Technician, Manufacturing Engineering - New Hire Sign on Bonus 12-hour shift 3 day-4-day Work Weeks JABIL CIRCUIT, INCTechnician, Manufacturing Engineering - New Hire Sign on Bonus 12-hour shift 3 day-4-day Work WeeksSt. Petersburg, FLIn this key Manufacturing Engineer Technician onsite role, you will perform preventative maintenance, calibration, change overs in Z-prep area and perform preventive maintenance for tooling (SMT & BE process) and other specialty support equipment used in the manufacturing process. If you’re someone who prefers working nights or wants to maximize earning potential while enjoying a schedule with fewer total days giving you additional full days off during the week to spend with family, pursue hobbies, or rest, this could be a great fit for you.
Technician (SMT Install Maintain Repair) Butler America AerospaceTechnician (SMT Install Maintain Repair)Oldsmar, FL$23–$35 / hourFull timeHigh School diploma, or equivalent experience/combined education, with additional specialized technical training equivalent to a technical Associate degree and/or demonstrated ability to perform assigned technical/para-engineering tasks and 10 Year of experience. This position also performs evaluation, preventative and corrective maintenance, including immediate repairs on a variety of equipment utilized in the CCA - Circuit Board Assembly production process.
Electronics Technician PlanIT GroupElectronics TechnicianOldsmar, FL$22–$35 / hourShift hours are Mon-Thurs 5 AM-3:30 PM EST***** Rate Card Class: Electronics Technician - Electronics Technician Region: Oldsmar, FL Level: Level 2: BS+4-8 YRS or MS+2-6 YRS Pay Rate: $22.00 - $35.00 Hourly OT40 Skills: Category Name Required Importance Experience Area of Expertise MIL-STD-167-1A (Vibration) No 3 Areas of Expertise Electrical Troubleshooting Yes 9 Areas of Expertise Thermal No 3 Soft Skills Troubleshooting Yes 9 Technical Skills Basic Computer Skills Yes 9 Technical Skills Electronics circuit card troubleshooting and testing Yes 9 Technical Skills Electronics troubleshooting Yes 9 Work Schedule: 4/10-2nd Shift Security Clearance: None Security Clearance Comments: Time Charging System: Auto Time Opportunity for FTE Hire: Yes OT Status: non-Exempt Worksite Classification: Worker will work Onsite Full Time Typical Minimums: High School diploma, or equivalent experience/combined education, with additional specialized technical training equivalent to a technical Associate degree and/or demonstrated ability to perform assigned technical/para-engineering tasks and 1 Year of experience.
NewTechnician PlanIT GroupTechnicianOldsmar, FLTypical Minimums: High School diploma, or equivalent experience/combined education, with additional specialized technical training equivalent to a technical Associate degree and/or demonstrated ability to perform assigned technical/para-engineering tasks and 10 Year of experience. This position also performs evaluation, preventative and corrective maintenance, including immediate repairs on a variety of equipment utilized in the CCA production process.
Hand Soldering Technician Butler America AerospaceHand Soldering TechnicianOldsmar, FL$18–$24 / hourContractorSoldering Operations: - Perform hand soldering, de-soldering, and rework on printed circuit boards (PCBs), wire harnesses, and mechanical assemblies using soldering irons, hot-air tools, and precision hand tools. The role involves precision hand soldering and component level repair on electronic and electromechanical assemblies, ensuring adherence to stringent quality, safety, and documentation requirements.
Maintenance Technician, Nightshift RefrescoMaintenance Technician, NightshiftLakeland, FL$32–$36Adhere to all health and safety policies/procedures, Good Manufacturing Practices (GMPs) and wear the required personal protective equipment (PPE) while in the warehouse or production areas (including but not limited to hairnets/beard nets, safety glasses, hearing protection, hard toe and slip/oil resistant shoes, appropriate safety gloves, and seatbelts while operating forklifts). Employment agencies that have agreements with Refresco Beverages US, Inc., and have been engaged in a search shall submit a résumé to the designated Refresco recruiter or, upon authorization, submit a résumé to this career site to be eligible for placement fees.
Maintenance Technician, 3rd Shift RefrescoMaintenance Technician, 3rd ShiftTampa, FLAdhere to all health and safety policies/procedures, Good Manufacturing Practices (GMPs) and wear the required personal protective equipment (PPE) while in the warehouse or production areas (including but not limited to hairnets/beard nets, safety glasses, hearing protection, hard toe and slip/oil resistant shoes, appropriate safety gloves, and seatbelts while operating forklifts). Use innovative thinking when troubleshooting equipment in order to minimize production downtime, assure food safety, product quality and personnel safety.
NewSecurity Service Technician Johnson ControlsSecurity Service TechnicianTampa, FL$22–$29 / hourJohnson Controls, a global leader in thermal management, mission-critical building systems, energy efficiency, and decarbonization, helps customers use energy more productively, reduce carbon emissions, and operate with the precision and resilience required in rapidly expanding industries such as data centers, healthcare, pharmaceuticals, advanced manufacturing, and higher education. Service Technicians diagnose problems and perform service and repairs on card access, CCTV, burglar alarm systems, electronic fire alarm systems and other related building system products at customer sites.
Thermal Spray Coating Technician apsTempsThermal Spray Coating TechnicianOldsmar, FL$16–$18 / hourAutomation Personnel Services is a highly recognized staffing agency with over 30 years of experience in manufacturing and light-industrial staffing. • Perform quality inspections using non-destructive testing (NDT) techniques such as ultrasonic testing, eddy current, and metallographic analysis.
Thermal Spray Machine Technician apsTempsThermal Spray Machine TechnicianOldsmar, FL$16–$18 / hourAutomation Personnel Services is a highly recognized staffing agency with over 30 years of experience in manufacturing and light-industrial staffing. • Perform quality inspections using non-destructive testing (NDT) techniques such as ultrasonic testing, eddy current, and metallographic analysis.
NewProduction Supervisor (12 HR Night Shift) JABIL CIRCUIT, INCProduction Supervisor (12 HR Night Shift)ST. PETERSBURG, FLThis role oversees maintenance activities, equipment performance, technical resource planning, and continuous improvement initiatives while ensuring quality, safety, and customer requirements are consistently achieved. Functional Responsibilities Oversee the equipment maintenance program, including preventive maintenance, corrective maintenance, feeder maintenance, spare parts management, and support equipment maintenance.
Manufacturing Technician I Fluent CannabisManufacturing Technician ITampa, FLReasonable accommodations may be made to enable individuals with disabilities to perform the essential functions, including but not limited to: Participating individually and in small teams for general manufacturing duties, such as dispensing, packaging, equipment breakdowns, moving products, inventory audits, labeling, sanitation, post-harvest processing, and other general duties around manufacturing as they relate to production. Key Responsibilities: Participating individually and in small teams for general manufacturing duties, such as dispensing, packaging, equipment breakdowns, moving products, inventory audits, labeling, sanitation, post-harvest processing, and other general duties around manufacturing as they relate to production.
Manufacturing Technician Casting C Shift Wed 12pm to 6pm Thu- Sat 6am-6pm (P) Siemens Energy AGManufacturing Technician Casting C Shift Wed 12pm to 6pm Thu- Sat 6am-6pm (P)FLWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. Will be operating alloy saw according to production specifications to produce the correct charge weights and to organize incoming alloy and current inventory by type.
Manufacturing Technician Bench 2nd Shift 2pm to 10:00pm (P) Siemens Energy AGManufacturing Technician Bench 2nd Shift 2pm to 10:00pm (P)FLWill perform operations on castings for surface preparation such as blasting, belting, grinding, and benching according to production specifications to produce parts of exceptional quality in the Gibsonton Florida Location. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably.
Manufacturing Technician Bench 3rd Shift M-F 10pm to 6am (P) Siemens Energy AGManufacturing Technician Bench 3rd Shift M-F 10pm to 6am (P)FLWill perform operations on castings for surface preparation such as blasting, belting, grinding, and benching according to production specifications to produce parts of exceptional quality in the Gibsonton Florida Location. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably.
Manufacturing Technician Bench 2nd Shift M-F 2:00pm- 10pm (P) Siemens Energy AGManufacturing Technician Bench 2nd Shift M-F 2:00pm- 10pm (P)FLWill perform operations on castings for surface preparation such as blasting, belting, grinding, and benching according to production specifications to produce parts of exceptional quality in the Gibsonton Florida Location. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably.
Manufacturing Technician Casting - D Shift Wed 12am-6am, Thu-Sat 6pm-6am (P) Siemens Energy AGManufacturing Technician Casting - D Shift Wed 12am-6am, Thu-Sat 6pm-6am (P)FLWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. Will be operating alloy saw according to production specifications to produce the correct charge weights and to organize incoming alloy and current inventory by type.
Manufacturing Technician I Winnebago Industries IncManufacturing Technician IClearwater, FLAssemblers must be able to understand technical manuals, blueprints, and schematics for a wide range of products and machines to properly manufacture the final product. In the role of Manufacturing Technician you will: Assemble equipment according to procedures & drawing specifications by reading drawings and following instruction.
Manufacturing Technician Core Finishing 1st Shift 6am to 2pm (P) Siemens Energy AGManufacturing Technician Core Finishing 1st Shift 6am to 2pm (P)FLWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. Using diamond bit tools, sandpapers to sand down die lines on the main body of the core and pneumatic air tools to remove tie bars on core.
NewManufacturing Technician - Wax Cleaning 2nd Shift 2pm-10pm (P) Siemens Energy AGManufacturing Technician - Wax Cleaning 2nd Shift 2pm-10pm (P)FLWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. This position will require an export license from the Department of Commerce, Bureau of Industry and Security and/or the Department of State, Directorate of Defense Trade Controls.
Manufacturing Technician FPI Rework 2nd Shift 2:00pm to 10:00pm (P) Siemens Energy AGManufacturing Technician FPI Rework 2nd Shift 2:00pm to 10:00pm (P)FLWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. Experience with Inspection Equipment (calipers, pin gauges, etc.) using the metric system and able to perform math functions, read/comprehend Engineering instructions, and mechanical attitude.
Manufacturing Technician X-Ray Reader 3rd Shift M-F 10pm to 6am (P) Siemens Energy AGManufacturing Technician X-Ray Reader 3rd Shift M-F 10pm to 6am (P)FLWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. X-Ray readers retrieve component requirements from work order and special instruction in notes as to the image requirements per component type.
Manufacturing Technician Core Finishing 2nd Shift 2pm to 10:00pm (P) Siemens Energy AGManufacturing Technician Core Finishing 2nd Shift 2pm to 10:00pm (P)FLWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. Using diamond bit tools, sandpapers to sand down die lines on the main body of the core and pneumatic air tools to remove tie bars on core.
Manufacturing Technician Kiln A Shift Sun-Tue 6am to 6:00pm Wed 6am to 12pm (P) Siemens Energy AGManufacturing Technician Kiln A Shift Sun-Tue 6am to 6:00pm Wed 6am to 12pm (P)FLOrganization Gas Services Business Unit Central Full / Part time Full-time Experience Level Early Professional A Snapshot of Your Day Will be loading and unloading furnaces with crucibles containing cores. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably.
Manufacturing Technician Core X-Ray 2nd Shift 2pm to 10pm (P) Siemens Energy AGManufacturing Technician Core X-Ray 2nd Shift 2pm to 10pm (P)FLWill work in the Core Department with X-Ray Equipment using process knowledge, basic engineering principles, previous experience, and creativity, to help develop and improve manufacturing processes that result in the production of quality castings. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably.
NewManufacturing Technician Shell Dipper D Shift Wed- 12am to 6am Thu to Sat 6pm to 6am (P) Siemens Energy AGManufacturing Technician Shell Dipper D Shift Wed- 12am to 6am Thu to Sat 6pm to 6am (P)FLWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. This position will require an export license from the Department of Commerce, Bureau of Industry and Security, and/or the Department of State, Directorate of Defense Trade Controls.
Manufacturing Technician Casting - A Shift Sun-Tue 6am to 6:00pm Wed 6am to 12pm (P) Siemens Energy AGManufacturing Technician Casting - A Shift Sun-Tue 6am to 6:00pm Wed 6am to 12pm (P)FLWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. Will be operating alloy saw according to production specifications to produce the correct charge weights and to organize incoming alloy and current inventory by type.
NewManufacturing Technician Dewax 2nd Shift 2:00pm to 10pm (P) Siemens Energy AGManufacturing Technician Dewax 2nd Shift 2:00pm to 10pm (P)FLWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. Will be removing molds from automated Shell system and prep for boiler and burnout operations in according to production specifications to produce parts of exceptional quality in the Gibsonton Florida Location.
Manufacturing Technician Casting - B Shift Sun-Tue 6pm to 6am Wed 6pm to 12pm (P) Siemens Energy AGManufacturing Technician Casting - B Shift Sun-Tue 6pm to 6am Wed 6pm to 12pm (P)FLWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. Will be operating alloy saw according to production specifications to produce the correct charge weights and to organize incoming alloy and current inventory by type.
Manufacturing Technician Bench 1st Shift 6am to 2:00pm (P) Siemens Energy AGManufacturing Technician Bench 1st Shift 6am to 2:00pm (P)FLA Snapshot of Your Day Will perform operations on castings for surface preparation such as blasting, belting, grinding, and benching according to production specifications to produce parts of exceptional quality in the Gibsonton Florida Location. How You'll Make an Impact Setting up and operating benching procedures on castings using basic tools like die grinders, tool belts, buffing wheels, blast cabinets, and auxiliary equipment.
Manufacturing Technician Wax Ultrasonic 2nd Shift 2pm to 10pm (P) Siemens Energy AGManufacturing Technician Wax Ultrasonic 2nd Shift 2pm to 10pm (P)FLWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. This position will require an export license from the Department of Commerce, Bureau of Industry and Security and/or the Department of State, Directorate of Defense Trade Controls.
Manufacturing Technician Core Blue Light 3rd Shift 10pm to 6am (P) Siemens Energy AGManufacturing Technician Core Blue Light 3rd Shift 10pm to 6am (P)Gibsonton, FLWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. This position will require an export license from the Department of Commerce, Bureau of Industry and Security and/or the Department of State, Directorate of Defense Trade Controls.
Manufacturing Technician Shell Dipper Sun-Tue 6am to 6pm Wed 6am to 12pm Siemens Energy AGManufacturing Technician Shell Dipper Sun-Tue 6am to 6pm Wed 6am to 12pmFLWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. This position will require an export license from the Department of Commerce, Bureau of Industry and Security, and/or the Department of State, Directorate of Defense Trade Controls.
2nd shift Maintenance Technician, Manufacturing ICP Group2nd shift Maintenance Technician, ManufacturingTampa, FLFull timeMechanical (pneumatic/hydraulic, power transmission, lubrication, seals, joints, fasteners), Electrical (wiring, contactors, relays), and Electronic (sensors, instrumentation, hardware) skills will be utilized to maintain a continuous stream of production through installation, commissioning, removal, troubleshooting and repair of plant equipment. In this role you will be responsible for the following: Conduct, develop and maintain records for installation, removal, and troubleshooting systems (Pumps, Piping, Valves, Pneumatics, Motor Starters, Wiring logic, etc.).
Manufacturing Technician Finishing FPI Processor 2nd Shift 2pm to 10pm (P) Siemens Energy AGManufacturing Technician Finishing FPI Processor 2nd Shift 2pm to 10pm (P)FLWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. Achieve and maintain internal certifications per SNT-TC-1A and customer requirements including examination for general method knowledge, specific procedure understanding and practical performance of the method.
Manufacturing Technician FPI Rework 3rd Shift 10pm to 6am (P) Siemens Energy AGManufacturing Technician FPI Rework 3rd Shift 10pm to 6am (P)FLWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. Experience with Inspection Equipment (calipers, pin gauges, etc.) using the metric system and able to perform math functions, read/comprehend Engineering instructions, and mechanical attitude.
Manufacturing Technician Mold Prep 3rd Shift 10pm to 6am (P) Siemens Energy AGManufacturing Technician Mold Prep 3rd Shift 10pm to 6am (P)FLWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. This position will require an export license from the Department of Commerce, Bureau of Industry and Security and/or the Department of State, Directorate of Defense Trade Controls.
Manufacturing Equipment Technician PGS WorldwideManufacturing Equipment TechnicianOldsmar, FL$26–$35 / hourThis 1st shift role requires strong SMT equipment experience, AOI experience, electronics troubleshooting ability, mechanical aptitude, and at least 10 years of related technical experience. The Manufacturing Equipment Technician will install, maintain, troubleshoot, repair, and improve manufacturing equipment used in circuit card assembly production.
Manufacturing Technician Rough Knock - Out Operator 2nd Shift 2pm to 10:00pm (P) Siemens Energy AGManufacturing Technician Rough Knock - Out Operator 2nd Shift 2pm to 10:00pm (P)FLPerforming basic or specifically defined maintenance operations; cooperating with maintenance technicians and/or external service providers in repair issues and using hand tools, including wrenches, allen wrenches, and screw drivers. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably.
Electronic Technician / Test Technician - Manufacturing SolarEdgeElectronic Technician / Test Technician - ManufacturingSeminole, FLSolarEdge proudly seeks to build a richly diverse workforce by hiring people with a diversity of thoughts, identities, perspectives, and experiences that help advance the difference we make for consumers, and by ensuring our people experience equity and inclusion in their work lives. The Electronic Technician / Test Technician (ATE) is responsible for performing hands-on testing, troubleshooting, and maintenance of electronic systems and automated test equipment (ATE) used in a manufacturing environment.
Manufacturing Technician Finish Visual Inspector 3rd Shift 10pm to 6am (P) Siemens Energy AGManufacturing Technician Finish Visual Inspector 3rd Shift 10pm to 6am (P)Gibsonton, FLYour work will also impact society by helping to reduce the cost of fabrication and machining of gas turbine combustion components using our innovative manufacturing processes in the Gibsonton Florida location. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably.
Quality Technician - Manufacturing & Product Testing Team Horner GroupQuality Technician - Manufacturing & Product TestingSt. Petersburg, FLThe Quality Technician plays a key role in quality assurance activities, including failure analysis, RMA processing, supplier corrective actions, quality reporting, calibration coordination, and repair of rejected or returned units. This position works closely with production, engineering, suppliers, and quality teams to implement corrective and preventive actions and drive continuous improvement of quality processes and procedures.
Additive Manufacturing Technician Cummings Aerospace IncAdditive Manufacturing TechnicianLargo, FLThe Additive Manufacturing Technician is responsible operating, maintaining, and optimizing additive manufacturing (AM) systems to produce precision components, prototypes, and final products. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.
Senior SMT Manufacturing Equipment Maintenance Technician Nesco Resource, LLCSenior SMT Manufacturing Equipment Maintenance TechnicianOldsmar, FL$26–$35 / hourHigh School diploma, or equivalent experience/combined education, with additional specialized technical training equivalent to a technical Associate degree and/or demonstrated ability to perform assigned technical/para-engineering tasks and 10 Year of experience. This position also performs evaluation, preventative and corrective maintenance, including immediate repairs on a variety of equipment utilized in the CCA production process.
Manufacturing Engineer I Honeywell International IncManufacturing Engineer IPalmetto, FLAs a trusted partner, we provide actionable solutions and innovation through our Aerospace Technologies, Building Automation, Energy and Sustainability Solutions, and Industrial Automation business segments - powered by our Honeywell Forge software - that help make the world smarter, safer and more sustainable. We are a leading software-industrial company committed to introducing state of the art technology solutions to improve efficiency, productivity, sustainability, and safety in high growth businesses in broad-based, attractive industrial end markets.
NewManufacturing Technician Rough Special Process D Shift Wed 12am-6am, Thu-Sat 6pm-6am (P) Siemens Energy AGManufacturing Technician Rough Special Process D Shift Wed 12am-6am, Thu-Sat 6pm-6am (P)FLChecks routers to ensure the proper part number and master heat number is on paperwork and all previous operations are signed off will do spot checks on cut-off parts to ensure the accuracy of work inspecting for cracks, heat checks, or other damage. Your work will also impact society by helping to reduce the cost of fabrication and machining of gas turbine combustion components using our innovative manufacturing processes in the Gibsonton Florida Location.
Manufacturing Technician Rough Heat Treat 3rd Shift M-F 10pm to 6pm (P) Siemens Energy AGManufacturing Technician Rough Heat Treat 3rd Shift M-F 10pm to 6pm (P)FLWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. Operating equipment and performing some manufacturing operations including but not limited to wax assembly, injection, sandblast, grinding, or knockout to determine the best process and to expedite engineering parts.
Manufacturing Technician Rough Incoming 1st Shift 6:00am to 2:00pm (P) Siemens Energy AGManufacturing Technician Rough Incoming 1st Shift 6:00am to 2:00pm (P)FLChecks routers to ensure the proper part number and master heat number is on paperwork and all previous operations are signed off will do spot checks on cut-off parts to ensure the accuracy of work inspecting for cracks, heat checks, or other damage. Your work will also impact society by helping to reduce the cost of fabrication and machining of gas turbine combustion components using our innovative manufacturing processes in the Gibsonton Florida Location.
Manufacturing Technician Rough Special Process B Shift Sun-Tue 6pm-6am Wed 6pm to 12am (P) Siemens Energy AGManufacturing Technician Rough Special Process B Shift Sun-Tue 6pm-6am Wed 6pm to 12am (P)FLChecks routers to ensure the proper part number and master heat number is on paperwork and all previous operations are signed off will do spot checks on cut-off parts to ensure the accuracy of work inspecting for cracks, heat checks, or other damage. Your work will also impact society by helping to reduce the cost of fabrication and machining of gas turbine combustion components using our innovative manufacturing processes in the Gibsonton Florida Location.
Manufacturing Technician Rough Special Process 1st Shift 6am to 2pm (P) Siemens Energy AGManufacturing Technician Rough Special Process 1st Shift 6am to 2pm (P)FLChecks routers to ensure the proper part number and master heat number is on paperwork and all previous operations are signed off will do spot checks on cut-off parts to ensure the accuracy of work inspecting for cracks, heat checks, or other damage. Your work will also impact society by helping to reduce the cost of fabrication and machining of gas turbine combustion components using our innovative manufacturing processes in the Gibsonton Florida Location.