NewSourcing Manager, Mechanical (Starshield) SpaceXSourcing Manager, Mechanical (Starshield)Hawthorne, CA$120,000–$170,000 / yearWith the proven ability to iterate rapidly, SpaceX's unique full-stack approach in developing end-to-end systems, from launch vehicles to user terminals, enables the deployment of capabilities at scale with unprecedented speed. Starshield's proliferated low-Earth orbit architecture provides inherent resiliency and constant connectivity to on-orbit assets, while SpaceX's proven rapid launch capability provides expedient and economical access to space.
Sr Robotics Engineer TechoundsllcSr Robotics EngineerIrvine, CaliforniaHardware Design & Development Design, prototype, and test electronic systems for professional underwater ROVs, including power electronics, motor controllers (ESCs), sensor interfaces, and communication systems. Cross-Functional Collaboration Work closely with mechanical engineers, software developers, and production staff to deliver fully integrated ROV systems.
Sr Electronics Engineer TechoundsllcSr Electronics EngineerIrvine, CaliforniaHardware Design & Development Design, prototype, and test electronic systems for professional underwater ROVs, including power electronics, motor controllers (ESCs), sensor interfaces, and communication systems. Cross-Functional Collaboration Work closely with mechanical engineers, software developers, and production staff to deliver fully integrated ROV systems.
Spacecraft Avionics Engineer (Mid) Apex SpaceSpacecraft Avionics Engineer (Mid)Los Angeles, CA$125,000–$155,000 / yearSystem Integration: Collaborate with cross-functional teams, including mechanical engineers, systems engineers, and software engineers, to ensure seamless integration of avionics subsystems into the satellite platform. Electrical Board Design: Design and create electrical boards, including printed circuit boards (PCBs), considering electrical component placement, signal routing, and manufacturability.
Spacecraft Avionics Engineer (Early) Apex SpaceSpacecraft Avionics Engineer (Early)Los Angeles, CA$105,000–$135,000 / yearSystem Integration: Collaborate with cross-functional teams, including mechanical engineers, systems engineers, and software engineers, to ensure seamless integration of avionics subsystems into the satellite platform. Electrical Board Design: Design and create electrical boards, including printed circuit boards (PCBs), considering electrical component placement, signal routing, and manufacturability.
NewSoftware Engineer (New Grad Summer 2027) FreeformSoftware Engineer (New Grad Summer 2027)Los Angeles, CA$125,000–$150,000 / yearYou'll work with a talented engineering team from some of the world's most innovative companies across a range of projects including controls, high-speed data acquisition, high-performance computing (GPU's and FPGA's), and geometry processing pipelines that enable precise and fully automated manufacturing at scale. In addition to the significant stock option package, the estimated salary range for this role is $125,000-$150,000, dependent on the candidate's academic level (Bachelors, Masters, or PhD) and demonstrated out of classroom experience.
Software Engineer (New Grad December 2026) FreeformSoftware Engineer (New Grad December 2026)Los Angeles, CA$125,000–$150,000 / yearYou'll work with a talented engineering team from some of the world's most innovative companies across a range of projects including controls, high-speed data acquisition, high-performance computing (GPU's and FPGA's), and geometry processing pipelines that enable precise and fully automated manufacturing at scale. In addition to the significant stock option package, the estimated salary range for this role is $125,000-$150,000, dependent on the candidate's academic level (Bachelors, Masters, or PhD) and demonstrated out of classroom experience.
Sr. Design Engineer Thermal Engineering InternationalSr. Design EngineerLa Palma, CA$110,000–$130,000In this pivotal role, you will be responsible for reviewing customer specifications, performing mechanical design calculations and associated analysis, preparing manufacturing drawings as well as presenting, documenting and updating of these activities to others as necessary. To provide greater transparency to candidates, we include base pay ranges for all US-based job postings that encompass all potential locations and levels for the open positions.
NewAssociate Level Engineers - Satellite/Space Systems Rotational Program BoeingAssociate Level Engineers - Satellite/Space Systems Rotational ProgramEl Segundo, California$98,600–$133,400 / yearThe Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), computer science, engineering data science, mathematics, physics or chemistry (e.g.
Additive Manufacturing Development Engineer FreeformAdditive Manufacturing Development EngineerLos Angeles, CA$90,000–$140,000 / yearResponsibilities: Understand printing system capabilities and roadmap, and work with internal engineering teams (mechanical, electrical, software) to implement solutions that further automate the printing process for high volume production. In addition to the significant stock option package, the estimated salary range for this role is $90,000-$140,000, dependent on the candidate's academic level (Bachelors, Masters, or PhD) and demonstrated out of classroom experience.
Structures Engineer II InversionStructures Engineer IIEl Segundo, CA$110,000–$150,000 / yearYou'll drive primary structure design for a novel reentry vehicle working closely with cross-functional teams to solve complex packaging and manufacturability problems while driving designs toward real hardware. ITAR Compliance: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
Senior Dynamics Engineer InversionSenior Dynamics EngineerCulver City, CA$137,000–$193,000 / yearITAR Compliance: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. You'll work across vehicle architecture, structures, mechanisms, and test to define critical dynamic environments, mature structural and deployment system designs, and validate key aspects of vehicle performance through analysis and hardware correlation.
Staff Mechanisms Engineer InversionStaff Mechanisms EngineerCulver City, CA$161,000–$221,000 / yearITAR Compliance: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Develop and execute comprehensive test campaigns including functional testing, environmental qualification (vibration, shock, thermal, TVAC, EMI/EMC), life cycle testing, and acceptance testing.
Senior Test Engineer InversionSenior Test EngineerCulver City, CA$137,000–$193,000 / yearITAR Compliance: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. You'll lead testing from early component and subsystem development through integrated demonstration, working closely with design, analysis, manufacturing, and external test partners to retire risk and validate system performance.
Electro-Mechanical Technician Rocket Lab CorporationElectro-Mechanical TechnicianPasadena, CA$30–$40 / hourTo conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. We've engineered hardware that has operated on the surface of Mars on NASA's Perseverance rover, supported lunar exploration through the CADRE rover program, and developed precision mechanisms for spacecraft subsystems including solar array drives, antenna gimbals, and optical payloads.
Automation and Controls Engineer Castelion CorporationAutomation and Controls EngineerTorrance, CaliforniaTo conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Success requires a practical application of engineering principles to design, build, test, and commission process hardware, integrate new technologies into our production line, and integrate process equipment and technologies within our production line.
Senior Valve Design Engineer I CesiumAstroSenior Valve Design Engineer IEl Segundo, CA$118,000–$142,000 / yearPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. The ideal candidate will have a strong background in CAD systems, CFD and FEA simulations, combined with hands-on experience in experimental development and testing of all types of valves (inc.
Human Factors Engineer SkyryseHuman Factors EngineerEl Segundo, CA$100,000–$180,000 / yearYou bring deep expertise in human factors as it applies to physical vehicle packaging and design, and ideally some mechanical engineering experience designing and integrating components. Bachelors of Science in Mechanical Engineering, Industrial Engineering, Aerospace Engineering, Human Factors Engineer and/or Psychology.
Mechanical Technician (Facilities) SpaceXMechanical Technician (Facilities)Hawthorne, CA$23–$32.50 / hourCollaborate with engineers, managers, and customers to maintain systems in peak operating condition, and to develop/update detailed work instructions for proper equipment preventative maintenance dedicated to ensuring zero unplanned interruption in services to employees and customers. To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Robotics Engineer: Government Projects GrayMatter RoboticsRobotics Engineer: Government ProjectsCarson, CaliforniaIn order to comply with the export regulations of the United States Government, it is required that the applicant must fall under one of the following categories: (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (i.e. current green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158. The Robotics Engineer: Government Projects will enable customer success by leading the implementation, deployment, and support activities of innovative robotic manufacturing systems for surface treatment applications.