Construction Engineering Technician gTANGIBLE CorporationConstruction Engineering TechnicianJacksonville, FloridaParticipate in final acceptance and testing of major building systems including but not limited to fire protection certification, elevator certifications, ensuring contractor compliance in the areas of Testing and Balancing (TABs), Duct Air Leakage Testing (DALTS), Digital Control Systems (DDC) for HVAC systems. Contractor employees performing services must meet the following requirements and have the following licenses and/or certifications, knowledge, skills, and abilities: Technical and practical knowledge and experience (at least 3 years) as an engineering technician, superintendent, or quality control/quality assurance manager or representative.
Construction Quality Control Manager / Engineering Technician Bristol Infrastructure Design Svcs, LLCConstruction Quality Control Manager / Engineering TechnicianJacksonville, FL$104,000 / yearPart timeAverage agility and dexterity, CSE will be required to perform duties that involve moderate walking over rough, uneven or slippery surfaces, recurring bending, crouching, stopping, stretching, climbing ladders, walking up and down several flights of stairs or similar activities, recurring lifting of moderately heavy objects less than 50 lbs., such as testing or measuring equipment, and regular visits to construction sites. A minimum of five (5) years of experience as a Quality Control Manager or Superintendent working for a General Contractor on NAVFAC or USACE projects, OR a minimum of ten (10) years of experience working as a Foreman in one or more of the following trades: carpentry, electrical, roofing, HVAC, plumbing, or concrete on commercial/industrial/military projects valued in excess of $5 million.
Construction Quality Control Manager / Engineering Technician Bristol Alliance of CompaniesConstruction Quality Control Manager / Engineering TechnicianJacksonville, FloridaAverage agility and dexterity, CSE will be required to perform duties that involve moderate walking over rough, uneven or slippery surfaces, recurring bending, crouching, stopping, stretching, climbing ladders, walking up and down several flights of stairs or similar activities, recurring lifting of moderately heavy objects less than 50 lbs., such as testing or measuring equipment, and regular visits to construction sites. A minimum of five (5) years of experience as a Quality Control Manager or Superintendent working for a General Contractor on NAVFAC or USACE projects, OR a minimum of ten (10) years of experience working as a Foreman in one or more of the following trades: carpentry, electrical, roofing, HVAC, plumbing, or concrete on commercial/industrial/military projects valued in excess of $5 million.
Construction Surveillance Engineering Technician BB&EConstruction Surveillance Engineering TechnicianJacksonville, FLA minimum of 5 years of verified experience as a Quality Control Manager working for General Contractors on NAVFAC or US Army Corps of Engineers (USACE) projects OR 10 years of verified foreman experience in one or more of following trades: Concrete; Mechanical; Electrical; Masonry; or Carpentry on commercial/industrial/military projects; residential experience does not qualify. Coordinate support to review and witness successful testing and commissioning/certification of critical systems (i.e., mechanical - HVAC/TABS/DALTS/DDC, electrical -pad mounted transformers/high-voltage systems/switchgear/automatic transfer switches/frequency converters, fire and life safety/fire protection systems, roofing systems, and underwater structures).
Engineering Technician Amphenol CITEngineering TechnicianSaint Augustine, FLA high school diploma or equivalent, e.g., vocational school.1+ years of experience manufacturing or testing microwave cables or related products/processes or an associate degree in Electronic Technology or a similar discipline with less than 1 year of experience. Work EnvironmentTypically, in a manufacturing or textile production setting, the role may involve shift work, overtime, and weekend schedules depending on production needs.
Engineering Manager, Document Management Intercontinental Exchange Holdings, Inc.Engineering Manager, Document ManagementJacksonville, FloridaFull timeThe Document Management Engineering team owns the platforms and workflows that ensure financial services customers can access, manage and rely on critical documents — with the precision and compliance posture that regulated markets demand. This role combines hands-on technical leadership with operational excellence, overseeing release management, environment operations, team delivery and cross-functional coordination to ensure the platform is built, deployed and maintained at production scale.
Civil Engineering Manager GpacCivil Engineering ManagerJacksonville, FL120000–150000This position will be responsible for the day to day operations of the firms Land Development department, including but not limited to team supervision, budget tracking, planning & zoning, client management, contract negotiating and employee retention. GPAC (Growing People and Companies) is an award-winning search firm specializing in placing quality professionals within multiple industries across the United States since 1990.
NewCivil Engineering Manager (Public Sector) GpacCivil Engineering Manager (Public Sector)Jacksonville, FL130000–150000This position will be responsible for the day to day operations of the firms municpal/public works department, including but not limited to team supervision, budget tracking, planning & zoning, client management, contract negotiating and employee retention. GPAC (Growing People and Companies) is an award-winning search firm specializing in placing quality professionals within multiple industries across the United States since 1990.
Engineering Technician - Mechanical (AC&R Navy Ship Systems) Supply Chain Management Inc.1.com (SCMI1)Engineering Technician - Mechanical (AC&R Navy Ship Systems)Mayport, FL4. Documented experience with MS Office, NMD, eDFS, NSEDR, and/or TASS-Info Specific Experience: The experience required is a combination of mechanical and electrical disciplines, but is primarily mechanical in nature.(a) Supply Chain Management Inc.1.com (SCMI1) has an exciting opportunity in support of Southeast Regional Maintenance Center (SERMC) for an Engineering Technician with a mechanical focus.
Engineering Technician - Electrical (Fresh Water & Fuel Oil Navy Ship Systems) Supply Chain Management Inc.1.com (SCMI1)Engineering Technician - Electrical (Fresh Water & Fuel Oil Navy Ship Systems)Mayport, FLFull timea) Assessment and oversight of repairs of U.S. Navy ships’ fresh water production, fuel oil, lube oil and pollution abatement equipment including the associated pumps, piping, and PLC controllers. 4. Documented experience with MS Office, Navy Maintenance Database (NMD), Electronic Departure from Specifications (eDFS), Navy Ship's Engineering Drawing Repository (NSEDR), and/or TASS-Info.
Engineering Technician - Electrical (Shipboard Electro-Hydraulic Equipment) Supply Chain Management Inc.1.com (SCMI1)Engineering Technician - Electrical (Shipboard Electro-Hydraulic Equipment)Mayport, FLAssessment and oversight of repairs of the following U.S. Navy shipboard electro-hydraulic equipment: steering systems, boat davits, cranes, elevators and hoists, or similar control and electric drive systems on high pressure hydraulic equipment. Supply Chain Management Inc.1.com (SCMI1) has an exciting opportunity in support of Southeast Regional Maintenance Center (SERMC) for an Engineering Technician with an electrical focus, specifically shipboard electro-hydraulic equipment.
Engineering Technician - Electrical (Laundry/Galley/Fire Suppression Navy Ship Systems) Supply Chain Management Inc.1.com (SCMI1)Engineering Technician - Electrical (Laundry/Galley/Fire Suppression Navy Ship Systems)Mayport, FL4. Documented experience with MS Office, Navy Maintenance Database (NMD), Electronic Departure from Specifications (eDFS), Navy Ship's Engineering Drawing Repository (NSEDR), and/or TASS-Info. Supply Chain Management Inc.1.com (SCMI1) has an exciting opportunity in support of Southeast Regional Maintenance Center (SERMC) for an Engineering Technician with an electrical focus.
CERTIFIED NAVY Gas Turbine Engineering Technician (MGTI) Supply Chain Management Inc.1.com (SCMI1)CERTIFIED NAVY Gas Turbine Engineering Technician (MGTI)Mayport, FLSupply Chain Management Inc.1.com (SCMI1) has an exciting opportunity for an Engineering Technician VI (Mechanical focus - Gas Turbine Technician) position supporting the Southeast Regional Maintenance Center (SERMC) , providing Hull, Mechanical, and Electrical (HM&E) engineering and technical support services on U.S. Naval Ships in port and underway at U.S. Naval facilities and shipyards. Physical requirements for efficient navigation aboard US Navy ships includes possessing the physical stamina, strength, agility, and endurance to walk continuously for extended periods of time without experiencing significant fatigue, adequate upper and lower-body strength necessary to climb ladders, stairs, ramps, and work aloft, and agility necessary to enter/exit confined spaces.
Staff Engineering Technician TPI Global (formerly Tech Providers, Inc.)Staff Engineering TechnicianJacksonville, FLThis role will be within the Black & Veatch Distributed Infrastructure solution, supporting client needs related to Battery Energy Storage System (BESS) projects. Provides technical guidance and may offer direction to other engineering professionals and technicians to ensure quality and consistency across project outputs.
Solar Engineering Manager Charlie Mike RecruitingSolar Engineering ManagerJacksonville, FloridaAct as liaison with Project Management on matters relating to engineering progress, quality, scope issues on projects as well as interface with customers on technical questions/concerns. Charlie Mike has partnered with a national leader offering comprehensive energy solutions (Solar, CHP, Battery, Storage) to commercial and industrial clients across the country.
Telecommunications Engineering Technician LeidosTelecommunications Engineering TechnicianJacksonville, FloridaThe National Airspace Systems Integration Support (NISC) program at Leidos is seeking a Telecommunications Engineering Technician to provide support to the Federal Aviation Administration (FAA) Central Service Area - Engineering Services Group located across the United States. June 26, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.
Ctio AI Engineering Manager PwCCtio AI Engineering ManagerJacksonville, FL$73,500–$212,280 / yearThose in data science and machine learning engineering at PwC will focus on leveraging advanced analytics and machine learning techniques to extract insights from large datasets and drive data-driven decision making. PwC does not intend to hire experienced or entry level job seekers who will need, now or in the future, PwC sponsorship through the H-1B lottery, except as set forth within the following policy: https://pwc.to/H-1B-Lottery-Policy .
Senior Construction Project Engineering Manager Consor EngineersSenior Construction Project Engineering ManagerJacksonville, FloridaFull timeAs an experienced leader you will guide a regional group of Construction Engineering Inspection (CEI) teams in the execution of Department of Transportation and municipal projects having scopes including; milling and resurfacing, intersection improvements, drainage, earthwork, bridge work and utility relocations. Your key responsibilities will include ensuring that projects adhere to contract documents, budget constraints, and schedules through implementation of sound document controls, internal quality assurance measures, leading communications between project stakeholders, and participation in progress meetings.
Project Manager - Civil Engineering Jones Edmunds and AssociatesProject Manager - Civil EngineeringJacksonville, FLWho You Are: Education/Experience: BS in Engineering, Science, Architecture, Management, or related field or equivalent progressive experience in municipal civil/environmental projects. If you're energized by leading diverse projects, building client relationships, and mentoring the next generation of engineers, this could be a great fit for you.
Electrical Design Engineering Manager Industrial Electric ManufacturingElectrical Design Engineering ManagerJacksonville, FloridaThis role is responsible in bridging design and manufacturing, ensuring that engineering outputs—primarily dual-purpose customer submittal and production drawings—meet the needs of our local manufacturing facilities. Travel to customer sites or other IEM facilities occasionally for engineering surveys, training, engineering department meetings, technical project meetings, or other project related business.