NewManager, Platform Engineering CargillManager, Platform EngineeringPorterdale, GA$120,000–$160,000In-depth knowledge of addressing the unique security challenges of Large Language Models (LLMs), Generative AI, or Agentic AI systems, including model misuse, prompt injection, hallucination risk, and data governance. Collaborate with AI platform engineers, cloud engineers, software engineers and other key stakeholders to create security solutions aligning to industry’s best practices while fostering trusted relationships.
Construction Materials Testing (CMT) Engineering Technician IV Terracon Consultants IncConstruction Materials Testing (CMT) Engineering Technician IVAthens, GAAmerican Welding Society (AWS) Senior Certified Welding Inspector (SCWI)American Society for Nondestructive Testing (ASNT) Level III certification in one or more of the following areas: Visual Testing (VT), Magnetic Particle Testing (MT), Dye Penetrant Testing (PT), Radiographic Testing (RT), Ultrasonic Testing (UT).Other national, regional, state, and local Materials related certifications requiring experience and written examination will also be considered if deemed appropriate by the Terracon Department Manager. NICET Level III certification in Geotechnical in two or more of the following categories: Construction, Laboratory, Exploration, GeneralistICC certification in two or more of the following categories: Reinforced Concrete, Spray-applied Fireproofing, Structural Masonry, Prestressed/Post-Tensioned Concrete, Structural Steel - Bolting, Structural Steel - Welding.
Construction Materials Testing (CMT) Engineering Technician II Terracon Consultants IncConstruction Materials Testing (CMT) Engineering Technician IIAthens, GAICC certification in one or more of the following categories: Reinforced Concrete, Spray-applied Fireproofing, Structural Masonry, Prestressed/Post-Tensioned Concrete, Structural Steel - Bolting, Structural Steel - Welding. American Society for Nondestructive Testing (ASNT) Level II certification in more than one of the following areas: Visual Testing (VT), Magnetic Particle Testing (MT), Dye Penetrant Testing (PT), Radiographic Testing (RT), Ultrasonic Testing (UT).
Construction Materials Testing (CMT) Engineering Technician I Terracon Consultants IncConstruction Materials Testing (CMT) Engineering Technician IAthens, GACommunicate with project manager, engineering technicians, client representative, contractor's representative and others as applicable regarding the construction site, project requirements, and testing, observation, and inspection requirements and results. Essential Roles and Responsibilities: Under close supervision of higher level technicians or staff professionals, assist on tasks and perform basic testing and observations duties.
Senior Production Engineering Manager Astemo IndianaSenior Production Engineering ManagerMonroe, GeorgiaOversee manufacturing processes, including precision aluminum and steel machining, plastic injection molding, mechanical assembly, ECU programming, and functional testing. Lead production readiness for new product launches including process validation, PFMEA, control plans, run‑at‑rate, and capacity confirmation.
Engineering Manager - Commodities KplerEngineering Manager - CommoditiesAthens, GAYou will be responsible for building a high-performing and sustainable engineering environment: developing people, improving delivery, strengthening operational ownership and enabling Technical Leads and senior engineers to make strong technical decisions. Our platforms process complex and often incomplete data at scale, powering products, APIs and analytical workflows used by customers and internal experts to understand global trade.
Engineering Operation Technician Amazon.com IncEngineering Operation TechnicianCovington, GAThey will maintain, operate, and troubleshoot, Data Center Operation's Mission Critical Facilities, which includes stand-by diesel generators and related fuel systems, as well as three phase electrical systems such as: switch gear, UPSs, PDUs, wet cell batteries and associated systems, CRAC, centrifugal chillers, cooling towers/water chemical system, air handlers and associated systems, pumps, & motors. They will maintain, operate, and troubleshoot mission-critical data center facility equipment including stand-by diesel generators and related fuel systems, 3 phase electrical systems such as switchgear, UPS units, PDUs, and wet cell batteries and associated systems.
NewEngineering Operation Technician, Night Shift, DCEO - Nights Amazon.com IncEngineering Operation Technician, Night Shift, DCEO - NightsCovington, GAThey will maintain, operate, and troubleshoot, Data Center Operation's Mission Critical Facilities, which includes stand-by diesel generators and related fuel systems, as well as three phase electrical systems such as: switch gear, UPSs, PDUs, wet cell batteries and associated systems, CRAC, centrifugal chillers, cooling towers/water chemical system, air handlers and associated systems, pumps, & motors. They will maintain, operate, and troubleshoot mission-critical data center facility equipment including stand-by diesel generators and related fuel systems, 3 phase electrical systems such as switchgear, UPS units, PDUs, and wet cell batteries and associated systems.
Engineering Operations Technician, DCC Communities Amazon.com IncEngineering Operations Technician, DCC CommunitiesCovington, GAThey will maintain, operate, and troubleshoot, Data Center Operation's Mission Critical Facilities, which includes stand-by diesel generators and related fuel systems, as well as three phase electrical systems such as: switch gear, UPSs, PDUs, wet cell batteries and associated systems, CRAC, centrifugal chillers, cooling towers/water chemical system, air handlers and associated systems, pumps, & motors. They will maintain, operate, and troubleshoot mission-critical data center facility equipment including stand-by diesel generators and related fuel systems, 3 phase electrical systems such as switchgear, UPS units, PDUs, and wet cell batteries and associated systems.
Engineering Maintenance Manager Takeda Pharmaceutical Co LtdEngineering Maintenance ManagerGA$116,000–$182,270 / yearThe actual base salary offered may depend on a variety of factors, including the qualifications of the individual applicant for the position, years of relevant experience, specific and unique skills, level of education attained, certifications or other professional licenses held, and the location in which the applicant lives and/or from which they will be performing the job. As Engineering Maintenance Manager, you will lead the maintenance strategy and daily engineering operations for critical manufacturing assets supporting Takeda's pharmaceutical production.
NewEngineering technician III, Maintenance Fox Factory IncEngineering technician III, MaintenanceGainesville, GAOur premium brand, performance-defining products and systems are used primarily on bicycles, side-by-side vehicles, on-road vehicles with and without off-road capabilities, off-road vehicles and trucks, all-terrain vehicles, snowmobiles, specialty vehicles and applications, motorcycles, and commercial trucks. Some of our products are specifically designed for and marketed to a variety of leading cycling and powered vehicle original equipment manufacturers ("OEMs"), while others are distributed to consumers through a global dealer and distribution network.
Sportsbook - Frontend Engineering Team Lead Betsson GroupSportsbook - Frontend Engineering Team Lead Athens, GAWorking closely with members of the team to ensure successful completion of projects and overall support with all roll-out services; Enabling continuous improvement by supporting when needed; Being responsible for vacation planning of your direct reports; Holding periodic one-to-one meetings to ensure that every individual can perform at his/her best and supporting the development via close work with HR; Motivating the team into improving its performance and ensure that team members are always supported; Leading team efforts (engineers, developers, designers and other team members) towards successful project delivery for our customers; Collaborating with various stakeholders, maintaining a focus on business goals. With more than 2,800 colleagues representing over 75 nationalities across a global network of offices - including 1,500 at our operational headquarters in Malta - every day brings new challenges and opportunities to grow.
Manager, Applications Engineering Fox Factory IncManager, Applications EngineeringGAOur premium brand, performance-defining products and systems are used primarily on bicycles, side-by-side vehicles, on-road vehicles with and without off-road capabilities, off-road vehicles and trucks, all-terrain vehicles, snowmobiles, specialty vehicles and applications, motorcycles, and commercial trucks. Some of our products are specifically designed for and marketed to a variety of leading cycling and powered vehicle original equipment manufacturers ("OEMs"), while others are distributed to consumers through a global dealer and distribution network.
Manager, Design Engineering Power PartnersManager, Design EngineeringAthens, GeorgiaFull timeElectric Research and Manufacturing Cooperative, Inc. (ERMCO) is the leading manufacturer of distribution transformers and engineered electrical solutions, serving electric utilities, Original Equipment Manufacturers (OEMs), and industrial customers across North America. Our vertically integrated operations, customer-focused culture, and investment in people and technology make ERMCO the Most Valued Partner for delivering resilient, sustainable power infrastructure for the future.
NewCAPEX Project & Engineering Lead for Plant Improvements Mitsubishi Chemical AmericaCAPEX Project & Engineering Lead for Plant ImprovementsCovington, GA$113,000–$130,000 / yearResponsibilities include leading cross-functional project teams and managing budgets, risks, and timelines effectively. The ideal candidate holds a Bachelor's degree in Mechanical or Electrical Engineering and has over 5 years of relevant experience.
Tech 2, Product Development Engineering TechDigital CorporationTech 2, Product Development EngineeringWalnut Grove, GAThe position requires hands-on experience with capital equipment systems, pumps, and electro-mechanical assemblies, supporting prototype builds, troubleshooting, and test execution. Build, assemble, and troubleshoot prototype systems and capital equipment, including pumps, fluid systems, and electro-mechanical assemblies.
Critical Infrastructure Electrical Engineer, Field Engineering Amazon.com IncCritical Infrastructure Electrical Engineer, Field EngineeringCovington, GAYou will be the 'go to' engineering resource for your region when technical advice is needed, and will use your subject matter expertise and engage with diverse teams to: Troubleshoot, conduct Root Cause Analysis (RCA) and create Corrective Action (CA) documentation for site/equipment failures. We pioneered cloud computing and never stopped innovating - that's why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses.
Manager, Design Engineering ERMCO Components IncManager, Design EngineeringAthens, GAERMCO (Electric Research and Manufacturing Cooperative, Inc.) is a leading U.S. manufacturer of distribution transformers and engineered electrical solutions serving electric utilities, OEMs, and industrial customers across North America. Our vertically integrated operations, customer-focused culture, and investment in people and technology make ERMCO a trusted partner in delivering resilient, sustainable power infrastructure for the future.
Design Engineering Specialist 1 Fox Factory IncDesign Engineering Specialist 1GAOur premium brand, performance-defining products and systems are used primarily on bicycles, side-by-side vehicles, on-road vehicles with and without off-road capabilities, off-road vehicles and trucks, all-terrain vehicles, snowmobiles, specialty vehicles and applications, motorcycles, and commercial trucks. Some of our products are specifically designed for and marketed to a variety of leading cycling and powered vehicle original equipment manufacturers ("OEMs"), while others are distributed to consumers through a global dealer and distribution network.
NewLead Production Engineering - Lean Automotive Manufacturing AstemoLead Production Engineering - Lean Automotive ManufacturingMonroe, GAAstemo Ltd. in Georgia is seeking a Production Engineering Leader to lead a team of engineers supporting various manufacturing operations. The ideal candidate will have over 10 years of experience in the automotive manufacturing sector, along with strong leadership and communication skills.
NewBD Quality Engineering Development Program Associate Becton, Dickinson & CompanyBD Quality Engineering Development Program AssociateCovington, GAThe goal of the Quality Rotational Program is to improve BD's organizational vitality and to empower early-career professionals through immersive learning focused on the key role quality plays at BD and in the medical device industry to advance the world of health and ensure the safety of our patients. It takes the imagination and passion of all of us—from design and engineering tothe manufacturing and marketing of our billions of MedTech products per year—to look at the impossible and find transformative solutions that turn dreams into possibilities.
Design Engineering Specialist 1 Fox Racing ShoxDesign Engineering Specialist 1Franklin Springs, GAOur premium brand, performance-defining products and systems are used primarily on bicycles, side-by-side vehicles, on-road vehicles with and without off-road capabilities, off-road vehicles and trucks, all-terrain vehicles, snowmobiles, specialty vehicles and applications, motorcycles, and commercial trucks. Some of our products are specifically designed for and marketed to a variety of leading cycling and powered vehicle original equipment manufacturers ("OEMs"), while others are distributed to consumers through a global dealer and distribution network.