Engineer II - Manufacturing Engineer - Med Device FLEX VascularEngineer II - Manufacturing Engineer - Med DevicePlymouth, MNWorking within established procedures and under general supervision, the Engineer role II independently executes defined engineering projects — including test method development, process and equipment qualification, fixture design, and technical investigations — and documents the results in compliance with the Quality Management System and applicable regulatory requirements. * Provide project support including device and component testing, protocol authoring, documentation of test results, data analysis, and preparation of technical reports in accordance with design control procedures.
Sales Coordinator / Liaison (manufacturing company) 1st St. NW Technical StaffingSales Coordinator / Liaison (manufacturing company)Anoka, MN$54,000–$56,000 / yearFacilitate customer inquiries pertaining to Service Division – includes parts work order, shipping status, service & warranty work orders, installation work orders, damage claims, etc. Under the direction of the director of industrial sales, facilitate inside and outside sales operations with internal resources.
Manufacturing Supervisor* (7 days on 7 days off Rotating Days/Midnights) - Cottage Grove, MN 3MManufacturing Supervisor* (7 days on 7 days off Rotating Days/Midnights) - Cottage Grove, MNCottage Grove, MN$95,591–$116,834 / yearTo set you up for success in this role from day one, 3M requires (at a minimum) the following qualifications: Bachelor’s degree or higher (completed and verified prior to start) from an accredited institution and a minimum of two (2) years of combined experience working in a manufacturing or production environment in a private, public, government or military setting. High School diploma/GED or higher (completed and verified prior to start) from an accredited institution and a minimum of four (4) years of combined experience working in a manufacturing or production environment in a private, public, government or military setting.
NewManufacturing Supervisor* (7 days on 7 days off Rotating Shifts Days/Midnights) - Cottage Grove, MN 3MManufacturing Supervisor* (7 days on 7 days off Rotating Shifts Days/Midnights) - Cottage Grove, MNCottage Grove, MN$95,591–$116,834 / yearTo set you up for success in this role from day one, 3M requires (at a minimum) the following qualifications: Bachelor’s degree or higher (completed and verified prior to start) from an accredited institution and a minimum of two (2) years of combined experience working in a manufacturing or production environment in a private, public, government or military setting. High School diploma/GED or higher (completed and verified prior to start) from an accredited institution and a minimum of four (4) years of combined experience working in a manufacturing or production environment in a private, public, government or military setting.
NewManufacturing Team Member II- Molding IntegerManufacturing Team Member II- MoldingBrooklyn Park, MN$19.04–$27.92 / hourAccountabilities & Responsibilities: Adheres to Integer Values and all safety, environmental, security and quality requirements including, but not limited to: Quality Management Systems (QMS), Safety, Environmental and Security Management Systems, U.S. Food and Drug Administration (FDA) regulations, company policies and operating procedures, and other regulatory requirements. Our compensation program includes base wages, a cash-based incentive program supporting our pay-for-performance philosophy, overtime pay, shift differentials, and call-in pay, when applicable.
NewManufacturing Team Member II IntegerManufacturing Team Member IIBrooklyn Park, MNAccountabilities & Responsibilities: Adheres to Integer Values and all safety, environmental, security and quality requirements including, but not limited to: Quality Management Systems (QMS), Safety, Environmental and Security Management Systems, U.S. Food and Drug Administration (FDA) regulations, company policies and operating procedures, and other regulatory requirements. Our compensation program includes base wages, a cash-based incentive program supporting our pay-for-performance philosophy, overtime pay, shift differentials, and call-in pay, when applicable.
NewManufacturing Team Member II - Molding IntegerManufacturing Team Member II - MoldingBrooklyn Park, MN$19.04–$27.92 / hourAccountabilities & Responsibilities: Adheres to Integer Values and all safety, environmental, security and quality requirements including, but not limited to: Quality Management Systems (QMS), Safety, Environmental and Security Management Systems, U.S. Food and Drug Administration (FDA) regulations, company policies and operating procedures, and other regulatory requirements. Our compensation program includes base wages, a cash-based incentive program supporting our pay-for-performance philosophy, overtime pay, shift differentials, and call-in pay, when applicable.
Staff Manufacturing Scientist DanaherStaff Manufacturing ScientistChaska, Minnesota$115,000–$145,000 / yearBachelor’s degree in Biology or a related technical field with a minimum of 9+ years of relevant experience, or a Master’s degree in a related field with at least 7+ years of relevant experience, or a Doctoral degree in a related field with a minimum of 4+ years of relevant experience. The Staff Manufacturing Scientist is responsible for responsible for leading and supporting complex multi-site consumable manufacturing and process improvement projects that deliver value to the company and meet cost, quality, and delivery objectives.
Architectural Project Manager - Manufacturing/Industrial Colliers Engineering & DesignArchitectural Project Manager - Manufacturing/IndustrialMinneapolis, Minnesota$75,000–$100,000 / yearFull timeYou will be working in our Client Programs (CP) Market, where you will have the unique opportunity to work on global and national building programs with a focus on project and client leadership through all phases of design and delivery. Overview: MG2, an affiliate of Colliers Engineering & Design is currently looking for an Architectural Project Manager - Manufacturing/Industrial to join our Client Programs Market team in Minneapolis, MN!
Director Vertical - Industrial Manufacturing And Aerospace C.H. Robinson Worldwide, Inc.Director Vertical - Industrial Manufacturing And AerospaceEden Prairie, MN$127,500–$295,900 / yearRobinson is seeking a dynamic, data‑driven, and strategically minded leader to serve as the Director Vertical - Industrial Manufacturing & Aerospace within our North America Surface Transportation (NAST) division. Your individual base pay within this range is determined by work location, which takes into account geographic cost of labor, and additional factors, including job-related skills, experience, and relevant education or training.
Principal Manufacturing Engineer Laborie Medical Technologies CorpPrincipal Manufacturing EngineerPlymouth, MinnesotaThe Principal Manufacturing Engineer is a highly experienced, professional recognized as a submit matter expert across the organization, influencing company-wide operations strategies, drives functional initiatives, and will mentor junior engineers. Own design transfer and production readiness, collaborating cross-functionally to implement new products and updates while training and mentoring technicians and engineering teams.
Warehouse Attendant Williams AVWarehouse AttendantEden Prairie, MNFull timeResponsibilities: Receive and inspect incoming shipments verifying contents against packing slips and invoicesAccurately pick, pack and prepare customer orders for shipment or deliveryAccurately pick and stage components and materials for production orders in accordance with daily manufacturing schedules and bill of materials requirementsLabel and store items in designated locationsProcess receipts and inventory transactions using the ERP systemAssist in inventory counts and maintain accurate recordsOperate forklift, pallet jack or other warehouse equipment safely and properlyReport inventory discrepancies, damages, or safety hazards to SupervisorSupport loading/unloading of trucks and containers as neededMaintain cleanliness and organization of warehouse aisles, docks and storage areasComply with all safety guidelines, policies and proceduresAssist with other tasks as directed by SupervisorRequired Qualifications:High School diploma or equivalentAbility to accurately perform receiving, inventory and material handling tasks1-2 Years of warehouse, shipping and receiving experience1-2 Years ERP system experience, Epicor preferredPhysical RequirementThis position requires frequent standing, walking, bending, reaching above shoulder level, and occasional lifting and carrying up to 50-75lbs. This role is responsible for unloading and inspecting incoming shipments, accurately recording received goods, organizing inventory and performing regular cycle counts to ensure stock integrity.
Warehouse Supervisor Advance ServicesWarehouse SupervisorPrescott, WIIn this role, you'll oversee daily warehouse activities, manage inventory, supervise warehouse associates, and help maintain a clean, organized, and productive work environment. Must have sufficient vision to safely perform warehouse duties, including close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.
Sr. Project Manager Curtiss-Wright CorporationSr. Project ManagerChanhassen, MN$110,000–$130,000 / yearYou will focus on coordinating engineering tasks, tracking progress, identifying issues, supporting risk mitigation, and ensuring alignment with program goals across multiple actuator platforms. Curtiss-Wright manufactures Exlar® electromechanical linear roller screw actuators, rotary servo motors, and integrated control solutions for a broad range of applications.
Account Manager CONVERGIX Automation SolutionsAccount ManagerMinneapolis, MN5+ years selling complex capital equipment, engineered solutions, or technical B2B services - automation/robotics experience preferred; equally strong candidates from capital equipment, industrial machinery, enterprise software, semiconductor tools, medical/scientific instruments, or other consultative technical sales environments. Our Sales team enjoys unparalleled support, including hands-on guidance from Executive leadership throughout the sales process, cutting-edge technical expertise from our Applications engineers, and seamless execution and delivery through strong partnerships with our operations team.
Production Supervisor (2Nd Shift) Banner EngineeringProduction Supervisor (2Nd Shift)Minneapolis, MNFor over 50 years, Banner Engineering has been at the forefront of some of the biggest industry trends, such as the Industrial Internet of Things (IIoT), and our photoelectric, ultrasonic, and vision sensors, LED lights and indicators, monitoring solutions, and other safety products are used by Fortune 500 companies and industry leaders worldwide. Monitor and review performance daily to ensure productivity goals are met- coach employees to improve productivity while maintaining a positive work environment -organize necessary corrective action for improvement as needed.
Research Professor and Assistant Director, Center for Microgrid Research University of St ThomasResearch Professor and Assistant Director, Center for Microgrid ResearchSt. Paul, Minnesota$80,000–$100,000 / yearSupported by over $28 million in federal and state funding from agencies such as the NSF, DOD, and Minnesota Department of Commerce, the Center operates one of the nation’s most advanced campus microgrids—spanning more than 2.2 MW of generation capacity, five interconnected buildings, and four utility tie points. This position will work closely with the Center’s Director and collaborate closely with faculty, industry partners, and students to lead high-impact projects in microgrids, distributed energy systems, and grid modernization.
Production Planning & Inventory Control Specialist Ultimate Staffing ServicesProduction Planning & Inventory Control SpecialistMinnetonka, Minnesota$28–$30 / hourThe ideal candidate has experience working in a manufacturing environment and is comfortable using an ERP system-ideally Sage X3 -to manage production planning, inventory control, and purchasing activities. Maintain accurate item master data, bills of material (BOMs), routings, lead times, and planning parameters .