NewMechanical Technician Becton DickinsonMechanical TechnicianCanaan, CTIt takes the imagination and passion of all of us-from design and engineering to the manufacturing and marketing of our billions of MedTech products per year-to look at the impossible and find transformative solutions that turn dreams into possibilities. The Manufacturing Equipment Technician is responsible for operating, troubleshooting, and maintaining production equipment to ensure safe, efficient, and high-quality manufacturing operations.
NewCalibration and Maintenance Technician AxelonCalibration and Maintenance TechnicianGroton, CT$30–$36 / hourLead complex mechanical repairs, perform instrument calibrations, and conduct lock out tag outs. High School Diploma with minimum 2 years of experience in equipment, electrical, and/or instrumentation maintenance.
Engineering Technician II inSync StaffingEngineering Technician IISouthington, CT$26.41–$34.74 / hourMinimum Qualifications, Education & Experience High School Diploma required along with either 3-5 years’ work experience as an engineering technician in a related position within a manufacturing or testing organization, an associate’s degree in a related field with 2 plus years’ work experience, or a bachelor’s degree in a related technical field. Responsibilities include performing research, building prototypes, validating test methods, inspecting products, support building test fixtures, conducting tests, analyzing, reporting, and presenting on data, ensuring sites are safe and clean, and reporting to the Lab supervisor/Manager.
Electrical Engineering Technician / Associate Electrical Engineer ZobilityElectrical Engineering Technician / Associate Electrical EngineerBloomfield, CTResponsibilities include but are not limited to: PCB: Procure components, organize BOM, assemble, stuff and fabricate PCB using solder past stencil, microscope, reflow oven and/or manual soldering for all aspects of prototype printed circuit board of mixed technology. Perform root-cause failure analysis on field returned assemblies, document and publish finding to engineering community at large to ensure product reliability in support of companywide ACE initiatives.
Senior Engineering Technician Haley WardSenior Engineering TechnicianWinsted, CTPrepares drawings, plans, and other CADD documents as needed to support project matters using Civil 3D, including the use of corridors, surface manipulation, plans, profiles, and cross sections. The function of the Senior Engineering Technician is to provide assistance to Project Managers and Engineers on projects performing Engineering Technician responsibilities as needed.
Engineering Technician Amphenol Communications SolutionsEngineering TechnicianHamden, CTCollaborate with cross functional engineering teams to collect and interpret data which enhances organizational learning. RESPONSIBILITIES: As an Engineering Lab Technician, you are responsible for supporting continuous operation of research and development test processes.
Senior Engineering Technician Haley Ward IncSenior Engineering TechnicianCTPrepares drawings, plans, and other CADD documents as needed to support project matters using Civil 3D, including the use of corridors, surface manipulation, plans, profiles, and cross sections. What you can expect to be doing: The function of the Senior Engineering Technician is to provide assistance to Project Managers and Engineers on projects performing Engineering Technician responsibilities as needed.
Engineering Technician Apogee Global RMSEngineering TechnicianGroton, ConnecticutApogee Global RMS is a veteran-led enterprise risk advisory consulting and talent solutions firm supporting federal agencies and defense organizations with highly specialized engineering, technical, and mission-critical workforce solutions. The successful candidate will work closely with U.S. Navy maintenance activities, shipyards, engineering teams, and government stakeholders to support inspection, maintenance, troubleshooting, installation, and system readiness.
Mfg. Engineering Technician - Weekend Shift Ebm-papst IncMfg. Engineering Technician - Weekend ShiftFarmington, CTThis position is responsible for developing and writing final product assembly instructions, entering basic process routings, and supporting the transition of new assigned products from engineering concepts to final production processes. You will be responsible for setting up, programming and optimizing CNC blanking and forming operations to produce high-quality components and tooling.
Engineering Technician (second Shift) FuelCell Energy IncEngineering Technician (second Shift)Torrington, CTEducation & Work Experience: Associate degree in engineering technology, manufacturing technology, or a related technical field with a minimum of 3 years of relevant experience, or a high school diploma/GED with 5+ years of applicable industrial or manufacturing experience. Partnering with other members of the Value Stream Team, including quality, product, and industrial engineers, you will help execute process requirements and provide technical support to continuously improve safety, cost, quality, production capacity, and process yields.
Engineering Technician FuelCell Energy IncEngineering TechnicianTorrington, CTEducation & Work Experience: Associate degree in engineering technology, manufacturing technology, or a related technical field with a minimum of 3 years of relevant experience, or a high school diploma/GED with 5+ years of applicable industrial or manufacturing experience. Partnering with other members of the Value Stream Team, including quality, product, and industrial engineers, you will help execute process requirements and provide technical support to continuously improve safety, cost, quality, production capacity, and process yields.
Engineering Technician - Product Evaluation Job ID 2023-01447 ConairEngineering Technician - Product Evaluation Job ID 2023-01447Stamford, ConnecticutThe Engineering Technician – Product Evaluation supports Post-Market Performance & Product Surveillance across the Conair, Babyliss, Cuisinart, and Waring brands by performing engineering evaluations of returned products to identify failure modes, investigate product performance issues, and generate technical data that supports continuous product improvement. Working closely with Product Evaluation Engineers, Product Engineering, Product Certification, and Global Engineering teams, this role performs hands-on product evaluations, documents engineering findings, and helps identify trends that improve product quality, reduce warranty costs, and enhance customer satisfaction.
Engineering Technician II - Shift 1 LancesoftEngineering Technician II - Shift 1Southington, CT$26.41Responsibilities include performing research, building prototypes, validating test methods, inspecting products, support building test fixtures, conducting tests, analyzing, reporting, and presenting on data, ensuring sites are safe and clean, and reporting to the Lab supervisor/Manager. High School Diploma required along with either 3-5 years work experience as an engineering technician in a related position within a manufacturing or testing organization, an associate s degree in a related field with 2 plus years work experience, or a bachelor s degree in a related technical field.
Engineering Technician Actalent IncEngineering TechnicianWilton, CT$24–$26 / hourThis role is ideal for candidates with hands-on mechanical, electrical, manufacturing, or engineering technician experience who enjoy solving technical problems, building complex equipment, and working in a highly collaborative team environment. This role plays a critical part in supporting production, engineering initiatives, process improvements, new product introductions, and continuous improvement activities within a world-class manufacturing environment.
Manufacturing Engineering Technician II Resonetics, LLCManufacturing Engineering Technician IIBethel, CT$23.08–$30.77 / hourA Lightspeed Technician II is primarily responsible for assisting Application Development Engineers and Senior Application Development Technicians in demonstrating process feasibility and meeting quality specifications on Lightspeed ADL projects. Read and interpret print specifications on Lightspeed projects, ensure all required visual and geometric measurements are taken and documented per Quality Systems requirements.
AN/BYG-1 Submarine Combat Control System Engineering Technician Atlas Technologies IncAN/BYG-1 Submarine Combat Control System Engineering TechnicianGroton, CTTeam members are regularly encouraged to continue learning and Atlas provides training resources and skills enhancement opportunities internally as well as education reimbursement if you prefer to obtain skills through outside resources or higher education.” Atlas Tech is a rapidly expanding company supporting the U.S. Military and other Government entities and we are seeking a passionate, flexible, and highly motivated team player to join our group of Technology professionals.
Submarine Electronic Warfare Engineering Technician Atlas Technologies IncSubmarine Electronic Warfare Engineering TechnicianGroton, CT$50,814.40–$77,001.60 / yearThe Electronic Warfare Engineering Technician will provide onsite installation, testing, troubleshooting, and repair of ISIS in accordance with DoD and U.S. Navy Maintenance Procedures, and Cyber System instructions. Atlas is a rapidly expanding company supporting the U.S. Military and other Government entities and we are seeking a passionate, flexible, and highly motivated team player to join our group of Technology professionals.
Sr. Submarine Electronic Warfare Engineering Technician Atlas Technologies IncSr. Submarine Electronic Warfare Engineering TechnicianGroton, CT$77,022.40–$93,000 / yearThe Electronic Warfare Engineering Technician will provide onsite installation, testing, troubleshooting, and repair of ISIS in accordance with DoD and U.S. Navy Maintenance Procedures, and Cyber System instructions. Atlas is a rapidly expanding company supporting the U.S. Military and other Government entities and we are seeking a passionate, flexible, and highly motivated team player to join our group of Technology professionals.
AN/BYG-1 Submarine Combat Control System Engineering Technician Atlas Tech IncAN/BYG-1 Submarine Combat Control System Engineering TechnicianCTTeam members are regularly encouraged to continue learning and Atlas provides training resources and skills enhancement opportunities internally as well as education reimbursement if you prefer to obtain skills through outside resources or higher education. Atlas Tech is a rapidly expanding company supporting the U.S. Military and other Government entities and we are seeking a passionate, flexible, and highly motivated team player to join our group of Technology professionals.
Sr. Submarine Electronic Warfare Engineering Technician Atlas Tech IncSr. Submarine Electronic Warfare Engineering TechnicianCT$77,022.40–$93,000 / yearThe Electronic Warfare Engineering Technician will provide onsite installation, testing, troubleshooting, and repair of ISIS in accordance with DoD and U.S. Navy Maintenance Procedures, and Cyber System instructions. Atlas is a rapidly expanding company supporting the U.S. Military and other Government entities and we are seeking a passionate, flexible, and highly motivated team player to join our group of Technology professionals.
Submarine Electronic Warfare Engineering Technician Atlas Tech IncSubmarine Electronic Warfare Engineering TechnicianCT$50,814.40–$77,001.60 / yearThe Electronic Warfare Engineering Technician will provide onsite installation, testing, troubleshooting, and repair of ISIS in accordance with DoD and U.S. Navy Maintenance Procedures, and Cyber System instructions. Atlas is a rapidly expanding company supporting the U.S. Military and other Government entities and we are seeking a passionate, flexible, and highly motivated team player to join our group of Technology professionals.
NewManufacturing Engineering Technician Nesco Resource, LLCManufacturing Engineering TechnicianBethel, CT$25–$30 / hourOther responsibilities may include; participation in production readiness activities and involvement in continuous improvement activities for current production jobs. Additional areas of focus may include but are not limited to: setup reduction, procedure generation, operator training, Inspection Software Development, tool design or selection.
Submarine Electronics Engineering Technician Amentum Services IncSubmarine Electronics Engineering TechnicianGroton, CTThe ability to obtain and maintain a Top Secret US Government Clearance #TAMOD Compensation Details: US: $37.03 AND UP HOURLY MINIMUM - Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, and market data The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Develop technical/engineering data for Planned Maintenance Systems (PMS), Technical manuals, troubleshooting procedures, drawing updates, operation procedures, and maintainability improvements.
Combat Systems Engineering Technician (AN/BYG-1) AmentumCombat Systems Engineering Technician (AN/BYG-1)ConnecticutThe successful candidate will provide technical evaluation and perform the required corrective actions for AN/BYG-1 systems in accordance with DoD, Navy Maintenance Procedures, and Cyber System instructions; assist in the disassembly, reassembly, installation and testing of the AN/BYG-1 systems of submarines; and provide support in a variety of engineering tasks in the installation, maintenance, repair, troubleshooting, calibration, testing, operation of AN/BYG-1 systems in accordance with engineering specifications. In accordance with the Health and Welfare provisions of the SCA, and in addition to your base hourly rate, you may be eligible to receive an additional health and welfare payment for each hour you work to ensure compliance with the minimums set forth by the act.
Senior Combat Systems Engineering Technician (AN/BYG-1) AmentumSenior Combat Systems Engineering Technician (AN/BYG-1)ConnecticutThe successful candidate will provide technical evaluation and perform the required corrective actions for AN/BYG-1 systems in accordance with DoD, Navy Maintenance Procedures, and Cyber System instructions; assist in the disassembly, reassembly, installation and testing of the AN/BYG-1 systems of submarines; and provide support in a variety of engineering tasks in the installation, maintenance, repair, troubleshooting, calibration, testing, operation of AN/BYG-1 systems in accordance with engineering specifications. (Degree/Formal Training is defined as: Associate’s degree in engineering technology, math, or science; or Formal electronics training from: Technical School, or Class A or B military school in electronics or communications; or four-year electronics apprentice program.).
Senior Submarine Electronic Warfare Engineering Technician Amentum Services IncSenior Submarine Electronic Warfare Engineering TechnicianCTDegree/Formal Training is defined as: Associate's degree in engineering technology, math, or science; or Formal electronics training from: Technical School, or Class A or B military school in electronics or communications; or four-year electronics apprentice program.). In accordance with the Health and Welfare provisions of the SCA, and in addition to your base hourly rate, you may be eligible to receive an additional health and welfare payment for each hour you work to ensure compliance with the minimums set forth by the act.
Senior Submarine Electronic Warfare Engineering Technician AmentumSenior Submarine Electronic Warfare Engineering TechnicianConnecticutDegree/Formal Training is defined as: Associate’s degree in engineering technology, math, or science; or Formal electronics training from: Technical School, or Class A or B military school in electronics or communications; or four-year electronics apprentice program.). In accordance with the Health and Welfare provisions of the SCA, and in addition to your base hourly rate, you may be eligible to receive an additional health and welfare payment for each hour you work to ensure compliance with the minimums set forth by the act.
Outside Marine Machinist Engineering Technician (Torpedo Tube Assembler) Orbis Sibro IncOutside Marine Machinist Engineering Technician (Torpedo Tube Assembler)CTMust, at a minimum, have High School/Vocational School diploma or GED Certificate 2 years of time-in-the-trade performing Torpedo tube work on US Navy ships, and/or successfully completed a formal course of study in the assigned trade through either a community college, technical or trade school, military training, formal company training program, or an apprentice program in the Marine Mechanical Trades. Must have a minimum of four (4) years of verifiable experience as an outside machinist with inspection, assembly, and installation experience of submarine torpedo tubes and submarine shipping and handling systems.
Control Systems Engineering Technician, B Connecticut Water Service IncControl Systems Engineering Technician, BClinton, CTThe Control Systems Engineering Technician is responsible for performing a variety of tasks that include control systems support for the 250+ facilities throughout the Company. Performs annual production testing company-wide, which includes calibration, services, and tests of various metering devices.
Engineering Technician Parsons CorpEngineering TechnicianCT$15.68–$71.30 / hourAssists with electronics installations, integration and testing for rehoming and monitoring the AFSS radio's to the selected Enroute and Terminal Air Traffic, installs other Radio Control Equipment (RCE) such as VHF and UHF radio communication systems to transmit and receive radio messages, as well as electrical power panels; conduit; cableways; control cables; duct banks; AC power panels; racks for various FAA systems. Tests and trouble-shots electrical components by applying the theory of operation of transistors, solid state components, integrated circuits, motors, servos, power transmissions, and other electrical devices utilizing electrical schematics, wiring diagrams, blue prints, color codes, publications, and other technical data.
C4I Electronic Engineering Technician Amentum Services IncC4I Electronic Engineering TechnicianCTFive (5) years of practical experience and High School diploma/GED OR Three (3) years practical experience and an Associate's Degree in Engineering Technology, math, or science; or Formal electronics training from: Technical School, or Class A or B military school in electronics or communications; or four-year electronics apprentice program. In accordance with the Health and Welfare provisions of the SCA, and in addition to your base hourly rate, you may be eligible to receive an additional health and welfare payment for each hour you work to ensure compliance with the minimums set forth by the act.
C4I Electronic Engineering Technician AmentumC4I Electronic Engineering TechnicianConnecticutFive (5) years of practical experience and High School diploma/GED OR Three (3) years practical experience and an Associate’s Degree in Engineering Technology, math, or science; or Formal electronics training from: Technical School, or Class A or B military school in electronics or communications; or four-year electronics apprentice program. In accordance with the Health and Welfare provisions of the SCA, and in addition to your base hourly rate, you may be eligible to receive an additional health and welfare payment for each hour you work to ensure compliance with the minimums set forth by the act.
Engineering Technician OFS Fitel LLCEngineering TechnicianAvon, CTOur mission is to provide leading optical innovations and solutions by designing, manufacturing and supplying the best optical fibers, fiber cable and components and devices for our customers, with exceptional service that creates value for our shareholders, customers and employees. Headquartered in Norcross, Georgia, U.S.A., Lightera operates with a global footprint, serving customers across telecommunications, enterprise, industrial, generative AI, data centers, 5G/6G, utilities, medical, aerospace, defense, and sensing markets.
Process Engineering Technician Marmon HoldingsProcess Engineering TechnicianEast Granby, ConnecticutThe Process Engineering Technician is responsible for duties related to assisting with the development of new materials, producing wire and cable prototype samples, and assisting with research and developmental test plans. As a part of Marmon Holdings, Inc., a highly decentralized organization, we rely heavily on people with the aptitude, attitude, and entrepreneurial spirit to drive our success, and we're committed to attracting and retaining top talent.
Engineering Technician II Dobbs Defense Solutions, LLCEngineering Technician IIGroton, CTFull timeRequired Education and Experience: Ten (10) years of practical experience and High School diploma/GED OR Six (6) years practical experience Associate's Degree in Engineering Technology, math, or science; or Formal electronics training from: Technical School, or Class A or B military school in electronics or communications; or four-year electronics apprentice program. You will also perform validations/verifications of various electronic systems related to the operation of the ISIS System and Photonics Mast Variants (PMV) to include Mast Technical Insertion (MTI) and Low-Profile Photonics Mast (LPPM).
Submarine Electronic Warfare Engineering Technician (AN/BLQ-10) Amentum Services IncSubmarine Electronic Warfare Engineering Technician (AN/BLQ-10)CTIn accordance with the Health and Welfare provisions of the SCA, and in addition to your base hourly rate, you may be eligible to receive an additional health and welfare payment for each hour you work to ensure compliance with the minimums set forth by the act. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.
Submarine Peculiar Special & Support Equipment Engineering Technician V AmentumSubmarine Peculiar Special & Support Equipment Engineering Technician VConnecticutTOTEMS, Torpedo Shapes, Harpoon Shapes and non-ordnance variants, AURVS, AURES (Mk 101 & Mk 112), Mk 60 AURS's, (163) missile tube ballast cans (109-54), AURBb's, Mk 34 shipping & stowage skids, (56) AERO 51B/E munitions trailers (52-4), (12) SSN688 VLS Platforms and handling slings, (5) SSN774 VLS Platforms, (3) Virginia Payload Tube (VPT) SSN774 VLS Platforms (1-2), TMD slings, CLS ordnance and non-ordnance handling gear, Weight Handling Equipment, handling slings and beams, Deployment Stands, Torpedo and Tomahawk Ancillary Gear, VA Class Weapon Cradles, Capsule Loading Covers, MK-23 Tilt Fixture and all empty containers, Crew Training Shapes (CTS), and Mk 793 Mod 0. Perform Operational Procedures (OP's) on the following: AURVS's, Missile Tube Ballast Cans, AURBb's, Mk 60 AURSs, TOTEMS, MK-48 FITMENT Shape, TOMFISH, AERO 51 Class Munition Trailers, MK-34 Shipping and Storage Containers, MK-30 Shipping and Storage Containers, CNU 308 Shipping and Storage Containers, Mk 793 Shipping and Storage Containers, and Torpedo Mounted Dispenser (TMD's) IAW Technical Manual and local instructions.
Submarine Peculiar Special & Support Equipment Engineering Technician II AmentumSubmarine Peculiar Special & Support Equipment Engineering Technician IIConnecticutTOTEMS, Torpedo Shapes, Harpoon Shapes and non-ordnance variants, AURVS, AURES (Mk 101 & Mk 112), Mk 60 AURS's, (163) missile tube ballast cans (109-54), AURBb's, Mk 34 shipping & stowage skids, (56) AERO 51B/E munitions trailers (52-4), (12) SSN688 VLS Platforms and handling slings, (5) SSN774 VLS Platforms, (3) Virginia Payload Tube (VPT) SSN774 VLS Platforms (1-2), TMD slings, CLS ordnance and non-ordnance handling gear, Weight Handling Equipment, handling slings and beams, Deployment Stands, Torpedo and Tomahawk Ancillary Gear, VA Class Weapon Cradles, Capsule Loading Covers, MK-23 Tilt Fixture and all empty containers, Crew Training Shapes (CTS), and Mk 793 Mod 0. Perform Operational Procedures (OP's) on the following: AURVS's, Missile Tube Ballast Cans, AURBb's, Mk 60 AURSs, TOTEMS, MK-48 FITMENT Shape, TOMFISH, AERO 51 Class Munition Trailers, MK-34 Shipping and Storage Containers, MK-30 Shipping and Storage Containers, CNU 308 Shipping and Storage Containers, Mk 793 Shipping and Storage Containers, and Torpedo Mounted Dispenser (TMD's) IAW Technical Manual and local instructions.
Quality Engineering Technician Honeywell International IncQuality Engineering TechnicianCTAs a trusted partner, we provide actionable solutions and innovation through our Aerospace Technologies, Building Automation, Energy and Sustainability Solutions, and Industrial Automation business segments - powered by our Honeywell Forge software - that help make the world smarter, safer and more sustainable. BA products and services include advanced software applications for building control and optimization; sensors, switches, control systems, and instruments for energy management; access control; video surveillance; fire products; and installation, maintenance, and upgrades of systems.
Manufacturing Engineering Technician II ResoneticsManufacturing Engineering Technician IIBethel, Connecticut$23.08–$30.77 / hourFull timeA Lightspeed Technician II is primarily responsible for assisting Application Development Engineers and Senior Application Development Technicians in demonstrating process feasibility and meeting quality specifications on Lightspeed ADL projects. Read and interpret print specifications on Lightspeed projects, ensure all required visual and geometric measurements are taken and documented per Quality Systems requirements.
Engineering Laboratory Technician The Lee Company Inc.Engineering Laboratory TechnicianCTFabrication of testing devices and set upsCalibration of equipmentAttention to detailReading schematic diagrams and engineering drawingsResponsibilitiesFabricate and set up mechanical andor electrical testing devices and apparatus. Position Engineering Laboratory TechnicianLocation Essex CT| Full TimeCompany OverviewThe Lee Company is a global leader in the design and production of miniature precision fluid control components for the aerospace medicalscientific instrument oil tool and automotive industries.
Engineering Technician 1 Hanwha Aerospace USAEngineering Technician 1Newington, CTAssist with creating work instructions, setup instructions, and perform training events to ensure Coordinate Measurement Machine (CMM) operators can efficiently operate the machine and execute measure programs. Physical capability is evaluated through a post-offer, pre-employment Human Performance Evaluation (HPE), which assesses an individual's ability to perform the essential functions of the job safely and effectively, with or without reasonable accommodation, in accordance with applicable laws.
Clinical Engineering IT Technician Trimedx Holdings LLCClinical Engineering IT TechnicianStamford, CTEnsures the Clinical Engineering program and associates are capable of and maintain the connected device inventory with information related to clinical equipment in TRIMEX' RSQ platform including, but not limited to, IP addresses, MAC addresses, AE titles, OS information, firmware versions, application versions, security attributes, equipment criticality and recovery information. Team Work & Customer Satisfaction (25%) • Helps to create and foster an environment of innovation; works to identify and remove roadblocks, and enables collaboration between clinical engineering and IT services; advocates for the adoption of behaviours and skills related to networking and IT throughout the Clinical Engineering department.
Engineering Technician II Honeywell International IncEngineering Technician IICT$64,900–$97,240 / yearAs a trusted partner, we provide actionable solutions and innovation through our Aerospace Technologies, Building Automation, Energy and Sustainability Solutions, and Industrial Automation business segments - powered by our Honeywell Forge software - that help make the world smarter, safer and more sustainable. BA products and services include advanced software applications for building control and optimization; sensors, switches, control systems, and instruments for energy management; access control; video surveillance; fire products; and installation, maintenance, and upgrades of systems.
Facilities Technician (Per Diem) - Engineering (Westport Campus) Hartford HealthCare CorpFacilities Technician (Per Diem) - Engineering (Westport Campus)Westport, CTPerforms the decorative application to walls, ceiling and other structures which includes scraping, sanding, filling holes and cracks, removing /replacing outlet and switch covers, masking and applying paint or wall covering to surfaces based on manufacturing specifications. Utilizes materials (wood, metal, concrete, plastics, composites) to fit and install glass windows, pictures, ceiling tiles, perimeter rail systems, wood trim and moldings, medical hardware stations, fire extinguishers, eye wash stations and other projects.
Electronics Technician II Apollo Professional Solutions IncElectronics Technician IICT$35.44–$39.37 / hourJob Responsibility: Electrical Engineering Technician / Associate level Electrical Engineer Our client in Bloomfield CT is seeking an enthusiastic, creative, and result oriented Electrical Engineering Technician or Associate level Electrical Engineer to leverage technology in support of legacy and new Elevator control system electronics. Procure components, organize BOM, assemble, stuff and fabricate PCB using solder past stencil, microscope, reflow oven and/or manual soldering for all aspects of prototype printed circuit board of mixed technology.
Specialist -Engineering Tech Kinder Morgan IncSpecialist -Engineering TechENFIELD, CTThis role covers a broad geographical area including Ohio, New York, Massachusetts, Pennsylvania, Connecticut, Rhode Island, New Hampshire, and New Jersey, and provides both on-site and remote support for: Industrial gas turbine / centrifugal compressor trains. This position supports assets across Tennessee Gas Pipeline (TGP), Stagecoach Storage, and Arlington Storage, focusing on automation, electrical, and hardware systems at natural gas compressor and measurement stations.
Civil Engineering Senior Project Manager Haley WardCivil Engineering Senior Project ManagerGlastonbury, CTThe Senior Project Manager is responsible for planning, organizing, designing, and controlling the activities of projects to best accomplish the successful completion while operating within established schedules, budgets, and Quality Assurance/Quality Control (QA/QC) policy constraints. Haley Ward’s work philosophy is to take advantage of the benefits of collaboration, mentoring, and face-to-face communication in order to optimize our operations and performance for our clients.
NewEntry Level Engineering Grads Actalent IncEntry Level Engineering GradsWilton, CT$24–$26 / hourWe are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing winner for both client and talent service. This is an excellent opportunity to work in the semiconductor industry, partnering closely with engineering teams and gaining exposure to cutting-edge technology with strong long-term growth potential.
Civil Engineering Senior Project Manager Haley Ward IncCivil Engineering Senior Project ManagerGlastonbury, CTThe Senior Project Manager is responsible for planning, organizing, designing, and controlling the activities of projects to best accomplish the successful completion while operating within established schedules, budgets, and Quality Assurance/Quality Control (QA/QC) policy constraints. Haley Wards work philosophy is to take advantage of the benefits of collaboration, mentoring, and face-to-face communication in order to optimize our operations and performance for our clients.