Principal Laser Engineer MKS IncPrincipal Laser EngineerMilpitas, CA$139,000–$231,000 / yearDefine test strategies, build, test and document system prototypes: measure optical and opto-electronic parameters and evaluate results, create test reports and generate design documentation including optical diagrams, drawings, and optical components specifications. Proven experience with optical measurement instruments: beam parameters analyzers, power meters, auto-correlators, fast opto-electronics, oscilloscopes, spectrum analyzers and spectrometers, scanning interferometers.
Laser Engineer AetherfluxLaser EngineerSan Carlos, CaliforniaOptical Modeling and Simulation: Use optical design software (e.g., Zemax, Code V) to model laser systems, perform simulations, and optimize performance parameters. Thermal Management: Work with thermal engineers to design cooling systems and manage thermal effects within laser systems to ensure stability and efficiency.
NewLaser Process Development Engineer, Staff Confluent MedicalLaser Process Development Engineer, StaffFremont, CaliforniaOur unparalleled technical expertise, proven experience and partnership with our clients has allowed us to perfect the process necessary to deliver world-class medical devices through innovative material science, engineering and manufacturing. Requirements: BS degree in a relevant engineering discipline and five or more years of related engineering experience; or a MS degree with a minimum of three years of relevant experience.
NewLaser Process Development Engineer II Confluent MedicalLaser Process Development Engineer IIFremont, CaliforniaOur unparalleled technical expertise, proven experience and partnership with our clients has allowed us to perfect the process necessary to deliver world-class medical devices through innovative material science, engineering and manufacturing. As a qualified candidate, you will: Under the direction of the Process Engineering Manager, be responsible for laser and mechanical process development (from proof-of-concept prototypes to sustained manufacturing validation).
Laser Engineer aureliussystems.comLaser EngineerSan Francisco, CaliforniaKey Duties and Responsibilities Beam‑Train Architecture & Assembly: Design and assemble the end‑to‑end optical path—including coatings, mirrors, fiber/optics interfaces, and alignment fixtures—to meet power and beam‑quality specifications. Prototype Iteration & Field Trials: Drive rapid bench‑prototype builds through range‑testing cycles (dry‑runs, live engagements), capturing performance data to refine optical and mechanical designs.
Principal Laser Diode Engineer MolexPrincipal Laser Diode EngineerFremont, CAFull timeKnowledge of laser and component qualification tests (i.e., GR-468), multicell reliability testing, methodology and analytic tools (e.g., ReliaSoft Weibull++/ALTA, JMP). Our comprehensive optical, mechanical, electrical and software integration capabilities enable us to serve the needs of high-density, high-bandwidth, and flexible optical networks.
Laser Field Service Engineer Laser Away LLCLaser Field Service EngineerSan Jose, CA$90,000–$95,000 / yearEmployees must be able to perform the essential functions of the position satisfactorily and, if requested, reasonable accommodations will be made to enable employees with disabilities to perform the essential functions of their job, absent undue hardship. A LaserAway Laser Field Service Engineer will be responsible for all the laser maintenance, safety, and team communication that ultimately support all clinic operations.
Laser Safety Design Engineer - Camera Hardware Apple IncLaser Safety Design Engineer - Camera HardwareCupertino, CADesign, implement, and specify optical and electrical subsystems architecture for mitigating optical hazards Validate optical safety architecture using simulations (LightTools, Zemax, Matlab) and experimental lab setups Collaborate with x-functional teams (system, optical, electrical, product safety, firmware, operations, etc.) to understand and solve issues related to design and implementation of laser safety architecture and processes Use analytical methods (FMEA, FTA) to track use cases and failure modes that violate laser safety compliance Stay abreast of the latest industry optical radiation safety specifications such as IEC-60825, IEC-62471, IEC-62368, etc. As a Camera Hardware Laser Safety Engineer, you will be responsible for the design and development of innovative camera hardware, including visible and IR illumination technologies that enhance the imaging and depth sensing capabilities of Apple products.
Manufacturing Engineer - Laser Systems KLA CorporationManufacturing Engineer - Laser SystemsMilpitas, CA$106,700–$181,400 / yearOur expert teams of physicists, engineers, data scientists and problem-solvers work together with the world's leading technology providers to accelerate the delivery of tomorrow's electronic devices. This is a unique opportunity to become the go-to expert for sophisticated laser technology, solve highly visible technical challenges, and directly shape the performance of systems used by some of the world's most advanced technology manufacturers.
Principal Laser Design Engineer MACOM Technology Solutions Holdings IncPrincipal Laser Design EngineerMilpitas, CA$98,000–$167,000 / yearAs a successful candidate, you will be a key member in our product development team and be responsible for the design, development, and validation of next-generation semiconductor laser products for datacenters, telecommunications, and emerging technologies. MACOM sells and distributes products globally via a sales channel comprised of a direct field sales force, authorized sales representatives, and leading industry distributors.
NewLead Mechanical Engineer, Laser Communications Cowboy SpaceLead Mechanical Engineer, Laser CommunicationsSan Carlos, CaliforniaOur modular, scalable satellites collect sunlight in Low Earth Orbit to enable multiple integrated applications: transmitting energy via infrared lasers (space-to-earth and space-to-space), powering on-orbit high-performance computing clusters (GPU/TPU), and providing secure, high bandwidth optical data transport. Export Control Requirement: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), applicants must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
Lead Design Engineer - Semiconductor Lasers The Hiring MethodLead Design Engineer - Semiconductor LasersFremont, CaliforniaThe successful candidate will take ownership of laser design activities from concept through fabrication, characterization, qualification, and new product introduction while working closely with internal engineering teams, manufacturing partners, customers, and suppliers. This role will focus on the design and development of high-power Indium Phosphide (InP) semiconductor lasers used in next-generation optical communications and AI-driven data center infrastructure.
Senior Laser Process Engineer Diamond Foundry Inc.Senior Laser Process EngineerCA$130,000–$165,000 / yearThis position will often: Sit, stand for long periods, walk, grasp, reach with hands and arms, lift below and above shoulders, bend, twist at the waist, climb, balance, stoop, squat, kneel, crawl, talk, hear, see, use fine finger manipulation, and complete repetitive motions. This employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. If E-Verify cannot confirm that you are authorized to work, this employer is required to give you written instructions and an opportunity to contact Department of Homeland Security (DHS) or Social Security Administration (SSA) so you can begin to resolve the issue before the employer can take any action against you, including terminating your employment.
Senior Manufacturing Engineer (Laser Welding) Procept BioroboticsSenior Manufacturing Engineer (Laser Welding)San Jose, CA$131,060–$154,190 / yearIt continues with our one-of-a-kind management program designed to build the best managers in the industry, where our people managers across functions come together to exchange ideas and grow, as both managers and learners, in an environment that challenges, supports and broadens. It starts with our live induction program that serves as an incubator for cross-functional team building, an immersion in Procept's history, jam-packed interactive sessions with executive leadership and a crash-course in the mission and purpose of what we do.
Principal Laser Component Engineer - Optical Solutions Koch IncPrincipal Laser Component Engineer - Optical SolutionsFremont, CAPrincipal Laser Component Engineer - Optical Solutions - Fremont, California, United States - 188838 - Koch. Koch Engineered Solutions.
Staff /Sr Staff Laser Module & Systems Characterization Engineer Lightmatter IncStaff /Sr Staff Laser Module & Systems Characterization EngineerMountain View, CA$187,000–$260,000 / yearThe company invented the world's first 3D-stacked photonics engine, Passage, capable of connecting thousands to millions of processors at the speed of light in extreme-scale data centers for the most advanced AI and HPC workloads. Hands-on experience characterizing laser modules (DFB lasers, optical amplifiers, and other coherent sources) in a research or NPI environment with experience with DWDM optical link bring-up and validation as a plus.
NewOptical Engineer, Lasers & Photonics Cowboy SpaceOptical Engineer, Lasers & PhotonicsSan Carlos, CaliforniaOur modular, scalable satellites collect sunlight in Low Earth Orbit to enable multiple integrated applications: transmitting energy via infrared lasers (space-to-earth and space-to-space), powering on-orbit high-performance computing clusters (GPU/TPU), and providing secure, high bandwidth optical data transport. Export Control Requirement: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), applicants must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
Laser Electro-Optical Engineer / Scientist InertiaLaser Electro-Optical Engineer / ScientistLivermore, California$185,000–$275,000 / yearEmployment in this position is conditioned on the candidate’s eligibility for, obtaining and maintaining appropriate government authorization to access technology or information, to the extent required, including without limitation a security clearance, export license, or other documentation required to establish authorization to receive access to such items technology or information. This position requires access to technology, software and other information that is subject to governmental access control restrictions, due to export controls, security classification and/or designation as Controlled Unclassified Information.
Senior Manufacturing Engineer (Laser Welding) Procept Biorobotics CorpSenior Manufacturing Engineer (Laser Welding)San Jose, CA$131,060–$154,190 / yearIt continues with our one-of-a-kind management program designed to build the best managers in the industry, where our people managers across functions come together to exchange ideas and grow, as both managers and learners, in an environment that challenges, supports and broadens. It starts with our live induction program that serves as an incubator for cross-functional team building, an immersion in Procept's history, jam-packed interactive sessions with executive leadership and a crash-course in the mission and purpose of what we do.
Laser Design Engineer (Epi/Device) CspeedLaser Design Engineer (Epi/Device)Palo Alto, CaliforniaProficiency with commercial device simulation software used to support design decisions with production intent — including one or more of: traveling wave laser model tools (e.g., VPI Photonics, Lumerical INTERCONNECT, Photon Design HAROLD), waveguide and mode solvers (e.g., Ansys Lumerical MODE, Photon Design FIMMWAVE), grating/EME solvers, and band structure or gain simulation tools (e.g., Crosslight, SiLENSe, or equivalent); scripting in MATLAB or Python for simulation automation and data analysis. Design and optimize III-V heterostructures and multi-quantum well (MQW) active regions for laser, SOA, and electroabsorption modulator applications, with explicit consideration of growth tolerance, process variation, and production yield; develop and maintain active region simulation models using commercial tools (e.g., band structure solvers, 1-D optical confinement solvers, traveling wave laser models).