Technician - Test & Launch Blue Origin Enterprises LPTechnician - Test & LaunchHuntsville, ALand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Test Engineer - (108471) SanminaTest Engineer - (108471)Huntsville, ALFrom avionics to tactical and airborne communications, counter-UAS, integrated manufacturing and cradle-to-grave product life cycle support, we deliver high-reliability solutions that keep service members connected and protected in the field. Job DescriptionAt SCI Technology, a Sanmina Company, we serve those who serve by delivering innovative, trusted and comprehensive products and services that meet and exceed the unique needs of the Defense and Aerospace sector.
Construction Materials Testing (CMT) Laboratory Supervisor S&ME, Inc.Construction Materials Testing (CMT) Laboratory SupervisorHuntsville, ALFull timeAbout You:You have a minimum of 2 years of combined experience in geotechnical and construction materials testing and a supervisory, management, or leadership roleYou are proficient in computer technology and mechanical testing equipmentYou have a Bachelor's degree in Civil, Structural, or Geotechnical Engineering or other closely related technical fields, a plus but not requiredYou have active industry-related certifications, such as:American Concrete Institute (ACI): Field Testing Grade I; Strength Testing Technician; Aggregate Testing Technician; Laboratory Technician International Code Council (ICC): Special Inspector (Reinforced Concrete, Masonry, Soils)National Institute for Certification in Engineering Technologies (NICET): CMT-Soils; CMT-Concrete; CMT-AsphaltYou Are Willing and Able to:Perform the physical demands of the position with the use of company-provided Personal Protective Equipment, such as:Working most of the time in the office, but might be requested to work outdoors in varying weather conditionsWalking on a concrete/tile floor and standing for potentially up to 12 hours a dayLifting and carrying 40-50 lbs. Construction Materials Testing (CMT) Laboratory SupervisorRequisition Number: 2026-1470-14Are you a leader seeking a challenging opportunity to grow your career with a firm committed to our employees and providing high-quality service to our clients?
Test Engineer Sanmina CorpTest EngineerHuntsville, ALFrom avionics to tactical and airborne communications, counter-UAS, integrated manufacturing and cradle-to-grave product life cycle support, we deliver high-reliability solutions that keep service members connected and protected in the field. At SCI Technology, a Sanmina Company, we serve those who serve by delivering innovative, trusted and comprehensive products and services that meet and exceed the unique needs of the Defense and Aerospace sector.
Test Engineer - (108226) SanminaTest Engineer - (108226)Huntsville, ALFrom avionics to tactical and airborne communications, counter-UAS, integrated manufacturing and cradle-to-grave product life cycle support, we deliver high-reliability solutions that keep service members connected and protected in the field. Job DescriptionAt SCI Technology, a Sanmina Company, we serve those who serve by delivering innovative, trusted and comprehensive products and services that meet and exceed the unique needs of the Defense and Aerospace sector.
Test Engineer - (108225) SanminaTest Engineer - (108225)Huntsville, ALFrom avionics to tactical and airborne communications, counter-UAS, integrated manufacturing and cradle-to-grave product life cycle support, we deliver high-reliability solutions that keep service members connected and protected in the field. Job DescriptionAt SCI Technology, a Sanmina Company, we serve those who serve by delivering innovative, trusted and comprehensive products and services that meet and exceed the unique needs of the Defense and Aerospace sector.
Test Engineer - (108224) SanminaTest Engineer - (108224)Huntsville, ALFrom avionics to tactical and airborne communications, counter-UAS, integrated manufacturing and cradle-to-grave product life cycle support, we deliver high-reliability solutions that keep service members connected and protected in the field. Job DescriptionAt SCI Technology, a Sanmina Company, we serve those who serve by delivering innovative, trusted and comprehensive products and services that meet and exceed the unique needs of the Defense and Aerospace sector.
Production Test Engineer LeidosProduction Test EngineerHuntsville, AL$59,150–$106,925 / yearYou will be supporting a rapidly growing program and will work along a group of test engineers (electrical/mechanical) and test technicians, developing acceptance and qualification testing procedures for multiple electronic and mechanical components. Candidate will be part of a diverse team whose work will include setting up test equipment, performing functional testing of hardware, confirming software functionality, setting up dynamic/climatic test environments, and subsystem AI&T.
Test Operator II Benchmark Electronics IncTest Operator IIHuntsville, AL$15.83–$23.74 / hourWhen you join us, you become part of a team passionate about making a meaningful impact across various sectors, including commercial aerospace, defense, advanced computing, next-generation communications, complex industrials, medical, and semiconductor capital equipment. Follows step-by-step procedure while performing various duties such as frequency and/or voltage adjustment and observe meter reading to determine whether the item being tested meets minimum requirements specified in test procedure or test program.
Environmental Test Manager – Industrial Operations LeidosEnvironmental Test Manager – Industrial OperationsHuntsville, AlabamaLeidos’ Defense Systems / Manufacturing is seeking a talented and qualified Industrial Operations Environment Test Manager to join our Defense team in Huntsville, AL supporting the Common Hypersonic Glide Body (CHGB) Program. June 16, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.
Metrology & Test Equipment Services Lab Manager The Boeing CoMetrology & Test Equipment Services Lab ManagerHuntsville, AL$141,100–$190,900 / yearServices include: test asset selection and use, acquisition, allocation, resource and lifecycle management, calibration/certification for over 45,000 dimensional/optics, electrical/electronic and mechanical/physical measurement and test assets, sourcing management, measurement solutions, repair & maintenance and specialized test services. Candidates must have at least one year of experience in a leadership role (team leader, temp manager, large scale cross functional project/program management, or formal manager experience) OR have completed the Boeing internal course "Exploring Leadership".
Environmental Test Manager - Industrial Operations Leidos Holdings IncEnvironmental Test Manager - Industrial OperationsHuntsville, AL$92,300–$166,850 / yearLeidos' Defense Systems / Manufacturing is seeking a talented and qualified Industrial Operations Environment Test Manager to join our Defense team in Huntsville, AL supporting the Common Hypersonic Glide Body (CHGB) Program. For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.
Electronic Technician I Chenega Integrated Security SolutionsElectronic Technician IHuntsville, AlabamaFull timeOverview: Chenega Integrated Security Solutions is seeking a motivated Electronic Technician I to support the installation, maintenance, and troubleshooting of secure electronic and communications systems for a government customer. Conduct testing and diagnostics using electronic test equipment such as multimeters, signal generators, semiconductor testers, curve tracers, and oscilloscopes.
Electronic Technician I Chenega CorporationElectronic Technician IHuntsville, ALChenega Integrated Security Solutions is seeking a motivated Electronic Technician I to support the installation, maintenance, and troubleshooting of secure electronic and communications systems for a government customer. Conduct testing and diagnostics using electronic test equipment such as multimeters, signal generators, semiconductor testers, curve tracers, and oscilloscopes.
RF Test Engineer TSCRF Test EngineerHuntsville, AlabamaServes as the technical authority for production RF performance, test strategy, and yield optimization across defense RF systems including seekers, proximity sensors, height-of-burst sensors, antennas, and RF subsystems. Deep understanding of RF system performance including: gain/loss/dynamic range, noise figure and sensitivity, linearity and compression, phase noise and stability, and spurious/interference mechanisms.
Sr. Electronic Technician Adtran Holdings IncSr. Electronic TechnicianHuntsville, ALPerform minor touch-ups and repairs on through-hole (PTH) and surface-mount technology (SMT) components as needed. The Electronic Technician is responsible for troubleshooting, diagnosing, and repairing ADTRAN production units at the component level.
Sr. Electronic Technician ADTRANSr. Electronic TechnicianHuntsville, ALPerform minor touch-ups and repairs on through-hole (PTH) and surface-mount technology (SMT) components as needed. The Electronic Technician is responsible for troubleshooting, diagnosing, and repairing ADTRAN production units at the component level.
Lead Test Engineer Invariant CorporationLead Test EngineerHuntsville, ALABAMALead test planning, procedure development, and execution of environmental and EMC/EMI tests per MIL-STD-810 and MIL-STD-461 requirements. Preferred qualifications include familiarity with some or all, of the following: Experience supporting Army or Marine Corps platforms (e.g., vehicles, communication systems).
Test Engineer Invariant CorporationTest EngineerHuntsville, ALABAMALead test planning, procedure development, and execution of environmental and EMC/EMI tests per MIL-STD-810 and MIL-STD-461 requirements. Preferred qualifications include familiarity with some or all, of the following: Experience supporting Army or Marine Corps platforms (e.g., vehicles, communication systems).
Manager - Test Operations Maintenance Blue Origin Enterprises LPManager - Test Operations MaintenanceHuntsville, ALand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing, vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.