233 Results for

Lab Technician Jobs in North Carolina

Jobs

Greensboro, NC21 days ago

$24.50–$24.50 Per Hour

Set up and conduct tests such as multi-pass filtration, cold start, flow fatigue, pressure drop, dirt holding capacity, collapse/burst pressure, impulse, bubble point, and tensile testing. The Hydraulic Test Lab Technician evaluates products by conducting performance, environmental, and operational testing using hydraulic test stands.

Monroe, NC13 days ago

$23–$27.50 Per Hour

You will execute specimen preparation, perform metallurgical evaluations, maintain test equipment, and ensure accurate, traceable digital data entry within the MES and QMS systems-directly supporting production readiness, quality compliance, and SPQDC performance. The ideal candidate brings strong attention to detail, precision in laboratory practice, familiarity with metal testing methods, and the ability to follow established procedures while supporting continuous improvement of material verification workflows.

High Point, NC23 days ago

$15–$21 Per Hour
Temporary
Contractor
Full-time

Implements validated test methods for pharmaceutical raw materials and finished products for strength, impurities, and identity, spectroscopy, and traditional quantitative analysis, spectroscopy, and/or traditional wet chemical testing as well as chromatography. US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions.

New!

Raleigh, NC4 days ago

$26.59–$38.23 Per Hour

This position is employed by NC Health (Rex Healthcare, Inc., d/b/a NC Health), a private, fully-owned subsidiary of UNC Heath Care System. Associate’s degree in Clinical Laboratory Science, Medical Laboratory Technician, Chemical Science, or Biological Science.

New!

Durham, NC1 day ago

National Healthcare Association (NHA) --Clinical Laboratory Phlebotomy Examination (CLPlb), American Society of Clinical Pathologists-- Phlebotomy Technician Examination [PBT(ASCP)], International Academy of Phlebotomy Sciences (IAPS), National Phlebotomy Association (NPA), American Society of Phlebotomy Technicians (ASPT), National Phlebotomy Certification Examination (NPCE), National Phlebotomy Solutions (NPS), American Medical Technologists (AMT), or another national certification as approved by Clinical Labs leadership. Perform a variety of the technical procedures involved in the procurement, processing, and evaluation of patient specimens for use in the diagnosis and treatment of disease; teach and perform routine clerical and technical procedures including specimen collection, and responsible for the delivery of supplies and procurement of specimens from physicians’ offices, clinical specimen preparation and processing for analysis and dispatch, patient registration and order entry; and serve as hospital laboratory representative and liaison with outside clients.

New!

Durham, NC1 day ago

Perform a variety of multi-skilled support functions including specimen collection, receipt and preparation of specimens for analysis, lead support tech; assist with workflow coordination in area; teach and perform routine clerical and technical processes required for the smooth operation of the laboratory unit; responsible for the delivery of supplies to correct location; serve as a liaison to internal and external customers. National Healthcare Association (NHA) --Clinical Laboratory Phlebotomy Examination (CLPlb), American Society of Clinical Pathologists-- Phlebotomy Technician Examination [PBT(ASCP)], International Academy of Phlebotomy Sciences (IAPS), National Phlebotomy Association (NPA), American Society of Phlebotomy Technicians (ASPT).

New!

New Hanover County Airport, NC4 days ago

The candidate will be responsible for the installation, maintenance and repair of HVAC systems utilizing knowledge of refrigeration theory, electrical schematics, pneumatic and building automation systems (BAS), pipe fitting, welding and brazing, and mechanical layouts. This position requires a minimum of an associate's degree from a two-year college or technical school with a certificate or military training and experience in Heating, Ventilation, and Air Conditioning and 10+ years of HVAC experience is preferred.

New!

Belmont, NC1 day ago

$55,000–$70,000 Per Year

The Center for Applied Textile Technology is seeking a skilled electromechanical Maintenance Technician/Millwright to support our cutting-edge polymer, fiber, and textile product and process development center. Reporting directly to the Vice President-Fiber Innovation and Facilities Development, this position plays a crucial role in ensuring the efficient operation and maintenance of our state-of-the-art facility.

Morrisville, NC15 days ago

$48,036–$64,374 Per Year

4. Experience in one or more of the following areas: 3D Printing, Electronics, Electrician/Electrical Contracting, High Voltage Electrical Safety, Electric motor repair, Onroad/offroad Automotive Repair, Communication/Networking hardware, Computer repair, Robotics, Automation, Mechatronics, HVAC, Farming. Job Purpose : Work with design/test engineers on building test fixtures, debug circuitry, test setup, equipment maintenance and/or perform testing.

New!

Durham, NC2 days ago

$20–$24 Per Hour
Contractor
Full-time

This is an excellent opportunity to gain experience in the biotech industry, even without extensive technical background, while contributing to a highly collaborative team. This 6-month contract role offers a unique blend of document control responsibilities and hands-on sample preparation to support laboratory operations.

Gastonia, NC30+ days ago

Full-time

Perform laboratory testing on painted parts, including adhesion tests, thickness measurements (DFT), gloss levels, hardness, and color matching. This role supports the paint department by validating coating performance, conducting defect analysis, and maintaining accurate laboratory documentation.

Research Triangle Park, NC30+ days ago

Full-time

LG&E has an extensive network of production plants, retail stores, distribution centers, and customer service locations with a focus on making our world more productive every day by providing high-quality solutions, technologies and services which are making our customers more successful by helping to sustain and protect our planet. We live our mission of making our world more productive every day by providing high-quality solutions, technologies and services which are making our customers more successful and helping to sustain, decarbonize and protect our planet.

Concord, North Carolina7 days ago

The QC Technician will support the plant in aligning Celgard systems and processes to the automotive requirements; specifically in the product quality testing lab, and will assist the quality team in maintaining and performing other quality-related duties in the manufacturing area that directly support the on-going success of the value stream. Reporting to the Quality Supervisor, the Quality Control Technician serves as part of a team responsible for performing all duties associated with product quality testing in a plastic separator manufacturing facility, and is responsible for maintaining the safe and secure operation of the quality lab on his/her shift.

Charlotte, NC16 days ago

$24–$25.37 Per Hour

Understanding of closed‑loop control systems, loop tuning, and system stability -Ability to read and interpret complex electrical and refrigeration schematics -Experience with 460‑3‑60 electrical equipment, VFDs, pumps, and boilers -Strong electrical and mechanical troubleshooting skills Preferred requirements: -AS or AAS in related technical field. Individuals should be able to set up test environment, calibration and drive efficient chiller operation The ideal candidate will have extensive experience in testing and troubleshooting water- and air-cooled commercial chillers, as well as maintaining a safe and efficient lab environment.

Hickory, North Carolina30+ days ago

As a Cath Lab Technician, you will play a crucial role in the diagnosis and treatment of cardiovascular diseases by assisting physicians during cardiac catheterization procedures. Sebenza LLC is seeking a highly skilled and motivated Cath Lab Technician to join our team in Hickory, North Carolina.

Charlotte, NC30+ days ago

Full-time

Job expectations are as follows: • Work on projects in the applications lab to evaluate dispersions, additives, and/or pigments in paint or colorant formulations to support internal and external customers as well as support product volume growth. Title: Chemical Lab Technician Shift: M-F 8am-5pm Location: Charlotte NC USA Duration: 12 Months Job opportunity: Chemistry lab technicians assist chemists in their lab work.

Charlotte, North Carolina7 days ago

Charlotte, NC30+ days ago

Proven ability in independently leading / running chillers, reporting the results, expert in loop tuning and drive test cycle / loop efficiency.* 5+ years of experience with hand/pneumatic tools, advanced shop mathematics, complex measuring equipment, precision measuring instruments and other toolsPreferred requirements:* AS or AAS in related technical field.* Individuals should be able to set up test environment, calibration and drive efficient chiller operation The ideal candidate will have extensive experience in testing and troubleshooting water- and air-cooled commercial chillers, as well as maintaining a safe and efficient lab environment.

Charlotte, NC13 days ago

5+ years of experience with hand/pneumatic tools, advanced shop mathematics, complex measuring equipment, precision measuring instruments and other tools - Must be able to operate hand tools (cordless drill, impact wrenches, cranes operation, forklift) Work Environment - Hands-on role requiring frequent standing, lifting (up to 50 lbs), climbing ladders, and working around moving mechanical equipment. Minimum requirements: - Technical/Business School Certificate or High School Diploma or GED or Skilled Trades Apprenticeship - 5 + Yrs experience in Chiller/Hvac operations, station and chiller and/or 5 years' experience in laboratory environment, for mechanical/electrical machinery.

High Point, NC23 days ago

Contractor

Implements validated test methods for pharmaceutical raw materials and finished products for strength, impurities, and identity, spectroscopy, and traditional quantitative analysis, spectroscopy, and/or traditional wet chemical testing as well as chromatography. Description: A Day in the Life: Conducts chemical and physical testing of pharmaceutical raw material samples by internally developed and compendial test methods.

Morrisville, NC30+ days ago

From the Affordable Care Support Center, located in North Carolina’s Research Triangle Park, along with field-based teams, Affordable Care provides business expertise and support services to dental practices, taking care of non-clinical duties so dentists can focus on treating patients (visit affordablecare.com Founded in 1975, today Affordable Care, LLC is America’s largest dental support organization (DSO) focused on tooth replacement services, serving more than 400 dental practices across the United States.

Greensboro, NC30+ days ago

Partners and coordinates daily/weekly scheduling with management, plant personnel and crewmembers, as well as Department of Transportation inspectors to obtain necessary samples and mix designs. In addition to paving services, we provide stone base construction, bridge construction, curb and gutter construction, site utilities, complete site development and sand products.

New!

Asheville, NC5 days ago

Ability to perform work in a lab or office setting, remain standing for long periods while conducting tests, work around strong smells, and wear personal protective equipment while handling samples (e.g., lab coat, safety glasses and gloves; all PPE provided by Pace®). If you're curious, driven and inspired by the idea of doing important work with real-world impact, there's no better place to build your career.

Raleigh, NC9 days ago

This role plays a vital part in delivering accurate, timely diagnostic results through high-complexity real-time PCR testing and other laboratory procedures that directly impact patient care. As we continue expanding access to high-quality healthcare in rural communities throughout the Southeastern U.S., our mission remains the same: Speedy recovery for our patients.

Charlotte, North Carolina7 days ago

Charlotte, NC30+ days ago

Familiarity with HVAC operation, refrigerant handling, and EPA certification is a plus* Experience with pumps, VFDs, boilers, is a plus* LO/TO controls troubleshooting and Arc Flash training is helpful* Works under moderate supervision to support engineering testing of chillers.* Operates, inspects and maintains test setups and equipment to detect malfunctions* Familiarity with electrical work, including 460-3-60 machinery and medium voltage industrial power supplies.*

Raleigh, NC30+ days ago

Lead troubleshooting efforts for complex electronic circuits and systems, leveraging extensive experience and expertise to identify root causes of issues and implement effective solutions.* Excellent communication and leadership skills, with the ability to collaborate effectively in a team environment and provide mentorship to junior technicians.

New!

Whitsett, NCToday

$22–$25 Per Hour
Temporary
Contractor

By applying for this job, you agree to receive calls, Al-generated calls, text messages, or emails from Synerfac Technical Staffing and our contracted partners. --Responsibilities: The Lab Technician will be responsible for performing general lab duties including testing chemicals and raw materials.

Durham, NC23 days ago

Full-time

The Lab Technician will support the bioanalytical laboratory by performing routine sample preparation, assisting with day-to-day laboratory operations, and helping maintain a safe, organized, and compliant lab environment. Computer Skills: Microsoft Office (Word, Excel, PowerPoint, Access, Publisher, Outlook, Internet Explorer) No additional computer skills required.

New!

Asheville, NC4 days ago

Ability to perform work in a lab or office setting, remain standing for long periods while conducting tests, work around strong smells, and wear personal protective equipment while handling samples (e.g., lab coat, safety glasses and gloves; all PPE provided by Pace). If you're curious, driven and inspired by the idea of doing important work with real-world impact, there's no better place to build your career.

Lumberton, North Carolina30+ days ago

$47,703.86

Education and Experience:Associate degree in medical technology from an appropriately accredited institution or completion of a certified laboratory assistant course in medical technology or a comparable course, and one year of medical laboratory experience; or high school or General Educational Development diploma and three years of medical laboratory experience; or an equivalent combination of education and experience. Must take and successfully pass a pre-employment drug test, Motor Vehicle Records driver license check, as well as submit to random, reasonable suspicion, and post-accident drug and alcohol testing.

Concord, North Carolina7 days ago

Charlotte, NC16 days ago

The ideal candidate will have extensive experience in testing and troubleshooting water- and air-cooled commercial chillers, as well as maintaining a safe and efficient lab environment. Proven ability in independently leading / running chillers, reporting the results, expert in loop tuning and drive test cycle / loop efficiency.

Hickory, NC23 days ago

$76,000–$102,000 Per Year

The Cath Lab Technician will support diagnostic and interventional cardiac catheterization procedures, assisting the clinical team in delivering safe, procedurally focused patient care. A hospital in Hickory, NC is seeking a mid-level Cath Lab Technician to join its cardiac catheterization laboratory.

Hickory, NC13 days ago

Today, Eyemart Express is celebrated for promptly delivering quality eyewear at great prices while maintaining great relationships with optometrists and local communities. As an Optical Lab Technician, you'll be responsible for cutting, edging, and creating prescription lenses to ensure customers receive their new glasses in a timely manner.

Charlotte, North Carolina7 days ago

Concord, North Carolina7 days ago

Charlotte, North Carolina7 days ago

Whitsett, North Carolina23 days ago

$24–$27

The ideal candidate will be strategic minded team player that can also work independently with a positive attitude, be proactive, manage complex tasks and problem solve, and possess a high attention to detail. Qualifications of Candidate:Associate’s or Bachelor’s Degree in science from an accredited college or university with one to two years related experience or training in a laboratory performing routine testing.

Concord, North Carolina7 days ago

Monroe, North Carolina15 days ago

What We're Looking For: Education: Associate degree in chemical, physical, or biological science, or medical laboratory or equivalent education or training OR successfully completed military training of 50 or more weeks, required. All individuals who are newly certified ASCP beginning January 1, 2004, must participate and maintain ASCP Board of Certification (BOC) through the Certification Maintenance Program (CMP).

New!

Durham, NC2 days ago

$24–$26 Per Hour
Temporary

Under the direction of the Senior Mold Engineer, the Injection Molding and 3D Printing Lab Technician will operate injection molding machines, adjust process settings to improve part quality, handle and dry molding resins, hang and remove molds, measure parts, perform preventative maintenance on machines, monitor and troubleshoot 3D print builds, and provide quality “finished” printed and molded components to business customers in order to support the 3DP&P groups in their delivery of quality prototype parts to business customers in a timely manner. Rose International has an official agreement (ID #132522), effective June 30, 2008, with the U.S. Department of Homeland Security, U.S. Citizenship and Immigration Services, Employment Verification Program (E-Verify).

APEX, NC30+ days ago

Performs basic laboratory testing including but not limited to organic content, grain size analysis, compaction, processing of material, and compression testing of concrete specimens. We specialize in delivering high-quality engineering services across various sectors, including renewable energy, industrial, and commercial projects and delivered more than 100 projects in 17 states.

Wilmington, North Carolina30+ days ago

Location: Scotts Hill Medical Center,109 Scotts Hill Medical Drive,Wilmington, North Carolina 28411, but may also rotate to other satellite locations such as Pender Medical Center and NHRMC Orthopedic Hospital. All individuals who are newly certified ASCP beginning January 1, 2004, must participate and maintain ASCP Board of Certification (BOC) through the Certification Maintenance Program (CMP).

Greensboro, NC30+ days ago

This position supports daily operations at a collection site by providing excellent customer service, handling client communications, performing specimen collections and testing, and reporting results. Perform certified specimen collections, including urine, alcohol, saliva, fingernail, hair follicle, and DNA samples.

Greensboro, NC30+ days ago

Wilmington, North Carolina30+ days ago

All individuals who are newly certified ASCP beginning January 1, 2004, must participate and maintain ASCP Board of Certification (BOC) through the Certification Maintenance Program (CMP). Associate degree in a chemical, physical, or biological science or medical laboratory or equivalent education and training OR successfully completed military training of 50 or more weeks.

Resume Resources

Free Resume Templates Free Resume Builder

Get noticed by top employers!

Upload your resume to let employers know you're open to Lab Technician job opportunities. Plus, receive relevant job recommendations in your inbox.

Create A Free Account

Lab Technician Jobs in North Carolina

Hydraulic Test Lab Technician Advanced Personnel Resources, Inc.

Metallurgical Lab Technician (metal testing) Butler Aerospace and Defense

Lab Technician US Tech Solutions, Inc.

Medical Technologist I - Oncology Lab Raleigh UNC Health

Clinical Technician II - Pathology Record Control - PRN, As Needed Duke Health

Clinical Technician III - Pediatric Phlebotomy - First Shift Duke Health

HVAC Technician Quality Chemical Laboratories

Electromechanical/Millwright Technician Gaston College

Engineering Technician Careers Integrated Resources Inc

Lab Technician (Bioworks) Accentuate Staffing

Paint Quality Lab Technician IFab Corporation

Lab Technician I Linde Gas & Equipment Inc

Quality Control Lab Technician Asahi Kasei Semiconductor, Inc.

HVAC Lab Technician Belcan

Cath Lab Technician SEBENZA LLC,

Chemical Lab Technician LanceSoft Inc

Quality Control Lab Technician Celgard, LLC

Quality Control Lab Technician Asahi Kasei Battery Separator Canada Corporation

HVAC Lab Technician - ADV Belcan

HVAC Lab Technician - EXP Belcan

Lab Technician Integrated Resources, Inc

Dental Lab Support Specialist Technician Affordable Care

QC Lab Technician AMAT Southeast

Lab Technician PACE

Lab Technician MainStreet Family Urgent Care

Quality Control Lab Technician Bionique Scientific

Quality Control Lab Technician Asahi Kasei Advance America

Lab Technician - ADV Belcan

Electronic Lab Technician IV Belcan

Lab Technician Company Confidential

Lab Technician I, Bioanalytical MedPharm

Lab Technician Pace Analytical Services, LLC

Medical Lab Technician II Robeson County

Quality Control Lab Technician Veloxis Pharmaceuticals

Quality Control Lab Technician Asahi Kasei Plastics North America, Inc.

HVAC Lab Technician - EXP Lancesoft

Cath Lab Technician All Med Search

Optical Lab Technician FT Hickory, NC #207 Eyemart Express

Quality Control Lab Technician Asahi Kasei Bioprocess America, Inc

Quality Control Lab Technician Asahi Kasei America, Inc.

Quality Control Lab Technician Crystal IS, Inc.

Lab Technician I Berkshire Corporation

Quality Control Lab Technician Bionique Testing Laboratories LLC

Medical Lab Technician I - Pediatrics Novant Health

Injection Molding and 3D Printing Lab Technician Jobs in USA, NC, Durham | Rose International Job Rose International

Lab technician Explicit Engineering Design And Ana

Medical Lab Technician I - Satellite Laboratories Novant Health

Lab Technician Graham Personnel Services

QC Lab Technician CRH Americas

Medical Lab Technician I Novant Health

Resume Resources

Similar Job Searches