NewMaintenance Technician 3rd Shift StabilusMaintenance Technician 3rd ShiftGastonia, NCStabilus is a global leader in motion control solutions — gas springs, dampers, and electromechanical drives — with 8,000+ employees across 45 locations worldwide. \nCompany Description With a comprehensive application spectrum, a broad and unique product offer and decades of experience we are the world market leader for gas springs and dampers.
NewElectronics Technician I Six Flags Entertainment CorporationElectronics Technician ICharlotte, North CarolinaFull timeResponsibilities: Electronics Technicians install and maintain telephone systems, radio communication systems, communications lines, including the ride PA systems and speakers and wiring for park area sound, various digital and microprocessor controlled devices, video surveillance systems, and electronic shooting galleries, if any; repair, overhaul, troubleshoot, modify, fabricate, and test various types of electronic equipment and related devices, such as animatronic controls and park lighting systems; troubleshoot those systems and all electronic wiring circuits; take test readings; and use tools and common test instruments in the course of those tasks. Qualifications: Knowledge, Skills & Abilities: Basic knowledge of electronics installation and maintenance, including sound system installation and setup, lighting hanging, cable dressing, and animatronic controls.
Electronics Technician CarpenterElectronics TechnicianConover, North CarolinaExperience: Must have two to four years’ experience in the electronic field and a minimum of two years working in an industrial environment with extensive knowledge of computer systems and advanced electrical/electronics. Knowledge of programmable logic controllers, motor controls, and all types of machinery sensors and equipment to include PLC programming and trouble shooting.
NewElectronics Repair Technician Macpower Digital Assets Edge Private LimitedElectronics Repair TechnicianCharlotte, NC$20–$27 / hourKey Requirements: At least 6+ months of soldering experience on printed circuit boards (PCBs). Education: Associate degree in Electronics or equivalent certification/experience.
Electronics Lab Technician II Trane TechnologiesElectronics Lab Technician IIDavidson, North CarolinaThis technician plays a pivotal role in validating new products and electrical components including design and fabrication of controls simulators and test fixtures for Trane Technologies heating, ventilation, and air conditioning (HVAC) or transport products and their components. Execute electronics testing procedures for VFDs and motors developed by engineering teams, using programmable AC supplies, load systems, and measurement equipment such as oscilloscopes.
Electronics Technician U.S. NavyElectronics TechnicianCornelius, NCWhat to Expect Hands on technical work that blends classroom, computer based training, and intensive lab practice; frequent troubleshooting under time pressure to restore mission critical combat systems and communications; strict adherence to safety procedures, configuration control, technical documentation, and test routines; team based maintenance and watchstanding afloat and ashore, often on rotating shifts to support around the clock operations; progressive responsibility as you qualify on systems, earn Navy Enlisted Classifications, and advance in rate. Enlist under the Advanced Electronics and Computer Field program, with final placement into the Electronics Technician or Fire Controlman rating during initial training at Great Lakes, based on performance and Navy needs; maintain AECF eligibility throughout training in order to retain any accelerated advancement benefits; fleet conversion into ET or FC from another rating may be possible for qualified Sailors, subject to screening and community manning.
Aviation Electronics Technician U.S. NavyAviation Electronics TechnicianStanfield, NCWork Environment Assignments with squadrons at naval air stations and aboard aircraft carriers worldwide; work in hangars, avionics labs, and outdoors on flight lines in all weather conditions and high noise environments; close teamwork with other aviation ratings and aircrew in a structured maintenance organization; potential temporary duty with detachments and deployments supporting carrier or expeditionary operations. Additional qualifications for this job may include: United States citizenship and eligibility for a security clearance; normal color perception; interest in aviation and working around aircraft; strong aptitude in electronics, computers, and precision technical work; manual dexterity, good memory, and physical fitness sufficient to work safely on flight lines, in hangars, and on shipboard aircraft.
Aviation Electronics, Electrical & Computer Systems Technician U.S. NavyAviation Electronics, Electrical & Computer Systems TechnicianDallas, NCWork Environment Assignments with squadrons at naval air stations and aboard aircraft carriers worldwide; work in hangars, avionics labs, and outdoors on flight lines in all weather conditions and high noise environments; close teamwork with other aviation ratings and aircrew in a structured maintenance organization; potential temporary duty with detachments and deployments supporting carrier or expeditionary operations. Additional qualifications for this job may include: United States citizenship and eligibility for a security clearance; normal color perception; interest in aviation and working around aircraft; strong aptitude in electronics, computers, and precision technical work; manual dexterity, good memory, and physical fitness sufficient to work safely on flight lines, in hangars, and on shipboard aircraft.
Senior Power Electronics Validation Engineer Trane TechnologiesSenior Power Electronics Validation EngineerDavidson, North CarolinaWe are seeking a Senior Power Electronics Validation Engineer to join our Advanced Concepts and Capabilities Engineering team and play a key role in validating advanced power conversion technologies that enable high‑efficiency HVAC and climate-control systems. In this role, you will lead validation efforts for power electronic systems in an R&D environment —including inverters, converters, motor drives, and high‑voltage architectures—ensuring quality, reliability, safety, and performance across commercial and industrial applications.
Electronic Controls Technician Intertape PolymerElectronic Controls TechnicianMidland, NCElectronics TechnicianPosition Purpose:The ELECTRONICS TECHNICIAN is responsible for ensuring equipment is repaired in a safe, professional, prompt manner, minimizing downtime while maximizing the production of a quality product. Aid in training of new maintenance techniciansAct as a point of contact for outside vendors and contractors on services pertaining to electrical controls, software, PLCs/Drives, electronics upgrades etc.
Advanced Electronics U.S. NavyAdvanced ElectronicsHarrisburg, NCWhat to Expect Hands on technical work that blends classroom, computer based training, and intensive lab practice; frequent troubleshooting under time pressure to restore mission critical combat systems and communications; strict adherence to safety procedures, configuration control, technical documentation, and test routines; team based maintenance and watchstanding afloat and ashore, often on rotating shifts to support around the clock operations; progressive responsibility as you qualify on systems, earn Navy Enlisted Classifications, and advance in rate. Enlist under the Advanced Electronics and Computer Field program, with final placement into the Electronics Technician or Fire Controlman rating during initial training at Great Lakes, based on performance and Navy needs; maintain AECF eligibility throughout training in order to retain any accelerated advancement benefits; fleet conversion into ET or FC from another rating may be possible for qualified Sailors, subject to screening and community manning.
Security Installation Technician II Allied UniversalSecurity Installation Technician IICharlotte, North CarolinaFull timeMust possess a valid Driver’s License with at least one year of driving experience, a clean driving record (no major violations within last 36 months, no more than 1 accident in last 24 months, no more than one minor moving violation in last 24 months), a minimum level of insurance as required by Company policy, and the ability to safely operate a company issued vehicle. Install, program and configure electronic security systems for commercial clients, including, door access control, CCTV, intrusion detection, low voltage communication, electronic locks, point sensors, signaling devices, and other security systems.
NewCalibration Technician - Field (ETI) Accredited LabsCalibration Technician - Field (ETI)Huntersville, North CarolinaWe partner with established regional labs known for their deep community roots and long-standing customer trust and empower them with top-tier infrastructure and ISO/IEC 17025 accreditation. Calibrate, adjust, and troubleshoot problems with customers’ equipment, including electrical, mechanical, pressure, torque, environmental, dimensional, and radio frequency instrumentation.
Computer Field Technician U.S. NavyComputer Field TechnicianMaiden, NCWhat to Expect Hands on technical work that blends classroom, computer based training, and intensive lab practice; frequent troubleshooting under time pressure to restore mission critical combat systems and communications; strict adherence to safety procedures, configuration control, technical documentation, and test routines; team based maintenance and watchstanding afloat and ashore, often on rotating shifts to support around the clock operations; progressive responsibility as you qualify on systems, earn Navy Enlisted Classifications, and advance in rate. Enlist under the Advanced Electronics and Computer Field program, with final placement into the Electronics Technician or Fire Controlman rating during initial training at Great Lakes, based on performance and Navy needs; maintain AECF eligibility throughout training in order to retain any accelerated advancement benefits; fleet conversion into ET or FC from another rating may be possible for qualified Sailors, subject to screening and community manning.
Field Technician Adex CorporationField TechnicianCharlotte, NCEXPERIENCE and QUALIFICATIONS: " Vocational Skills and procedural knowledge, typically gained through a combination of education and relevant experience totaling up to 2 years post-high school or equivalent. Interpret the alarm conditions on the network to proactively identify and implement repairs and restoration plans to ensure minimal service disruption and impact to customer.
Electromechanical Maintenance Technician Prysmian GroupElectromechanical Maintenance TechnicianClaremont, North Carolina$28Summary of Position: The Electromechanical Maintenance Technician is responsible for safely providing for setup, installation, troubleshooting, repair and testing of complex mechanical/electrical equipment including automatic machines and process controls, motor control centers and related controls, computer control systems, some with human/machine interfaces, as well as basic plant electrical equipment; this includes preventive maintenance activities related to production and building equipment, machinery and components. Capable of performing low-to-high voltage electrical work, laying out and wiring complex circuits with large numbers of connections, troubleshooting and correcting faulty logic and control circuits, as well as carrying out installations, repairs and tests on virtually all production and plant equipment.
Senior Optical Inspection Technician Celgard, LLCSenior Optical Inspection TechnicianConcord, North CarolinaOur products are used in a broad range of energy storage and other barrier-type applications, including lithium-ion batteries, lithium primary and other specialty battery solutions, technical textiles such as waterproof breathable apparel and medical personal protective equipment (PPE) and other specialty applications. We are currently seeking applications to fill the following job opening at Celgard where we develop and manufacture membrane battery separators that are critical components used in lithium-ion batteries for electric drive vehicles (EDVs) and energy storage systems (ESS).
Senior Optical Inspection Technician Bionique Testing Laboratories LLCSenior Optical Inspection TechnicianConcord, North CarolinaOur products are used in a broad range of energy storage and other barrier-type applications, including lithium-ion batteries, lithium primary and other specialty battery solutions, technical textiles such as waterproof breathable apparel and medical personal protective equipment (PPE) and other specialty applications. We are currently seeking applications to fill the following job opening at Celgard where we develop and manufacture membrane battery separators that are critical components used in lithium-ion batteries for electric drive vehicles (EDVs) and energy storage systems (ESS).
Industrial Maintenance Technician PrysmianIndustrial Maintenance TechnicianClaremont, North CarolinaSummary of Position: The Electromechanical Maintenance Technician is responsible for safely providing for setup, installation, troubleshooting, repair and testing of complex mechanical/electrical equipment including automatic machines and process controls, motor control centers and related controls, computer control systems, some with human/machine interfaces, as well as basic plant electrical equipment; this includes preventive maintenance activities related to production and building equipment, machinery and components. Capable of performing low-to-high voltage electrical work, laying out and wiring complex circuits with large numbers of connections, troubleshooting and correcting faulty logic and control circuits, as well as carrying out installations, repairs and tests on virtually all production and plant equipment.
Multi Skilled Maintenance Technician Prysmian USAMulti Skilled Maintenance TechnicianClaremont, NC$28–$30 / hourThe Electromechanical Maintenance Technician is responsible for safely providing for setup, installation, troubleshooting, repair and testing of complex mechanical/electrical equipment including automatic machines and process controls, motor control centers and related controls, computer control systems, some with human/machine interfaces, as well as basic plant electrical equipment; this includes preventive maintenance activities related to production and building equipment, machinery and components. Capable of performing low-to-high voltage electrical work, laying out and wiring complex circuits with large numbers of connections, troubleshooting and correcting faulty logic and control circuits, as well as carrying out installations, repairs and tests on virtually all production and plant equipment.