72 Results for

Inspection Jobs in Mill Creek, WA

Jobs

Medina, WA

$26–$32 / hour

Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. Large interior aircraft parts manufacturer looking to grow our Quality team by adding an experienced Quality Specialist to the team.

8 days ago

Seattle, WA

Full time

While performing the duties of this job, physical demands of the employee may include frequent talking, hearing, standing, moving, walking, stooping, kneeling, crouching, crawling, reaching, handling, grasping, feeling, balancing, coordination, and occasional sitting or operating a company vehicle. • This field job primarily operates in outdoor work environments that may include exposure to inclement weather, heat, humidity, noise, hazard, atmospheric conditions, and bodies of water, depending on project requirements.

23 days ago

Seattle, WA

$150,000–$215,000 / year
Full time

21 days ago

Seattle, WA

$20–$40 / hour
Full time

Person" means (i) a U.S citizen or U.S. national; or (ii) any natural person who is a U.S. Lawful Permanent Resident (i.e., holds a Green Card), as defined by 8 U.S.C. 1101(a)(20) or as a "protected individual" defined by 8 U.S.C. 1324b(a)(3) (i.e., admitted as a refugee or is granted asylum). We are looking for a self-directed QC Inspector to own day-to-day incoming inspection of custom mechanical parts, verify supplier documentation, and build clean inspection records.

23 days ago

Seattle, WA

$115,000–$166,400 / year
Full time

Prepares accurate, complete, and timely Inspector Daily Reports (IDRs) documenting weather, manpower, equipment, work activities, locations, materials placed, quantities, testing performed, deficiencies, and discussions held with the contractor. Ramos CS, now a part of Colliers Engineering & Design, is actively hiring an Inspector to perform a wide variety of field inspection work on a transit capital program covering rail and bus construction scopes.

24 days ago

Port Orchard, WA

Full time

Ability to operate a personal computer and related word processing, permitting, and engineering software; perform complex and technical review of construction plans; perform a variety of inspections at construction sites; work independently with little direction; communicate effectively with the public, contractors, developers and co-workers, both orally and in writing; explain technical items and problems in a lay person’s terms, and read, interpret, apply, and explain regulations, codes plans, policies, and procedures. Conduct field inspections of construction projects to ensure compliance with the International Code Council (ICC) Building, Mechanical, Plumbing and Fire Codes, State Energy, Ventilation and Indoor Air Quality and Barrier Free Codes, as well as other state laws and City of Port Orchard Ordinances and policies.

30+ days ago

Mill Creek, WA

Full time

Actively follow instructions as required in all aspects of the work assignment and have a working knowledge of common inspection measuring equipment including, but not limited to, surface plates, micrometers, height gauges, radius gauges, protractors, profilometers, bore gauges, dial indicators, and Coordinate Measuring Machines. Good knowledge of common inspection measuring equipment including, but not limited to, surface plates, micrometers, height gauges, radius gauges, protractors, profilometers, bore gauges, dial indicators, and Coordinate Measuring Machines (running PCDMIS software).

30+ days ago

Lynnwood, WA

Full time

American Society for Nondestructive Testing (ASNT) Level III certification (Visual Testing (VT), Magnetic Particle Testing (MT), Dye Penetrant Testing (PT), Radiographic Testing (RT), Ultrasonic Testing (UT)). General Responsibilities: Construction Inspectors spend the majority of their time working on projects performing construction related inspection requiring specific certifications and/or experience.

23 days ago

Lynnwood, WA

Part time

23 days ago

Woodinville, WA

Full time

To comply with those regulations, this position may require applicants to be U.S. Persons (i.e., U.S. citizens, U.S. lawful permanent residents, protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required export authorizations from the U.S. Department of State or the U.S. Department of. This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)).

30+ days ago

Lynnwood, Washington

$101,817–$138,945 / year

Knowledge: Knowledge of Quality Management Systems as well as Process Improvement and Control Techniques; Demonstrated knowledge of manufacturing best practices, process control, logistics processes (inventory management), engineering management (project management) and safety management . Skills/Abilities: Demonstrated strong analytical and problem-solving skills; Effective written and verbal communication skills and interpersonal skills; Ability to manage through influence; Ability to demonstrate a strong sense of urgency .

30+ days ago

Kirkland, WA

$21.93–$29.67 / hour

Minimum Qualifications** **Education/Experience** + High school diploma or general education degree (GED) + Demonstrates **familiarity** (typically 1 year of direct experience in the duties, responsibilities and skills of the role for consideration as **Quality Inspector** . **Duties & Responsibilities** + Utilize complex measuring devices to perform inspections of purchased parts, materials, components, electronic hardware, and equipment as they are received from vendors or subcontractors, working primarily within the mechanical cell.

21 days ago

Kirkland, WA

$21.93–$29.67 / hour

Quality Inspector, Shipping Inspection (2026-075) Astronics Subsidiary Astronics Advanced Electronic Systems Location Kirkland, WA Description Astronics Advanced Electronic Systems (AES) is seeking a **Quality Inspector** for our **Shipping Inspection Group** . This role works from blueprints, engineering change notices, and established operating procedures to perform a wide range of inspection activities and to determine acceptance, rejection, or rework requirements at various stages of production.

21 days ago

Kirkland, WA

Working from blueprints, engineering change notices, and established operating procedures, you will bridge the gap between engineering specifications and finished hardware, ensuring the integrity of complex mechanical components throughout the production lifecycle. Precision Inspection: Utilize complex measuring devices to perform high-level verification of purchased parts, materials, components, and equipment received from vendors or subcontractors.

14 days ago

Kirkland, WA

$21.93–$29.67 / hour

Quality Inspector, Receiving Inspection (2026-077) Astronics Subsidiary Astronics Advanced Electronic Systems (AES) Location Kirkland, WA Description Astronics Advanced Electronic Systems (AES) is seeking a **Quality Inspector** for our **Receiving Inspection Group** . **Job Summary** The **Quality Inspector, Receiving Inspection** is responsible for performing incoming inspections of purchased parts, materials, components, electronic hardware, and equipment to ensure they meet Astronics AES quality, engineering, and customer requirements.

21 days ago

Lynnwood, WA

$101,817–$138,945 / year

Knowledge: Knowledge of Quality Management Systems as well as Process Improvement and Control Techniques; Demonstrated knowledge of manufacturing best practices, process control, logistics processes (inventory management), engineering management (project management) and safety management. Skills/Abilities: Demonstrated strong analytical and problem-solving skills; Effective written and verbal communication skills and interpersonal skills; Ability to manage through influence; Ability to demonstrate a strong sense of urgency.

30+ days ago

Everett, WA

Partner with Design, Build Reliability, Manufacturing, and Supplier Development Engineering teams to implement, improve, and sustain inspection processes, tooling, measurement methods, and documentation systems. Since Helions founding in 2013, we have raised over $1 billion from long-time investors such as Sam Altman, Mithril, and Capricorn Investment Group as well as new investors SoftBank and Lightspeed to propel us forward.

30+ days ago

Redmond, Washington

$36.47–$60.86 / hour

This role's primary function is to ensure Kleinfelder exceeds client expectations through frequent client communication, mentoring and managing Kleinfelder's local CoMET services team, planning and executing technical work, monitoring, and controlling project budgets, and working to expand our client base. From construction management and observation/inspection services to laboratory testing and materials and forensic engineering, our Construction Services market helps to develop and maintain America's infrastructure and supply chain and is a recognized industry leader with more than 25 accredited laboratories.  .

30+ days ago

Bellevue, Washington

At Qnity, we’re more than a global leader in materials and solutions for advanced electronics and high-tech industries – we’re a tight-knit team that is motivated by new possibilities, and always up for a challenge. Operational Excellence in our workplace unleashes the energy, creativity and collaboration – along with our tools, technology and training – that enables our people to perform at their best.

30+ days ago

Tukwila, WA

$80,000–$120,000 / year

The Fire Systems Inspection Manager is responsible for overseeing and managing all inspection activities related to fire sprinkler, fire alarm, and life safety systems, while also supporting revenue growth through new sales, customer retention, contract renewals, and identification of inspection- and deficiency-driven sales opportunities. COSCO Fire Protection is a multifaceted, full-service fire sprinkler and life safety systems company specializing in the installation, service, and inspection of a wide variety of automatic fire sprinkler systems, fire alarm (life safety) systems, kitchen suppression, extinguishers, and special hazard systems throughout the West Coast.

14 days ago

Tukwila, WA

$25–$30 / hour

We are seeking a motivated and engaging person who enjoys multi-tasking, learning on the job, and providing simultaneous support in a service and administrative capacity. Essential duties and responsibilities may include, but are not limited to, the following: Schedule inspections work orders to ensure they are completed on time.

14 days ago

Seattle, WA

$64,965.62–$99,000 / year

Competitive candidates should reside within one of the listed zip codes and will service this same territory: 98001, 98002, 98003, 98023, 98030, 98031, 98032, 98042, 98056, 98057, 98101, 98102, 98104, 98106, 98108, 98109, 98812, 98116, 98118, 98119, 98121, 98122, 98126, 98134, 98136, 98144, 98146, 98148, 98158, 98166, 98168, 98178, 98188, 98198, 98199. With the opportunity to initially earn up to 20 days annually plus parental leave, paid holidays, celebration day, life leave (40 hours/year), bereavement leave, and community service/education support days, there will be plenty of time for you!

3 days ago

Everett, Washington

$107,000–$142,000 / year

This position is located in Mt Vernon/Everett, WA and responsible for leading a team who services these zip codes: 98201 98203 98206 98220 98221 98222 98223 98225 98226 98229 98230 98232 98233 98235 98236 98237 98238 98239 98240 98241 98243 98244 98245 98247 98248 98249 98250 98252 98253 98255 98257 98258 98260 98261 98262 98263 98264 98266 98267 98270 98271 98273 98274 98276 98277 98278 98279 98280 98281 98282 98283 98284 98286 98287 98290 98292 98295 98297. With the opportunity to initially earn up to 20 days annually plus parental leave, paid holidays, celebration day, life leave (40 hours/year), bereavement leave, and community service/education support days, there will be plenty of time for you!

3 days ago

Seattle, Washington

Over 30 years, SQA Services has been a premier leader in the provision of managed supplier quality services for audits, assessments, remote surveillance assessments, corrective actions, remediation, inspections, and engineering to manufacturers within all industries. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information.

17 days ago

Marysville, Washington

$21–$21

Have a sincere desire to work and be able to work independently or with a team to complete tasks in a timely manner.2+ years relevant, steady work history is preferred, manufacturing a plus. Job duties include but are not limited to:Inspection of incoming products to ensure proper paperwork is received and parts conform to specifications, engineering and purchase order.

30+ days ago

Seattle, Washington

Known as North America’s largest home inspection company, Pillar To Post provides comprehensive training, proven systems, advanced tools, and strong internal support to help inspectors succeed. As a Residential Home Inspector, you will help home buyers, sellers, and real estate professionals make informed decisions by delivering thorough, high-quality inspections and detailed reports.

30+ days ago

Marysville, Washington

$18.90–$29.70

Inspection of incoming products to ensure proper paperwork is received and parts conform to specifications, engineering and purchase order. Inspects sub-assemblies used in the construction of aircraft interiors and all final products prior to shipment.

30+ days ago

Marysville, Washington

$17.19–$27.01

Other Skills: Ability to use precision measuring instruments and to read engineering drawings, specifications and other technical literature is preferred. Inspection of incoming products to ensure proper paperwork is received and parts conform to specifications, engineering and purchase order.

30+ days ago

Redmond, WA

$30.39–$50.72 / hour

From construction management and observation/inspection services to laboratory testing and materials and forensic engineering, our Construction Services market helps to develop and maintain America''s infrastructure and supply chain and is a recognized industry leader with more than 25 accredited laboratories. Kleinfelder, a long-standing industry leader in the Puget Sound area, provides Transportation Quality Assurance Inspection and Testing Services to transportation agency clients in Washington State.

30+ days ago

Seattle, WA

$190,000–$195,000 / year

Implement construction inspection, testing, and contract compliance programs on small and major public works projects in and around transit facilities; this work involves inspections of construction activities, materials, equipment, and machinery installation with occasional system start-up and commissioning. Inspect construction activities including trackwork, civil structures, concrete works, and associated rail infrastructure components; verify compliance with approved construction drawings, specifications, method statements, and inspection test plans (ITPs).

30+ days ago

Redmond, WA

$25–$33 / hour

PREFERRED SKILLS AND EXPERIENCE: • Understanding of ISO 9001/AS9100 quality management systems • Solid computer skills in Microsoft Word, Outlook and Excel • Ability to review drawings and identify improper callouts/datum structures, according to ASME Y14.5 • Thorough understanding of all layout inspection tools (surface plate, height gage, indicators, calipers, micrometers, gage blocks, thread gages, etc.). BASIC QUALIFICATIONS: High school diploma or equivalency certificate 2+ years of quality inspection experience in a machine shop or manufacturing environment 1+ years of experience with blueprint reading and/or GD&T (geometric dimensioning and tolerancing).

30+ days ago

Redmond, WA

$25–$33 / hour

unassisted + Must be able to stand for extended periods - 8 hours min + Willingness to work overtime and weekends when needed to meet critical deadlines + Up to 50% travel COMPENSATION AND BENEFITS: Pay range: Quality Inspector/Level 1: $25.00 - $33.00/hour Quality Inspector/Level 2: $30.00 - $39.00/hour Quality Inspector/Level 3: $35.00 - $45.00/hour ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

30+ days ago

Kirkland, WA

$24.52–$36.79 / hour

The Senior / Specialist Quality Inspector will work from blueprints, engineering change notices, or established operating procedures to perform a wide range of inspection procedures and determine acceptance, rejection, or rework requirements at various stages of production. Utilize complex measuring devices to perform inspections of purchased parts, materials, components, electronic hardware, and equipment as they are received from vendors or subcontractors, working primarily within the mechanical cell.

30+ days ago

Port Townsend, WA

$34.04–$38.52 / hour

Eight years' experience performing construction-related work or inspection in related fields, or any combination of education and experience equivalent to at least eight years of construction management and inspection experience. The City of Port Townsend is recruiting to fill one vacancy for a Public Works Plans Reviewer/Inspector, who can be hired at the I, II, or III level depending on qualifications.

4 days ago

Redmond, WA

Is responsible for conducting incoming receiving inspections to IPC-A-610 class 3. Performs first article inspections (FAI) to AS9100, line inspections, finished goods and pack out inspections and audits on electronic, mechanical, and optic systems, subassemblies, and parts to ensure said items meet critical specifications. Understands and follows inspection plans, work orders, test manuals, performance specifications, wiring diagrams, shop drawing prints and schematics to determine, validate or comply with specification, testing procedure and equipment to be used.

23 days ago

Everett, WA

$37,800–$59,400 / hour

Reference number** 2025-160817 **Job details** **Domain** Production **Job field / Job profile** Quality - development quality assurance (design / industrial engineering / tools/ support and services) **Job title** Quality Inspector 2 **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Northwest Aerospace Technologies ("NAT"), a Safran Company, is the only EASA DOA Certified aircraft interior reconfiguration group in the United States. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.

17 days ago

Everett, WA

$35,760–$56,190 / year

Annual salary** USD 35,760 - 56,190 **Job location** **Job location** North America, United States, Washington, Everett **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.

21 days ago

Redmond, WA

$25–$46.63 / hour

Job Title: Quality Inspector C Job Code: 35432 Job Location: Onsite at our Redmond, WA facility Job Schedule: 4/10 - Employees work 8 out of every 14 days - totaling 80 hours worked - and have every Friday off Shift: 1st shift. With customers mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.

30+ days ago

Marysville, WA

$35,760–$56,190 / year

Company : Safran Cabin Job field : Quality Location : Marysville , Washington , United States Contract type : Permanent Contract duration : Full-time Required degree : High School Diploma/GED Equivalent Required experience : First experience Professional status : Technician Spoken language(s) : English Fluent Salary range : USD 35,760 - 56,190 ITAR : ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.

21 days ago

Marysville, WA

$17.19–$27.01 / hour

Company : Safran Cabin Job field : Quality Location : Marysville , Washington , United States Contract type : Permanent Contract duration : Full-time Required degree : High School Diploma/GED Equivalent Required experience : First experience Professional status : Technician Spoken language(s) : English Fluent Salary range : USD $17.19/hr - $27.01/hr ITAR : ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.

16 days ago

Marysville, WA

$39,310–$61,780 / year

Company : Safran Cabin Job field : Quality Location : Marysville , Washington , United States Contract type : Permanent Contract duration : Full-time Required degree : High School Diploma/GED Equivalent Required experience : More than 3 years Professional status : Employees / Staff Spoken language(s) : English Fluent Salary range : USD $39,310.00 -$61,780.00 ITAR : ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.

30+ days ago

Marysville, WA

$39,310–$61,780 / year

Annual salary** USD $39,310.00 - $61,780.00 **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** More than 3 years **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.

30+ days ago

Redmond, WA

$28.33–$40 / hour

Maintains product quality documentation by keeping accurate records and files; such as Material Certifications, First Article Inspection Reports (AS9102), Inspection Method Sheets (IMS), First Piece Inspection. Ensures adherence to applicable Triumph Group internal, federal, state and local laws and regulations related to compliance and takes responsibility to ensure ongoing conformity with such rules and regulations.

30+ days ago

Renton, WA

Skills and Requirements - Advanced blueprint reading skills - Able to use hand inspection tools (Calipers, 6" scales, height gage, etc.) - Advanced math aptitude - Able to support inspection functions in multiple work centers - Knowledge of industry record keeping procedures and best practices - Familiar with digital, electronic inspection media - Analytical and problem-solving skills, with the ability to identify root cause, and suggest corrective and continuous improvement actions - Interpersonal skills and the ability to work effectively with a wide range of people in a diverse workforce - 1-3 years of quality inspection experience in an aerospace manufacturing environment strongly preferred - Lean Manufacturing experience - Knowledgeable in autoclaves and/or ovens Additionally, you will document non-conformities on company rejection tags and inspection pick-up forms, provide information and assistance to production and supervisory personnel, and verify kits in final inspection before shipping.

10 days ago

Everett, WA

Job Duties and Responsibilities: Performs first part, in-process, first article, and final inspections by utilizing surface plates, coordinate measuring machines (CMM), calipers, bore gages, micrometers, height gages, and other precision measuring devices, instruments, and equipment. Ensures that material traceability, processing certification, assembly and testing of customer-furnished, vendor-supplied products or work in progress meet internal and customer requirements.

13 days ago

Everett, WA

$25–$30 / hour

Key Responsibilities: - Mechanical and Cosmetic inspection - Provide Quality control activities including new product introduction - Provide inspection services for incoming goods, returns and assembly - Document non-conformances and report major quality issues to leadership - First Article inspection Skills and Experience: - It is essential that the successful candidate have solid inspection experience gained in a manufacturing environment. Quality Inspector Location: Everett, WA Job ID: #71789 Pay Range: $25-30 ONLY UP TO 8 WEEK Contract Job Description The company is offering an exciting opportunity for an Quality Inspector to join our fast-paced and innovative team.

30+ days ago

Everett, WA

$45,750–$71,890 / year

Able to inspect parts using gauges, scales, micrometers, calipers, height gauges and other hand tools -Able to document findings and fill out First Article Reports (FAI's) using the AS9102 forms -Able to write non-conformance tags for discrepant parts -Work independently with little supervision -Exhibit ethical independence and judgment of the parts and process -7 or more years' experience in mechanical inspection with focus on aerospace and manufacturing environment -Any other duties as assigned by the Quality Supervisor or Manager -The Q.A. **Reference number** 2025-163366 **Job details** **Domain** Production **Job field / Job profile** Quality - Development project quality assurance **Job title** Quality Inspector 3 **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Northwest Aerospace Technologies ("NAT"), a Safran Company, is the only EASA DOA Certified aircraft interior reconfiguration group in the United States.

17 days ago

Arlington, WA

Proficient in operating coordinate measuring machines (CMM) / Romer arms for automated quality inspections + Performs inspections and tests per QC Manual, QA Manual, procedures, instructions, drawings, and travelers at specified stages in production process + Inspects and/or tests products for variety of qualities such as dimensions, performance, and mechanical, electrical, or chemical characteristics + Interprets engineering drawings, schematic diagrams, or formulas and confers with management or engineering staff to determine quality of products or materials + Records inspection and test data + Evaluates inspection and/or test data and writes reports to validate or indicate deviations from existing manuals, procedures, instructions, drawings, or travelers + Recommends modifications of existing quality or production manuals, procedures, instructions, drawings, or travelers to achieve optimum quality within limits of equipment capability + Sets up and performs nondestructive tests on materials, parts, or products to measure performance or material characteristics, as applicable ABW is a leader in the Aerospace, Defense, Nuclear and Energy industries. Our diversity allows us to maintain a prominent level of fabrication production during any downturn or difficult time.

25 days ago

Seattle, WA

$56,715–$90,190 / year

In addition to the qualifications above, experience must include working with the Federal Meat, Poultry, and Egg Products Inspection Acts in order to inspect meat, poultry and egg products; working with basic SSOP and HACCP principles and practices in order to verify plant HACCP and SSOP responsibilities; performing basic mathematics and elementary statistical concepts and methods to perform testing and sampling procedures; and experience in reaching and interpreting conclusions. Surplus or displaced employees eligible for CTAP, RPL, or ICTAP priority must provide: proof of eligibility (RIF separation notice, notice of proposed removal for declining a transfer of function or directed reassignment to another commuting area, notice of disability annuity termination), SF-50 documenting separation (as applicable), current performance appraisal with rating of at least "Fully Successful" or equivalent, and your most recent SF-50 noting position, grade level, and duty location with your application per 5 CFR 330.

16 days ago

Seattle, WA

$6,253.75–$8,412.58

In addition to maintaining over 20,000 lane miles of state highway and 4,100 bridges, WSDOT leads an award-winning Active Transportation Plan, manages the worlds longest floating bridge, and operates the largest ferry system in the nation! Full-time employees who work full monthly schedules qualify for holiday compensation if they are employed before the holiday and are in pay status for at least 80 nonovertime hours during the month of the holiday; or for the entire work shift preceding the holiday.

21 days ago

Resume Resources

Free Resume Templates Free Resume Builder

Get noticed by top employers!

Upload your resume to let employers know you're open to Inspection job opportunities. Plus, receive relevant job recommendations in your inbox.

Create A Free Account

Inspection Jobs in Mill Creek, WA

Quality Control Inspector Jobot

Construction Engineering and Inspection Group Manager Consor Engineers

Construction Engineering and Inspection Group Manager Consor Engineers LLC

Quality Control Inspector Zeno Power

Inspector - Rail/Bus Colliers Engineering & Design

Building Inspector III City of Port Orchard

CMM Inspector Days Bothell Primus International LLC

Senior Construction Inspector Terracon Consultants, Inc.

Senior Construction Inspector (Part-Time) Terracon Consultants, Inc.

Quality Inspector - Aviation Primus International LLC

Quality Inspection Supervisor ELDEC Aerospace

Quality Inspector, Mechanical Inspection (2026-076) Astronics

Quality Inspector, Shipping Inspection (2026-075) Astronics

Quality Inspector - Mechanical Inspection Protingent

Quality Inspector, Receiving Inspection (2026-077) Astronics

Inspection Supervisor Crane Pumps & Systems Inc

Inspection Supervisor Helion Energy Inc

Construction Materials Testing/Inspection Project Manager Kleinfelder Inc

Inspection Technician/Operator DuPont Electronic Materials CMP

Fire Systems Inspections Manager Cosco Fire Protection Inc

Service Administrator - Inspections Cosco Fire Protection Inc

Claim Specialist - Property Field Inspection State Farm

Claim Team Manager - Property Field Inspection State Farm

Quality Inspector - Electromechanical - GO SQA Services

Quality Inspector 1 Safran Cabin Materials, LLC

Residential Home Inspector Pillar To Post

Quality Inspector 2 Safran Cabin Inc.

Quality Inspector 1 Safran Cabin Inc.

Transportation Quality Assurance Inspector The Kleinfelder Group Inc

Construction Inspector PMCS Group, Inc

Quality Inspector Starlink Space Exploration Technologies Corp

Quality Inspector (Starlink) SpaceX

Quality Inspector (2026-054) (WA, Kirkland) Astronics Corp

Public Works Plans Reviewer/Inspector City of Port Townsend

Quality Assurance Inspector B.E. Meyers & Co Inc

Quality Inspector 2 Safran

Quality Inspector 1 - SCI Safran

Quality Inspector C - First Shift L3Harris Technologies Inc

Quality Inspector 1 Safran SA

Quality Inspector 1 - SCI Safran SA

Quality Inspector Level 2 - SCI Safran SA

Quality Inspector Level 2 - SCI Safran

Quality Inspector 3 Triumph Group Inc

Quality Inspector Insight Global

QA Inspector - Aerospace 12/2018 Keltia Design Inc

Quality Inspector Butler America

Quality Inspector 3 Safran

Quality Control Inspector 11 ABW Technologies, Inc.

Consumer Safety Inspector U.S. Department of Agriculture

Environmental Compliance Inspector (TE2) State of Washington

Resume Resources