Manufacturing Technology Leader Amrize LtdManufacturing Technology LeaderIARemoteABOUT THE ROLE: The Isocyanurate Technology Leader will develop and improve the polyisocyanurate insulation board manufacturing process in the ISO facilities within Amrize. Employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit test.
Principal Advanced Manufacturing Engineer - Design for Automation (Onsite) RTX CorpPrincipal Advanced Manufacturing Engineer - Design for Automation (Onsite)West Des Moines, IAIn this role you'll collaborate with cross-functional teams across the site and enterprise to deliver intelligent automation systems, increase visibility, and enable data-driven decision-making across our operations. Participate in Design for Manufacturing (DFM) and Design for Automation (DFA) initiatives, providing manufacturing and automation expertise to ensure next-generation products are designed for efficient automation.
Manufacturing - Maintenance Supervisor Economy Forms CorpManufacturing - Maintenance SupervisorDes Moines, IAOccasionallyRotation in Standing: OccasionallyElevated Work: RarelySquatting: OccasionallyKneeling: OccasionallyStatic postures: Occasionally to FrequentlyReaching: OccasionallyCrouching: OccasionallyCapacity to think, concentrate and focus for long periods of time: FrequentlyAbility to read complex documents in the English language: FrequentlyCapacity to reason and make sound decisions: FrequentlyAbility to write complex documents in the English language: FrequentlyCapacity to express thoughts orally: FrequentlyFloor to waist vertical lift: Frequently 25 lbs, occasionally up to 50 lbsWaist to chest vertical lift: Frequently 25 lbs, occasionally up to 50 lbsHorizontal carry: Frequently 25 lbs, Occasionally up to 50 lbs for 10 feetOne hand carry: Frequently 25 lbs, Occasionally up to 50 lbs for 10 feetPush horizontally: Frequently 25 lbs, Occasionally 50 lbsPull horizontally: Frequently 25 lbs, Occasionally 50 lbsOne hand pull right hand: Frequently 25 lbs, Occasionally 50 lbs for 20 ftOne hand pull left hand: Frequently 25 lbs, Occasionally 50 lbs for 20 ftLeft hand repetitive coupling: Frequently 50 lbs, Occasionally up to 65 lbsRight hand repetitive coupling: Frequently 50 lbs, Occasionally up to 65 lbs. This includes always wearing required personal protective equipment; participating in safety training; engaging in and supporting safety activities including reporting hazards, unsafe work practices & near misses, incidents involving property damage, and any / all injuries - no matter how minor - immediately to their supervisor or manager.
Manufacturing Supervisor I (1st Shift) Andersen CorporationManufacturing Supervisor I (1st Shift)Des Moines, IowaThe Manufacturing Supervisor (internally known as Value Stream Supervisor I) supports the Value Stream Manager in driving the process of continuous improvement for a small/stable value stream (procurement to delivery). Our portfolio of brands — Andersen Windows & Doors, Renewal by Andersen and Fenetres MQ — is crafted to serve customers across the new residential, home improvement and light commercial building sector.
Manufacturing Engineer Hearth & Home TechnologiesManufacturing EngineerIowaHeadquartered in Lakeville, Minnesota, with distribution around the world, our innovative approach is supported by a business unit structure that allows us to develop and market products with a strong focus on customers’ needs. We are the nation’s leading manufacturer and supplier of hearth products, including a wide variety of gas, electric, wood and pellet burning fireplaces, inserts, stoves, and accessories.
Principal Advanced Manufacturing Engineer - Design for Automation (Onsite) RTXPrincipal Advanced Manufacturing Engineer - Design for Automation (Onsite)IowaIn this role you’ll collaborate with cross-functional teams across the site and enterprise to deliver intelligent automation systems, increase visibility, and enable data-driven decision-making across our operations. Participate in Design for Manufacturing (DFM) and Design for Automation (DFA) initiatives, providing manufacturing and automation expertise to ensure next-generation products are designed for efficient automation.
Manufacturing Technician - 2nd Shift Apollo Professional SolutionsManufacturing Technician - 2nd ShiftWest Des Moines, IAMechanical Manufacturing Technician I is expected to have the basic level ability to prepare and assemble components to develop final or sub-assemblies with direct supervision by a certified calibrator (Mechanical Manufacturing Technician level II or above). The operator will set up and operate production equipment to ensure flow, spray angle, and quality of spray meets product specifications and tolerance levels.
Manufacturing - Inspector Economy Forms CorpManufacturing - InspectorDes Moines, IAFrom engineering and design to manufacturing and field support, we help customers turn vision into reality while achieving the Lowest In-Place Concrete Cost (LIPCC).EFCO's Culture StatementAct with INTEGRITY by demonstrating honesty, responsibility, trustworthiness, and respect in all actions. Tape measureSquareShop drawingsEFCO labelsInk rollersStraight edgeStencil machineStencilsWork order cardsMaterial handling equipmentBanding equipment.
Director of Manufacturing Robinson, Inc.Director of ManufacturingAltoona, IAPart timeThe Director of Manufacturing is responsible for effectively managing the overall production of manufactured goods at our Altoona, Iowa facility and managing the significant potential for future production growth. Robinson Inc is opening a brand-new manufacturing facility in Altoona, Iowa, set to open in early 2027, and we’re looking for a dynamic Director of Manufacturing to lead the charge.
Senior Manager, Oracle SCM (Order Management, Manufacturing, Costing) PricewaterhouseCoopers LLPSenior Manager, Oracle SCM (Order Management, Manufacturing, Costing)Des Moines, IA$124,000–$280,000 / yearExamples of the skills, knowledge, and experiences you need to lead and deliver value at this level include but are not limited to: Craft and convey clear, impactful and engaging messages that tell a holistic story. PwC does not intend to hire experienced or entry level job seekers who will need, now or in the future, PwC sponsorship through the H-1B lottery, except as set forth within the following policy: https://pwc.to/H-1B-Lottery-Policy .
Manufacturing - Cad/Cam Programmer Economy Forms CorpManufacturing - Cad/Cam ProgrammerDes Moines, IAThis includes always wearing required personal protective equipment; participating in safety training; engaging in and supporting safety activities including reporting hazards, unsafe work practices & near misses, incidents involving property damage, and any / all injuries - no matter how minor - immediately to their supervisor or manager. Essential FunctionsCAD/CAM Programming (60%) Use CAM Software to convert CAD files to machine programs for machines such as CNC Lasers (2D flat and 3D tube), Plasmas (5-axis) and CNC Press Brakes.
Manufacturing Technician, 2nd Shift Butler America Aerospace LLCManufacturing Technician, 2nd ShiftWest Des Moines, IA$17–$20 / hourThe purpose for an Manufacturing Tech is to train/learn the basic understandings of either Assembly or Machine Operations, Operates production equipment. Mechanical Manufacturing Technician / Assembly / Machine Operations is an Entry-Level Manufacturing Tech Trainee position.
Manufacturing - Welder II Economy Forms CorpManufacturing - Welder IIDes Moines, IAStanding: Frequently to ContinuouslySitting: Rarely to ContinuouslyWalking: FrequentlyForward bend in standing: Occasionally to FrequentlyRotation in standing: OccasionallySquatting: Occasionally to FrequentlyKneeling: Occasionally to FrequentlyStooping: Occasionally to frequentlyStatic postures: Occasionally to FrequentlyRight-hand Left-hand coordination: continuous with average eye/hand coordinationReaching: FrequentlyCrawling: OccasionallyCrouching: Occasionally to FrequentlyRepetitive Motions- Shoulders, elbows, wrists, hands, fingers: Frequently to ContinuouslyElevated work: Crown level 5 lbs up to 2 mins occasionally, and rarely 20 lbs up to 20 secsFloor to waist vertical lift: Frequently 25 lbs, occasionally up to 50 lbsWaist to crown vertical lift: Frequently 25 lbs, occasionally up to 50 lbsHorizontal carry: Frequently 25 lbs, Occasionally up to 50 lbs for 25 feetOne hand carry: Frequently 25 lbs, Occasionally up to 50 lbs for 25 feetPush horizontally: Frequently 25 lbs, Occasionally 50 lbs, and Rarely up to 70 lbs for 20 feetPull horizontally: Frequently 25 lbs, Occasionally 50 lbs, and Rarely up to 70 lbs for 20 feetOne hand pull right hand: Frequently 25 lbs, Occasionally 50 lbs for 20 ftOne hand pull left hand: Frequently 25 lbs, Occasionally 50 lbs for 20 ftLeft hand repetitive coupling: Frequently 65 lbs, Occasionally up to 80 lbsRight hand repetitive coupling: Frequently 65 lbs, Occasionally up to 80 lbsExpertise in: Ability to regularly perform all job functions at company office or worksiteAbility to withstand environmental conditions such as extreme heat or cold, grass, wind, sand, fumes, odors, gases, noises. This includes always wearing required personal protective equipment; participating in safety training; engaging in and supporting safety activities including reporting hazards, unsafe work practices & near misses, incidents involving property damage, and any / all injuries - no matter how minor - immediately to their supervisor or manager.
Manufacturing - Welder II - 2Nd Shift Economy Forms CorpManufacturing - Welder II - 2Nd ShiftDes Moines, IAStanding: Frequently to ContinuouslySitting: Rarely to ContinuouslyWalking: FrequentlyForward bend in standing: Occasionally to FrequentlyRotation in standing: OccasionallySquatting: Occasionally to FrequentlyKneeling: Occasionally to FrequentlyStooping: Occasionally to frequentlyStatic postures: Occasionally to FrequentlyRight-hand Left-hand coordination: continuous with average eye/hand coordinationReaching: FrequentlyCrawling: OccasionallyCrouching: Occasionally to FrequentlyRepetitive Motions- Shoulders, elbows, wrists, hands, fingers: Frequently to ContinuouslyElevated work: Crown level 5 lbs up to 2 mins occasionally, and rarely 20 lbs up to 20 secsFloor to waist vertical lift: Frequently 25 lbs, occasionally up to 50 lbsWaist to crown vertical lift: Frequently 25 lbs, occasionally up to 50 lbsHorizontal carry: Frequently 25 lbs, Occasionally up to 50 lbs for 25 feetOne hand carry: Frequently 25 lbs, Occasionally up to 50 lbs for 25 feetPush horizontally: Frequently 25 lbs, Occasionally 50 lbs, and Rarely up to 70 lbs for 20 feetPull horizontally: Frequently 25 lbs, Occasionally 50 lbs, and Rarely up to 70 lbs for 20 feetOne hand pull right hand: Frequently 25 lbs, Occasionally 50 lbs for 20 ftOne hand pull left hand: Frequently 25 lbs, Occasionally 50 lbs for 20 ftLeft hand repetitive coupling: Frequently 65 lbs, Occasionally up to 80 lbsRight hand repetitive coupling: Frequently 65 lbs, Occasionally up to 80 lbsExpertise in: Ability to regularly perform all job functions at company office or worksiteAbility to withstand environmental conditions such as extreme heat or cold, grass, wind, sand, fumes, odors, gases, noises. Education: High school diploma or equivalentSkills & Experience: Proficiency in MIG welding processes; Ability to read and interpret mechanical drawings; Pass EFCO's weld test; Experience with aluminum, high tensile, and flux-core wire; Familiarity with measuring tools down to 1/64 inch.
Manufacturing - Welder II EFCO Corp.Manufacturing - Welder IIDes Moines, IAThis includes always wearing required personal protective equipment; participating in safety training; engaging in and supporting safety activities including reporting hazards, unsafe work practices & near misses, incidents involving property damage, and any / all injuries - no matter how minor - immediately to their supervisor or manager. This includes always wearing required personal protective equipment; participating in safety training; engaging in and supporting safety activities including reporting hazards, unsafe work practices & near misses, incidents involving property damage, and any/all injuries - no matter how minor - immediately to their supervisor or manager.
Manufacturing - Welder II - 2nd Shift EFCO Corp.Manufacturing - Welder II - 2nd ShiftDes Moines, IAThis includes always wearing required personal protective equipment, participating in safety training, engaging in and supporting safety activities, including reporting hazards, unsafe work practices, and near misses, incidents involving property damage, and any injuries - no matter how minor - immediately to their supervisor or manager. Perform production welding tasks using MIG equipment, build complex forms and weldments with or without fixtures, and contribute to form maintenance and quality assurance to support manufacturing operations.
Director of Manufacturing RobinsonDirector of ManufacturingAltoona, IowaThe Director of Manufacturing is responsible for effectively managing the overall production of manufactured goods at our Altoona, Iowa facility and managing the significant potential for future production growth. Robinson Inc is opening a brand-new manufacturing facility in Altoona, Iowa, set to open in early 2027, and we’re looking for a dynamic Director of Manufacturing to lead the charge.
Manufacturing - General Maintenance Helper EFCO Corp.Manufacturing - General Maintenance HelperDes Moines, IAThis includes always wearing required personal protective equipment; participating in safety training; engaging in and supporting safety activities including reporting hazards, unsafe work practices & near misses, incidents involving property damage, and any / all injuries - no matter how minor - immediately to their supervisor or manager. This includes always wearing required personal protective equipment; participating in safety training; engaging in and supporting safety activities including reporting hazards, unsafe work practices & near misses, incidents involving property damage, and any/all injuries - no matter how minor - immediately to their supervisor or manager.
Manufacturing - Inspector EFCO Corp.Manufacturing - InspectorDes Moines, IAThis includes always wearing required personal protective equipment; participating in safety training; engaging in and supporting safety activities including reporting hazards, unsafe work practices & near misses, incidents involving property damage, and any / all injuries - no matter how minor - immediately to their supervisor or manager. This includes always wearing required personal protective equipment; participating in safety training; engaging in and supporting safety activities including reporting hazards, unsafe work practices & near misses, incidents involving property damage, and any/all injuries - no matter how minor - immediately to their supervisor or manager.
Manufacturing - CNC Operator EFCO Corp.Manufacturing - CNC OperatorDes Moines, IAThis includes always wearing required personal protective equipment, participating in safety training, engaging in and supporting safety activities, including reporting hazards, unsafe work practices, & near misses, incidents involving property damage, and any injuries - no matter how minor - immediately to their supervisor or manager. At EFCO, the health and safety of our team members, visitors, and contractors is an overriding priority, and EFCO is committed to promoting a safe and healthy work environment by requiring all team members to participate in environmental safety and health program activities.