced staff; and complying with safety rules and regulations.
Maintenance Technician II (3rd Shift / 10pm 6:30am) Herbalife LtdMaintenance Technician II (3rd Shift / 10pm 6:30am)Winston-Salem, NCTHE ROLE: The 3rd Shift Production Maintenance Technician II will perform scheduled and unscheduled maintenance, repair, preventative maintenance, and installation tasks both on the facilities, physical plant equipment, as well as production equipment, and machinery. As a key member, you will play a pivotal role in an extraordinary Maintenance Department, which promotes a culture of continuous learning, actively encouraging technicians to participate in our in-house RISE development program.
NewFlight Test Telemetry Technician HondaFlight Test Telemetry TechnicianWinston Salem, NCPull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly's, robotics reach equipment, people movers etc.), as required by job duties.#J-18808-Ljbffr. Equivalent work experience and training may be considered in lieu of a degree.5+ years Previous experience direct related work experiencePrevious Flight Test experience is preferred.
Facilities Maintenance Technician II (3rd Shift) Herbalife LtdFacilities Maintenance Technician II (3rd Shift)Winston-Salem, NCTHE ROLE: The 3rd shift Facilities Maintenance Technician II will perform scheduled and unscheduled maintenance, repair, preventative maintenance, and installation tasks both on the facilities, physical plant equipment, as well as production equipment, and machinery. As a key member, you will play a pivotal role in an extraordinary Maintenance Department, which promotes a culture of continuous learning, actively encouraging technicians to participate in our in-house RISE development program.
Maintenance Technician - Weekend Shift Masco CorpMaintenance Technician - Weekend ShiftWinston-Salem, NCE-Verify is an Internet based system operated by the Department of Homeland Security (DHS) in partnership with the Social Security Administration (SSA) that allows participating employers to electronically verify the employment eligibility of their newly hired employees in the United States. RESPONSIBILITIES: Conducts preventive maintenance on equipment throughout the facility in accordance with the PM schedule and troubleshoots and repairs facilities and equipment which may include conveyance systems, motive equipment, HVAC systems, fire protection systems, intrusion prevention systems, and more.
Biomedical Technician II Trimedx Holdings LLCBiomedical Technician IIWinston-Salem, NCAccordingly, Associates are prohibited from engaging in the unlawful manufacture, sale, distribution, dispensation, possession, or use of any controlled substance or marijuana, or otherwise being under the influence thereof, on all TRIMEDX and Customer property or during working/on-call hours. Performs Incoming Inspections (II) to maintain a complete and accurate inventory of medical devices, including trial and evaluation, rental, and loaner equipment in addition to permanently assigned equipment inventory.
Loom Maintenance Technician Steel Partners Holdings LPLoom Maintenance TechnicianStatesville, NCThe companys materials are found in a multitude of composite matrix applications including commercial aircraft interiors, radomes for commercial and military aircraft, ballistic applications for military vests and vehicles, as well as electronic applications including automobile sensors and telecommunication antenna. The Loom Maintenance Technician (LMT) is responsible for the overall condition and operation of the machines on their assigned team, maintaining their condition with the lowest possible supply cost and to produce a maximum quality of fabric at a minimum loss of efficiency.
Maintenance Technician $26.00 Crothall Laundry Services Inc.Maintenance Technician $26.00Winston-Salem, NCSummary: The Maintenance Technician is responsible for the safe completion of all scheduled daily task and non-scheduled task on his shift. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity.
Maintenance Technician $26.00 Core Linen ServicesMaintenance Technician $26.00Winston-Salem, NORTH CAROLINASummary: The Maintenance Technician is responsible for the safe completion of all scheduled daily task and non-scheduled task on his shift. Must be able to understand all safety procedures, which includes but not limited to lockout/tag out, confined space entry, and working on hot equipment c.
Field Service Representative/Technician StilesField Service Representative/TechnicianHigh Point, North CarolinaWith an extensive parts inventory, unique upgrade services, and a nationally accredited education and training program, Stiles builds solutions around our customers’ needs and supports them long after installation. Our innovative technologies and service-driven approach support customers in aerospace, transportation, alternative energy, architecture and structural elements, furniture, retail fixtures, and other manufacturing industries.
TECHNOLOGY SUPPORT TECHNICIAN I North Carolina Department of Public InstructionTECHNOLOGY SUPPORT TECHNICIAN ISalisbury, NCKnowledge, Skills, and Abilities Knowledge of: • MDM Solutions • Mac OS-iOS Devices • Windows OS • MS Office • Software Applications • LAN-WAN • Imaging Solutions • Mac and PC • Network Printers • Wireless AP • Scripting. Key Duties and Responsibilities Configures, repairs, maintains, and upgrades technology-related equipment including but not limited to: • Apple IOS and OSX devices • Windows imaging and mobile device management software.
Plug & Die Tooling Technician Chase Brass and Copper Co LLCPlug & Die Tooling TechnicianNCThe P&D Tooling Technician is responsible for the setup, programming, and operation of CNC and manual grinding equipment used to manufacture precision plugs, dies, and related tooling required for copper tube drawing operations. The Plug & Die Tech will be responsible for the setup, programming, and operation of CNC and manual grinding equipment used to manufacture precision plugs, dies, and related tooling required for copper tube drawing operations.
Behavior Technician - Guaranteed Hours Mosaic Pediatric TherapyBehavior Technician - Guaranteed HoursKernersville, North CarolinaNorth Carolina’s Premier ABA Therapy Provider for Children with Autism We are a values-driven company and are dedicated to providing world-class ABA therapy services to our early childhood clients while promoting a positive and supportive culture for our team members. We are a values-driven company and are dedicated to providing world-class ABA therapy services to our early childhood clients while promoting a positive and supportive culture for our team members.
Maintenance Technician Chase Brass and Copper Co LLCMaintenance TechnicianNCMaintenance Mechanic Responsibilities: Performs daily installation, maintenance, service, and repair of a wide variety of manufacturing systems including, hydraulic, pneumatic, and mechanical systems in accordance with diagrams, sketches, operation manuals, and manufacturers specifications, using various hand and power tools and precision-measuring and testing instruments of the maintenance trade. Maintains central supply systems, auxiliary systems, and chemical water treatment systems, using gauges and other test instruments to, disassemble, reassemble, replace, or repair system components.
Mobile Technician III Penske CorporationMobile Technician IIIStatesville, NCMajor Responsibilities: Demonstrate proficiency in the repair and diagnosis of: Engines (gas and diesel); Power train to include differentials, transmissions, clutches, drive shafts, PTO's and wheel ends; Electrical systems including starters and. maintenance (PM) service and to diagnose and repair the following with little or no supervision: Clutches, PTO Systems, Electric Systems, Hydraulic/Air Brake systems, Heating/Air Conditioning Systems, and Instruments and Gauges.
Maintenance Technician Clarios Global LPMaintenance TechnicianKernersville, NCMay be required to set up and operate one or all of the following machines: lathe, milling machine, drill press, grinder, power saws, etc. Perform mechanic skills including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting and repair of production machines.
Control Technician Unifi Manufacturing Inc.Control TechnicianYadkinville, NCPart timeA two-year associate's degree in Mechatronics Engineering Technology, or Electrical/Electronic Technology or equivalent is preferred, or significant comparable experience is required. We help major fashion, sports, homeware, and automotive brands make cutting-edge sustainable products.
Geek Squad Advanced Repair Technician Best BuyGeek Squad Advanced Repair TechnicianWinston-Salem, North CarolinaAs a Geek Squad Advanced Repair Technician (Agent), you'll work at our local Best Buy store to provide technology support and repair customers' computers and other devices. If you're passionate about technology and ready to leverage your technical abilities to help customers get the most out of their tech, this might be the perfect role for you.
NewManufacturing Automation Technician BiomericManufacturing Automation TechnicianWinston Salem, NCKnowledge, Skills, and AbilitiesAbility to read schematics and possess a good understanding of electronics, hydraulics, and strong troubleshooting skills. Perform and document scheduled preventive maintenance on all equipment inside and outside of the plant.
Maintenance Technician (Winston-Salem, NC, US, 27107) Corning IncMaintenance Technician (Winston-Salem, NC, US, 27107)Winston-Salem, NCThe purpose of Position: Minimize machine downtime, increase efficiency and reduce cost through planned maintenance and prompt response to unplanned maintenance requests on the production equipment used to produce fiber optic cables. Today, we accelerate and transform life sciences, mobile consumer electronics, optical communications, display, automotive, and solar markets.
Maintenance Technician 2nd shift Kewaunee Scientific CorpMaintenance Technician 2nd shiftStatesville, NCWhile performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl; and talk or hear. While under minimum supervision and guidance, responsibilities will include installing equipment, repairing and replacing units, preventative maintenance, and maintaining equipment, building, piping and electrical systems.
Maintenance Technician WielandMaintenance TechnicianPine Hall, North CarolinaPerforms daily installation, maintenance, service, and repair of a wide variety of manufacturing systems including, hydraulic, pneumatic, and mechanical systems in accordance with diagrams, sketches, operation manuals, and manufacturer's specifications, using various hand and power tools and precision-measuring and testing instruments of the maintenance trade. Maintains central supply systems, auxiliary systems, and chemical water treatment systems, using gauges and other test instruments to, disassemble, reassemble, replace, or repair system components.
Plug & Die Tooling Technician WielandPlug & Die Tooling TechnicianPine Hall, North CarolinaThe P&D Tooling Technician is responsible for the setup, programming, and operation of CNC and manual grinding equipment used to manufacture precision plugs, dies, and related tooling required for copper tube drawing operations. The Plug & Die Tech will be responsible for the setup, programming, and operation of CNC and manual grinding equipment used to manufacture precision plugs, dies, and related tooling required for copper tube drawing operations.
Biomedical Technician Fresenius Medical CareBiomedical TechnicianGuilford, North CarolinaWe have a Biomedical Technician specific career ladder with three potential levels of Biomedical Technician role as well as a leadership path from Area Technical Operations Manager, Regional Technical Operations Manager, and Senior Director Technical Services, overseen by a Vice President of Technical Services and supported by Corporate Biomedical Support Managers. • Performs initial and annual verification and ongoing monitoring of patient care staff’s technique for testing water system, assuring tests and documentation comply with manufacturer’s specifications for the devices and test equipment used.
Maintenance Technician ClariosMaintenance TechnicianKernersville, NCMay be required to set up and operate one or all of the following machines: lathe, milling machine, drill press, grinder, power saws, etc. Perform mechanic skills including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting and repair of production machines.
Manufacturing Automation Technician Biomerics LLCManufacturing Automation TechnicianWinston-Salem, NCUnsolicited resumes or candidate information submitted to Biomerics by search/recruiting agencies not already on Biomerics approved agency list shall become the property of Biomerics, and if Biomerics subsequently hire the candidate, Biomerics shall not owe any fee to the submitting agency. We deeply care about our team members and customers, and our team-oriented, customer-focused corporate culture places a premium on building strategic, mutually beneficial partnerships.
Transportation Worker I - Division 7 Department of TransportationTransportation Worker I - Division 7Guilford, North CarolinaValid, current North Carolina driver’s license appropriate for the type of vehicle to be operated (Note: Employees permanently residing in adjacent states may operate a DOT vehicle using a current, valid, appropriate driver's license from their state of residence.). It’s the mission of the NC Department of Transportation to connect people, products and places safely and efficiently with customer focus, accountability, and environmental sensitivity to enhance the economy and vitality of North Carolina.
Transportation Worker I - Division 9 State of North CarolinaTransportation Worker I - Division 9Davidson County, NC$32,287–$56,502 / yearValid, current North Carolina driver's license appropriate for the type of vehicle to be operated (Note: Employees permanently residing in adjacent states may operate a DOT vehicle using a current, valid, appropriate driver''s license from their state of residence.). Management prefers applicants with the following: Experience operating power tools such as chainsaw, weed eater, skill saw, drill, compactor, jackhammer, etc.