Refrigeration Appliance Technician Constellation EnergyRefrigeration Appliance TechnicianOdenton, MDNow integrated with Calpine, our portfolio includes 55 gigawatts of capacity from nuclear, natural gas, geothermal, hydro, wind and solar facilities, with the generating capacity to power the equivalent of 27 million homes. As the largest private-sector power producer in the world and the nation's largest producer of clean and reliable energy, Constellation is focused on our purpose: lighting the way to a brilliant tomorrow for all.
NewLead Nuclear Medicine Technologist US Department of Health and Human ServicesLead Nuclear Medicine TechnologistMontgomery County, MD$85,447–$111,087 / yearAdditional Qualifications requirements: You must demonstrate in your resume at least one (1) year of qualifying experience equivalent to at least the GS-10 level in the Federal service obtained in either the private or public sector, performing the following types of tasks: 1.) performing advanced Nuclear Medicine and PET/CT imaging procedures, including preparing and administering radiopharmaceuticals and operating Nuclear Medicine/PET/CT imaging systems in accordance with established protocols and safety requirements; 2.) providing technical guidance and assistance to Nuclear Medicine and PET/CT staff regarding imaging procedures, protocols, equipment operation, radiopharmaceutical handling, and/or quality control activities; 3.) coordinating and monitoring daily imaging activities and workflow to support patient scheduling, workload priorities, equipment utilization, and timely completion of Nuclear Medicine/PET/CT procedures; 4.) identifying and resolving technical or operational issues involving Nuclear Medicine/PET/CT imaging equipment, image acquisition/processing, PACS or other image archiving systems, and/or ancillary equipment; and 5.) training and providing instructions to staff or other personnel on Nuclear Medicine/PET/CT procedures, equipment, protocols, safety practices, or related technical functions. This position is designated as an "emergency essential" position and the selected candidate will be considered an "emergency essential" employee and will be required to be available, ready, willing, and able to report for duty under all circumstances (e.g., inclement weather, government closings and holidays, lapses in appropriations, non-emergency and emergency situations) for operation 24 hours a day and 365 days per year coverage.
Structural Nuclear Engineer Black & Veatch Holding CoStructural Nuclear EngineerGaithersburg, MD$137,916–$230,328 / yearCommunicates client interests and drivers to project team members and develops approaches to accommodate these concerns in the performance of the work on low to moderately complex projects. All applicants must be able to complete pre-employment onboarding requirements (if selected) which may include any/all of the following: criminal/civil background check, drug screen, and motor vehicle records search, in compliance with any applicable laws and regulations.
Engineering Technician I Terracon Consultants IncEngineering Technician IMDCommunicate with project manager, engineering technicians, client representative, contractor's representative and others as applicable regarding the construction site, project requirements, and testing, observation, and inspection requirements and results. Essential Roles and Responsibilities: Under close supervision of higher level technicians or staff professionals, assist on tasks and perform basic testing and observations duties.
Electrical/Electronic Engineering Technician BAE Systems PlcElectrical/Electronic Engineering TechnicianRockville, MD$97,008–$164,914 / yearAbout BAE Systems Intelligence & Security BAE Systems, Inc. is the U.S. subsidiary of BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services. Former U.S. Navy experience as a Missile Technician or Strategic Navigation Electronics Technician, with operational experience with Strategic Weapon Systems (SWS) and/or Attack Weapon Systems (AWS).
DoW SkillBridge Program - Air Traffic Control Systems Engineering Technician BAE Systems PlcDoW SkillBridge Program - Air Traffic Control Systems Engineering TechnicianMDAbout BAE Systems Intelligence & Security BAE Systems, Inc. is the U.S. subsidiary of BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services. This structured training program is designed to provide transitioning service members with practical civilian experience while building the technical skills necessary for a successful transition into the defense industry.
Construction Material Field Technician Hillis-CarnesConstruction Material Field TechnicianDelmar, MDFull timeCompany cell or reimbursement for use of personal phoneEmployee Self-Service PortalEmployee Referral Bonus program up to $5,000Free HCEA apparel and work boots Personal Protective Equipment and safety gearPaid mileageFun company-sponsored events, Wellness Seminars, and more! Ability to lift and/or move up to 60-80 pounds (soil and concrete samples, nuclear gauges, other equipment)Ability to work in all outdoor climates and mobility over various terrain.
IFF Engineering Technician IV (Navy Combat Systems) BAE Systems PlcIFF Engineering Technician IV (Navy Combat Systems)MDAbout BAE Systems Intelligence & Security BAE Systems, Inc. is the U.S. subsidiary of BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services. SME Leadership: Act as the primary technical authority for the AN/UPX-29(V) IFF system, supporting the Foreign Military Sales (FMS) portfolio through onsite test events, system assessments, and Fleet Modernization Program installations.
Engineering Technician - Mechanic BNHEngineering Technician - MechanicHillandale, Maryland$16.90–$26.80 / hourLeveraging the capabilities of our parent companies, BNH specializes in testing and evaluation for military and space systems combined with proven capability in large-scale Government program management, integration, engineering, and construction services for specialized and technically advanced high-hazard facilities. We chose our name to serve as an enduring reminder of our commitment to AEDC’s rich aerospace research and development legacy anchored in AEDC’s Toward New Horizons founding study and the unprecedented opportunities to greatly expand AEDC’s capabilities and capacity Beyond those existing today.
IFF Engineering Technician V (Navy Combat Systems - AN/UPX-29 ISEA) BAE Systems PlcIFF Engineering Technician V (Navy Combat Systems - AN/UPX-29 ISEA)MDAbout BAE Systems Intelligence & Security BAE Systems, Inc. is the U.S. subsidiary of BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services. The candidate will provide technical services in support of the AN/UPX-29 during grooms, Combat System Ship Qualification Trials (CSSQT), and Material Condition Assessments (MCA) and will interface directly with ships' force department heads to provide high-level status updates and recommend corrective action.
NewSCA Engineering Technician I BAE Systems PlcSCA Engineering Technician IMDAbout BAE Systems Intelligence & Security BAE Systems, Inc. is the U.S. subsidiary of BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services. Utilizes equipment which does not require interpretation including, but not limited to, computer aided tools, volt meter, multimeter, circuit tester, and logic analyzer to troubleshoot, debug, and perform routine measurements on electronic assemblies, subsystems, and/or systems.
DoD SkillBridge: Field Technician (519365) Vets2PMDoD SkillBridge: Field Technician (519365)Laurel, MarylandMeet with the customers (for Service) to diagnose their HVAC/Building Automation, Fire/Life Safety, or Integrated Security electronic control system malfunctions and use your expertise to maintain, repair, or (for Solutions) install new equipment; commissioning if needed. Interface with the customers: complete the service work documentation, assist them with training instructions needed for future ease-of-use, and (most importantly) recommend system enhancements providing a value-added partner relationship.
DoD SkillBridge: Field Technician (519367) Vets2PMDoD SkillBridge: Field Technician (519367)Baltimore, MarylandMeet with the customers (for Service) to diagnose their HVAC/Building Automation, Fire/Life Safety, or Integrated Security electronic control system malfunctions and use your expertise to maintain, repair, or (for Solutions) install new equipment; commissioning if needed. Interface with the customers: complete the service work documentation, assist them with training instructions needed for future ease-of-use, and (most importantly) recommend system enhancements providing a value-added partner relationship.
Manufacturing Engineering Technician Regal Rexnord CorpManufacturing Engineering TechnicianCambridge, MD$30–$45 / hourThis position is in a manufacturing environment and requires a person to be able to frequently walk, stand, bend, and twist; see, hear, and talk; use fingers and hands, with good hand and finger dexterity to handle or feel controls or products; use hands and arms to reach, hold, and carry product. The Company's end markets benefit from meaningful secular demand tailwinds, and include factory automation, food & beverage, aerospace, medical, data center, warehouse, alternative energy, residential and commercial buildings, general industrial, construction, metals and mining, and agriculture.
CAD/BIM Technician Salas O'BrienCAD/BIM TechnicianBaltimore, MarylandOur specialized experience includes design for data centers, healthcare, science and technology, high-rise buildings, clean energy, education, and other building types as well as structural and building sciences, infrastructure asset management, advanced robotics, and more. The CAD/BIM Technician supports multidisciplinary design teams by producing conceptual sketches, coordinated drawings, and building information models across all phases of design development, from early concept exhibits through construction-ready design documentation.
Engineering Technician ST Engineering North AmericaEngineering TechnicianBaltimore, MD$26.58–$39.23 / hourA pioneer in the production and assembly of complex aerostructures including aircraft and rocket components, engine nacelle systems, thrust reversers and advanced composite products, we apply the latest digital technologies and automation in composite design and manufacturing that are second to none. Who YOU are and what YOU can become: The Engineering Technician will be responsible for specific Composite and Metallic test article and specimen fabrication, including vacuum bagging of samples for testing support or Engineering and Operation Production needs.
IFF Engineering Technician (Navy Combat Systems) BAE Systems PlcIFF Engineering Technician (Navy Combat Systems)MD$28–$43 / hourAbout BAE Systems Intelligence & Security BAE Systems, Inc. is the U.S. subsidiary of BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services. You are just as comfortable in a lab - teaching proper electronic circuit board assembly - as you are in Yokosuka, Japan, leading troubleshooting efforts on a previously unknown and particularly elusive AN/UPX-29(V) IFF system integration problem while under close customer observation.
Engineering Technician 4 Northrop Grumman CorpEngineering Technician 4Elkton, MDAble to read engineering documentation (drawings, models, specs), interpret drawing dimensions, features, and parts lists, develop inspection plans, identify critical features, and choose the appropriate physical inspection methods and equipment to determine compliance of items to design requirements. Minimum of a combined 6 years of continuing education in a related field and/or directly related work experience with quality management systems in an aerospace, mechanical, electrical, and/or propulsion field including support for ISO9001 and/or AS9100 compliance and monitoring.
Construction Materials Testing Technician 2MNextConstruction Materials Testing TechnicianCollege Park, MarylandNon-Exempt 02/10/2023 P OSITION S UMMARY This position involves providing material testing, construction observation from a quality standpoint, and construction inspections on assigned field projects according to the applicable specification for independent testing laboratories. Responsibilities include, but are not limited to, sample preparation, collection & testing, field observations, general inspections, and documentation of construction activities on site pertaining to soil, concrete, grout, mortar, and asphalt.
CAD/BIM Technician Salas O'Brien Engineers IncCAD/BIM TechnicianBaltimore, MD$70,000–$95,000 / yearJob Summary: The CAD/BIM Technician supports multidisciplinary design teams by producing conceptual sketches, coordinated drawings, and building information models across all phases of design development, from early concept exhibits through construction-ready design documentation. Our specialized experience includes design for data centers, healthcare, science and technology, high-rise buildings, clean energy, education, and other building types as well as structural and building sciences, infrastructure asset management, advanced robotics, and more.