Structural Engineer Hillis-CarnesStructural EngineerAnnapolis Junction, MDFull timeHillis-Carnes Engineering Associates (HCEA) is an ENR Top 500, regional, multi-disciplined engineering firm with advanced capabilities in geotechnical and geostructural engineering, environmental consulting, specialty construction, construction materials engineering and testing, and third-party inspections. Project Management: Must be experienced in project management, with the ability to control schedules, budgets, resources, and provide the highest level of client services.
Principal Geotechnical/CMT Engineer Hillis-CarnesPrincipal Geotechnical/CMT EngineerAnnapolis Junction, MDFull timeDuties may include but are not limited to; general geotechnical engineering practice including the preparation of geotechnical reports/calculation, technical support of field staff, review of construction inspection daily field reports, and occasional project site field visits related to the projects you are involved in. Candidate will work with our geotechnical and materials testing/inspections departments and be responsible for a wide variety of projects for public and private sector clients.
Project Engineer - Instrumenation Sixense Inc.Project Engineer - InstrumenationSilver Spring, MDFull timeThe job specific Project Engineer will be responsible for supporting the successful execution of Instrumentation & Geotechnical monitoring projects by combining field operations, project coordination, and client support in the Pittsburgh, PA area. Project Engineer is responsible for supporting the successful execution of Instrumentation & Geotechnical monitoring projects by combining field operations, project coordination, and client support.
Quantum Engineer SME DCS CorporationQuantum Engineer SMESpringfield, VAPerform trade studies and conduct analyses to evaluate proposed quantum machine learning approaches, review technical reports, assess product-quality impacts, and characterize performance using quantum simulation or related technologies to support verification and quality assurance. The DCS Air and Space Technology Sector are seeking a qualified candidate to apply subject matter expertise in the areas of quantum engineering, analysis, and system design of complex programming projects supporting National Agencies.
NewCommercial Construction Project Engineer HITT ContractingCommercial Construction Project EngineerFalls Church, VA$77,000–$82,000 / yearMaster required job-specific and technical skills in order to promote to an assistant superintendent or assistant project manager following the 12-month training program including, but not limited to, the ability to: Set up and maintain jobsite office and all jobsite records, including project directory, construction documents, subcontractor directory, daily reports, submittal logs, RFI logs, subcontractor correspondence, etc. Ability to learn sector- and project-specific software systems, including but not limited to: Microsoft Office 365 (Project, Excel, Word, Outlook, PowerPoint, etc.), ProCore, Adobe Suite, BlueBeam, and JD Edwards software suite.
NewCommercial Construction Site Engineer HITT ContractingCommercial Construction Site EngineerFalls Church, VA$22–$25 / hourOur Site Engineers receive exceptional mentorship, hands-on learning experiences, professional development courses, and personal growth opportunities tailored to you to fast-track your journey to promotion and career success as a member of our Site Operations team. Site Engineers have the flexibility to work on-site full-time or pursue an associate’s degree while working part-time, making this the ideal position for any high school graduate or early-career professional looking for a team and schedule that works with you.
Integration Engineer LeidosIntegration EngineerLorton, VA$73,450–$132,775Supporting the HEITS management team, the selected individual will be responsible for providing services for the design of new sites, IT renovations, cabling, server room space, desktop PC deployments, printers, faxes, phone(s); copiers; data storage, shared drives, and general-purpose applications on HSDN and C-LAN. The Department of Homeland Security (DHS) has a continuing requirement for Homeland Enterprise IT Secure Services and Support (HEITS) for the continued operations and maintenance and evolution of the Homeland Secure Data Network (HSDN) and the Classified Local Area Network (C-LAN).
Engineer Constellation EnergyEngineerHuntingtown, MD$87,000–$154,000Perform other job assignments and duties as directed by management or pursuant to company policy, including but not limited to emergency response, departmental coverage, call outs, and support of outage activities in positions outside the department. Now integrated with Calpine, our portfolio includes 55 gigawatts of capacity from nuclear, natural gas, geothermal, hydro, wind and solar facilities, with the generating capacity to power the equivalent of 27 million homes.
NewProject Engineer - Structural Shoring & Civil Design Sunbelt RentalsProject Engineer - Structural Shoring & Civil DesignElkridge, MD$81,951–$112,682.90 / yearThis role bridges the gap between civil structural engineering analysis and geotechnical soil properties, producing critical project calculations and AutoCAD drawings under the direction of a Professional Engineer (PE). Certifications: Engineer-in-Training (EIT) certification or a licensed Professional Engineer (PE) is highly desirable (or the clear ability/desire to obtain your PE in the near future).
NewConstruction Project Engineer - Industrial Projects System OneConstruction Project Engineer - Industrial ProjectsArlington, VA$75,000–$110,000 / yearAs a Construction Project Engineer , you will work onsite with the Project Team to plan, develop, coordinate, and manage onsite construction engineering activities for Industrial projects – primarily Water/Wastewater Treatment plant construction but also factories/production facilities, data centers , focused mostly in Northern Virginia, District of Columbia (DC), and Baltimore area. Develop, implement, and administer project engineering procedures and other work controlling documents (submittals, RFI’s, expediting material deliveries, payment of Subcontractors/Vendors, and Owner pay requests).
Electrical Engineer Constellation EnergyElectrical EngineerBenedict, MD$122,400–$154,000Perform other job assignments and duties as directed by management or pursuant to company policy, including but not limited to emergency response, departmental coverage, call outs, and support of outage activities in positions outside the department. Now integrated with Calpine, our portfolio includes 55 gigawatts of capacity from nuclear, natural gas, geothermal, hydro, wind and solar facilities, with the generating capacity to power the equivalent of 27 million homes.
NewMMS Technology Engineer System OneMMS Technology EngineerBethesda, MDRemote$25 / hourResponsible for supporting multiple customers with their MDM environment, including, but not limited to, managing the administration console, application management, server maintenance and installation, and technical documentation write-ups. System One IT is staffing a 4-5 month remote contract opening for a Mobile Device Management (MDM) / Workspace ONE Engineer role to support enterprise mobility environments.
Clinical Engineer Technician II MedStar HealthClinical Engineer Technician IIWashington, DC$28.76–$48.96Under the general direction of the Clinical Engineering leadership team the Clinical Engineering Technician II is primarily responsible for maintaining clinical equipment and systems considered to be advanced specialty highly sophisticated integrated technology or requiring manufacturer service training or certification through the effective use of the medical equipment management plan while adhering to all medical equipment policies and procedures and manufacturer or alternative equipment maintenance (AEM) specifications. related military work/training in mechanical or electrical engineering or academic work or actual work experience aligned with AAMI's Core Competencies for the Biomedical Equipment Technician.
M365 Engineer LeidosM365 EngineerBethesda, MD$107,900–$195,050Engineer, administer, and provide lifecycle support for Microsoft 365 (government community cloud (GCC) services including but not limited to: Entra ID (Azure AD), Exchange Online, Intune, Teams, Power Platform, Purview. Leidos Dig Mod Health IT division is seeking a skilled and collaborative M365 Engineer to support the HHS enterprise by managing all aspects of Microsoft 365 Government Community Cloud (GCC) Software as a Service (SAAS) offering.
Model-Based Systems Engineer LeidosModel-Based Systems EngineerRockville, MD$69,550–$125,725Bachelor’s degree in engineering or related field with 2+ years of prior relevant experience or a master’s degree with at least a year experience in one of these areas: systems engineering, software engineering, test engineering or related field. March 30, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.
Senior Model Based Systems Engineer LeidosSenior Model Based Systems EngineerWoodbridge, VA$107,900–$195,050Bachelor’s degree in engineering or related field with 8+ years of prior relevant experience or a master’s degree with 6+ years of experience in one of these areas: systems engineering, software engineering, test engineering or related field. Your role will directly support our diverse portfolio of programs through a combination of requirements and design architecture analysis; MBSE Model development; mentoring junior engineers and assisting technical leadership develop briefing material.
Materials Engineer III Ion Storage SystemsMaterials Engineer IIIBeltsville, MDBuilt on a scalable, modular, three-dimensional ceramic structure, ION's batteries take a sustainable approach to next-generation energy storage and are ready to meet the demands of an increasingly electrified world across defense and aerospace, consumer electronics, electrified transportation, and renewable energy storage. This is a project leadership role for a candidate who brings deep materials or ceramic engineering expertise, drives development programs with structured experimentation and data, and is motivated by taking a process from early-stage development to scalable, reproducible manufacturing.
Senior Principal Materials Engineer Northrop Grumman CorpSenior Principal Materials EngineerAnnapolis, MD$135,800–$203,600 / yearHe/she researches and evaluates materials and their processing methods to support engineering designs, collaborates with teammates to conduct thorough technical reviews of drawings, specifications and manufacturing plans, and delivers proactive, high‑quality customer service by continually sourcing and sharing relevant information. The candidate must be able to collaborate in a team environment, lead teams, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions.
Materials Engineer (6 Month Register) U.S. Department of DefenseMaterials Engineer (6 Month Register)Fort Belvoir, VA$111,065–$144,386 / yearRelated curriculum -- Successful completion of a curriculum leading to a bachelors degree in an appropriate scientific field (e.g., engineering technology physics, chemistry, architecture, computer science, mathematics, hydrology, or geology) may be accepted in lieu of a bachelors degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show that the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university.
Materials Engineer Delphinus EngineeringMaterials EngineerWest Bethesda, MarylandThis role involves direct support to government engineers for material condition assessments, resolution of Departure from Specification (DFS) issues, and engineering review of shipyard commitments, not inspection or quality control functions. Join Delphinus Engineering and you’ll have the opportunity to begin a rewarding career working on a wide variety of important and challenging projects that make a real impact.
Hull Treatment Materials Engineer PeratonHull Treatment Materials EngineerWest Bethesda, Maryland$86,000–$138,000 / yearFull timeWhat you will need: BS Engineering required (Mechanical Engineering, Materials Engineering or Chemical Engineering with GPA of 3.0 or higher preferred) and 5+ years experience 3 years with MS/MA. As the world’s leading mission capability integrator and transformative enterprise IT provider, we deliver trusted, highly differentiated solutions and technologies to protect our nation and allies.
Hull Treatment Materials Engineer Peraton IncHull Treatment Materials EngineerMD$86,000–$138,000 / yearWhat you will need: BS Engineering required (Mechanical Engineering, Materials Engineering or Chemical Engineering with GPA of 3.0 or higher preferred) and 5+ years experience 3 years with MS/MA. As the worlds leading mission capability integrator and transformative enterprise IT provider, we deliver trusted, highly differentiated solutions and technologies to protect our nation and allies.
Principal Materials Engineer (Metallics) - Advanced Nuclear Technology X Energy LLCPrincipal Materials Engineer (Metallics) - Advanced Nuclear TechnologyRockville, MD$121,868–$203,113 / yearPerform and assist metallurgical analysis for the alloys selected for metallic systems, structures, and components of X-energy developed reactors, including pressure vessels and piping, reactor internals, heat exchangers, and other systems and components. Job Responsibilities: Develop and implement methodologies to qualify and characterize materials, especially metallic alloys, graphite, composites, and welding materials for nuclear reactor applications including in high temperature environments.
Metallurgist & Materials Science Engineer Vision Point Systems, Inc.Metallurgist & Materials Science EngineerBethesda, MDTypical duties of this position are related to those activities associated with metallurgical investigations, such as: Metallographic sample preparation, including sectioning, mounting, grinding/polishing, etching, and light-optical microscopy of grain structures, precipitates, or other features of interest. This position will be primarily supporting the Naval Surface Warfare Center, Carderock Division's advanced manufacturing branch, concentrated on additively manufactured Naval structural steels and other corrosion-resistant alloy systems.
Associate Electronic and Optical Materials Device Fabrication Engineer Johns Hopkins University Applied Physics Laboratory LLCAssociate Electronic and Optical Materials Device Fabrication EngineerLaurel, MDMaintain version-controlled GDS/layout databases with Python-based automation for parametric layout generation, fracturing, and design rule checking, and develop data-analysis pipelines linking design, fabrication, and metrology data for CD, overlay, and yield trends. The role is predominantly fabrication-focused, with a vast majority of working hours spent in a cleanroom or laboratory environment, including the cleanroom at JHU-APL in Laurel, MD and other multi-user facilities within a 20 min to 1 hr drive.
Senior Electronic and Optical Materials Device Fabrication Engineer Johns Hopkins University Applied Physics Laboratory LLCSenior Electronic and Optical Materials Device Fabrication EngineerLaurel, MDBuild and maintain version-controlled GDS/layout databases with Python-based automation for parametric layout generation, fracturing, and design rule checking, and develop data-analysis pipelines linking design, fabrication, and metrology data for CD, overlay, and yield trends. The role is predominantly fabrication-focused, with a majority of working hours spent in a cleanroom or laboratory environment, including the cleanroom at JHU-APL in Laurel, MD and other multi-user facilities within a 20 min to 1 hr drive.
Associate Electronic and Optical Materials Device Fabrication Engineer Johns Hopkins Applied Physics LaboratoryAssociate Electronic and Optical Materials Device Fabrication EngineerLaurel, MarylandFull timeMaintain version-controlled GDS/layout databases with Python-based automation for parametric layout generation, fracturing, and design rule checking, and develop data-analysis pipelines linking design, fabrication, and metrology data for CD, overlay, and yield trends. The role is predominantly fabrication-focused, with a vast majority of working hours spent in a cleanroom or laboratory environment, including the cleanroom at JHU-APL in Laurel, MD and other multi-user facilities within a 20 min to 1 hr drive.
Senior Electronic and Optical Materials Device Fabrication Engineer Johns Hopkins Applied Physics LaboratorySenior Electronic and Optical Materials Device Fabrication EngineerLaurel, MarylandFull timeBuild and maintain version-controlled GDS/layout databases with Python-based automation for parametric layout generation, fracturing, and design rule checking, and develop data-analysis pipelines linking design, fabrication, and metrology data for CD, overlay, and yield trends. The role is predominantly fabrication-focused, with a majority of working hours spent in a cleanroom or laboratory environment, including the cleanroom at JHU-APL in Laurel, MD and other multi-user facilities within a 20 min to 1 hr drive.
AM Materials and Process Engineer III) Blue OriginAM Materials and Process Engineer III)Washingtonand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Liaison/Material Review Board Engineer Northrop Grumman CorpLiaison/Material Review Board EngineerDC$87,600–$131,400 / yearBachelors degree in a Science, Technology, Engineering or Mathematics (STEM) discipline with a minimum of 2 years of related professional/military experience to include a background in composite airframe structures or a masters degree in a Science, Technology, Engineering or Mathematics (STEM) discipline with 0 years of experience. The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidates experience, education, skills and current market conditions.
Construction Materials Testing Project Manager - Annapolis Junction, MD Hillis-Carnes Engineering Associates IncConstruction Materials Testing Project Manager - Annapolis Junction, MDAnnapolis Junction, MD$1–$3 / hourHillis-Carnes Engineering Associates (HCEA) is a multi-disciplined ENR Top 500 engineering firm with 20 offices in the mid-Atlantic. Preferred 3-5 years of field or project management experience in Geotechnical Engineering, Construction Materials Testing, or Construction Project Management.
Construction Materials Testing Project Manager - Washington, D.C. Hillis-Carnes Engineering Associates IncConstruction Materials Testing Project Manager - Washington, D.C.Washington, DC$1–$3 / hourHillis-Carnes Capitol Services (HCCS) is a multi-disciplined ENR Top 500 engineering firm with 20 offices in the mid-Atlantic. Preferred 3-5 years of field or project management experience in Geotechnical Engineering, Construction Materials Testing, or Construction Project Management.
Construction Materials Testing Project Manager Hillis-CarnesConstruction Materials Testing Project ManagerAnnapolis Junction, MD$1–$3 / hourHillis-Carnes Engineering Associates (HCEA) is a multi-disciplined ENR Top 500 engineering firm with 20 offices in the mid-Atlantic. Preferred 3-5 years of field or project management experience in Geotechnical Engineering, Construction Materials Testing, or Construction Project Management.
Director – Cementitious Systems & Materials Structural TechnologiesDirector – Cementitious Systems & MaterialsColumbia, MarylandThis role is primarily aligned with SIMCO, with strong integration into Structural Technologies, and is responsible for ensuring that material systems are technically sound, scalable across operations, and effectively applied in the field. With over 2,500 employees working from locations nationwide and in select international markets, we serve the Commercial, Public, Transportation Industrial, and Power markets to tackle the toughest construction challenges.
Textile Materials Developer Booz Allen Hamilton IncTextile Materials DeveloperLorton, VA$69,400–$158,000 / yearOnsite: If this position is listed as onsite, work will primarily be performed at a Booz Allen office or customer facility, where employees will collaborate directly with colleagues and customers as required by the role. Salary at Booz Allen is determined by various factors, including but not limited to location, the individual's particular combination of education, knowledge, skills, competencies, and experience, as well as contract-specific affordability and organizational requirements.
Construction Materials Testing Technician 2MNextConstruction Materials Testing TechnicianCollege Park, MarylandNon-Exempt 02/10/2023 P OSITION S UMMARY This position involves providing material testing, construction observation from a quality standpoint, and construction inspections on assigned field projects according to the applicable specification for independent testing laboratories. Responsibilities include, but are not limited to, sample preparation, collection & testing, field observations, general inspections, and documentation of construction activities on site pertaining to soil, concrete, grout, mortar, and asphalt.
FIREFIGHTER (HAZARDOUS MATERIALS OPERATIONS) - DIRECT HIRE AUTHORITY United States Air ForceFIREFIGHTER (HAZARDOUS MATERIALS OPERATIONS) - DIRECT HIRE AUTHORITYWashington, DC$45,409–$59,031 / yearIdeal Candidate: Looking for a Term Firefighter (GS-0081-06) to work at the 96 Test Wing, 96 Civil Engineer Group, 96 Civil Engineer Squadron, Fire & Emergency Services Flight (96 CES/CEF) at Eglin AFB, in Florida, to serve as a Firefighter assigned to a crew engaged in airfield, structural firefighting, crash-rescue, and Hazardous Materials (HAZMAT) Operations and assist in reducing and/or eliminating potential fire hazards and reacting to the presence or potential releases of hazardous materials as a first responder to protect persons, property, and the environment. Hazards include: Burns, dehydration, and other effects of heat, smoke inhalation, falling materials, or explosions; Exposure to toxic materials and chemical, biological, radiological, nuclear, and explosive agents; Physical injury and sensory damage from firefighting activities and noise levels; Dealing with victims in varying stages of fright, panic and injury; Operating or riding on fire truck under adverse conditions or flying in aircraft to reach crash sites of fires in outlying areas.
Field Service Representative - Commercial Roofing and Building Materials - Base Salary to 90k/year - Baltimore, MD AllSearch Professional Staffing Inc.Field Service Representative - Commercial Roofing and Building Materials - Base Salary to 90k/year - Baltimore, MDBaltimore, MD$80,000–$90,000 / yearOur client, a well-established manufacturer of specialty building materials supporting commercial and industrial construction, is seeking a Field Service Representative to provide technical support, installation oversight, and quality assurance across active job sites. This role works directly with contractors, architects, engineers, and building owners to ensure proper installation, troubleshoot field issues, and support successful project execution.
Director - Cementitious Systems & Materials Structural Technologies LLCDirector - Cementitious Systems & MaterialsColumbia, MDThis role is primarily aligned with SIMCO, with strong integration into Structural Technologies, and is responsible for ensuring that material systems are technically sound, scalable across operations, and effectively applied in the field. With over 2,500 employees working from locations nationwide and in select international markets, we serve the Commercial, Public, Transportation Industrial, and Power markets to tackle the toughest construction challenges.
Engineering Material Planner Herrick Technology Laboratories Inc.Engineering Material PlannerGermantown, MD$70,000–$120,000 / yearPerform clear-to-build assessments of Bills of Materials (BOM) and track material logistics using Material Requirement Planning (MRP) system, and computer-based tools (e.g., Microsoft Office suite) for schedule and inventory assessments and reporting. Attend Engineering project meetings and adjust inventory schedules and prioritization of procurement, delivery, and kitting efforts, as required, to maintain alignment to project schedules.
Material Chemist Booz Allen Hamilton IncMaterial ChemistLorton, VA$69,400–$158,000 / yearIn this role, you will do that by working in a dynamic team that is responsible for developing, integrating, testing, and transitioning unique soft material technologies that result in emerging fieldable solutions for our defense customers. Onsite: If this position is listed as onsite, work will primarily be performed at a Booz Allen office or customer facility, where employees will collaborate directly with colleagues and customers as required by the role.
Material Handler Boise Cascade CoMaterial HandlerBaltimore, MDWe are committed to investing in them and that is why we offer a comprehensive benefits package designed to have a positive impact on all areas on your life - from health and well-being, career, and community, to financial security and personal safety, with many benefits beginning on your first day of employment. We are one of the largest producers of engineered wood products and plywood in North America and a leading U.S. wholesale distributor of building materials.
Structural Engineer Keller North America, Inc.Structural EngineerWoodbridge, VASuccessful candidates will work with the design and construction of post tensioned system in concrete structures such as high rise condominiums, apartment buildings, office buildings, parking garages. Suncoast is a specialty concrete contractor ranked in the top 100 in the ENR 600 specialty contractors and the largest supplier of post tensioned material for commercial buildings in the country.
Supervisory General Engineer/Architect (Director) White House USASupervisory General Engineer/Architect (Director)Washington, DC$143,913–$197,200 / yearTo be employed by the Architect of the Capitol in a paid position, an individual must meet one of the categories below: A citizen of the United States; A person who is lawfully admitted for permanent residence and is seeking citizenship as outlined in 8 U.S.C. 1324b(a)(3)(B); A person who is admitted as a refugee under 8 U.S.C. 1157 or is granted asylum under 8 U.S.C. 1158 and has filed a declaration of intention to become a lawful permanent resident and then a citizen when eligible; A person who owes allegiance to the United States (nationals of American Samoa, Swains Island, and the Northern Mariana Islands, and nationals who meet other requirements described in 8 U.S.C. 1408); or. The adequacy of such background must be demonstrated by one of the following: (a) current registration as a professional engineer by any State, the District of Columbia, Guam, or Puerto Rico; (b) evidence of having successfully passed the Engineer-in-Training (EIT) examination or the written test required for professional registration; (c) successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences that are fully acceptable toward meeting the requirements of a professional engineering curriculum; or (d) successful completion of a curriculum leading to a bachelors degree in engineering technology or in an appropriate professional field.
Senior Electrical Engineer, Data Centers - Remote (U.S.) AECOMSenior Electrical Engineer, Data Centers - Remote (U.S.)Arlington, VARemoteWe invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. Preferred Qualifications: Bachelor's degree in Electrical Engineering plus ten (10) years of relevant experience in electrical design and/or electrical engineering, with a focus on data center infrastructure, or demonstrated equivalency of experience and/or education.
NewCIVIL ENGINEER District Of ColumbiaCIVIL ENGINEERWashington, DCExcellent oral and written communication skills are required to concisely express artistic ideas and plans, to develop and present project briefings to agency executives, team members, as well as community groups, Advisory Neighborhood Commissions, Civic Associations, utility companies and other stakeholders. Performs individually or as a team leader, projects typically requiring the knowledge of the physical sciences and mathematics underlying engineering, and specialized knowledge of mechanics of solids, particularly of soils, hydraulics, theory of structure, strength of materials, engineering geology, and/or surveying.
Mechanical Engineer White House USAMechanical EngineerDC$120,579–$156,755 / yearThe Engineer will provide technical assistance to evaluate and recommend specifications, oversee and perform design services, and perform construction inspections for various highly complex engineering projects with an emphasis on the mechanical infrastructure systems in the power plant and utility distribution system. The distribution system distributes steam and chilled water from the CPP to the Government Printing Office (GPO), Union Station, Library of Congress, and the Capitol Campus (House and Senate Office Buildings, the Capitol Building, the Capitol Visitor Center, U.S. Botanic Garden, and the Supreme Court).
Regulatory Scientific Reviewer (Biomedical Engineer) US Department of Health and Human ServicesRegulatory Scientific Reviewer (Biomedical Engineer)Silver Spring, MD$121,785–$169,583 / year4. Related curriculum -- Successful completion of a curriculum leading to a bachelors degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelors degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. 3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
Public Notice for Electronics Engineer (Direct Hire) U.S. Department of TransportationPublic Notice for Electronics Engineer (Direct Hire)DC$34,799–$164,301 / yearSpecified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. Related curriculum -- Successful completion of a curriculum leading to a bachelors degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Specialized Experience may include but are not limited to: experience with reviewing, analyzing and revising publications and/or technical manuals pertaining to electronic equipment repair; designing/revising the implementation of new procedures and requirements for system maintenance; performing operational engineering modifications/restoration for complex communications, surveillance or navigational systems/equipment.
Supervisory General Engineer United States ArmySupervisory General EngineerWashington, DC$147,945–$192,331 / yearIn addition to meeting the basic requirement above, you must also meet the qualification requirements listed below: Specialized Experience: One year of specialized experience which includes: 1) Leading a team or working group in a scientific/engineering program or project; 2) Conducting strategic engineering program/project planning for allocation of resources; 3) Overseeing the administration of support contracts; and 4) Developing policy and functional guidance for engineering activities. FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university.