Construction Inspector (TET III – TET V) Whitman, Requardt & Associates, LLPConstruction Inspector (TET III – TET V)Baltimore, MD$20–$70 / hourFull timeCandidates must also have all applicable MARTCP certificates (based on contract assignment type), Must have a current SHA Temporary Traffic Control Manager’s Training Course Card (or secure the same prior to work assignment) as well as MDE RPC Card and SHA E&S Yellow Card. All assigned personnel must also complete OSHA 10 hour training (training paid by WRA) and assist with completion of OOC Resume Packages for SHA approval prior to assignment to contracts.
NewConstruction Inspector (TET II – TET V) Whitman, Requardt & Associates, LLPConstruction Inspector (TET II – TET V)Baltimore, MD$20–$70 / hourFull timeCandidates must also have all applicable MARTCP certificates (based on contract assignment type), Must have a current SHA Temporary Traffic Control Manager’s Training Course Card (or secure the same prior to work assignment) as well as MDE RPC Card and SHA E&S Yellow Card. All assigned personnel must also complete OSHA 10 hour training (training paid by WRA) and assist with completion of OOC Resume Packages for SHA approval prior to assignment to contracts.
Inspection/Building Envelope Consultant - Annapolis Junction, MD Hillis-Carnes Engineering Associates IncInspection/Building Envelope Consultant - Annapolis Junction, MDAnnapolis Junction, MDExperience working on elevated work platforms and walking surfaces including ground supported and suspended scaffolding as well as aerial boom and scissor lifts associated with access of mid- to high-rise building facades and roofs. General Duties and Responsibilities: Participate independently and as part of a team in the performing various building diagnostics, including: but are not limited to, building envelope assessments, roofing- faade- waterproofing condition assessment, litigation support, field testing, and distress studies.
Trade Code Inspection & Enforcement Officer Baltimore County MarylandTrade Code Inspection & Enforcement OfficerTowson, MD$55,613–$63,517 / yearLongevity Increases - In accordance with the specific pay schedule, a full-time merit or classified employee may receive a longevity increase, equivalent to one step, upon completion of a certain number of years of classified service with the County. Membership in Baltimore County Employees Federal Credit Union offers a full range of savings programs, loans, checking, direct deposit, payroll deduction, savings bonds, and other financial services.
NewReceiving & Inspection Technician Quantum SpaceReceiving & Inspection TechnicianRockville, Marylandp>To comply with U.S. Government space technology export regulations, including ITAR, applicants must be a U.S. citizen, lawful permanent resident, protected individual per 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Quantum Space is seeking a hands-on Receiving and Inspection Technician to support shipping, receiving, incoming hardware inspection, inventory control, and material flow for spacecraft development and manufacturing.
Inspection/Building Envelope Consultant Hillis-CarnesInspection/Building Envelope ConsultantAnnapolis Junction, MDExperience working on elevated work platforms and walking surfaces including ground supported and suspended scaffolding as well as aerial boom and scissor lifts associated with access of mid- to high-rise building facades and roofs. Working knowledge of building enclosure systems, including more in-depth experience in one or more of the following: roofing, wall claddings, glazed assemblies, waterproofing, hygrothermal modeling, and building enclosure diagnostic testing.
Lead Technician, Inspection WSP Global IncLead Technician, InspectionBaltimore, MDDeveloped critical thinking and problem-solving skills required to apply learned subject matter and technical knowledge to reach conclusions from testing results, data collation, statistical analysis and arriving at the most effective, economical, and logical solution. Any unsolicited resumes, including those submitted to hiring managers or other business leaders, will become the property of WSP and WSP will have the right to hire that candidate without reservation - no fee or other compensation will be owed or paid to the recruiter, employment agency, or other staffing service.
Bridge Inspection Team Leader Suyash Consulting LLCBridge Inspection Team LeaderColumbia, MDJoin SuYash Consulting, LLC as a Bridge Inspection Team Leader and lead a dynamic team dedicated to ensuring the safety and integrity of our infrastructure. Our clients appreciate our innovative solutions and dedication to quality, while our employees thrive in a supportive and collaborative work environment that fosters professional growth.
Plumbing Trade Code Inspection & Enforcement Officer Baltimore County MarylandPlumbing Trade Code Inspection & Enforcement OfficerTowson, MD$55,613–$63,517 / yearp>Longevity Increases - In accordance with the specific pay schedule, a full-time merit or classified employee may receive a longevity increase, equivalent to one step, upon completion of a certain number of years of classified service with the County. Membership in Baltimore County Employees Federal Credit Union offers a full range of savings programs, loans, checking, direct deposit, payroll deduction, savings bonds, and other financial services.
Contracts/Inspection Manager ARK SystemsContracts/Inspection ManagerColumbia, MDAre you an experienced Contracts/Inspection Manager looking to take the next step in your career with a stable company offering excellent benefits and competitive pay? Perform all necessary supervisory functions to effectively and efficiently manage the personnel assigned (system inspectors and support staff as applicable).
Program Manager II (Field Supervisor - Fire Protection & Electrical Inspections), Grade N25 Montgomery County, MarylandProgram Manager II (Field Supervisor - Fire Protection & Electrical Inspections), Grade N25Rockville, MD$83,556–$134,086 / yearThis person will need technical knowledge and interpersonal skills to manage and lead a team of inspectors with varying experience and abilities, and to collaborate with a wide range of stakeholders, including property owners, contractors, design professionals, other inspectors, and County and state officials. This position REQUIRES the possession of a valid driver's license from the applicant's state of residence and the ability to drive a county vehicle to attend meetings, transport materials, or perform work at locations outside the office, which include locations throughout Montgomery County.
Inspection Operator II General Dynamics Ordnance and Tactical Systems IncInspection Operator IIRed Lion, PARequired education and experience: High School Diploma/GED required and 2-4 years'' experience OR Equivalent Combination of Relevant Education &/or Experience. We invite you to apply to join our team of employees who are dedicated to excellence that meet the needs of the warfighters and our customers around the world, day in and day out.
Inspection Operator I General Dynamics Ordnance and Tactical Systems IncInspection Operator IRed Lion, PA_____The above statements describe the general nature and level of work only. Required education and experience: High School Diploma/GED required and 0-3 years'' experience OR Equivalent Combination of Relevant Education &/or Experience.
Inspection Technician II General Dynamics Ordnance and Tactical Systems IncInspection Technician IIRed Lion, PA_____The above statements describe the general nature and level of work only. We invite you to apply to join our team of employees who are dedicated to excellence that meet the needs of the warfighters and our customers around the world, day in and day out.
Contracts/Inspection Manager ARK SYSTEMS, INC.Contracts/Inspection ManagerColumbia, MDp>Are you an experienced Contracts/Inspection Manager looking to take the next step in your career with a stable company offering excellent benefits and competitive pay? Perform all necessary supervisory functions to effectively and efficiently manage the personnel assigned (system inspectors and support staff as applicable).
Inspection Technician II General Dynamics Ordnance & Tactical SystemsInspection Technician IIRed Lion, PennsylvaniaRequired Qualifications: Required education and experience: Vocational/Technical Training Degree and 1-2 years' experience OR Equivalent Combination of Relevant Education &/or Experience. We invite you to apply to join our team of employees who are dedicated to excellence that meet the needs of the warfighters and our customers around the world, day in and day out.
Inspection Operator I General Dynamics Ordnance & Tactical SystemsInspection Operator IRed Lion, Pennsylvaniali> Required Qualifications: Required education and experience: High School Diploma/GED required and 0-3 years' experience OR Equivalent Combination of Relevant Education &/or Experience. We invite you to apply to join our team of employees who are dedicated to excellence that meet the needs of the warfighters and our customers around the world, day in and day out.
Inspection Operator I General Dynamics CorpInspection Operator IRed Lion, PAul>Required education and experience: High School Diploma/GED required and 0-3 years' experience OR Equivalent Combination of Relevant Education &/or Experience. We invite you to apply to join our team of employees who are dedicated to excellence that meet the needs of the warfighters and our customers around the world, day in and day out.
Inspection Technician II General Dynamics CorpInspection Technician IIRed Lion, PAWe invite you to apply to join our team of employees who are dedicated to excellence that meet the needs of the warfighters and our customers around the world, day in and day out. Required education and experience: Vocational/Technical Training Degree and 1-2 years' experience OR Equivalent Combination of Relevant Education &/or Experience.
Solar Inspections Technician Trinity Solar IncSolar Inspections TechnicianHanover, MDp>Trinity Solar, the Northeasts largest privately owned solar integrator, is seeking a motivated and detail-oriented Solar Inspection Technician to join our growing team. In this role, you will be responsible for supporting and facilitating solar inspections to ensure installations meet all local codes and compliance requirements.
Director of Inspections, Licenses and Permits (Appointed/FT/Benefits) Harford County MDDirector of Inspections, Licenses and Permits (Appointed/FT/Benefits)Bel Air, MarylandCertifications, Licensures, and Examinations: Certified ICC Residential Building Inspector (Preferred); ICC Residential Plans Reviewer (Preferred); ICC IBC Plans Reviewer (Preferred); ICC IBC Inspector (Preferred); ICC Residential Energy Inspector (Preferred); ICC Commercial Energy Inspector (Preferred). Directs through subordinates the examination of plans for new and existing buildings and structures to ensure conformity with the building code, fire code and related ordinances; permit review and processing; and inspection and enforcement activities.
Director of Inspections, Licenses and Permits (Appointed/FT/Benefits) HCG Harford County, MarylandDirector of Inspections, Licenses and Permits (Appointed/FT/Benefits)Bel Air, MarylandCertifications, Licensures, and Examinations: Certified ICC Residential Building Inspector (Preferred); ICC Residential Plans Reviewer (Preferred); ICC IBC Plans Reviewer (Preferred); ICC IBC Inspector (Preferred); ICC Residential Energy Inspector (Preferred); ICC Commercial Energy Inspector (Preferred). Job Description Summary: Under administrative supervision, this position serves as the Building Official for the County.Public Works Electrical and SCADA Inspection ROSS TECHNICAL SERVICES, INCPublic Works Electrical and SCADA InspectionBaltimore, MDAbility to maintain all required construction management documentation for both new installations and rehabilitation of existing water/wastewater collection, distribution, transmission systems, and facilities. · At least six (6) years of experience in performing electrical inspection work on water and wastewater systems, facilities, and associated structures.WWW Sewerline Video Inspection Technician- Department of Public Works City of BaltimoreWWW Sewerline Video Inspection Technician- Department of Public WorksBaltimore, MD$47,699–$77,744 / yearp>Job Summary: A Sewerline Video Inspection Technician leads subordinate workers in the inspection of sewerlines for leaks, breaks, clogs and damage using video inspection equipment. Licenses, Registrations, and Certificates: Have a valid Maryland Class C Noncommercial driver's license or an equivalent driver's license and eligible to obtain a Baltimore City driver's permit.Director of Inspections, Licenses and Permits (Appointed/FT/Benefits) Harford County, MDDirector of Inspections, Licenses and Permits (Appointed/FT/Benefits)MD$130,000–$150,000 / yearp>Certifications, Licensures, and Examinations: Certified ICC Residential Building Inspector (Preferred); ICC Residential Plans Reviewer (Preferred); ICC IBC Plans Reviewer (Preferred); ICC IBC Inspector (Preferred); ICC Residential Energy Inspector (Preferred); ICC Commercial Energy Inspector (Preferred). Directs through subordinates the examination of plans for new and existing buildings and structures to ensure conformity with the building code, fire code and related ordinances; permit review and processing; and inspection and enforcement activities.Self-Directed Occupancy Inspection Technician FAR InspectionsSelf-Directed Occupancy Inspection TechnicianBel Air South, MD$25–$35 / hourFire Alarm Assistant Inspection Technician ARK SYSTEMS, INC.Fire Alarm Assistant Inspection TechnicianMDi.e., test flow switches, tamper valves, low temp devices, smoke detectors, duct detectors, pull stations, fire doors, heat detectors, annunciators, hi-low air switches, communicators, fire and security alarm control panels, etc.). Duties/Responsibilities: Assist Lead Inspector while they test electronic alarm systems consisting of fire, security, access, sprinkler, etc.Bridge Inspection Team Leader AECOMBridge Inspection Team LeaderHunt Valley, MD$100,000–$160,000 / yearWe invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. **ReqID:** J10149896 **Business Line:** Transportation **Business Group:** DCS **Strategic Business Unit:** East **Career Area:** Engineering **Work Location Model:** Hybrid **Compensation:** USD 100000 - USD 160000 - yearlyPDS Security Compliance/Inspection Specialist Johns Hopkins University Applied Physics Laboratory LLCPDS Security Compliance/Inspection SpecialistLaurel, MDp>We are ranked as one of Computerworld's Top Places to Work in IT six years running, and we are seeking a PDS Security Compliance/Inspection Specialist who will play an instrumental role in the design, implementation, and oversight of secure PDS infrastructures supporting national security systems. APL provides eligible staff with a comprehensive benefits package including retirement plans, paid time off, medical, dental, vision, life insurance, short-term disability, long-term disability, flexible spending accounts, education assistance, and training and development.Claim Specialist - Property Field Inspection State FarmClaim Specialist - Property Field InspectionLaurel, MD$64,965.62–$99,000 / yearCompetitive candidates should reside within one of the listed zip codes and will service this same territory: 20701 20705 20706 20708 20710 20715 20716 20720 20721 20724 20737 20740 20742 20755 20769 20770 20771 20781 20783 20784 20785 21114 21054 20001 20099 20201 20599. With the opportunity to initially earn up to 20 days annually plus parental leave, paid holidays, celebration day, life leave (40 hours/year), bereavement leave, and community service/education support days, there will be plenty of time for you!PDS Security Compliance/Inspection Specialist Johns Hopkins Applied Physics LaboratoryPDS Security Compliance/Inspection SpecialistLaurel, Marylandp style="margin:0px">We are ranked as one of Computerworld's Top Places to Work in IT six years running, and we are seeking a PDSSecurity Compliance/Inspection Specialist who will play an instrumental role in the design, implementation, and oversight of secure PDS infrastructures supporting national security systems. As a PDS Security Compliance / Inspection Specialist, you will support the PDS Manager/Owner in the inspection, maintenance, compliance, and operational oversight of Protected Distribution Systems (PDS) supporting classified National Security Systems (NSS).Quality Inspector Actalent IncQuality InspectorJessup, MD$19–$20 / hourIf you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market.Quality Inspector II Mercury Systems IncQuality Inspector IIColumbia, MDli>Typically requires 3+ years of experience in quality assurance of electro -mechanical (circuit card assembly) , bare PCB, mechanical Enclosures inspection in a manufacturing environment. Job Responsibilities: Ensuring quality at a production line level by incorporating spot-inspection, sampling, 1st-piece verification and 100% inspection as required.QA/QC Inspector I DanaherQA/QC Inspector INottingham, Marylandp>For candidates who are based outside of New York City or who are applying for roles outside of New York City, for more information about conditions of any job offer please click here. At Pall Corporation, one of Danaher’s 15+ operating companies, our work saves lives—and we’re all united by a shared commitment to innovate for tangible impact.Construction Field Inspectors - Jr., Mid & Sr. Cornerstone ConciliumConstruction Field Inspectors - Jr., Mid & Sr.Baltimore, MD$56,000–$65,829 / yearBachelor’s degree in Civil or Structural or Geotechnical or Environmental or Electrical or Mechanical or Industrial Engineering, or Construction Management, or a related field is preferred. Key Responsibilities: Inspection and Compliance: Conduct thorough inspections of construction sites to ensure compliance with building codes, safety regulations, and project specifications.Paving Inspector - Maryland CES ConsultingPaving Inspector - MarylandMillersville, MDSenior Incoming Quality Control Inspector Rocket Lab CorpSenior Incoming Quality Control InspectorMiddle River, MD$32–$40 / hourImportant information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope.Incoming Quality Control IQC Inspector III - Mechanical Rocket Lab CorpIncoming Quality Control IQC Inspector III - MechanicalMiddle River, MD$26–$33 / hourp>Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope.Senior Incoming Quality Control Inspector Rocket Lab CorporationSenior Incoming Quality Control InspectorMiddle River, MD$32–$40 / hourFor more information on these Regulations, click here ITAR Regulations.. Learn more about ITAR here..Incoming Quality Control (IQC) Inspector III – Mechanical Rocket Lab CorporationIncoming Quality Control (IQC) Inspector III – MechanicalMiddle River, MD$26–$33 / hourFor more information on these Regulations, click here ITAR Regulations.. Learn more about ITAR here..Inspector Final Assembly Sr Specialist Lockheed Martin CorpInspector Final Assembly Sr SpecialistSevern, MD$73,500–$129,605 / yearp>Pay Rate: The annual base salary range for this position in California, Massachusetts, and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $73,500 - $129,605. Experience using Electro/Mechanical hand-held inspection equipment, Microscopes/magnifiers along with general office equipment including PC/laptop, Fax, Copiers, Shredder, Printers, Telephone, and other miscellaneous office equipment.Senior Incoming Quality Control Inspector Rocket Lab USASenior Incoming Quality Control InspectorMiddle River, MD$32–$40 / hourFull timeWHAT YOU’LL GET TO DO: Inspect incoming flight hardware and verify compliance with engineering drawings and specifications Review documentation packages and ensure all required paperwork is complete and accurate Evaluate drawing requirements and initiate NCRs for any nonconformances Perform mechanical inspections using calipers, micrometers, and other precision measurement tools Apply GD&T principles and interpret engineering blueprints Support inspection of composite components and large structures Work in a fast paced environment that may require long days and weekend support YOU’LL BRING THESE QUALIFICATIONS: 8+ years of experience in aerospace or equivalent inspection High school diploma or equivalent Strong understanding of GD&T and blueprint interpretation Proficiency with mechanical measurement tools (calipers, micrometers, etc.) Ability to inspect incoming flight hardware and review documentation packages Experience evaluating drawing requirements and issuing NCRs Ability to work in a fastpaced environment with extended hours as needed THESE QUALIFICATIONS WOULD BE NICE TO HAVE: Experience with CMM and laser tracker systems Familiarity with Inspire and PolyWorks software Experience with NDT scanning Background performing critical alignments on large structures Experience working with composite materials ADDITIONAL REQUIREMENTS: Sit at desk and operate computer, keyboard and office equipment for extended periods Use hands with dexterity to operate controls, tools and technical equipment, as needed Read technical documents, drawings, and computer screens requiring close and distance vision Move between buildings, labs, and work areas, as needed Work in office and technical environments with occasional exposure to noise, dust and fumes in production areas. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable.Incoming Quality Control (IQC) Inspector III – Mechanical Rocket Lab USAIncoming Quality Control (IQC) Inspector III – MechanicalMiddle River, MD$26–$33 / hourFull timeWHAT YOU’LL GET TO DO: Inspect incoming flight hardware and verify compliance with engineering drawings and specifications Review documentation packages and ensure all required paperwork is complete and accurate Evaluate drawing requirements and initiate NCRs for any non‑conformances Perform mechanical inspections using calipers, micrometers, and other precision measurement tools Apply GD&T principles and interpret engineering blueprints Support inspection of composite components and large structures Work in a fast‑paced environment that may require long days and weekend support YOU’LL BRING THESE QUALIFICATIONS: 5+ years of experience in aerospace or equivalent inspection High school diploma or equivalent Strong understanding of GD&T and blueprint interpretation Proficiency with mechanical measurement tools (calipers, micrometers, etc.) Ability to inspect incoming flight hardware and review documentation packages Experience evaluating drawing requirements and issuing NCRs Ability to work in a fast‑paced environment with extended hours as needed THESE QUALIFICATIONS WOULD BE NICE TO HAVE: Experience with CMM and laser tracker systems Familiarity with Inspire and PolyWorks software Experience with NDT scanning Background performing critical alignments on large structures Experience working with composite materials ADDITIONAL REQUIREMENTS: Sit at desk and operate computer, keyboard and office equipment for extended periods Use hands with dexterity to operate controls, tools and technical equipment, as needed Read technical documents, drawings, and computer screens requiring close and distance vision Move between buildings, labs, and work areas, as needed Work in office and technical environments with occasional exposure to noise, dust and fumes in production areas. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable.Maryland State Inspector - $7,500 Bonus CarvanaMaryland State Inspector - $7,500 BonusBaltimore, MD$30–$35 / hourWe have a variety of Technician roles in our Inspection Centers, depending on your level of experience - take a look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers: Entry-Level Auto Technician (min 6 months professional experience): perform light maintenance, fluid checks, and/or conduct the initial inspection on our vehicles to look for any imperfections or repairs that may be needed throughout the reconditioning process. We also have a variety of other automotive roles available in one of our 17 locations across the country – take a look at our Careers site to apply for one of the following roles: Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles.Resident Inspector DM EnterprisesResident InspectorLaurel, MDThe successful candidate will act as the Owner’s Representative, overseeing field inspection activities, monitoring construction progress, ensuring quality assurance, and verifying compliance with project plans, specifications, schedules, and applicable regulations. This role requires strong coordination with field inspectors, contractors, and project management teams, as well as experience reviewing construction documentation, quantities, submittals, RFIs, and payment estimates.Inspector I WSP Global IncInspector IColumbia, MD$27–$29 / hourAny unsolicited resumes, including those submitted to hiring managers or other business leaders, will become the property of WSP and WSP will have the right to hire that candidate without reservation - no fee or other compensation will be owed or paid to the recruiter, employment agency, or other staffing service. WSP USA is providing the compensation range that the company in good faith believes it might pay and offer for this position, based on the successful applicant's education, experience, knowledge, skills, abilities in addition to internal equity and specific geographic location.Quality Inspector Textron IncQuality InspectorHunt Valley, MD$48,400–$71,200 / hourBenefits may include health insurance and prescription plan coverage, dental insurance, family building benefits, vision insurance, mental health resources, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and programs that provide employees time away from work. We believe people should love what they do - in this role, you will be responsible for Quality Inspection: Primary Function: To perform checks, tests, gauging, and instrument inspections of materials, goods in process, and finished goods.NDE Inspector Starship Space Exploration Technologies CorpNDE Inspector StarshipWestminster, MD$25–$33.50 / hourp>PREFERRED SKILLS AND EXPERIENCE: Additional nondestructive evaluation Level II OR III certifications in line with ASNT TC-1A, NAS-410, or DOD guidance in one of the following methods: Eddy current (ET), radiography (RT), digital radiography (DR), dye penetrant (PT), visual inspection (VT), computed radiography (CR), phase array (PAUT), ultrasonic (UT), ultrasonic shear wave (UTSW), or magnetic particle (MT). Nondestructive Evaluation Level II certification in line with ASNT TC-1A, NAS-410, or DOD guidance in one of the following methods: eddy current (ET), radiography (RT), digital radiography (DR), dye penetrant (PT), visual inspection (VT), computed radiography (CR), phase array (PAUT), ultrasonic (UT), ultrasonic shear wave (UTSW), or magnetic particle (MT).Maryland State Inspector - $7,500 Bonus Carvana CoMaryland State Inspector - $7,500 BonusBaltimore, MD$30–$35 / hourp>We have a variety of Technician roles in our Inspection Centers, depending on your level of experience - take a look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers: Entry-Level Auto Technician (min 6 months professional experience): perform light maintenance, fluid checks, and/or conduct the initial inspection on our vehicles to look for any imperfections or repairs that may be needed throughout the reconditioning process. We also have a variety of other automotive roles available in one of our 17 locations across the country - take a look at our Careers site to apply for one of the following roles: Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles.Construction Quality Control Inspector IQUASAR LLCConstruction Quality Control InspectorLaurel, MDReview contract deliverables and submittals for conformance and perform daily inspections to verify all work is in strict compliance with the contract, and request correction of any deficiencies. Minimum of 10 years construction management and/or craft supervision experience commercial or Government construction projects.12Resume ResourcesFree Resume TemplatesFree Resume Builder
Public Works Electrical and SCADA Inspection ROSS TECHNICAL SERVICES, INCPublic Works Electrical and SCADA InspectionBaltimore, MDAbility to maintain all required construction management documentation for both new installations and rehabilitation of existing water/wastewater collection, distribution, transmission systems, and facilities. · At least six (6) years of experience in performing electrical inspection work on water and wastewater systems, facilities, and associated structures.
WWW Sewerline Video Inspection Technician- Department of Public Works City of BaltimoreWWW Sewerline Video Inspection Technician- Department of Public WorksBaltimore, MD$47,699–$77,744 / yearp>Job Summary: A Sewerline Video Inspection Technician leads subordinate workers in the inspection of sewerlines for leaks, breaks, clogs and damage using video inspection equipment. Licenses, Registrations, and Certificates: Have a valid Maryland Class C Noncommercial driver's license or an equivalent driver's license and eligible to obtain a Baltimore City driver's permit.
Director of Inspections, Licenses and Permits (Appointed/FT/Benefits) Harford County, MDDirector of Inspections, Licenses and Permits (Appointed/FT/Benefits)MD$130,000–$150,000 / yearp>Certifications, Licensures, and Examinations: Certified ICC Residential Building Inspector (Preferred); ICC Residential Plans Reviewer (Preferred); ICC IBC Plans Reviewer (Preferred); ICC IBC Inspector (Preferred); ICC Residential Energy Inspector (Preferred); ICC Commercial Energy Inspector (Preferred). Directs through subordinates the examination of plans for new and existing buildings and structures to ensure conformity with the building code, fire code and related ordinances; permit review and processing; and inspection and enforcement activities.
Self-Directed Occupancy Inspection Technician FAR InspectionsSelf-Directed Occupancy Inspection TechnicianBel Air South, MD$25–$35 / hour
Fire Alarm Assistant Inspection Technician ARK SYSTEMS, INC.Fire Alarm Assistant Inspection TechnicianMDi.e., test flow switches, tamper valves, low temp devices, smoke detectors, duct detectors, pull stations, fire doors, heat detectors, annunciators, hi-low air switches, communicators, fire and security alarm control panels, etc.). Duties/Responsibilities: Assist Lead Inspector while they test electronic alarm systems consisting of fire, security, access, sprinkler, etc.
Bridge Inspection Team Leader AECOMBridge Inspection Team LeaderHunt Valley, MD$100,000–$160,000 / yearWe invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. **ReqID:** J10149896 **Business Line:** Transportation **Business Group:** DCS **Strategic Business Unit:** East **Career Area:** Engineering **Work Location Model:** Hybrid **Compensation:** USD 100000 - USD 160000 - yearly
PDS Security Compliance/Inspection Specialist Johns Hopkins University Applied Physics Laboratory LLCPDS Security Compliance/Inspection SpecialistLaurel, MDp>We are ranked as one of Computerworld's Top Places to Work in IT six years running, and we are seeking a PDS Security Compliance/Inspection Specialist who will play an instrumental role in the design, implementation, and oversight of secure PDS infrastructures supporting national security systems. APL provides eligible staff with a comprehensive benefits package including retirement plans, paid time off, medical, dental, vision, life insurance, short-term disability, long-term disability, flexible spending accounts, education assistance, and training and development.
Claim Specialist - Property Field Inspection State FarmClaim Specialist - Property Field InspectionLaurel, MD$64,965.62–$99,000 / yearCompetitive candidates should reside within one of the listed zip codes and will service this same territory: 20701 20705 20706 20708 20710 20715 20716 20720 20721 20724 20737 20740 20742 20755 20769 20770 20771 20781 20783 20784 20785 21114 21054 20001 20099 20201 20599. With the opportunity to initially earn up to 20 days annually plus parental leave, paid holidays, celebration day, life leave (40 hours/year), bereavement leave, and community service/education support days, there will be plenty of time for you!
PDS Security Compliance/Inspection Specialist Johns Hopkins Applied Physics LaboratoryPDS Security Compliance/Inspection SpecialistLaurel, Marylandp style="margin:0px">We are ranked as one of Computerworld's Top Places to Work in IT six years running, and we are seeking a PDSSecurity Compliance/Inspection Specialist who will play an instrumental role in the design, implementation, and oversight of secure PDS infrastructures supporting national security systems. As a PDS Security Compliance / Inspection Specialist, you will support the PDS Manager/Owner in the inspection, maintenance, compliance, and operational oversight of Protected Distribution Systems (PDS) supporting classified National Security Systems (NSS).
Quality Inspector Actalent IncQuality InspectorJessup, MD$19–$20 / hourIf you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market.
Quality Inspector II Mercury Systems IncQuality Inspector IIColumbia, MDli>Typically requires 3+ years of experience in quality assurance of electro -mechanical (circuit card assembly) , bare PCB, mechanical Enclosures inspection in a manufacturing environment. Job Responsibilities: Ensuring quality at a production line level by incorporating spot-inspection, sampling, 1st-piece verification and 100% inspection as required.
QA/QC Inspector I DanaherQA/QC Inspector INottingham, Marylandp>For candidates who are based outside of New York City or who are applying for roles outside of New York City, for more information about conditions of any job offer please click here. At Pall Corporation, one of Danaher’s 15+ operating companies, our work saves lives—and we’re all united by a shared commitment to innovate for tangible impact.
Construction Field Inspectors - Jr., Mid & Sr. Cornerstone ConciliumConstruction Field Inspectors - Jr., Mid & Sr.Baltimore, MD$56,000–$65,829 / yearBachelor’s degree in Civil or Structural or Geotechnical or Environmental or Electrical or Mechanical or Industrial Engineering, or Construction Management, or a related field is preferred. Key Responsibilities: Inspection and Compliance: Conduct thorough inspections of construction sites to ensure compliance with building codes, safety regulations, and project specifications.
Senior Incoming Quality Control Inspector Rocket Lab CorpSenior Incoming Quality Control InspectorMiddle River, MD$32–$40 / hourImportant information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope.
Incoming Quality Control IQC Inspector III - Mechanical Rocket Lab CorpIncoming Quality Control IQC Inspector III - MechanicalMiddle River, MD$26–$33 / hourp>Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope.
Senior Incoming Quality Control Inspector Rocket Lab CorporationSenior Incoming Quality Control InspectorMiddle River, MD$32–$40 / hourFor more information on these Regulations, click here ITAR Regulations.. Learn more about ITAR here..
Incoming Quality Control (IQC) Inspector III – Mechanical Rocket Lab CorporationIncoming Quality Control (IQC) Inspector III – MechanicalMiddle River, MD$26–$33 / hourFor more information on these Regulations, click here ITAR Regulations.. Learn more about ITAR here..
Inspector Final Assembly Sr Specialist Lockheed Martin CorpInspector Final Assembly Sr SpecialistSevern, MD$73,500–$129,605 / yearp>Pay Rate: The annual base salary range for this position in California, Massachusetts, and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $73,500 - $129,605. Experience using Electro/Mechanical hand-held inspection equipment, Microscopes/magnifiers along with general office equipment including PC/laptop, Fax, Copiers, Shredder, Printers, Telephone, and other miscellaneous office equipment.
Senior Incoming Quality Control Inspector Rocket Lab USASenior Incoming Quality Control InspectorMiddle River, MD$32–$40 / hourFull timeWHAT YOU’LL GET TO DO: Inspect incoming flight hardware and verify compliance with engineering drawings and specifications Review documentation packages and ensure all required paperwork is complete and accurate Evaluate drawing requirements and initiate NCRs for any nonconformances Perform mechanical inspections using calipers, micrometers, and other precision measurement tools Apply GD&T principles and interpret engineering blueprints Support inspection of composite components and large structures Work in a fast paced environment that may require long days and weekend support YOU’LL BRING THESE QUALIFICATIONS: 8+ years of experience in aerospace or equivalent inspection High school diploma or equivalent Strong understanding of GD&T and blueprint interpretation Proficiency with mechanical measurement tools (calipers, micrometers, etc.) Ability to inspect incoming flight hardware and review documentation packages Experience evaluating drawing requirements and issuing NCRs Ability to work in a fastpaced environment with extended hours as needed THESE QUALIFICATIONS WOULD BE NICE TO HAVE: Experience with CMM and laser tracker systems Familiarity with Inspire and PolyWorks software Experience with NDT scanning Background performing critical alignments on large structures Experience working with composite materials ADDITIONAL REQUIREMENTS: Sit at desk and operate computer, keyboard and office equipment for extended periods Use hands with dexterity to operate controls, tools and technical equipment, as needed Read technical documents, drawings, and computer screens requiring close and distance vision Move between buildings, labs, and work areas, as needed Work in office and technical environments with occasional exposure to noise, dust and fumes in production areas. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable.
Incoming Quality Control (IQC) Inspector III – Mechanical Rocket Lab USAIncoming Quality Control (IQC) Inspector III – MechanicalMiddle River, MD$26–$33 / hourFull timeWHAT YOU’LL GET TO DO: Inspect incoming flight hardware and verify compliance with engineering drawings and specifications Review documentation packages and ensure all required paperwork is complete and accurate Evaluate drawing requirements and initiate NCRs for any non‑conformances Perform mechanical inspections using calipers, micrometers, and other precision measurement tools Apply GD&T principles and interpret engineering blueprints Support inspection of composite components and large structures Work in a fast‑paced environment that may require long days and weekend support YOU’LL BRING THESE QUALIFICATIONS: 5+ years of experience in aerospace or equivalent inspection High school diploma or equivalent Strong understanding of GD&T and blueprint interpretation Proficiency with mechanical measurement tools (calipers, micrometers, etc.) Ability to inspect incoming flight hardware and review documentation packages Experience evaluating drawing requirements and issuing NCRs Ability to work in a fast‑paced environment with extended hours as needed THESE QUALIFICATIONS WOULD BE NICE TO HAVE: Experience with CMM and laser tracker systems Familiarity with Inspire and PolyWorks software Experience with NDT scanning Background performing critical alignments on large structures Experience working with composite materials ADDITIONAL REQUIREMENTS: Sit at desk and operate computer, keyboard and office equipment for extended periods Use hands with dexterity to operate controls, tools and technical equipment, as needed Read technical documents, drawings, and computer screens requiring close and distance vision Move between buildings, labs, and work areas, as needed Work in office and technical environments with occasional exposure to noise, dust and fumes in production areas. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable.
Maryland State Inspector - $7,500 Bonus CarvanaMaryland State Inspector - $7,500 BonusBaltimore, MD$30–$35 / hourWe have a variety of Technician roles in our Inspection Centers, depending on your level of experience - take a look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers: Entry-Level Auto Technician (min 6 months professional experience): perform light maintenance, fluid checks, and/or conduct the initial inspection on our vehicles to look for any imperfections or repairs that may be needed throughout the reconditioning process. We also have a variety of other automotive roles available in one of our 17 locations across the country – take a look at our Careers site to apply for one of the following roles: Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles.
Resident Inspector DM EnterprisesResident InspectorLaurel, MDThe successful candidate will act as the Owner’s Representative, overseeing field inspection activities, monitoring construction progress, ensuring quality assurance, and verifying compliance with project plans, specifications, schedules, and applicable regulations. This role requires strong coordination with field inspectors, contractors, and project management teams, as well as experience reviewing construction documentation, quantities, submittals, RFIs, and payment estimates.
Inspector I WSP Global IncInspector IColumbia, MD$27–$29 / hourAny unsolicited resumes, including those submitted to hiring managers or other business leaders, will become the property of WSP and WSP will have the right to hire that candidate without reservation - no fee or other compensation will be owed or paid to the recruiter, employment agency, or other staffing service. WSP USA is providing the compensation range that the company in good faith believes it might pay and offer for this position, based on the successful applicant's education, experience, knowledge, skills, abilities in addition to internal equity and specific geographic location.
Quality Inspector Textron IncQuality InspectorHunt Valley, MD$48,400–$71,200 / hourBenefits may include health insurance and prescription plan coverage, dental insurance, family building benefits, vision insurance, mental health resources, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and programs that provide employees time away from work. We believe people should love what they do - in this role, you will be responsible for Quality Inspection: Primary Function: To perform checks, tests, gauging, and instrument inspections of materials, goods in process, and finished goods.
NDE Inspector Starship Space Exploration Technologies CorpNDE Inspector StarshipWestminster, MD$25–$33.50 / hourp>PREFERRED SKILLS AND EXPERIENCE: Additional nondestructive evaluation Level II OR III certifications in line with ASNT TC-1A, NAS-410, or DOD guidance in one of the following methods: Eddy current (ET), radiography (RT), digital radiography (DR), dye penetrant (PT), visual inspection (VT), computed radiography (CR), phase array (PAUT), ultrasonic (UT), ultrasonic shear wave (UTSW), or magnetic particle (MT). Nondestructive Evaluation Level II certification in line with ASNT TC-1A, NAS-410, or DOD guidance in one of the following methods: eddy current (ET), radiography (RT), digital radiography (DR), dye penetrant (PT), visual inspection (VT), computed radiography (CR), phase array (PAUT), ultrasonic (UT), ultrasonic shear wave (UTSW), or magnetic particle (MT).
Maryland State Inspector - $7,500 Bonus Carvana CoMaryland State Inspector - $7,500 BonusBaltimore, MD$30–$35 / hourp>We have a variety of Technician roles in our Inspection Centers, depending on your level of experience - take a look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers: Entry-Level Auto Technician (min 6 months professional experience): perform light maintenance, fluid checks, and/or conduct the initial inspection on our vehicles to look for any imperfections or repairs that may be needed throughout the reconditioning process. We also have a variety of other automotive roles available in one of our 17 locations across the country - take a look at our Careers site to apply for one of the following roles: Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles.
Construction Quality Control Inspector IQUASAR LLCConstruction Quality Control InspectorLaurel, MDReview contract deliverables and submittals for conformance and perform daily inspections to verify all work is in strict compliance with the contract, and request correction of any deficiencies. Minimum of 10 years construction management and/or craft supervision experience commercial or Government construction projects.