NewPCB Layout Hardware Design Engineer (GA-2/3) Legato, LLCPCB Layout Hardware Design Engineer (GA-2/3)Annapolis Junction, MD$220,000–$280,000 / yearThis role coordinates with engineering teams to align interrelated designs and ensure project completion; performs component and assembly design analysis to confirm cost efficiency, manufacturability, and reliability; and applies ASIC or FPGA place-and-route (P&R) tools and libraries to create physical design implementations. The engineer will work with tool and library vendors to resolve design challenges, de-process electronic components, retrieve stored firmware or software using approved reverse-engineering procedures, improve those procedures, and provide technical leadership to less experienced engineers.
NewHardware Design Engineer, Level 3 (2026-0068) Acclaim Technical ServicesHardware Design Engineer, Level 3 (2026-0068)Annapolis Junction, MD$212,630.17–$258,750.25 / yearJob Description Acclaim Technical Services, founded in 2000, is a leading cyber operations, intelligence solutions and operations, network infrastructure, engineering and business enablement and enterprise operations company supporting a wide range of U.S. Federal agencies. Pay Range : There are many factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications.
NewHardware Engineer Tensley Consulting, Inc.Hardware EngineerFort Meade, MD$170,000–$190,000 / yearProduce AutoCAD/Visio drawings, block diagrams, schematics, and technical design packages; ● Prepare engineering plans, as‑built documentation, test reports, and maintenance records; coordinate with cross‑functional teams (system architects, PMs, test sites). We are seeking a Hardware Engineer to join our team and be responsible for for designing, installing, and testing RF systems, with a focus on SATCOM components and devices operating in various frequency bands, including but not limited to C-band, X-band, Ku-band, Ka-band, and Q/V-band.
NewHardware Engineer Athenix Solutions GroupHardware EngineerAnnapolis Junction, MDPerforming higher level network design with Cisco and create Power Space and Cooling (PSC), Build of Material (BOM), Baseline Exception Requirements (BER) and other documents required to procure equipment. Entry Level – Bachelor’s degree in an engineering or related field, and no or minimal experience (Note: even without a degree experience can qualify you for this level with 4 years of relevant experience).
NewHardware Exploitation Engineer (TS/SCI)- Senior & Mid Vexterra GroupHardware Exploitation Engineer (TS/SCI)- Senior & MidBethesda, MDExperience in Hardware Tools and Debuggers: Green Hills Probe, SuperTrace Probe, Slingshot, spectrum analyzer, logic analyzer, JTAG, Agilent Technologies equipment. Perform inspection, imaging, decapsulation, deprocessing, and other activities related to hardware reverse engineering and exploitation in a state of-the-art microelectronics exploitation laboratory.
NewHardware Engineer JobotHardware EngineerMONTGOMRY VLG, MD$120,000–$140,000 / yearWith deep expertise in cloud-first architectures, automation, DevSecOps, virtualization, reliability engineering, and large-scale systems integration, we help organizations modernize infrastructure, improve operational efficiency, and support mission-critical environments where performance, security, and resiliency are essential. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal.
NewSoftware/Integration Engineer - Hardware/Software Acquired Data SolutionsSoftware/Integration Engineer - Hardware/SoftwareRockville, MDBS in Electrical Engineering, Computer Engineering, Computer Science, or related field. and troubleshooting, test and measurement, and technical support for solutions in a wide range of.
NewSystem Test Engineer (Hardware & Software / FAA) JobotSystem Test Engineer (Hardware & Software / FAA)Rockville, MD$120,000–$170,000 / yearInformation collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. We are committed to creating an environment where employees are empowered to make an impact, work alongside highly talented teams, and contribute to meaningful, mission-critical initiatives in a supportive and forward-thinking workplace.
NewSenior Staff Engineer, Electrical Baltimore Aircoil Company, Inc.Senior Staff Engineer, ElectricalJessup, MD$90,000–$154,100 / yearParticipate in New Product Introduction (NPI) project teams as an Electrical representative and Lead NPI electrical projects and provide technical support through the activities listed below: Translate product requirements and specifications into controls hardware designs requirements and design documents that meet product function needs and quality & cost targets. The Senior Staff Electrical Engineer will participate in New Product Introduction (NPI) project teams and lead hardware design and development for new product controls, participate in the development for controls (SMART) strategy and roadmap, and execute the controls roadmap.
NewElectrical Engineer II TAP EngineeringElectrical Engineer IIColumbia, MD$135,000–$210,000 / yearThis position requires strong technical leadership, sound engineering judgment, and close collaboration with cross-functional teams to deliver high-reliability hardware solutions. The ideal candidate brings deep experience in mixed-signal hardware design and thrives in a fast-paced environment supporting multiple concurrent programs.
NewElectrical Engineer TAP EngineeringElectrical EngineerColumbia, MD$110,000–$170,000 / yearThe Electrical Engineer supports Integrated Product Teams in the design, analysis, manufacture, and test of digital, RF/analog, and mixed electronics hardware at all levels of integration, spanning chip, component, printed circuit board, module/chassis, and system, across a multitude of platforms and domains including space, land, sea, air, and cyber. Experience resolving electronics hardware qualification and production failures, including debugging and performing root failure analysis on failed printed circuit boards.
NewElectrical Engineer, Radio Frequency QED Systems LLCElectrical Engineer, Radio FrequencyAberdeen Proving Ground, MD$80,000–$115,000 / yearJob Description QED Systems, LLC, is currently recruiting an Electrical Engineer, Radio Frequency, to join our team at Aberdeen Proving Ground, MD to support our C5ISR Positioning, Navigation, and Timing (PNT) Division contract. This position may be performed in a variety of locations, including but not limited to, commercial and/or government offices, test and integration labs, government facilities and depots, and test & evaluation and proving grounds.
NewElectrical Engineer BlackSea TechnologiesElectrical EngineerCurtis Bay, MD$40–$52 / hourWork efforts will range from initial system power and data layout diagrams, component selection, power budgets, circuit protection design, computing and network layouts, iteration of these systems as the design evolves, guidance for technicians during system installation and debugging procedures, and proceed to system testing. Blacksea Technologies is seeking an electrical engineer to work on a variety of tasks related to design, integration, and testing of prototype systems in commercial and military machinery systems.
NewSenior Test Engineer DCS CorporationSenior Test EngineerAberdeen, MD$123,639–$222,211 / yearAssists in coordinating and conducting functional tests for Tactical Operations Centers (TOCs) in support of the Army PM; Assists in summarizing, documenting, and reporting various C5ISR/TOC test data and results to stakeholders; Participate in TOC working groups and materiel development meetings to assist in developing coordinated fielding and testing schedules; Assists in developing and producing Test Design Plans for TOC testing and other PEO IEWS programs and transformation initiatives. Pay Range and Benefits: There are a variety of factors that can influence salary at DCS Corp, including but not limited to, geographic location, Federal Government contract labor categories and wage rates, relevant prior work experience, specific skills and competencies, education, and certifications.
Network Engineer ECLARONetwork EngineerColumbia, MDThis is an excellent opportunity for an Engineer looking to gain hands-on experience supporting enterprise networking projects while expanding their technical skills alongside experienced network architects. This individual will work under the guidance of a Senior CCIE-Level Engineer, assisting with network upgrades, switch deployments, and Meraki camera initiatives across multiple locations.
NewElectrical Engineer, Infrastructure Design JobotElectrical Engineer, Infrastructure DesignBaltimore, MD$120,000–$150,000 / yearInformation collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. We are a Full-Service Engineering company that specializes in providing design and engineering services for all aspects of building and utility infrastructure construction.
NewSenior Staff AI Engineer Renesas ElectronicsSenior Staff AI EngineerColumbia, MD$139,500–$185,000 / yearAs the industry’s leading expert in embedded processing with unmatched quality and system-level know-how, we have evolved to provide scalable and comprehensive semiconductor solutions for automotive, industrial, infrastructure, and IoT industries based on the broadest product portfolio, including High Performance Computing, Embedded Processing, Analog & Connectivity, and Power. Develop and maintain edge AI based applications, demos and solutions combining tiny ML models in a wide variety of physical hardware settings, including consumer devices, industrial machines and automotive.
NewMechanical Engineer II TAP EngineeringMechanical Engineer IIColumbia, MD$130,000–$200,000 / yearThe Mechanical Engineer II will play a key role in supporting Integrated Product Teams across the full product lifecycle, including design, analysis, prototyping, testing, and sustainment of digital, RF/analog, and mixed-signal electronics hardware. This role is ideal for a mid-level engineer with a strong background in thermal engineering, mechanical design, and electronics packaging, who can work independently while collaborating closely with cross-functional engineering teams.
NewMechanical Engineer TAP EngineeringMechanical EngineerColumbia, MD$100,000–$140,000 / yearThe Mechanical Engineer will support Integrated Product Teams in the design, analysis, manufacture, and testing of digital, RF/analog, and mixed-signal electronics hardware across multiple levels of integration, including chip, PCB, module, chassis, and system-level designs. This role is well-suited for an early-career engineer who enjoys hands-on work, technical problem-solving, and collaborating with cross-functional engineering teams.
NewLead Systems Engineer DCS CorporationLead Systems EngineerAberdeen, MD$123,639–$222,211 / yearSustainment and refreshment of capabilities; Configuration management, planning and strategy meetings, program review and coordination meetings; General systems engineering, systems implementation planning and system test and evaluation services; Prepare specifications, plans, analyses, modeling, testing, simulations and reports; Review engineering output in the areas of systems level operation and maintenance procedures, performance improvements criteria, tools assessments, metrics management, quality assurance, configuration management, technical orders, and maintenance practices; Conduct systems engineering trade-off analysis; Provides analysis related to the design, development, and integration of hardware, software, man-machine interfaces and all the systems level requirements to provide an integrated solution. Pay Range and Benefits: There are a variety of factors that can influence salary at DCS Corp, including but not limited to, geographic location, Federal Government contract labor categories and wage rates, relevant prior work experience, specific skills and competencies, education, and certifications.