NewTravel Cardiac Cath Technician - $2,306 per week HCS 247Travel Cardiac Cath Technician - $2,306 per weekLawrenceville, GAOur clinical coverage includes Registered Nurse specialties such as ER, ICU, Med-Surg, Telemetry, Step-Down, OR, PACU, L&D, Mother/Baby, NICU, Cath Lab, Endoscopy, and more along with a full range of allied and imaging professionals, including Respiratory Therapists, Surgical Technicians, X-Ray Techs, CT Techs, MRI Techs, Interventional Radiology (IR) Techs, Cath Lab Techs, Ultrasound/Sonographers, Mammography Techs, and Nuclear Medicine Techs. HCS 24/7 is a national healthcare staffing organization specializing in the placement of Registered Nurses and Allied health professionals across acute care and other clinical settings.
Travel Nuclear Medicine Tech - $2,616 per week in Canton, GA Pride HealthTravel Nuclear Medicine Tech - $2,616 per week in Canton, GACanton, GA$2,616Responsibilities include preparing and handling radioactive materials, performing scans, and assisting doctors in interpreting results. A Nuclear Medical Technician administers radioactive substances to patients for diagnostic imaging purposes.
PET/ Nuclear Medicine Technologist University Cancer & Blood CenterPET/ Nuclear Medicine TechnologistCovington, GeorgiaPerforms diagnostic PET/CT or Nuclear Medicine imaging procedures to include injection of radio-pharmaceutical and/or IV contrast, protocol setup, patient position, reconstruction and filming of images, network image transfers. Must be able to operate glucometer to check patient’s blood sugar prior to injection of Isotope for PET and understand the range of glucose levels in order to obtain diagnostic scan.
Nuclear Med Tech - Cardiovascular Imaging, PRN Piedmont Healthcare Inc.Nuclear Med Tech - Cardiovascular Imaging, PRNFayetteville, GeorgiaPer diemGraduate of a Nuclear Medicine program accredited by either the Joint Review Committee on Education Programs in Nuclear Medicine Technology (JRCNMT) or the Nuclear Medicine Technology Certification Board (NMTCB). Registered nuclear technologist with either the American Registry of Radiologic Technologist (Nuclear) ARRT (N) or the Nuclear Medicine Technologist Certification Board (NMTCB-CNMT).
Senior Registered Engineer - Structural - Nuclear Black & Veatch Holding CoSenior Registered Engineer - Structural - NuclearAtlanta, GAExecute complex structural analysis, perform calculations, and prepare sketches and drawings for the design of Hydropower and Hydraulic Structures, including powerhouses, dams, spillways, penstocks, and other complex structural facilities. Serve in the role of Subject Matter Expert during Comprehensive Assessment of existing hydropower projects under the FERC Part 12d dam safety program including performing dam safety evaluations, risk analysis, and structural stability assessments.
CMT Engineering Technician Nova Engineering And Environmental LLCCMT Engineering TechnicianNorcross, GAKey Responsibilities: Perform field testing and inspection of construction materials, including: Soil compaction testing, Concrete sampling, testing, and placement inspections; Asphalt density testing; and Reinforcing steel inspections. NOVA will continue to expand its reach and reputation as a leader in the testing, inspection, and consulting fields with a strong legacy of quality and integrity by promoting our best internal resources and recruiting a diverse culture of valued and exceptional talent.
Engineering Technician IV Terracon Consultants IncEngineering Technician IVLawrenceville, GAPreferred Certification: Certifications in one or more of the following areas: NICET Level III certification in Construction Materials Testing in two or more of the following categories or NICET Level III in at least one of the following categories: Asphalt, Concrete, Soils. ICC certification in two or more of the following categories: Reinforced Concrete, Spray-applied Fireproofing, Structural Masonry, Prestressed/Post-Tensioned Concrete, Structural Steel - Bolting, Structural Steel - Welding.
Construction Materials Testing (CMT) Engineering Technician II Terracon Consultants IncConstruction Materials Testing (CMT) Engineering Technician IILawrenceville, GAICC certification in one or more of the following categories: Reinforced Concrete, Spray-applied Fireproofing, Structural Masonry, Prestressed/Post-Tensioned Concrete, Structural Steel - Bolting, Structural Steel - Welding. American Society for Nondestructive Testing (ASNT) Level II certification in more than one of the following areas: Visual Testing (VT), Magnetic Particle Testing (MT), Dye Penetrant Testing (PT), Radiographic Testing (RT), Ultrasonic Testing (UT).
NewEngineering Technician CMT Geo-Hydro EngineersEngineering Technician CMTLawrenceville, GAOur employees enjoy competitive pay, excellent benefits, growth opportunities, gain valuable hands-on experience and certifications, participate in innovative solutions and robust training and have the opportunity to make Geo-Hydro a part of their long-term career! Soil Density Testing: The technician must be able to repeatedly drop a 25-pound drop slide hammer to drive sampling tubes into the ground and then manually excavate the sampling tubes back out of the ground with mattock and shovel.
NewEngineering Technician IV TerraconEngineering Technician IVLawrenceville, GAPreferred Certification: Certifications in one or more of the following areas: NICET Level III certification in Construction Materials Testing in two or more of the following categories or NICET Level III in at least one of the following categories: Asphalt, Concrete, Soils. With services including site assessment, planning and permitting including cultural and natural resources, sustainability and resiliency, regulatory compliance, and industrial hygiene and safety, we're at the forefront of helping clients succeed and communities thrive.
ACI Engineering Technician I Terracon Consultants IncACI Engineering Technician ILawrenceville, GACommunicate with project manager, engineering technicians, client representative, contractor's representative and others as applicable regarding the construction site, project requirements, and testing, observation, and inspection requirements and results. Essential Roles and Responsibilities: Under close supervision of higher level technicians or staff professionals, assist on tasks and perform basic testing and observations duties.
Calibration Technician Crane CoCalibration TechnicianKennesaw, GAPrinciple Responsibilities: • Acceptance and verification of receipt of parts and sub-components from Inventory • Manufacturing and assembly of CRANE Nuclear testing products, including strain sensors • Serialization of finished components and the maintenance of serialization log • Troubleshooting and repairing customer-owned and rental diagnostic equipment • Completing and submitting repair evaluation forms for customer equipment within 1 workday after repair evaluation has been made • Maintaining and updating manufacturing procedures • Establishing and maintaining a working knowledge of the QA manual and the QA aspects • Performing calibration functions • Performing testing of equipment • Establishing and maintaining a detail knowledge of diagnostic equipment • Other duties as assigned. Qualifications/Experience: • GED / High School diploma required • Must have a minimum of 3 years working with electricity and/ or electronic components experience • Must have excellent soldering skills • Ability to complete component level repairs on circuit boards • Intermediate level - Excel skills (data manipulation, validation, v-lookups, and pivot tables) required • Must exhibit high attention to detail.
NewHardware Integration/Test Technician MAG USAHardware Integration/Test TechnicianAtlanta, GA$85,000–$95,000 / yearWe encourage you to learn more about our Total Rewards Program by visiting the Resource page on our Careers site: Salary at MAG Aerospace is determined by various factors including but not limited to location, the particular combination of education, knowledge, skills, competencies, and experience as well as contract-specific affordability and organizational requirements. Fabricate cables and harnesses and terminate connectors (circular military specification, RF coaxial, and fiber) to the engineering harness designs and controlled drawings.
ICC Soil Technician I Terracon Consultants IncICC Soil Technician ILawrenceville, GACommunicate with project manager, engineering technicians, client representative, contractor's representative and others as applicable regarding the construction site, project requirements, and testing, observation, and inspection requirements and results. Essential Roles and Responsibilities: Under close supervision of higher level technicians or staff professionals, assist on tasks and perform basic testing and observations duties.
Senior Inspector/ Senior Engineering Technician 2MNextSenior Inspector/ Senior Engineering TechnicianAtlanta, GeorgiaAbility to climb ladders and scaffolding •Ability to physically maneuver construction sites and excavations •Visual/hearing ability sufficient to comprehend written/verbal communications in the English language, including the ability to communicate directly and over the telephone and be understood. Key responsibilities include conducting special inspections for project document and code compliance, documenting observations and discrepancies, and effectively communicating with project staff and construction teams.
DoD SkillBridge: Field Technician (501749) Vets2PMDoD SkillBridge: Field Technician (501749)Norcross, GeorgiaMeet with the customers (forâ¯Service) to diagnose their HVAC/Building Automation, Fire/Life Safety, or Integrated Security electronic control system malfunctions and use your expertise to maintain, repair, or (forâ¯Solutions) install new equipment; commissioning if needed. Interface with the customers: complete the service work documentation, assist them with training instructions needed for future ease-of-use, and (most importantly) recommend system enhancements providing a value-added partner relationship.
Roadway Testing Technician (RTT) / CMT Inspector WILLMER ENGINEERING INCRoadway Testing Technician (RTT) / CMT InspectorAtlanta, GAAs our Construction Materials Testing team continues to grow, we are seeking a Roadway Testing Technician (RTT) / Construction Materials Testing (CMT) Technician to support a variety of commercial, industrial, transportation, and public infrastructure projects throughout the Atlanta area. Join a Growing Construction Materials Testing Team Willmer Engineering is a multidisciplinary engineering consulting firm specializing in geotechnical engineering, construction materials testing (CMT), special inspections, and environmental services.
Drafter/CAD Technician - Atlanta, GA Southern CoDrafter/CAD Technician - Atlanta, GAAtlanta, GAThe company has electric operating companies in three states, natural gas distribution companies in four states, a competitive generation company, a leading distributed energy solutions provider with national capabilities, a fiber optics network and telecommunications services. Job Summary: This position resides within the Geographic Solutions and Services organizations and is responsible for providing GIS/drafting services, map products, overlays, and data extraction in support of Distribution Centralized Engineering Services (CES) projects.
Calibration Technician Crane Nuclear PFT CorpCalibration TechnicianKennesaw, GeorgiaCrane Nuclear provides valves, valve parts, valve testing products, and valve maintenance/testing services to domestic and international commercial nuclear power customers. Crane Nuclear is a Business Unit within the Fluid Handling Business Segment of the Crane Corporation, a US multi-national company which specializes in highly engineered industrial products in niche markets.
Manufacturing Engineering Technician 2nd Shift Anduril Industries IncManufacturing Engineering Technician 2nd ShiftAtlanta, GA$111,000–$147,000 / yearYour primary responsibility will be responding to and resolving production system issues in real-time, leveraging your strong Linux knowledge and troubleshooting skills to unblock a plethora of problems ranging from networking to hardware connectivity on our Group 3 UAS platform: Altius. Working closely with our Production Operations, Manufacturing Engineering, and Software Engineering teams, you will focus on diagnosing problems, curating and documenting troubleshooting workflows, and escalating deeper technical challenges to engineering support.
Construction Materials Testing Technician III WSP Global IncConstruction Materials Testing Technician IIIAtlanta, GAWSP's Engineered Construction team is growing, and we have opportunities for Construction Materials Testing Technicians in Atlanta, GA to perform field inspections and observations for commercial, industrial, and transportation related construction projects. Any unsolicited resumes, including those submitted to hiring managers or other business leaders, will become the property of WSP and WSP will have the right to hire that candidate without reservation - no fee or other compensation will be owed or paid to the recruiter, employment agency, or other staffing service.
Construction Materials Testing (CMT) Technician | RTT • ICC • ACI WILLMER ENGINEERING INCConstruction Materials Testing (CMT) Technician | RTT • ICC • ACIAtlanta, GAPreferred Current certifications in one or more of the following: GDOT Roadway Testing Technician (RTT) ICC Special Inspector Reinforcing Steel (Rebar) ACI Concrete Field Testing Technician Grade I Nuclear Density Gauge NICET. High School Diploma or GED Valid drivers license with a satisfactory driving record Ability to lift 70 pounds Ability to work outdoors in varying weather conditions Strong attention to detail and commitment to safety.
Soil Technician Actalent IncSoil TechnicianRoswell, GA$25–$30 / hourThe organization invests in employee development and encourages upward mobility, helping technicians move beyond basic concrete or soils work into more advanced roles and certifications, including opportunities on projects in the Caribbean and Virgin Islands. The role involves working outdoors in all seasons and varying weather conditions, driving to multiple job sites, and performing hands-on testing and inspection tasks on soils, concrete, asphalt, and other construction materials.
Field Technician II Universal Engineering SciencesField Technician IIKennesaw, GAAbility to read & write, including interpreting documents such as safety rules, operating and maintenance instructions, and procedure manuals, as well as the ability to write routine reports and correspondence and speak effectively with colleagues, supervisors, and customers/clients. Ability to use your senses to see (including close, distant, and peripheral vison, depth vision, and ability to focus) smell, hear, touch (use hands to reach climb or balance, crouch, stoop, crawl, kneel and sit).
Protection & Controls (P&C) Technician II IV Shermco Industries IncProtection & Controls (P&C) Technician II IVAtlanta, GA$50–$95 / hourRequired Education/Experience: Ideal candidate will have 5+ years experience in the electrical testing industry with a focus working with protection and control equipment, RTU's, and telecom with HV utility, co-op, power generation, federal, or municipal clients. Job Responsibilities and Expectations: Installation, commissioning, testing, and maintenance of protective relay equipment, powerline carrier equipment, digital fault recorders (DFR's), remote terminal units (RTU's), and communication processors.
Protection & Controls (P&C) Technician II-IV Shermco Industries, Inc.Protection & Controls (P&C) Technician II-IVAtlanta, Georgia$50–$95 / hourFull timeQualifications: Required Education/Experience: Ideal candidate will have 5+ years experience in the electrical testing industry with a focus working with protection and control equipment, RTU’s, and telecom with HV utility, co-op, power generation, federal, or municipal clients. Responsibilities: Job Responsibilities and Expectations: Installation, commissioning, testing, and maintenance of protective relay equipment, powerline carrier equipment, digital fault recorders (DFR’s), remote terminal units (RTU’s), and communication processors.
Certified Pharmacy Technician, PRN Evenings WellStar Health System IncCertified Pharmacy Technician, PRN EveningsMarietta, GACode Carts / Kits - Must restock code carts and other kits returned to pharmacy according to departmental procedure and ensure required inspections are completed. Product Preparation- must properly prepare, measure, count, medications including compound ointments, creams, oral solutions, oral solids, IV, etc.
Certified Pharmacy Technician Overnight - Cobb Hospital Pharmacy WellStar Health System IncCertified Pharmacy Technician Overnight - Cobb Hospital PharmacyGACode Carts / Kits - Must restock code carts and other kits returned to pharmacy according to departmental procedure and ensure required inspections are completed. Product Preparation- must properly prepare, measure, count, medications including compound ointments, creams, oral solutions, oral solids, IV, etc.
IV ROOM Pharmacy Technician (PRN) WellStar Health System IncIV ROOM Pharmacy Technician (PRN)GASmall volume- Demonstrate knowledge of preparing small volume admixtures Specialty solutions- Demonstrate knowledge of preparing epidural, intrathecal, intravenous, intramuscular, sterile syringes and chemotherapy (when applicable) Syringes- Demonstrate knowledge of preparing neonatal syringes (when applicable) Large volume- Demonstrate knowledge of preparing large volume solutions Room cleaning - Demonstrate knowledge of policies and procedures regarding maintaining clean room environment. Required Minimum Experience: Hospital pharmacy experience Preferred and General experience in all phases of pharmacy operations including basic knowledge of automated dispensing cabinets, inventory management, medication order interpretation, and Ga.
Certified Pharmacy Technician, FT Evening IV Tech - 7on/7off WellStar Health System IncCertified Pharmacy Technician, FT Evening IV Tech - 7on/7offKennestone Hospital, GACode Carts / Kits - Must restock code carts and other kits returned to pharmacy according to departmental procedure and ensure required inspections are completed. Product Preparation- must properly prepare, measure, count, medications including compound ointments, creams, oral solutions, oral solids, IV, etc.
Field Materials Testing Technician Exp Global IncField Materials Testing TechnicianAlpharetta, GAHere, you join a team that leverages differences, harnesses their entrepreneurial spirit in an employee-owned company, that believes diversity is what gives us strength, seeks sustainable results and shares ambitions for each other, our clients and the communities we are part of and serve. As a team of engineers, architects, designers, scientists, creators and a community of professionals, we bring diverse and talented people together to solve the world's most complex challenges.
Lead BESS Technician Pearce ServicesLead BESS TechnicianAtlanta, GA$45–$60 / hourPearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. We are looking for experienced field professionals who thrive in mission-critical environments as hands-on technical leaders with strong troubleshooting skills, commissioning experience, and the ability to lead field teams safely and efficiently on projects located throughout United States.
Process Engineering Technician Surge StaffingProcess Engineering TechnicianMarietta, GA$20The ideal Process Engineering Technician has experience with injection molding processes, mold setup, troubleshooting, quality inspections, and continuous improvement initiatives. This hands-on role supports production, manufacturing, automation, and engineering operations in a fast-paced injection molding environment.
Asphalt Plant Quality Control (QC) Technician- Burford Blount Construction Company,Inc.Asphalt Plant Quality Control (QC) Technician- BurfordLilburn, GAThis position involves performing laboratory and field testing, monitoring plant operations, documenting test results, and working closely with plant operators, paving crews, and management to maintain high-quality asphalt production. The Asphalt Plant Quality Control (QC) Technician is responsible for ensuring all asphalt products meet company, state, and project specifications.
NewChemical Technician (Shift) Southern CoChemical Technician (Shift)Atlanta, GAThe company has electric operating companies in three states, natural gas distribution companies in four states, a competitive generation company, a leading distributed energy solutions provider with national capabilities, a fiber optics network and telecommunications services. Committed to delivering clean, safe, reliable, and affordable energy at rates below the national average, Georgia Power maintains a diverse, innovative generation mix that includes nuclear, coal and natural gas, as well as renewables such as solar, hydroelectric and wind.
Roadway Testing Technician 2MNextRoadway Testing TechnicianAtlanta, GeorgiaIndividuals may perform other duties as assigned, notwithstanding work in other functional areas to cover absences and relief, to equalize peak work periods or otherwise to balance the workload. In this role, you will perform quality assurance testing and inspections for roadway projects, ensuring materials and construction processes meet GDOT and project specifications.
Engineering Lab Technician Kennesaw State UniversityEngineering Lab TechnicianMarietta, GAPrepares, operates, trains and oversees operation of a wide variety of mechanical equipment such as 3D printers, power tools, CNC Mills/Lathes, water jet cutters, welders, manual mills/lathes, robotic arms. Additionally, USG supports Freedom of Expression as stated in Board Policy 6.5 Freedom of Expression and Academic Freedom found on-line at https://www.usg.edu/policymanual/section6/C2653 .
NewStress Lab Technician - Paramedic - System PRN Northeast Georgia Medical CenterStress Lab Technician - Paramedic - System PRNGainesville, GeorgiaTechnician II runs the stress procedure independently and is responsible for the clinical well-being of the patient during these procedures, while imaging staff performs only the imaging component of the test to include: Nuclear stress tests (PET-CT, PET and SPECT imaging), Echo/Vascular stress tests (Stress Echo, Dobutamine Stress Echo, Low-dose Dobutamine, and Exercise Tolerance Test), Tilt Table Testing, Cardiopulmonary Exercise Testing, Electrocardiogram, and Cardiac MRI Stress Testing. Ensures that correct patient data is entered into stress testing machine and that correct technical factors for each patient are selected to achieve optimal picture quality.
Laboratory Technician - Construction Materials Testing (CMT) Terracon Consultants IncLaboratory Technician - Construction Materials Testing (CMT)Lawrenceville, GAThe role requires effective communication with laboratory supervisors, project managers, client representatives, contractor personnel, and other stakeholders regarding test results, project requirements, and field observations. General Responsibilities: This position involves performing laboratory testing and as required, field testing, observation, and inspection of construction materials such as soils, aggregates, concrete, and asphalt.
Casual Valve Technician Crane CoCasual Valve TechnicianKennesaw, GAPerform all duties safely and work in accordance with customer or CRANE procedures Disassemble, inspect, perform measurements, and assemble various types of valves Perform valve repacks and adjustments including packing consolidation Replace valve body to bonnet gaskets, flange gaskets, and other gaskets as necessary Perform valve blue checks Replace valve parts. Performs valve repacks inclusive of removing packing, cleaning, inspection, installation of new packing, consolidation of packing, and adjustment of packing.
Stress Lab Technician - Paramedic - System PRN Northeast Georgia Health System IncStress Lab Technician - Paramedic - System PRNGainesville, GATechnician II runs the stress procedure independently and is responsible for the clinical well-being of the patient during these procedures, while imaging staff performs only the imaging component of the test to include: Nuclear stress tests (PET-CT, PET and SPECT imaging), Echo/Vascular stress tests (Stress Echo, Dobutamine Stress Echo, Low-dose Dobutamine, and Exercise Tolerance Test), Tilt Table Testing, Cardiopulmonary Exercise Testing, Electrocardiogram, and Cardiac MRI Stress Testing. Preferred Licensure or other certifications: Preferred Educational Requirements: Associates Degree in Allied Health field, PALS, ASLS, ABLS, PHTLS or ITLS, NRP, STABLE or instructor of any of these.
ENGINEERING TECHNICIAN, SENIOR Fulton County GovernmentENGINEERING TECHNICIAN, SENIORAlpharetta, GAMinimum Qualifications: Associates Degree in Engineering, Construction Project Management, Environmental Science, or a related field required; Supplemented by five years of experience in Engineering, Construction Project Management, or Environmental Science to include one year lead or supervisory experience; or any equivalent combination of education, training, and experience which provides the requisite knowledge, skills, and abilities for this job. Many of the competencies and transferable skills developed through military service directly support success in this role, including: Customer service under pressure: Provided calm, clear, solutions-focused support to contractors, engineers, and the public during high-volume technical inquiries, applying mission-driven military customer service discipline to maintain professionalism under tight deadlines.
Casual Valve Technician Crane Nuclear PFT CorpCasual Valve TechnicianKennesaw, GeorgiaPerform all duties safely and work in accordance with customer or CRANE procedures Disassemble, inspect, perform measurements, and assemble various types of valves Perform valve repacks and adjustments including packing consolidation Replace valve body to bonnet gaskets, flange gaskets, and other gaskets as necessary Perform valve blue checks Replace valve parts. Performs valve repacks inclusive of removing packing, cleaning, inspection, installation of new packing, consolidation of packing, and adjustment of packing.
Engineering Technician 1 Intuitive Surgical IncEngineering Technician 1Peachtree Corners, GACertain information you provide as part of the application will be used for purposes of determining whether Intuitive Surgical will need to (i) obtain an export license from the U.S. Government on your behalf (note: the government's licensing process can take 3 to 6+ months) or (ii) implement a Technology Control Plan ("TCP") (note: typically adds 2 weeks to the hiring process). U.S. Export Controls Disclaimer: In accordance with the U.S. Export Administration Regulations (15 CFR §743.13(b)), some roles at Intuitive Surgical may be subject to U.S. export controls for prospective employees who are nationals from countries currently on embargo or sanctions status.
Mission Control Power/Environmental Technician I SwitchMission Control Power/Environmental Technician ILithia Springs, GARemoteWhile performing the duties of this job, the employee may be required to sit or stand for extended periods of time, operate a computer, and have specific vision abilities to include being able to accurately identify color coded alerts displayed via multiple monitoring systems, and can adjust focus while working with computers and business equipment. 2+ years of experience within the Information Technology field or related educational background which includes troubleshooting and critical path creation that leads to problem resolution as well as demonstrated ability to investigate complex events.
Mechanical Designer - Staff Engineering Technician - Mission Critical Black & Veatch Holding CoMechanical Designer - Staff Engineering Technician - Mission CriticalAtlanta, GA$74,360–$124,190 / yearThe Virtual Design & Data Solutions (VDDS) Staff Mechanical Engineering Technician supports the development of high quality mechanical engineering deliverables for complex infrastructure projects. We put them at the center of everything we do and empower them to grow, explore new possibilities and use their diverse talents and perspectives to solve humanitys biggest challenges in an ever-evolving world.
Civil - Staff Engineering Technician - Federal Black & Veatch Holding CoCivil - Staff Engineering Technician - FederalAtlanta, GABlack & Veatch partners with the U.S. Federal Government to deliver secure, sustainable planning and design solutions for federal facilities worldwide, reducing risk through collaboration, innovation, and reliable civil site development in complex operating environments. The Virtual Design & Data Solutions (VDDS) Staff Engineering Technician supports civil site development by producing and modifying engineering drawings and models under general supervision.
Lab Technician Cardinal Health IncLab TechnicianAtlanta, GA$15.90–$24.86 / hourConducts quality control testing of each batch (utilizing gas chromatograph, dose calibrator, multi-channel analyzer, TLC plate scanner, high pressure liquid chromatograph, analytical balance, PTS, laminar flow hood and fume hood). Nuclear Manufacturing is responsible for the manufacturing of time sensitive radiopharmaceuticals in an integrity driven, highly regulated environment (i.e. FDA, NRC, DOT) to support patient treatment through disease diagnosis, staging, and monitoring.
NewEngineering Aide - CMT Geo-Hydro EngineersEngineering Aide - CMTLawrenceville, GAOur employees enjoy competitive pay, excellent benefits, growth opportunities, gain valuable hands-on experience and certifications, participate in innovative solutions and robust training and have the opportunity to make Geo-Hydro a part of their long-term career! Soil Density Testing: The technician must be able to repeatedly drop a 25-pound drop slide hammer to drive sampling tubes into the ground and then manually excavate the sampling tubes back out of the ground with mattock and shovel.
Electrical/Harness Design Engineer MAG AerospaceElectrical/Harness Design EngineerAtlanta, Georgia$140,000–$160,000 / yearFull timeThe Electrical / Harness Design Engineer provides electrical power, grounding and bonding, and wiring and harness design across MAG Aerospace's U.S. European Command (USEUCOM) command and control portfolio: mobile command platforms, fixed and survivable C2 facilities, and integration sites. The engineer converts the platform or facility architecture and the discipline interface definitions into a buildable electrical design: power one-line diagrams, protection coordination, harness and cable designs, connector selection, and pinout definitions.