100 Results for

Inspection Jobs in New Britain, CT

Jobs

New!

Meriden, CT4 days ago

$25–$35 Per Hour

Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. Founded decades ago, with additional operations supporting advanced manufacturing markets, we are a precision-driven manufacturer producing mission-critical components for aerospace and power generation industries.

Hartford, CT24 days ago

$39.50–$47.41 Per Hour

The Metropolitan District Commission (MDC) provides quality water supply, water pollution control, mapping, and household hazardous waste collection to eight member municipalities: Bloomfield, East Hartford, Hartford, Newington, Rocky Hill, West Hartford, Wethersfield and Windsor. Environmental Factors : Essential functions are performed primarily outdoors, frequently exposed to any or all of the following: various weather conditions, high or deep dangerous places, working near moving mechanical parts, risk of electric shock, vibration, fumes, airborne particles, chemicals, etc.

New!

Hartford, CTToday

$43–$53 Per Hour

Environmental Factors : Essential functions are performed primarily outdoors, frequently exposed to any or all of the following: various weather conditions, high or deep dangerous places, working near moving mechanical parts, risk of electric shock, vibration, fumes, airborne particles, chemicals, etc. The Metropolitan District Commission (MDC) provides quality water supply, water pollution control, mapping, and household hazardous waste collection to eight member municipalities: Bloomfield, East Hartford, Hartford, Newington, Rocky Hill, West Hartford, Wethersfield and Windsor.

Hamden, Connecticut30+ days ago

M&J Engineering is a leader in construction management and inspection, ITS, mechanical, electrical, wastewater, water supply, tunnel airport, port, marine/coastal, environmental engineering, and design-build services for both new infrastructure projects and renovations. Since its inception in 2004, M&J has grown into diversified provider of engineering, construction management, construction inspection, technology, and environmental services to a broad range of clients, including federal, state and city/local agencies, private owners, architects, engineers and contractors.

Hartford, CT30+ days ago

Full-time

The key services are providing business management and marketing support to the local region in addition to Market Leaders, in all areas of project management, business development, training and other tasks necessary for the satisfactory performance and growth of the division and the firm. Maintains a systematic approach to monitoring workload in the division together with identifying, and aggressively pursuing market opportunities to maintain effective use of staff resources and to provide growth consistent with the firm's strategic plan.

Seymour, CT30+ days ago

$22–$24 Per Hour

The X-Ray Inspection – Parts Technician is responsible for performing X-ray inspection on parts within the warehouse to verify contents, quality, and compliance prior to shipment or inventory release. This role also supports shipping and receiving operations and plays a key part in maintaining accuracy, traceability, and product integrity in a manufacturing warehouse environment.

New!

Windsor Locks, CT1 day ago

$36–$41 Per Hour

Location: Windsor, CT 06095 Area Code: 860, 203, 413 Shifts: 1st #QualityEngineering #SupplierQuality #AerospaceJobs Job Summary Belcan is seeking a Supplier Quality Engineer to support source inspection activities. This role focuses on ensuring material and process quality, managing supplier performance, and supporting continuous improvement initiatives.

OXFORD, CT30+ days ago

Job Responsibilities:Conduct thorough inspections and tests on products or materials at various stages of production or delivery. Previous quality control inspecting experience in a manufacturing setting is a plus but not necessary.

Rocky Hill, CT24 days ago

$90,000–$115,000 Per Year

The Bridge Inspection Assistant Team Leader is responsible for performing NBIS-compliant bridge inspections across Connecticut, Rhode Island, and New York. Garg Consulting Services, Inc. is a multidisciplinary engineering and consulting firm specializing in transportation infrastructure, bridge inspection, and DOT projects throughout the Northeast.

Rocky Hill, CT24 days ago

We are seeking an experienced Bridge Inspection Team Leader / Structural Engineer to lead NBIS-compliant bridge inspections for state DOT and transportation infrastructure projects. At Garg Consulting Services, Inc., you won't be one of hundreds of inspectors-you'll be a key leader on high-visibility DOT bridge inspection programs across the Northeast.

Bristol, CT19 days ago

$90,000–$95,000 Per Year

The Account Manager will work closely with our Service Manager, technicians, and purchasing team to turn inspection findings and repair opportunities into clear, timely proposals for customers and to help customers make repair vs replace decisions. The right person will own service quote follow-up, manage key service accounts, visit customers, handle larger repair opportunities, respond to service bids, and help ensure that important work does not fall through the cracks.

New Britian, CT30+ days ago

Part-time

Dare Commercial Services is looking for an experienced individual to do a once yearly site inspection at a commercials site for a client in New Britain, Hartford, Avon and Enfield. You will be looking for maintenance related issues such as potholes, graffiti and debris among other issues.

Vernon, CT21 days ago

$25–$35 Per Hour

FAR Inspections is actively seeking a reliable independent contractor to perform residential mortgage inspections in Tolland County, Connecticut and surrounding communities. Lower volume counties typically feature higher per-inspection rates, while higher volume counties offer more consistent daily work.

Middletown, CT30+ days ago

_____________________________________________________________________________________Visium Resources is an award-winning employment firm with a mission to match talented individuals with highly successful organizations. The First Article Inspection Specialist will be responsible for all First Article Inspections (FAIs) meet customer requirements, productivity, and quality expectations.

Middletown, CT28 days ago

East Granby, CT29 days ago

$25–$35 Per Hour

2+ years in aerospace environment * Good mathematical skills * Knowledge/Practical experience in aerospace environment * Skills Desired: Strong attention to detail, ability to multitask, good communication skills Role & Responsibilities: * Perform dimensional and visual inspections on turbine engine components * Perform a full spectrum of dimensional inspections of parts involving extremely close tolerances * Operate computerized measuring equipment, train, and assist other inspectors as required with CMM * Perform a variety of duties to independently complete incoming, layout, first piece, in-process and final inspection of diversified turbine engine components being repaired * Ensure quality detailed inspection follows all applicable manuals and technical data. Job Title: Dimensional Inspector, 2nd Shift Locations: East Granby, CT (CT South) Pay: $25/hr - $35/hr (DoE) + 15% shift Differential (Full benefit package also included) Zip Code: 06026 Start Date: ASAP Schedule: 2nd Shift: 3:30pm-12:00am, Mon-Fri (training may be required on 1st/swing shift) Type: Full-Time/Permanent Position Keywords: #Inspector #DimensionalInspector #AerospaceJobs #CTjobs #fulltime #2ndshift Experience & Skill Requirements: * Previous experience as an FAA Repairman with FAA Return to Service or Airframe and Powerplant Mechanic experience highly desirable.

East Granby, CT29 days ago

$25–$35 Per Hour

2+ years in aerospace environment * Good mathematical skills * Knowledge/Practical experience in aerospace environment * Skills Desired: Strong attention to detail, ability to multitask, good communication skills Role & Responsibilities: * Perform dimensional and visual inspections on turbine engine components * Perform a full spectrum of dimensional inspections of parts involving extremely close tolerances * Operate computerized measuring equipment, train, and assist other inspectors as required with CMM * Perform a variety of duties to independently complete incoming, layout, first piece, in-process and final inspection of diversified turbine engine components being repaired * Ensure quality detailed inspection follows all applicable manuals and technical data. Job Title: Dimensional Inspector (1st Shift) Locations: East Granby, CT (CT South) Pay: $25/hr - $35/hr (DoE) - Full benefit package also included Zip Code: 06026 Start Date: ASAP Schedule: 1st Shift: 7:00am - 3:30pm, Mon-Fri Type: Full-Time/Permanent Position Keywords: #Inspector #DimensionalInspector #AerospaceJobs #CTjobs #fulltime #2ndshift Experience & Skill Requirements: * Previous experience as an FAA Repairman with FAA Return to Service or Airframe and Powerplant Mechanic experience highly desirable.

Hartford, CT30+ days ago

Full-time

Trigo’s team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results. Trigo provides a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance.

Rocky Hill, CT16 days ago

Duties: The area of focus will be inspecting work performed by construction contractors to ensure conformance with contract plans and specification, contract administration, reporting daily progress, tracking and documenting quantities of work performed, resolving construction problems and challenges in the field and other oversight responsibilities as assigned. Other certifications including NACE Coatings Inspection; ATSSA Traffic Control Supervisor; NETTCP HMA Inspector, NETTCP Concrete Inspector, Soils and Concrete, ACI Technician and AWS/CWI are a plus.

Rocky Hill, CT12 days ago

Manchester, CT22 days ago

$19–$24 Per Hour

This role is responsible for performing dimensional, visual, and functional inspections of manufactured products, documenting inspection results, identifying non-conformances, and communicating quality issues to production teams in real time. Industry: Plastics ManufacturingPosition OverviewSeeking a detail-oriented Quality Inspector to support production quality within a plastics manufacturing environment.

Bolton, CT30+ days ago

$20–$25 Per Hour

Requirements:· Minimum 3 years of experience in manufacturing environment· Knowledge/ experience with electrical measurement equipment and hand-held gauges including micrometers, calipers, dial indicators, gages, etc.· Ability to effectively read blueprints, mechanical drawings, inspection manuals and procedures.· Hamilton Connections is seeking an experienced Quality Inspector to work in a fast-paced manufacturing environment.

Colchester, CT18 days ago

Our Award-Winning Client, a nationally recognized leader in transportation and infrastructure solutions, is actively hiring experienced Inspectors to support Connecticut Department of Transportation (CTDOT) paving and infrastructure projects. Lead and oversee paving and construction inspection activities on active CTDOT roadway and bridge projects.

Hamden, CT18 days ago

Windsor, CT18 days ago

Hamden, Connecticut30+ days ago

Since its inception in 2004, M&J has grown into diversified provider of engineering, construction management, construction inspection, technology, and environmental services to a broad range of clients, including federal, state and city/local agencies, private owners, architects, engineers and contractors. M&J Engineering is a leader in construction management and inspection, ITS, mechanical, electrical, wastewater, water supply, tunnel airport, port, marine/coastal, environmental engineering, and design-build services for both new infrastructure projects and renovations.

Hamden, Connecticut30+ days ago

Hartford, CT30+ days ago

Full-time

To qualify, candidates must meet the minimum requirements above; however, candidates are also encouraged to review CTDOT inspection requirements listed in the "Consultant Engineering & Inspection Pamphlet" listed on the CTDOT Website. Certifications highly preferred: ACI level 1, NETTCP Concrete Inspector, NETTCP HMA Paving Inspector, and ATSSA-Traffic Control Supervisor.

Hartford, CT30+ days ago

Full-time

Certifications highly preferred: ACI level 1, NETTCP Concrete Inspector, NETTCP HMA Paving Inspector, and ATSSA-Traffic Control Supervisor. To qualify, candidates must meet the minimum requirements above; however, candidates are also encouraged to review CTDOT inspection requirements listed in the "Consultant Engineering & Inspection Pamphlet" listed on the CTDOT Website.

Hartford, CT30+ days ago

Full-time

To qualify, candidates must meet the minimum requirements above; however, candidates are also encouraged to review CTDOT inspection requirements listed in the "Consultant Engineering & Inspection Pamphlet" listed on the CTDOT Website. Requirements : Minimum Bachelor of Science (BS) Degree in Construction or Engineering field and/or NICET-certified in Transportation Construction Inspection Level 3 (TCI-III) or higher .

Hartford, CT30+ days ago

Full-time

Farmington, CT15 days ago

Reporting to the Inspection Lead and/or Quality Manager, this role supports quality assurance processes, maintains inspection accuracy, and promotes continuous improvement initiatives across operations. Employees may be required to:Move, climb, balance, stoop, kneel, crouch, crawl, reach, stand, walk, push, pull, lift, finger, grasp, and perform repetitive motions throughout the workday.

Wallingford, CT30+ days ago

$24–$25 Per Hour

Strong performers will have the chance to convert to a permanent role and grow within the organization.#INDTPGSHELTON Perform visual and dimensional inspections using microscopes, gauges, and measuring tools.

New!

Wethersfield, CT2 days ago

$40–$45

The Certified Welding Inspector is responsible for overseeing quality assurance activities related to structural steel and miscellaneous metals fabrication. Collaborate with shop supervisors, welders, and production personnel to resolve quality concerns and support production schedules.

New!

New Haven, Connecticut5 days ago

This position is ideal for a hands-on quality professional experienced in weld inspection, dimensional inspection, and manufacturing quality control, with strong attention to detail and documentation discipline. We are hiring a Quality Inspector to support welding, fabrication, assembly, and electrical control panel production.

New!

New Haven, CT4 days ago

$51,000–$70,000 Per Year

A growing manufacturing organization is seeking a detail-oriented Quality Inspector with strong weld inspection and UL control panel inspection experience to support fabrication, welding, assembly, and electrical manufacturing operations. This onsite opportunity offers $51,000-$70,000 and is ideal for candidates with strong quality inspection experience in manufacturing or fabrication environments.

New Haven, Connecticut10 days ago

Our client is seeking a detail‑oriented Quality Inspector to support welding, fabrication, assembly, and electrical control panel operations. The position works closely with Production and Quality teams to identify nonconformances and maintain consistent product quality.

Shelton, CT11 days ago

$25–$30 Per Hour

Candidates should be comfortable performing detailed inspections, reading technical prints, measuring tolerances, and supporting production quality activities in a fast-paced manufacturing environment. We are seeking experienced Quality Inspectors and CMM Operators with a strong manufacturing quality background and hands-on experience operating CMM equipment.

Shelton, CT11 days ago

$19–$25 Per Hour

We are seeking Quality Inspectors and CMM Operators ranging from entry-level candidates to individuals with approximately 3–5 years of experience in a manufacturing quality environment. DOEPosition Type: • Temporary Assignment only Shift: • 1st Shift - 4-10 hour days with Friday open for optional OT Mon-Thursay-7am -5pmPosition Overview.

Rocky Hill, CT30+ days ago

Full-time

From construction management and observation/inspection services to laboratory testing and materials and forensic engineering, our Construction Services market helps to develop and maintain America's infrastructure and supply chain and is a recognized industry leader with more than 25 accredited laboratories. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement, Kleinfelder, and its’ subsidiaries and affiliates, explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency.

Manchester, CT30+ days ago

Documentation & traceability: Record data and maintain accurate quality records (logs, reports, CoCs), ensuring full traceability for every inspected part; review shop job packages. Dimensional & physical inspections: Inspect incoming aerospace parts using precision tools (micrometers, calipers, height gauges, thread gauges, etc.).

Bloomfield, CT30+ days ago

Candidates must have worked in Dimensional Inspection, GT&D Basics, and have experience using hand held inspection tools. Candidates must be able to pass a basic background check and be lawfully permitted to work in the United States.

New!

Glastonbury, CT6 days ago

$65–$75 Per Hour

While performing the essential functions of this position, it is frequently necessary to: Assume a stationary position, Handle, inspect, and/or feel documents, materials and/or equipment relevant to the job; Communicate with colleagues, supervisors, and clients using Company email and telephone systems; Move around on the job-site, including ascending or descending on the landscape or on a ladder, and positioning oneself appropriately to access necessary testing materials and equipment, usually for prolonged periods of time, Lift and/or move up to 50 lbs. Essential functions of the Chief Inspector position include supervising, coordinating, and tracking the progress of construction projects, assisting and advising inspectors regarding project management, construction, and inspection issues, and alerting supervisors of major or consistent discrepancies.

New!

Cheshire, CT4 days ago

$85,000–$130,000 Per Year

As a Resident Engineer/Chief Inspector you will provide oversight services for a variety of infrastructure projects in scope and size from road reconstruction projects to complex bridge replacement projects across Connecticut. We deliver environmental and sustainability services to our clients through the integration of over 30 advisory, technical environmental, and engineering disciplines to help clients address some of their most complex challenges around sustainability.

Rocky Hill, CT12 days ago

Other certifications including NACE Coatings Inspection; ATSSA Traffic Control Supervisor; NETTCP HMA Inspector, NETTCP Concrete Inspector, NETTCP QA Tech, Soils and Concrete, ACI Technician and AWS/CWI are a plus. The Chief Inspector will work closely with contractors to maintain project goals related to cost, schedule, and quality while also serving as a liaison to design staff to address RFIs, review shop drawings, and assess project changes for constructability.

Hamden, Connecticut30+ days ago

Since its inception in 2004, M&J has grown into diversified provider of engineering, construction management, construction inspection, technology, and environmental services to a broad range of clients, including federal, state and city/local agencies, private owners, architects, engineers and contractors. Participate in progress meetings, safety briefings, and coordination meetings with CTDOT staff, railroad representatives, contractors, utility providers, and other stakeholders; prepare meeting summaries and track action items as required.

Manchester, CT11 days ago

$79,326.70–$95,192.02 Per Year

The Town of Manchester is a vibrant and diverse community with an array of public services that reflect a set of values shared by its residents and leaders committed to bringing Manchester into the 21st century as an up-and-coming community that cares about its residents, its children, its schools and parks, its roads and utilities, and the health and safety of the Manchester Community. Makes field inspections of structures in the process of construction or alteration to assure proper location and construction in conformance with building and property maintenance codes and issues orders for corrective actions as required.

New!

Hamden, CT3 days ago

Since its inception in 2004, M&J has grown into a diversified provider of engineering, construction management, construction inspection, technology, and environmental services to a broad range of clients, including federal, state and city/local agencies, private owners, architects, engineers and contractors. M&J Engineering is a leader in construction management and inspection, ITS, mechanical, electrical, wastewater, water supply, tunnel airport, port, marine/coastal, environmental engineering, and design-build services for both new infrastructure projects and renovations.

New!

New Haven, CT4 days ago

Operate Coordinate Measuring Machines (CMM) and various measurement gauges, calipers, and micrometers to assess product dimensions and tolerances. Proficiency in operating Coordinate Measuring Machines (CMM) and using measurement gauges, calipers, and micrometers.

Rocky Hill, CT29 days ago

$41–$61 Per Hour

We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. + Review and enforce designs, calculations, sketches, diagrams, schematics, and final working drawings of construction plans related to airport development projects including runways, taxiways, aprons, hangars, terminals, and other airport facilities.

Resume Resources

Free Resume Templates Free Resume Builder

Get noticed by top employers!

Upload your resume to let employers know you're open to Inspection job opportunities. Plus, receive relevant job recommendations in your inbox.

Create A Free Account

Inspection Jobs in New Britain, CT

Quality Inspector 2nd Shift Jobot

Engineering Technician 1 MDC

Engineering Technician 2 MDC

Bridge Inspection Team Leader M&J Engineering

Department Manager of Construction Management and Inspection (49906) Urban Engineers, Inc.

X-Ray Inspection  Parts / Shipping & Receiving Top Prospect Group LLC

Supplier Quality - Source Inspection Belcan

Inspection Hamilton Connections

Bridge Inspection Assistant Team Leader Garg Consulting Services, Inc.

Bridge Inspection Team Leader / Structural Engineer (NBIS, FHWA/NHI Certified) – DOT Infrastructure Garg Consulting Services, Inc.

Field Service Account Manager - Repair & Inspection Sales Ray Jurgen

PT Site Inspection - Connecticut Dare Commercial Services

Full-Time Regional Vacancy Inspection Observer FAR Inspections

First Article Inspection Specialist Visium Resources, Inc.

Sr. First Article Inspection Specialist Visium Resources, Inc.

Dimensional Inspector (2nd Shift) Belcan

Dimensional Inspector (1st Shift) Belcan

Aerospace Quality Inspector TRIGO ADR Americas

Construction Inspector Keville Enterprises Inc.

Senior Construction Inspector Keville Enterprises Inc.

In-Process Inspector Top Prospect Group LLC

QA Inspector Hamilton Connections

Inspector – Bridge or Paving CTDOT - Colchester Metro Associates

Inspector – Bridge or Paving CTDOT NETTCP - ALL OVER CT Metro Associates

Inspector – Bridge or Paving CTDOT - Windsor Metro Associates

Construction Inspector M&J Engineering

Senior Construction Inspector M&J Engineering

Chief Construction Inspector (43842) Urban Engineers, Inc.

Construction Inspector (49340) Urban Engineers, Inc.

Senior Construction Inspector (43848) Urban Engineers, Inc.

Construction Inspector (43845) Urban Engineers, Inc.

Quality Inspector 2ND Shift Top Prospect Group LLC

PCB Quality Inspector Top Prospect Group LLC

Certified Welding Inspector, Metal Fabrication in Connecticut Metal Recruiters

Quality Inspector – Welding, Fabrication & UL 508A Control Panels BlackStar

Quality Inspector - UL Certified - $51K-$70K New Haven, CT Direct Line Workforce Solutions

Quality Inspector – Welding, Fabrication & Electrical Control Panels Confidential Recruiting Partners

2nd shift Quality Inspector Top Prospect Group LLC

Quality Inspector Top Prospect Group LLC

Construction Inspector Kleinfelder, Inc.

Production Quality Inspector Johnson Service Group

INSPECTOR AEROSPACE ALLOYS INC

Chief Construction Inspector Tectonic MSA LLC

Chief Inspector SLR Consulting

Chief Inspector I Keville Enterprises Inc.

Chief Inspector – Railroad & Electrical Infrastructure M&J Engineering

Assistant Chief Building Inspector Town of Manchester

Chief Inspector M&J Engineering

Aerospace Quality Inspector Revere Staffing Partners

Part-Time Senior Construction Inspector, Civil - Airports AECOM

Resume Resources