Advanced Manufacturing Technician Bowhead / UIC Technical ServicesAdvanced Manufacturing TechnicianAberdeen, MDOperate, maintain, troubleshoot, and optimize advanced manufacturing equipment, including additive manufacturing systems (3D printers), thermal spray equipment, CNC machine tools, and robotic platforms in accordance with established procedures and guidance from technical staff. This position provides hands-on support for laboratory operations, advanced manufacturing activities, and materials testing to support development of critical technologies for the Army.
Manufacturing Technology Leader Amrize LtdManufacturing Technology LeaderMDRemoteABOUT THE ROLE: The Isocyanurate Technology Leader will develop and improve the polyisocyanurate insulation board manufacturing process in the ISO facilities within Amrize. Employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit test.
NewManaging Director, Manufacturing Operations Advisory and Business Development FTE Factory AdvisorsManaging Director, Manufacturing Operations Advisory and Business DevelopmentWashington, DC$20,000You will help clients solve complex operational challenges while partnering across the broader Factory Transformation organization to integrate Digital Transformation and Approachable AI solutions where they create additional value. Proven success building, developing, and leading high-performing teams while coaching senior leaders and creating a culture of accountability, continuous improvement, and operational excellence.
Senior Manager, Manufacturing IT Analog DevicesSenior Manager, Manufacturing ITUs, WashingtonDrive adoption of advanced analytics, machine learning, and emerging agentic AI capabilities to enable real-time decision-making, automate factory workflows (e.g., excursion triage, lot disposition, tool optimization), and improve yield, cycle time, and operational resiliency, aligned with ADI’s broader smart factory and AI strategy. Act as a key leader within the global Manufacturing IT organization, contributing to strategy, driving cross-site initiatives, and ensuring Camas both influences and adopts enterprise capabilities in areas such as automation, paperless manufacturing, data platforms, and AI.
Chemistry, Manufacturing and Controls (CMC) Senior Lead Sia Partners SASChemistry, Manufacturing and Controls (CMC) Senior LeadBaltimore, MD$180,000–$200,000 / yearThis consulting division works with healthcare organizations, pharmaceutical & biotech companies, CROs, academia, medical device/diagnostic companies, and non-governmental organizations (NGOs) alike to solve complex business, scientific, regulatory, technological and product development challenges. This individual will work closely with the Managing Director, functional area leads across Regulatory, Quality, Nonclinical, Discovery, Clinical, Project Management, and Government Services, as well as external CDMO partners and regulatory agencies.
Chemistry, Manufacturing and Controls (CMC) Lead Sia Partners SASChemistry, Manufacturing and Controls (CMC) LeadBaltimore, MD$164,000–$173,000 / yearThis consulting division works with healthcare organizations, pharmaceutical & biotech companies, CROs, academia, medical device/diagnostic companies, and non-governmental organizations (NGOs) alike to solve complex business, scientific, regulatory, technological and product development challenges. This individual will work closely with the Managing Director, functional area leads across Regulatory, Quality, Nonclinical, Discovery, Clinical, Project Management, and Government Services, as well as external CDMO partners and regulatory agencies.
Princ Manufacturing Project Engineer/Sr. Princ Manufacturing Project Eng 3/4 Northrop Grumman CorpPrinc Manufacturing Project Engineer/Sr. Princ Manufacturing Project Eng 3/4Baltimore, MD$98,900–$148,300 / yearcollaborating closely with process engineers, functional groups supporting the shop floor (quality engineering, manufacturing supervision, production, operations, design engineering, program management), the program office, and the customer to ensure manufacturing plan is defined and executed; leading efforts to remove obstacles and constraints to execution. This requisition may be filled as a Principal Manufacturing Project Engineer 3 or a Senior Principal Manufacturing Project Engineer 4. Basic Qualifications for a Principal Manufacturing Project Engineer 3: Bachelor's degree in Engineering or other related STEM area and at least 5+ years of experience in Manufacturing/Process Engineering, Production, or related area - OR - a Master's degree with 3+ years of experience.
Manufacturing Technician III Karwell TechnologiesManufacturing Technician IIISparks, MDJob Overview We are seeking detail-oriented Scientific Operations/ Manufacturing Technician III to support the manufacturing and assembly of clinical and commercial products in a regulated laboratory environment. The ideal candidate is proactive, collaborative, and committed to maintaining operational excellence while adhering to Good Manufacturing Practices (GMP).
Blood Component Manufacturing Technician American Red Cross Blood ServicesBlood Component Manufacturing TechnicianBaltimore, MDAmeriCorps, the federal agency that brings people together through service, and its partners - the Peace Corps, AmeriCorps Alums, National Peace Corps Association, and the Service Year Alliance - launched Employers of National Service to connect national service alumni with opportunities in the workforce. Good computer skills, ability to use a wide variety of programs and laboratory equipment, attention to detail, accurate documentation, and good decision-making skills.
Manufacturing Technician III Katalyst Healthcares & Life SciencesManufacturing Technician IIISparks, MDWe are seeking detail-oriented Scientific Operations/ Manufacturing Technician III to support the manufacturing and assembly of clinical and commercial products in a regulated laboratory environment. The ideal candidate is proactive, collaborative, and committed to maintaining operational excellence while adhering to Good Manufacturing Practices (GMP).
Manufacturing Production Technician Plastipak Packaging, Inc.Manufacturing Production TechnicianHavre de Grace, MDFull timeAs a Production Technician, you operate equipment to manufacture plastic containers for leading consumer brands. Monitor machine settings (heat control, water cooling temperatures, hydraulic pressure).
SAP Manufacturing Senior Manager PricewaterhouseCoopers LLPSAP Manufacturing Senior ManagerWashington, DC$124,000–$280,000 / yearAs a SAP Manufacturing Senior Manager, you will specialize in providing consulting services for SAP supply chain and operations applications, enabling clients to optimize their supply chain processes and improve operational efficiency. Preference for a Master''s or Masters of Business Administration degree in at least one of the following fields of study:Business Administration/Management, Computer Science/Information Systems, Engineering, Operations/Supply Chain, Science.
Director- Manufacturing Quality Assurance Blue OriginDirector- Manufacturing Quality AssuranceWashingtonWe are looking for an individual that can implement innovative quality management system solutions, supporting accelerated manufacturing production, innovative technology and research activities, as well as efficient, predictable production capable solutions that will support sub-orbital & orbital manufacturing & launch. This role is part of the Safety, Quality, and Mission Assurance team, which focuses on monitoring and assessing processes that guide Blue Origin design, manufacture, and operations, ensuring system safety engineering, environmental health and safety, product integrity, and continuous improvement processes serve the Blue Origin Mission and Vision.
Manufacturing Program Manager ST Engineering North AmericaManufacturing Program ManagerBaltimore, MD$88,200–$141,300 / yearA pioneer in the production and assembly of complex aerostructures including aircraft and rocket components, engine nacelle systems, thrust reversers and advanced composite products, we apply the latest digital technologies and automation in composite design and manufacturing that are second to none. From the first flight across the Pacific Ocean to developing highly complex structures for the most popular aircraft in the world, we have come a long way always with a can-do approach to problem solving while delighting customers with our high say-do ratio.
Manufacturing Professional Training Lead / Staff Project Manager Northrop Grumman CorpManufacturing Professional Training Lead / Staff Project ManagerBaltimore, MD$126,400–$219,500 / yearThe Manufacturing Professional Training Lead owns the end‑to‑end learning strategy for all manufacturing support functions (industrial engineering, manufacturing engineering, production control, etc.) This role designs, delivers, and continuously improves professional‑development programs that enhance technical competence, safety awareness, and leadership capabilities, ensuring the workforce can meet current production demands and future growth initiatives. This training professional will collaborate with instructional design staff and subject matter experts to identify, plan, create, design, test, implement, deliver, support, and maintain effective and engaging learning opportunities and training activities through a variety of modalities (self-paced, in-person, mobile, virtual, video, job aids, microlearning, articles, etc.).
Manufacturing Supervisor Front Line Leader - 2nd Shift Eaton Corporation PlcManufacturing Supervisor Front Line Leader - 2nd ShiftBeltsville, MD$99,000–$125,000 / yearWhat you'll do: The Front Line Leader is responsible for directing the daily activities and development of 15-40 hourly employees while also acting as the operations leader within the integrated process team, which includes manufacturing engineering, quality control, human resources, and materials and logistics. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Senior Manager Production, Manufacturing Operations Analog DevicesSenior Manager Production, Manufacturing OperationsUs, WashingtonReporting to the Wafer Fab General Manager, the Senior Manager, Production – Fab Operations will lead our ~300‑employee Production organization—including Production Managers, Supervisors, Trainers, 5S & Continuous Improvement, New Product Technicians, Leads, and Operators—who execute day‑to‑day manufacturing, testing, and shipping of a broad product portfolio as the fab continues to ramp, expand, and modernize a facility with over 25 years of operational history. ADI combines analog, digital, and software technologies into solutions that help drive advancements in digitized factories, mobility, and digital healthcare, combat climate change, and reliably connect humans and the world.
NewSenior Manufacturing Engineer- Composites Rocket Lab CorpSenior Manufacturing Engineer- CompositesMiddle River, MD$115,000–$144,000 / yearImportant information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope.
Senior Manufacturing Engineer, Machining Rocket Lab CorpSenior Manufacturing Engineer, MachiningMiddle River, MD$108,000–$200,000 / yearImportant information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope.
Manufacturing Engineer Caltek StaffingManufacturing EngineerBaltimore, MD$110,000–$125,000 / yearThis position is highly visible within the organization and requires a hands-on engineer who is comfortable spending significant time on the manufacturing floor troubleshooting production issues, validating processes, and identifying opportunities for operational improvement. The Manufacturing Engineer III will support manufacturing operations by developing and implementing production methods, improving manufacturing processes, optimizing equipment utilization, and driving continuous improvement initiatives throughout the facility.
Manufacturing Associate Tournesol SiteworksManufacturing AssociateWashingtonAs a Production Worker, you will work under the direction of the Production Leads and directly with the Production Manager processing steel and wood using saws, rolling equipment, drills, punches, grinders and other processing equipment. Other physical demands may include reaching, bending, stooping, and working in various environmental conditions like temperature variations, dust, or noise levels.
Manufacturing Engineer III (Multiple Shifts) - Lunar Blue OriginManufacturing Engineer III (Multiple Shifts) - LunarWashingtonand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Manufacturing Engineer Sr (Multiple Shifts) - Lunar Blue OriginManufacturing Engineer Sr (Multiple Shifts) - LunarWashingtonand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Manufacturing Engineer II - Electronics Fabrication Blue OriginManufacturing Engineer II - Electronics FabricationWashingtonand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. As part of a highly collaborative team, you will serve as a key technical interface between the production value stream and design engineering, ensuring smooth execution of hardware builds, rapid issue resolution, and continuous improvement across manufacturing processes.
NewManufacturing Engineer II (Multiple Shifts) - Lunar Blue OriginManufacturing Engineer II (Multiple Shifts) - LunarWashingtonand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Manufacturing Engineer II - Weld and Tank Blue OriginManufacturing Engineer II - Weld and TankWashingtonand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. As part of a highly collaborative team of engineers, technicians, and specialists, you will partner closely with design engineering, quality, and production teams to support the development and execution of manufacturing processes for tanks and composite overwrapped pressure vessel (COPV) hardware.
2nd Shift Manufacturing Team Member Clarkwestern Dietrich Building Systems LLC2nd Shift Manufacturing Team MemberBaltimore, MDClarkDietrich, a leading manufacturer of cold-formed steel framing and interior and exterior finishing products in North America, fosters a work-life balance and offers competitive compensation and benefits. Performs routine maintenance and notifies maintenance personnel concerning any machine issues that might slow down production, cause a safety concern or lead to further maintenance problems.
FLAVOR MANUFACTURING TECH I - C Shift McCormick & Co IncFLAVOR MANUFACTURING TECH I - C ShiftHunt Valley, MD$21.07–$31.61 / hourWith over $6 billion in annual sales across 160 countries and territories, we manufacture, market, and distribute spices, seasoning mixes, condiments, and other flavorful products to the entire food industry including e-commerce, retail,food manufacturers and foodservice businesses. Our most popular brands include McCormick, Frenchs, Franks RedHot, Stubbs, OLD BAY, Lawrys, Zatarains, Ducros, Vahiné, Cholula, Schwartz, Kamis, DaQiao, Club House, Aeroplane, and Gourmet Garden.
Sr. Engineer Advanced Manufacturing Baltimore Aircoil CoSr. Engineer Advanced ManufacturingMD$124,500–$213,300 / yearAs part of the Americas Advanced Manufacturing Engineering department this position will have significant interaction with the Global and Americas Engineering Design and Manufacturing teams, the plant engineering teams, and the manufacturing plants. This includes all relevant operations aspects such as supply chain coordination, data flow processes, labor planning, training, and demand vs capacity and ramp up planning.
Manufacturing Engineer Intern IDEX CorpManufacturing Engineer InternMDWith interesting opportunities in engineering, marketing, sales, supply chain, operations, HR, finance, and more across more than 40 diverse businesses ( https://www.idexcorp.com/our-businesses/business-segments/ ) around the globe, chances are, we have something special for you. US Valve is seeking a motivated, hands-on Engineering Intern to support tooling design, production efficiency, and continuous improvement initiatives within our valve assembly operations.
Manufacturing Engineer I/II Rocket Lab CorporationManufacturing Engineer I/IIMiddle River, MD$77,000–$119,000 / yearTo conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope.
NewSenior Manufacturing Engineer- Composites Rocket Lab CorporationSenior Manufacturing Engineer- CompositesMiddle River, MD$115,000–$144,000 / yearTo conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope.
Global Agile Leader- Manufacturing Baltimore Aircoil Company, Inc.Global Agile Leader- ManufacturingJessup, MDFull timeThe scrum mentor’s responsibilities include ensuring that development teams follow scrum framework values and agile practices, mentoring and motivating the teams to improve processes, facilitating meetings and decision-making processes, and eliminating team impediments. Ultimately, this position will play a key role in the long-term strategy to become a more agile organization, help our teams accelerate and meet our customers’ needs.
Commercial Construction Assistant Project Manager - Advanced Manufacturing HITT Contracting IncCommercial Construction Assistant Project Manager - Advanced ManufacturingWashington DC, DC$77,000–$110,000 / yearGather data, interpret it into meaningful information, and relay that information through clear, concise communication strategies; ability to see how pieces and processes fit into and affect the bigger picture/business model. Job Description: An Assistant Project Manager (APM) obtains, evaluates, coordinates and distributes the information and authorizations necessary to construct projects on time, within budget and to the quality specified.
Maintenance Supervisor – Manufacturing – Union Aminov Search PartnersMaintenance Supervisor – Manufacturing – UnionBaltimore, MD$115,000 / yearDrive continuous improvement efforts in partnership with technical personnel, targeting process enhancements, operational efficiency, and cost reduction. - Architect comprehensive maintenance strategies, emphasizing timely schedule adherence and equipment reliability to reduce downtime and boost efficiency.
Manufacturing Project Manager Lockheed Martin CorpManufacturing Project ManagerSevern, MD$104,500–$184,115 / yearPay Rate: The annual base salary range for this position in California, Massachusetts, and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $104,500 - $184,115. Lockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer.
Manufacturing Engineering Manager Sedron TechnologiesManufacturing Engineering ManagerWashingtonStrong knowledge of AWS welding codes and their application in a production environment; experience with WPSs, PQRs, and welder certifications; proficiency with root cause analysis, corrective action methodologies, and lean manufacturing principles. The Manager drives continuous improvement across fabrication and assembly processes, reducing defects, scrap, and cycle time while ensuring all processes consistently meet customer, safety, and regulatory requirements.
Operator Manufacturing I Coca-Cola Consolidated IncOperator Manufacturing IBaltimore, MDJob Overview The Operator Manufacturing I is responsible for performing various tasks to operate and monitor assigned production equipment following established procedures and guidelines, while adjusting machine settings to complete tasks accurately, according to specifications, and in a timely fashion. Competitive Benefits: Health coverage + paid time off Purpose-Driven: Create meaningful impact in the communities you serve Training & Support: Ongoing learning opportunities Join us - your refreshing new chapter starts here!
Maintenance Technician (Manufacturing Industry Experience) LatitudeMaintenance Technician (Manufacturing Industry Experience)Baltimore, MarylandThe ideal candidate will have hands-on experience in a fast-paced manufacturing environment and a strong understanding of mechanical, electrical, pneumatic, and hydraulic systems to ensure maximum equipment uptime and safe operations. We are seeking a skilled Maintenance Technician with a strong background in the manufacturing industry to support the maintenance, troubleshooting, and repair of production equipment and facility systems.
U105 Manufacturing Operations Maintenance Technician - 4th Shift Northrop Grumman CorpU105 Manufacturing Operations Maintenance Technician - 4th ShiftBaltimore, MDMust possess an Associate's Degree (minimum 60 semester hours) or two years (minimum 60 semester hours) of college level study with a major in Electronics or a minimum of six months military electronics school, plus two years working experience in the maintenance and repair of electro-mechanical equipment. Maintain in working order fabrication, assembly and test equipment used in the production and test of ceramic and organic multilayer interconnections, surface mount assemblies, microelectronic assemblies, electronic combat assemblies, antenna assemblies, and other system assemblies/subassemblies.
Manufacturing Production Scheduler Lockheed Martin CorpManufacturing Production SchedulerSevern, MD$69,900–$123,280 / yearPay Rate: The annual base salary range for this position in California, Massachusetts, and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $69,900 - $123,280. Description:As a Manufacturing Production Scheduler Sr within IGNITE, you will work in the Severn Operations Manufacturing Team and will be responsible for creating, maintaining, and optimizing production schedules in partnership with Manufacturing Project Managers.
Manufacturing Program Manager - Sea Textron IncManufacturing Program Manager - SeaHunt Valley, MD$110,500–$167,900 / yearResponsibilities to Include: Represent Operations on the Program IPT's supporting assigned programs Represent program needs on the Operations Leadership team o Coordinate between operations functional leaders to ensure successful execution o Flow critical information both ways between operations and programs o Communicate program schedule and cost priorities Lead cross functional, multi-site teams through the various execution activities including facilities and resource planning, manufacturing readiness, supply chain health, quality requirements, and process development. Establish overall manufacturing schedule and coordinate details with operations Master Scheduler to ensure on time completion Coordinate program and design schedules with the manufacturing and supply chain Establish and track execution metrics across operations and supply chain and report metrics to ELT as needed Coordinate key purchases/sub-contracts with external supply chain to include flow down of all contract and quality requirements Execute Operations CAM EVMS planning and execution for execution tasks including Operations labor, both support and touch, and material.
Director, Manufacturing Ops Air, Land, Sea Textron IncDirector, Manufacturing Ops Air, Land, SeaHunt Valley, MD$173,900–$268,500 / yearStrategy Develop and execute roadmap to achieve long-term operational success Establish and execute capital planning for the manufacturing functions Develop and execute the manufacturing strategies in support of New Product Development (NPD) that satisfy near term demands of development programs and support long term vision of transitioning to a full rate production Process Communicate problem resolution to customers and senior management Analyze data, identify areas of opportunity, and implement improvements or corrective actions to address inefficiencies or quality issues Develop manufacturing and quality plans in support of Proposals and Awarded Programs Budgeting Develop manufacturing Cost Bids for proposals as well as initial baseline budgets and estimates to completes for awarded programs Manage direct and indirect budgets Tools Maintain and improve the Enterprise Quality Dashboard Maintain and improve the Warehouse Dashboard Maintain and improve the Planning Dashboard Maintain and improve the resource Load/Capacity System Qualifications Required Skills Bachelor's Degree in a discipline related to Supply Chain Management, Operations, Engineering, Science, or Mathematics. Six Sigma Green Belt, Black Belt certification preferred Strong organizational and time management skills, close attention to detail, and be able to effectively handle multiple priorities Strong computer skills, proficient with word processing, spreadsheet and presentation software, e-mail and meeting management software Strong analytical skills and the ability to identify trends and establish proactive corrective actions.
Manufacturing Product Owner Baltimore Aircoil Company, Inc.Manufacturing Product OwnerJessup, MDFull timeThe Product Owner will execute the product roadmaps collaborating with engineering, manufacturing, and marketing to deliver new capital equipment products through the New Product Introduction (NPI) process to ensure our products meet customer requirements and offer BAC a competitive advantage. The Product Owners job includes working within a matrixed organization to launch new products, meet business metrics, and achieve customer satisfaction.
Senior Manager, Oracle SCM (Order Management, Manufacturing, Costing) PricewaterhouseCoopers LLPSenior Manager, Oracle SCM (Order Management, Manufacturing, Costing)DC$124,000–$280,000 / yearExamples of the skills, knowledge, and experiences you need to lead and deliver value at this level include but are not limited to: Craft and convey clear, impactful and engaging messages that tell a holistic story. PwC does not intend to hire experienced or entry level job seekers who will need, now or in the future, PwC sponsorship through the H-1B lottery, except as set forth within the following policy: https://pwc.to/H-1B-Lottery-Policy .
NewManufacturing Engineer II - Standards & Process Blue OriginManufacturing Engineer II - Standards & ProcessWashingtonand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
NewManufacturing Engineer III - Standards & Process Blue OriginManufacturing Engineer III - Standards & ProcessWashingtonand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
NewManufacturing Engineer Sr - Standards & Process Blue OriginManufacturing Engineer Sr - Standards & ProcessWashingtonand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Manufacturing Engineer Danaher CorpManufacturing EngineerMD$95,000–$120,000 / yearFrom airplane engines to hydraulic systems, scotch to smartphones, OLED screens to paper-everyday Pall is there, helping protect critical operating assets, improve product quality, minimize emissions and waste, and safeguard health. The Manufacturing Engineer's responsibilities include the support of manufacturing operations in the production of filtration products by improving Safety, Ergonomics, On Time Delivery (OTD), Productivity and increasing yields of manufacturing activities.
NewManufacturing Associate BlueScopeManufacturing AssociateWashingtonWhile performing the duties of this position, the employee is occasionally exposed to floor hazards, machine hazards, and hazards associated with driving a forklift. We sit alongside our colleagues at ASC Profiles as part of NS BlueScope Coated Products North America, a joint venture between BlueScope and Nippon Steel.