Sr. Propulsion Engineer - Thermo-Mechanical Analysis Blue Origin Enterprises LPSr. Propulsion Engineer - Thermo-Mechanical AnalysisHuntsville, AL$145,188–$203,263.20 / yearand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Supply Chain Manager Teledyne Technologies IncSupply Chain ManagerHuntsville, ALJob Overview: The Supply Chain Manager I is an entry-level manager role responsible for managing supplier-related activities across complex programs, ensuring effective supplier performance, material availability, and cost visibility. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research.
Power and Utilities OT Operational Technology-Senior Consultant Deloitte Touche Tohmatsu LtdPower and Utilities OT Operational Technology-Senior ConsultantAL$105,400–$207,800 / yearDemonstrate ability to with identify and address client needs: building solid relationships with clients; developing an awareness of Firm services; communicating with the client in an organized and knowledgeable manner; delivering clear requests for information; demonstrating flexibility in prioritizing and completing tasks; and communicating potential conflicts to the manager. Locations include: Houston, Dallas, Cleveland, Detroit, St. Louis, Pittsburgh, Boston, Charlotte, Atlanta, Miami, Memphis, Denver, Phoenix, Salt Lake City, Los Angeles, San Diego, San Franciso, Seattle.
Power and Utilities OT Operational Technology-Manager Deloitte Touche Tohmatsu LtdPower and Utilities OT Operational Technology-ManagerAL$134,500–$265,100 / yearDemonstrate ability to with identify and address client needs: building solid relationships with clients; developing an awareness of Firm services; communicating with the client in an organized and knowledgeable manner; delivering clear requests for information; demonstrating flexibility in prioritizing and completing tasks; and communicating potential conflicts to the manager. Locations include: Houston, Dallas, Cleveland, Detroit, St. Louis, Pittsburgh, Boston, Charlotte, Atlanta, Miami, Memphis, Denver, Phoenix, Salt Lake City, Los Angeles, San Diego, San Franciso, Seattle.
Technician - Level 2 Sunbelt Rentals IncTechnician - Level 2Madison, AL$21.38–$29.39 / hourThe following is a sample (but not exhaustive) list of the MOS, AFSC, and NEC Codes that may have transferrable skill sets that apply to this role: 711 713 2506 2584 4130 4133 4541 5899 6071 6072 7603 7607 7610 7618 13D 13M 13P 13R 13T 2T311A 2T311C 2T312A 2T312B 2T312C 2T331A 2T331C 2T332A 2T332B 2T332C 2T351 2T351A 2T351C 2T352A 2T352C 62B 63A 63D 63E 63H 63M 63N 63S 63T 63Y 88R 91A 91B 91E 91H 91L 91M 91P 91S ABE ABH AS CM EN GSM MM MM(NUC) MR SB. Related experience may include: Shop Mechanic, Mechanic, Technician, Service Foreman, Service Manager, Shop Manager, Mechanic Supervisor, Technician Supervisor, Lead Mechanic, Lead Technician, Diesel Technician, Diesel Mechanic, Service Technician, Heavy Equipment Mechanic, Hydraulic Technician, Hydraulic Mechanic, ASE Certified Mechanic, IFPS Certified Technician.
Aircraft Mechanic - Avionics and Electrical Technician Tyonek Native CorporationAircraft Mechanic - Avionics and Electrical TechnicianHuntsville, ALFull timeThe Aircraft Electrician is a key member of the maintenance and modification team, responsible for troubleshooting, installing, repairing, and maintaining electrical and avionics systems on rotary-wing and fixed-wing aircraft. When not traveling, the Aircraft Electrician will support various aviation maintenance programs, including routine inspections, troubleshooting, and upgrades on multiple aircraft platforms.
JANITOR (FULL TIME) Compass Group North AmericaJANITOR (FULL TIME)Decatur, AL$14.50–$15 / hourFull-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program. Their portfolio of service categories includes Environment, Health & Safety, Facilities Maintenance & Engineering, Sustainability, Janitorial & Industrial Cleaning, Laboratory Support and Workplace solutions.
GROUNDSKEEPER (FULL TIME) Compass Group North AmericaGROUNDSKEEPER (FULL TIME)DECATUR, AL$15–$15.50 / hourFull-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program. In 2020, ESFM (formerly Eurest Services) won the George Graves Award for Facility Management Achievement from the International Facilities Management Association (IFMA).
NewSHIFT SUPERVISOR (FULL TIME) Compass Group North AmericaSHIFT SUPERVISOR (FULL TIME)DECATUR, AL$20–$24 / hourFull-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program. In 2020, ESFM (formerly Eurest Services) won the George Graves Award for Facility Management Achievement from the International Facilities Management Association (IFMA).
TRASH TECHNICIAN (FULL TIME) Compass Group North AmericaTRASH TECHNICIAN (FULL TIME)Madison, AL$15–$16 / hourFull-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. Pay Range: $15.00 per hour to $16.00 per hour ESFM is the corporate Integrated Facilities Management (IFM) division of Compass Group USA and a Keystone member of the International WELL Building Institute (IWBI).
Technician (Southeast Region) Witt O'Briens LLCTechnician (Southeast Region)ALEngage in strenuous physical activity, including lifting up to 50 lbs, standing for 8-12 hour shifts, bending, crawling, kneeling, climbing ladders, and working from elevated platforms. This candidate should be willing and available to work overtime as needed to meet project demands and deadlines, including extended hours, overtime, various shifts including nights and weekends and holidays when necessary.
Cyber Operational Technology/ Industrial Control Systems (OT/ICS) Senior Consultant Deloitte Touche Tohmatsu LtdCyber Operational Technology/ Industrial Control Systems (OT/ICS) Senior ConsultantALYou will leverage your deep technical expertise, industry knowledge, and hands-on experience with leading OT/ICS security tools to deliver innovative solutions, lead project teams, and provide strategic guidance to clients. 4+ years of demonstrated experience designing and implementing OT/ICS security architectures and controls using tools such as Claroty, Palo Alto, Cradlepoint, CrowdStrike, BeyondTrust PRA, and familiarity with Cisco, ServiceNow, Splunk, and TxOne.
Technician - Test & Launch Blue Origin Enterprises LPTechnician - Test & LaunchHuntsville, ALand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Director, Engine Processing Blue Origin Enterprises LPDirector, Engine ProcessingALand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Senior Mechanical Design Engineer, Test Systems Blue Origin Enterprises LPSenior Mechanical Design Engineer, Test SystemsHuntsville, AL$145,188–$203,263.20 / yearResponsibilities Perform detailed engineering calculations including stress analysis, thermal analysis, and pressure equipment sizing Develop comprehensive technical specifications, design criteria, and engineering drawings Create and maintain code data reports, design documentation, and compliance records Review and approve vendor submissions for code compliance Design pressure vessels, piping systems, and related mechanical components in accordance with applicable codes Serve as the technical authority for code compliance, providing guidance to engineering teams Develop inspection and testing plans that meet requirements Support certification and recertification activities Evaluate non-conformances and develop technically sound resolution strategies Guide manufacturing teams on code-compliant fabrication techniques and requirements Mentor junior engineers on code application and compliance practices Minimum Qualifications Bachelor's degree in Mechanical Engineering or related engineering field 8+ years of mechanical design experience with at least 5 years focused on ASME code-compliant equipment Proficiency in GD&T principles per ASME Y14.5 Experience with engineering calculations for pressure-containing equipment Strong CAD skills with 3D modeling software (SolidWorks, NX, CATIA, or similar) Experience with FEA tools for stress analysis and structural validation Demonstrated ability to interpret and apply code requirements to complex design problems Experience working with quality assurance programs for pressure equipment Knowledge of material selection considerations for various operating conditions Familiarity with NDE methods and acceptance criteria Excellent technical writing and communication skills Strong problem-solving abilities and attention to detail Preferred Qualifications Master's degree in Mechanical Engineering or related field Experience with design and certification of high-pressure or cryogenic systems Background in aerospace, power generation, oil & gas, or process industries Experience with risk-based approaches Familiarity with welding engineering principles and ASME Section IX requirements Experience with fitness-for-service evaluations Knowledge of pressure relief device sizing and selection Experience with pressure testing procedures and test oversight Understanding of design requirements for specific services (hydrogen, oxygen, lethal service) Compensation Range for: WA applicants is $145,188.00 - $203,263.20 and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training.
Propulsion Engineer III (BE-7) Blue Origin Enterprises LPPropulsion Engineer III (BE-7)Huntsville, ALand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Technician - Test & Launch Blue OriginTechnician - Test & LaunchHuntsville, Alabamaand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Risk Manager LinesightRisk ManagerHuntsville, AlabamaEngage with risk owners to develop realistic risk impact assessments, seeking feedback from key subject matter experts’ to ensure any identified risks and mitigation efforts are accurately costed and scheduled . Have experience of using industry risk management tools such as: Primavera Risk Analysis, @Risk, SafranRisk , and familiarity with ARM, Xactium , RiskPredict ! , and tools such as Primavera P6/Microsoft Project .
Facility Design Mechanical Process Pipe Engineer II Blue Origin Enterprises LPFacility Design Mechanical Process Pipe Engineer IIHuntsville, AL$99,201–$138,880.35 / yearand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Sourcing Recruiter (Fixed-Term) EVERGREEN Blue Origin Enterprises LPSourcing Recruiter (Fixed-Term) EVERGREENHuntsville, AL$112,059–$156,882.60 / yearand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Technical Sourcing Recruiter III (EVERGREEN) Blue Origin Enterprises LPTechnical Sourcing Recruiter III (EVERGREEN)Huntsville, AL$134,434–$188,207.25 / yearand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Technical Sourcing Recruiter (fixed-term) Blue Origin Enterprises LPTechnical Sourcing Recruiter (fixed-term)Huntsville, AL$112,059–$156,882.60 / yearand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
NewPropulsion Engineer III - Auxiliary Systems Design Blue OriginPropulsion Engineer III - Auxiliary Systems DesignHuntsville, AL$121,023–$169,432.20 / yearSpecial Mentions Relocation providedTravel expected up to 20% of the timeResponsibilities include but are not limited to: Own the mechanical design of the auxiliary and driveline systems supporting large-scale turbomachinery development and testingResponsible for design and development of shaft couplings, bearing housings and integration, speed‑reduction gear units, bearing fluid lubrication systems, seal support systems, mounting and structural support systems - from concept through hardware implementation and test. Minimum of 5 years of experience in the mechanical design of rotating equipment or drivetrain hardware (couplings, bearings, gear units, shaft systems, or comparable rotating‑machinery mechanical systems).Proficiency in 3D CAD (NX, Creo, or equivalent) and engineering drawing release.
NewSr. Propulsion Engineer - Thermo-Mechanical Analysis Blue OriginSr. Propulsion Engineer - Thermo-Mechanical AnalysisHuntsville, AL$145,188–$203,263.20 / yearMinimum of 8 years of experience in mechanical / structural / thermal analysis of rotating machinery or comparable high‑performance hardware (or fewer years with demonstrated ownership of a whole‑engine / 2D axisymmetric thermo‑mechanical model).Hands‑on experience with transient thermal and nonlinear structural finite element analysis in ANSYS (contact, plasticity, thermal‑structural coupling).Demonstrated experience building (not just running) whole‑engine / 2D axisymmetric thermo‑mechanical models of rotating equipment. and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training.
NewPropulsion Engineer III (BE-7) Blue OriginPropulsion Engineer III (BE-7)Huntsville, ALand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training.* You will drive design for manufacturability improvements and update assembly procedures for our flight engines identified through root cause analyses, engine manufacturing, testing, and cost reduction opportunities.
Facility Design Mechanical Process Pipe Engineer II Blue OriginFacility Design Mechanical Process Pipe Engineer IIHuntsville, Floridaand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Foundations Project Engineer Kiewit CorpFoundations Project EngineerALWe offer our full-time staff employees a comprehensive benefits package thats among the best in our industry, including top-tier medical, dental, and vision plans covering eligible employees and dependents, voluntary wellness and employee assistance programs, life insurance, disability, retirement plans with matching, and generous paid time off. As a Project Engineer, you will be responsible for constructing a projects administrative and technical aspects, managing a team of field and cost engineers.
NewBusiness Development Manager Linde CorporateBusiness Development ManagerHuntsville, ALYou will target customers within chemicals & refining, energy & bio-industrials, and food & beverage industries while managing a territory ideally based in Northern GA, Northern AL, or Eastern TN.Additionally, drive territory growth by prospecting, generating and qualifying leads, developing market strategies, building business cases, supporting proposals and pricing, and overseeing project implementation and startup. Business Development ManagerLocation: Alabama, Georgia, or Tennessee, United StatesPosition ID: req29978What you will enjoy doingYou will identify, develop, and close new business opportunities by partnering with regional sales teams and leveraging technical expertise across Linde's food technologies portfolio.
Electrical Test Technician Southern Staffing GroupElectrical Test TechnicianHuntsville, AlabamaWork spans the country: Alabama, Georgia, Tennessee, Indiana, upstate New York, California, and Florida, with a heavy Southeast core and project work in renewables, data centers, and industrial sites. The company has been in business for more than 60 years, including support work on the Apollo space program, and continues to serve a blue-chip client base across data centers, utilities, industrial plants, and renewables.
Electrical Test Technician-Kelly Southern Staffing GroupElectrical Test Technician-KellyHuntsville, AlabamaWork spans the country: Alabama, Georgia, Tennessee, Indiana, upstate New York, California, and Florida, with a heavy Southeast core and project work in renewables, data centers, and industrial sites. The company has been in business for more than 60 years, including support work on the Apollo space program, and continues to serve a blue-chip client base across data centers, utilities, industrial plants, and renewables.
Software Development Manager Teledyne Technologies IncSoftware Development ManagerHuntsville, ALAs we evolve our codebase from a monolithic architecture to a more modular, microservices-based approach using containers, and shift our focus from traditional app-centric solutions to modern web-centric applications, youll play a pivotal role in guiding this transition. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research.
CNC Machinist 1 Teledyne Technologies IncCNC Machinist 1Huntsville, ALOperate CNC machine on routine and repetitive manufacturing of large production runs, making minor initial set-ups, and necessary adjustments during operation where care is essential to achieve close tolerances or where changes in product are relatively frequent. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research.
Electrical Design Engineer 3 Teledyne Technologies IncElectrical Design Engineer 3Huntsville, ALThese markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. Ability to utilize Electrical Analysis packages such as ETAP (or SKM) to perform load flow, short circuit, harmonic analysis, motor starting, AC and DC Arc Flash studies and protection/ coordination studies for low voltage systems of moderate complexity.
Mechanical Systems Engineer Teledyne Technologies IncMechanical Systems EngineerHuntsville, ALThe role also includes preparing technical presentations; conducting system requirements reviews, design reviews, manufacturing readiness reviews, and test readiness reviews; and briefing customers, senior and mid‑level leadership, and cross‑functional stakeholders. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research.
Accountant 3 Teledyne Technologies IncAccountant 3Huntsville, ALThese markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. Safety and Security - Observes safety and security procedures including using Personal Protective Equipment (PPE) as required and wearing company issued badge when on company property; Reports potentially unsafe conditions; Uses equipment and materials properly.
Accountant 3, Billings Teledyne Technologies IncAccountant 3, BillingsHuntsville, ALThese markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. To perform the job successfully, an individual should demonstrate the following competencies: Problem Solving - Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Works well in group problem solving situations.
Systems Engineer Teledyne Technologies IncSystems EngineerHuntsville, ALThese markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. Work effectively with the NASA customer, users, and commercial and international partners to capture and negotiate requirements, user stories and operations concepts and then drive those change requests through the systems engineering lifecycle.
ServiceNow Developer Teledyne Technologies IncServiceNow DeveloperHuntsville, ALIn Huntsville, Alabama-the Rocket City and heart of NASAs Marshall Space Flight Center-youll work hands-on with the ServiceNow platform to design, develop, configure, and implement solutions focused on ITSM (IT Service Management), ITOM (IT Operations Management), and SPM (Strategic Portfolio Management) modules. This multi-year contract (8.5 years, initiated January 2023) offers the chance to drive transformative IT service capabilities in a mission-critical aerospace environment, collaborating with diverse teams to deliver innovative, reliable solutions that align with organizational goals and enable groundbreaking space exploration.
Senior Cost Control Analyst Teledyne Technologies IncSenior Cost Control AnalystHuntsville, ALThese markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research.?. Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability.
Sr. Manager, Data Reporting & Analytics Teledyne Technologies IncSr. Manager, Data Reporting & AnalyticsHuntsville, AL$83,400–$111,200 / yearThese markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. This role combines strong people leadership, deep technical expertise in Power BI and Microsoft Fabric, and enterprise-level coordination across business, ERP, and data platform teams.
Senior Director, Space Mission Systems Teledyne Technologies IncSenior Director, Space Mission SystemsHuntsville, ALRequirements: Bachelor's degree in business discipline for administrative/sales/finance/supply chain related positions desired experience in a technical discipline for production/quality and engineering/sales engineering related positions and a minimum of 15 years of directly related operations experience and/or training; or equivalent combination of education and experience. Establishes operational objectives and directs subordinates to achieve assignments by providing leadership, assigning tasks, and checking work at appropriate intervals to determine status of assigned projects and ensure goals are met within organization goals of budget, time requirements and high level of quality.
Chief Engineer Teledyne Technologies IncChief EngineerHuntsville, ALThese markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. Knowledge and associated ability to apply technical, scientific and mathematical knowledge to design and implement materials, structures, machines, devices, systems and processes that safely realize a desired objective or invention.
CNC Machinist 4 Teledyne Technologies IncCNC Machinist 4Huntsville, ALThese markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. Determine own work procedure of assigned number of pieces, types of metal, types of machines, tools and attachments, speeds and feeds, tolerances and sequences of operations.
MOSSI Cost Analyst Teledyne Technologies IncMOSSI Cost AnalystHuntsville, ALThese markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability.
Enterprise Manufacturing Applications Analyst Teledyne Technologies IncEnterprise Manufacturing Applications AnalystAL$103,900–$138,500 / yearJob Summary: The Enterprise Manufacturing Applications Analyst is responsible for implementing, supporting, enhancing, optimizing, and maintaining our Manufacturing Execution Systems (Factory Logix, Solumina, Siemens, etc.), TIPQA Enterprise Quality Assurance System, and/or Product Lifecycle Management Systems (Windchill, Siemens, Arena, etc.). These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research.
Avionics Engineer Lead Teledyne Technologies IncAvionics Engineer LeadHuntsville, ALExperience in one or more of the following key specialty areas: electrical engineering, systems engineering, systems integration, missiles, targets, flight tests, modeling and simulations, reentry vehicles, space vehicles, rocket motors and thrusters, specialty engineering, or threat systems. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research.
Information Systems Security Engineer Teledyne Technologies IncInformation Systems Security EngineerHuntsville, ALEnsure the confidentiality, integrity and availability of unclassified information systems including FISMA Moderate and potentially FISMA High impact levels, as well as systems designated as High Value Assets (HVAs) under DHS Binding Operational Directive (BOD) 18-02. Desired Qualifications: Prior experience within NASA cybersecurity systems and processes is a significant plus - including NASA's A&A process, the RICS system, NASA-specific overlays, organization-defined values (ODV), and coordination with Center CISOs, CSRMs, and Authorizing Officials.
IT SOX ERP Compliance Specialist Teledyne Technologies IncIT SOX ERP Compliance SpecialistHuntsville, AL$62,800–$83,700 / yearThese markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. Actual compensation for successful candidates is carefully determined based on several factors including, but not limited to, location, local regulations (such as minimum wage), education/training, work experience, key skills, and type of position.
NewIT Technical Specialist Intern Teledyne Technologies IncIT Technical Specialist InternHuntsville, ALThese markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. You'll work alongside an experienced IT team, assisting end users, resolving common technical issues, and learning how enterprise systems function.
NewMechanical Designer/Drafter Teledyne Technologies IncMechanical Designer/DrafterHuntsville, ALThese markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. To perform the job successfully, an individual should demonstrate the following competencies: Oral/Written Communication - Listens and gets clarification; Responds well to questions; Records data; Writes clearly and informatively; Able to read and interpret written information.