66 Results for

Electronics Technician Jobs in Gloucester, MA

Jobs

BEVERLY, MA30+ days ago

Determination: Ready for any challenge, including crawling into small spaces and working in varying climates/weather conditions; this includes roofs and crawl spaces without the comfort of air-conditioning. Performance-based promotions include automatic 5% pay increases at Level 2 and 10% at Levels 3 and 4. Performance Incentives: Potential to earn up to $6,400 in your first year and $9,100 each following year through performance-based bonuses.

New!

Middleton, MAToday

$25–$28 Per Hour

Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. We serve a diverse client base across industries such as medical, electronics, telecommunications, and advanced manufacturing, partnering closely with customers to deliver precision components and sub-assemblies on time and to exact specifications.

New!

Wilmington, MAToday

$33.59–$45.27 Per Hour

or less Must be able to maneuver confined access areas, as small as 30” vertical x 45” horizontal Must be able to comfortably and routinely access rooftops with extension and/or fixed ladders at heights of 15’ to 20’, and occasionally, up to 50 feet This role may be exposed to variable weather conditions, moving mechanical parts, heights, risk of electrical shock, noisy operating equipment and other variable environmental conditions based on location Annual Base Salary Range or Hourly Base Pay Range: $33.59 - $45.27 Compensation Type: Hourly Incentive Eligible: No Sales Commisison Eligible: No Disclaimer : We strive to provide competitive compensation for this position, tailored to a variety of factors. EPA preferred Additional Requirements and Environmental Exposure: Must be able to safely and legally operate a vehicle using a seat belt Must be able to wear helmets, safety goggles, fall protection harness and safety boots to safely perform job duties Must be able to twist the trunk of your body 90 degrees in each direction Must be able to squat and touch the floor with both hands Must be able to reach your hands over your head Must be able to stand on concrete surfaces for extended periods, routinely up to 4 hours This position is highly physical and requires regular use of hands, fingers, walking, stooping, kneeling and climbing ladders.

New!

Billerica, MA6 days ago

$80,000–$140,000 Per Year
Full-time

Leading integrator of industrial automation solutions seeks individual with hands-on assembly, installation and maintenance expertise for automated cells looking to join a company providing excellent upwards mobility, internal training, exciting work, great pay, and fantastic benefits. Join team of experts working on projects including initial installation, preventative maintenance, emergency repairs, upgrades, and overhauls for automate work cells incorporating robot arms, attachments, and packaging machines.

Boston, Massachusetts30+ days ago

$57,500–$77,500 Per Year

Minimum 3 years of hands-on experience working with electronics including oscilloscopes, digital multimeters (DMMs), function generators, and other related equipment preferred. Electronics Technicians work in a hands-on environment as members of cross-functional engineering teams – supporting the development of new products.

New!

Lawrence, MA2 days ago

Training includes basic Navy schooling, followed by specialized technical instruction, with potential further qualification in micro miniature repair and flight operations. Work involves hands-on maintenance on flight lines, in hangars, and aboard ships, often under time pressure and in various weather conditions.

Stratham, NH28 days ago

$90,000–$110,000 Per Year

This Manufacturing Engineer will support machining and manufacturing operations by developing, evaluating, and improving production processes in a low-volume, high-mix environment. Our client designs and manufactures high-reliability electronic components and systems used in extreme, high-stakes environments.

New!

Cambridge, MA6 days ago

$119,355–$155,164 Per Year

Specialized experience for this position would include significant experience in general electrical engineering, experience supporting architecting system level electrical designs using both commercial and custom electronics, and supporting project design reviews and participating in other projects’ reviews. Expert knowledge of the concepts, principles and practices of electrical engineering, in order to investigate, design, and provide consultative services to the development of a range of electronics for ground-based and space-borne instrumentation for astrophysical data collection, as well as its associated test, calibration and ground support equipment.

New!

Cambridge, MA6 days ago

$141,041–$183,353 Per Year

Knowledge, Skills, and Abilities required:Mastery of advanced concepts, principles and practices of electronics engineering, in order to investigate, design, and provide consultative services to the development of an entire range of electronics for ground based and space-borne instrumentation for astrophysical data collection, as well as its associated test, calibration and ground support equipment. Makes both oral and written presentations to project scientists and technical representatives of contracting agencies and cooperating or affiliated organizations: Either singly or in collaboration with project scientists and other engineers, may write technical papers recording innovative design techniques and criteria, and present papers to technical symposia in the specialty field.6.

Stratham, NH28 days ago

$90,000–$110,000 Per Year
Full-time

This Manufacturing Engineer will support machining and manufacturing operations by developing, evaluating, and improving production processes in a low-volume, high-mix environment. Client Details Our client designs and manufactures high-reliability electronic components and systems used in extreme, high-stakes environments.

Waltham, MA7 days ago

Operate computer-controlled test platforms, configure test parameters, execute semi-automated test sequences, and extract/analyze data using command-line scripts in Linux-based environments. By promoting inclusion with the same enthusiasm, we devote to quality and competency, and using the experience from a diverse assortment of backgrounds and experiences, Canon is able to improve the services and value we deliver to clients, employees, and customers.

Medford, MA30+ days ago

Someone in this position at TRUNO will: Respond to all service requests timely, keep customer fully updated, and ensure service call completions are documented accurately with comprehensive details, as well as ensure any parts/equipment used are appropriately accounted for. Overall responsibility includes ensuring customer needs for any POS hardware, as well as additional hardware, issues that are reported are responded to, and the appropriate troubleshooting, diagnostics, repair, and thorough testing are completed.

Wilmington, Massachusetts29 days ago

$38–$42 Per Hour

Must possess a valid Driver’s License with at least one year of driving experience, a clean driving record (no major violations within last 36 months, no more than 1 accident in last 24 months, no more than one minor moving violation in last 24 months), a minimum level of insurance as required by Company policy, and the ability to safely operate a vehicle required. Install, program and configure commercial electronic security systems for enterprise commercial clients (door access control, CCTV, intrusion detection, low voltage communication, electronic locks, point sensors, signaling devices, ect.).

New!

Waltham, MA5 days ago

This role requires hands-on expertise in fiber-laser architecture, strong problem-solving skills, and experience working closely with a dynamic team to ensure high performance, repeatability, and scalability in manufacturing. Conduct optical and electrical testing of fiber laser modules using instruments such as optical spectrum analyzers, power meters, oscilloscopes, and beam profilers.

MELROSE, Massachusetts30+ days ago

Qualifications & Requirements: Minimum Education Requirement - Associate's Degree (or equivalent experience) in electronic, biomedical engineering or a discipline geared toward managing maintaining and repairing clinical equipment within a healthcare environment and/or equivalent of military BMET program and/or AAMI certified . Sodexo’s growing Healthcare Technology Management (HTM) Division is seeking a Biomedical Equipment Technician 1 to support Healthcare Technology Management services at Melrose Wakefield Hospital located in Melrose, MA.

New!

Gloucester, MA5 days ago

$23.40–$26.36 Per Hour

Responsibilities:Performs routine to moderately complex electro-mechanical technical functions and activities such as design, test, checkout, fabrication, modification, troubleshooting and assembly of electronics and electro-mechanical systems, experimental design circuitry, prototype models, specialized test equipment, tools and test fixtures. Works from schematics, diagrams, written and verbal descriptions, layouts or plans to perform routine testing and troubleshooting.

Danvers, MA30+ days ago

$32–$33 Per Hour

Electronics experience (Important), RF experience, Use of Bird meters/ multimeters (Important), Use of programable power supplies (Important), Troubleshooting experience , Circuit board experience (DSP boards). Operate, inspect and test lab electro/mechanical equipment such as multi-meters, oscilloscopes, spectrum analyzers, and other testing devices.

Salem, NH30+ days ago

Examples include knowledge of Surface Mount Technology (SMT), reflow soldering, thru-hole soldering, PCB assembly and electronics systems assembly processes. Education and Experience: Mechanical Manufacturing TechnicianHigh School diploma / GED / Vocational Technical Education is required.

Boston, MASSACHUSETTS11 days ago

We specialize in integrating systems, providing energy-efficient equipment and services, and supporting sustainability through innovative technologies like renewable natural gas conversion and energy storage solutions. The Building Automation Technician (Integration Specialist) IV serves as an advanced-level technical expert responsible for leading the integration of advanced building automation system (BAS) projects.

Boston, MA30+ days ago

This position requires the incumbent to work in an environment where there may regular exposure to the following: General M-F with occasional weekend activity, hours are dependent upon the project and site access and often extend beyond the normal workday. The Field Installation Technician will beresponsible for performing field service, including installation and onsite service support, on Planar hardware and software products.

Boston, Massachusetts30+ days ago

Network with integration technicians, building owners, building managers, and Electrical contractors to address any technical issues with lighting control integration, and function. • Provide commissioning and superior field technical support for all control components to ensure proper functionality per project design and specifications.

Tewksbury, MA24 days ago

$60,000–$78,000 Per Year

While performing the duties of this job, the employee is frequently required to stand; walk; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; stoop, kneel or crouch; and talk or hear. The Manufacturing Engineering Test Technician is responsible for supporting the Manufacturing Engineering Department and Production for product test and initial power-up and will assist in development of process improvements.

Boston, MA27 days ago

$21.63–$25 Per Hour

We provide more supply and equipment options than any other full-service distributor, an offering enhanced by a comprehensive suite of services, including office design, equipment repair, practice coaching, financing and project management, wealth management and dental-specific technology solutions. Benco Dental, the largest privately owned, full-service dental distributor in the United States, has remained in the family since 1930—a family that now includes our more than 40,000 customers and over 1,500 associates in the 48 contiguous states.

Tewksbury, MA24 days ago

$25–$28 Per Hour

While performing the duties of this job, the employee is frequently required to stand; walk; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; stoop, kneel or crouch; and talk or hear. In this role, the Manufacturing Technician III will be able to work with other technicians as well as mechanical, electrical, and software engineers on a variety of electro-mechanical, optical and robotic projects.

Watertown, MA30 days ago

Full-time

You will play a key role in assembling high-quality electronic components that ensure product reliability and performance. Perform hand soldering of electronic components, including through-hole and surface-mount (SMT) parts.

Salem, NH30+ days ago

Tasks will include daily checks of equipment to ensure all manufacturing equipment and processes are functioning and maintained properly, working with other production and engineering personnel and vendors to resolve issues quickly and effectively. Diagnose malfunctioning systems using test equipment and hand tools, to locate the cause and correct the problem.

New!

Salem, NH2 days ago

The Mechanical Manufacturing Technician supports electronics assembly by troubleshooting and repairing equipment, performing preventive maintenance, and maintaining inventory of spare parts. Candidates should have 2-3 years of experience in electronics assembly equipment maintenance, strong electrical/mechanical skills, troubleshooting ability, and good communication skills.

New!

Salem, NH2 days ago

Essential skills include strong electrical/mechanical aptitude, troubleshooting, schematic reading, initiative, problem-solving, good documentation, computer skills, and effective communication. The Mechanical Manufacturing Technician supports electronics assembly manufacturing by troubleshooting and repairing equipment, performing preventive maintenance, and maintaining spare parts inventory.

Exeter, NH30+ days ago

Full-time

Repairs consist of roadside emergency repairs, and minor to major repairs to diesel engine vehicles. Managers oversee Road Service Technicians, which includes but is not limited to Scheduling, Interpersonal issues, and training.

Exeter, NH30+ days ago

Full-time

The Truck Build Technician at New England Truck Center - New England Wrecker Sales, will work collaboratively to fabricate, weld, and assemble truck parts and components by pre-design build layouts and custom layouts. This role requires a comprehensive understanding of truck components and repair, including routine servicing to computer-aided diagnostics, vehicle electronics, and air brake and hydraulic repairs.

Boston, Massachusetts8 days ago

Services the client via the helix ticketing system and responds to the AV Support Hotline ("The Hotline") Communicates status of pending issues to the client and assists in minor repairs to AV equipment throughout the MFS footprint. Provides full support for meetings and event type functions held on premises in the Multi-Purpose meeting rooms and café areas (setting up tables and chairs per client’s direction and needs).

Boston, Massachusetts12 days ago

The Onsite Support Technician will work in partnership with the customer, management team, global helpdesk, and SIG teams to provide on premises support for AVI-SPL customers at customer site(s) with the end goals of delivering a world-class Customer Service experience. AVI-SPL is a digital enablement solutions provider who transforms how people and technology connect to elevate experiences, create new value, and enable organizations to thrive and grow.

Braintree, Massachusetts30+ days ago

$19–$20.83

NCR Voyix is dedicated to building a diverse community, one where employees feel a sense of belonging, are valued for their contributions, and the perspectives they bring. Willing to be trained on and operate small scale scissor lifts in retail environments to service or replace networking equipment such as access points or switches.

Chelsea, MA8 days ago

$40–$60 Per Hour

Well over 100 years later, we are the largest meat processor in New England and still pushing our craft to the next level – tweaking recipes to have the perfect flavors and extending our expertise into delicious new areas and collaborations – such as Kayem’s Night Shift Brewing Small Batch Beer Brats. SUMMARY: The Controls Technician is responsible for installing, maintaining, troubleshooting, and repairing automated control systems, electrical systems, and industrial equipment to ensure uninterrupted plant operations.

Boston, MA30+ days ago

Full-time

Mentor Technical Group es un empleador que ofrece igualdad de oportunidades y todos los solicitantes calificados recibirán consideración para el empleo sin importar raza, color, religión, sexo, orientación sexual, identidad de género, información genética, origen nacional, estado de veterano protegido, estado de discapacidad o cualquier otro grupo protegido por ley. He / she may frequently work inside weather conditions, near moving mechanical parts, exposed to wet and or humid conditions, and an odorous atmosphere, may be exposed to fumes and the risk of electrical shock, and occasionally work on ladders in high places, in small spaces, such as lift/metering stations, manholes, tanks and wet wells.

New!

Haverhill, MA5 days ago

This role involves wiring and assembling control panels, interpreting electrical schematics, and ensuring compliance with electrical codes. The ideal candidate is hands-on, mechanically capable, and experienced with electrical wiring—not electronics.

Woburn, MA17 days ago

Role Overview: The Field Installation & Service Technician will execute installations and testing for simple to complex vehicle systems, including upgrading equipment (software, hardware, and telecommunications network components). Company Information: RL Controls, LLC (RLC) is an ISO-certified systems integrator supporting the diverse technical needs of the mass transportation industry.

Boston, Massachusetts15 days ago

They come to BLM GROUP USA for our expertise, deep network and nearly sixty years of experience in the industries we serve, and to partner with diverse teams of passionate, enterprising BLMers, dedicated to an inclusive approach to helping them grow and succeed at every stage of their business. Under direct supervision of the Service Manager, the Field Service Technician will perform new equipment installations, preventive maintenance, troubleshooting, and emergency repair of BLM equipment at the customer site.

Burlington, Massachusetts20 days ago

As a Geek Squad Advanced Repair Technician (Agent), you'll work at our local Best Buy store to provide technology support and repair customers' computers and other devices. If you're passionate about technology and ready to leverage your technical abilities to help customers get the most out of their tech, this might be the perfect role for you.

Saugus, Massachusetts18 days ago

As a Geek Squad Senior Repair Technician (Agent), you'll lend your tech expertise and leadership ability to overseeing technology support at a Best Buy store. What you'll doAssist other Geek Squad leaders with assigning staff to customer service, device diagnosis, repair, service and follow-up.

Waltham, Massachusetts30+ days ago

$36.30–$50.54 Per Hour

These repairs may require working hours in addition to the normal work schedule for emergency calls or routine service as required. Technicians are responsible for the diagnosis, repair, reconditioning, overhaul and maintenance of customer and company heavy equipment and components.

Boston, Massachusetts30+ days ago

General office conditions; field work is performed outdoors with loud noise levels and exposure to variable weather conditions/hazards associated with heavy equipment and construction sites; the workload is subject to seasonal and weather-related fluctuations; responds to emergencies. Skill: Strong interpersonal skills; excellent written and verbal communication skills; proficient computer skills including MS Office applications and specialized software; skills in operating the above listed tools and equipment.

New!

Boston, MAToday

It is also the largest machine tool distribution company in the eastern half of the United States, and the exclusive source for Tsugami Precision CNC Lathes, Vertical Machining Centers, Horizontal Machining Centers and Multi-tasking machines in North America. Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufacturers of precision machined parts in the United States.

New!

Waltham, MA6 days ago

$35–$44 Per Hour
Contractor

Operate computercontrolled test platforms by configuring test parameters, executing semiautomated test sequences, and extracting/analyzing data using commandline scripts in Linuxbased environments. You will collaborate closely with engineers to execute complex product testing, maintain robust documentation, and help transition cuttingedge technologies from concept to reality.

Canton, Massachusetts30+ days ago

$25.88–$38.10 Per Hour

New!

Gloucester, MA5 days ago

$30–$35 Per Hour

As an Engineering Technician, you will play a critical role in supporting production, engineering, and new product introductions by performing a wide range of electro-mechanical tasks, including: Perform routine to moderately complexelectro-mechanical functionssuch as design support, testing, checkout, fabrication, modification, troubleshooting, and assembly. If you’re adriven Engineering Technician with semiconductor experiencewho enjoys solving complex problems and working directly on high-tech equipment, we’d love to hear from you.

Quincy, MA22 days ago

The program begins with 5 weeks of on-site training in Syracuse, followed by continued field training alongside experienced technicians, preparing participants for a full-time Field Service Technician role upon completion. TechPath trainees are expected to fully participate in on-site training, engage in on-the-job learning, demonstrate reliability, and show a commitment to building a long-term career in the field.

Cambridge, MA30+ days ago

Full-time

Physical requirements: Role involves physical activity, including walking, standing, driving, sitting, squatting, kneeling, reaching overhead, bending, twisting, and turning for the better part of an 8-hour workday. Physical capability to undertake tasks requiring walking, standing, driving, sitting, squatting, kneeling, reaching, bending, twisting, and turning for up to 8 hours.

Waltham, MA27 days ago

$43–$47 Per Hour

With headquarters in Norwood and Waltham, Massachusetts, and a global team of nearly 2,000 employees, we’re building a collaborative, empowered culture grounded in shared values: Customer Centricity, Ingenuity, Ownership & Accountability, Collaboration, and Integrity. Nova Biomedical is proud to be a global leader in osmolality testing and biotechnology and in vitro diagnostic (IVD) instrumentation, dedicated to advancing patient care and scientific discovery with a legacy that continues to shape the future of life sciences.

New!

Chelsea, MA6 days ago

$68,215.41–$92,162.32 Per Week

Basic reading, writing, mathematical and oral communication skills as normally attained through a high school education or equivalent required; Associate's degree in civil engineering or related field preferred; and. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, feel or operate objects, tools, or controls and reach with hands and arms.

Resume Resources

Free Resume Templates Free Resume Builder

Get noticed by top employers!

Upload your resume to let employers know you're open to Electronics Technician job opportunities. Plus, receive relevant job recommendations in your inbox.

Electronics Technician Jobs in Gloucester, MA

Installation Technician - Drivers Wanted DISH

CNC Machinist Jobot

HVAC Controls Technician - Wilmington, MA Trane Technologies

Robotics Technician Diedre Moire Corp.

Electronics Technician Lutron Electronics Co., Inc

Aviation Electronics, Electrical & Computer Systems Technician US Navy

Manufacturing Engineer - Electronics - Stratham, NH Michael Page

Electronics Engineer, IS-855-13 Smithsonian Astrophysical Observatory

Electronics Engineer, IS-0855-14 Smithsonian Astrophysical Observatory

Manufacturing Engineer - Electronics - Stratham, NH Michael Page International

R&D Systems Engineering Technician Canon Recruiting Group

Field Service Technician Truno

Security Installation Technician II Allied Universal

Fiber Laser Technician John Galt Staffing

Biomedical Equipment Technician 1 Sodexo

Eng - Engineering Technician – Intermediate Iconma

Test Technician III (Temp-To-Perm) Connexion Systems + Engineering

Mechanical Manufacturing Technician Apollo Professional Solutions

Building Automation Technician- IV Stark Tech Group

Field Installation Technician - New York City/Boston, MA Planar Systems

Field Startup Technician OOJ - 32860 Hatch Global Search

Manufacturing Engineering Test Technician Mycronic USA

Field Service/Installation Technician Benco Dental

Manufacturing Technician III Mycronic USA

Soldering Technician TALENIQUE INC

Electrical Technician Apollo Professional Solutions

Equipment Technician - Manufacturing SynQor

Manufacturing Technician - Hiring Now SynQor

Road Service Technician NETC Fleet Services

Truck Build Technician - New England Wrecker Sales NETC Fleet Services

Onsite AV Support Technician AVI-SPL

Onsite Support Technician AVI-SPL

Field Service Technician I NCR Voyix

Maintenance Control Technician Kayem Foods

Instrumentation/Calibration Technician Mentor Technical Group

Electrical Control Panel Wire Technician Micro Tech

Field Service Technician - Transit Systems RL Controls

Field Service Technician BLM Group

Geek Squad Advanced Repair Technician Best Buy

Geek Squad Senior Repair Technician Best Buy

Diesel Mechanic / In-Field Service Technician Milton CAT

Junior Engineering Technician Boston Water and Sewer Commission

CNC Field Service Technician - Trainee Tsugami Machining - America

R&D Systems Engineering Technician Integrated Resources, Inc

Field Service Technician - Canton, MA Rivian

Engineering Technician L3Harris

Field Service Technician Trainee (Power Generation Equipment) Kinsley Group

Field Service Technician Joe Warren & Sons Co., Inc.

Engineering Technician, Group Lead Nova Biomedical

Senior Field Service Technician Massachusetts Water Resources Authority

Resume Resources