Control Room Operator -Power Plant Technician Luminant Power LLCControl Room Operator -Power Plant TechnicianMilford, CTFull timeEducation, Experience, and Skill Requirements: •4 -6 years related experience •Satisfactory completion of Tier 2 within primary skill for position job performance measure•Minimum of High School diploma or GED equivalent•Demonstrate computer based skills•Demonstrate effective oral & verbal communications skills•Independent knowledge of troubleshootingKey Metrics: •Satisfactory completion of Tier 3 training and qualification requirements•Demonstrate continual self improvement in job skills and knowledge.•This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Ensures strict adherence to safety, health and environmental procedures as they relate to plant operations and maintenance including but not limited to Lockout Tagout, Job Safety Analysis, Confined Space, Hot Work, Electrical Safety and PPE.
Lead Plant Operator (Shift Supervisor) Gables Search GroupLead Plant Operator (Shift Supervisor)Bridgeport, CT$56–$61Operate and review all operational data, readings, log-sheets, water testing/analyses (chemistry) and take appropriate action to ensure equipment and systems are operating within expected ranges, conditions and overall optimization needed for meeting plant specifications and expectations. ·Promote and provide a safe and healthy work environment for employees, contractors, and visitors, including the adherence to and effective use of various personal protective equipment, programs, policies and procedures as developed and required by the company.
Plant Operator / HVAC / Maintenance Yale New Haven HealthPlant Operator / HVAC / MaintenanceGreenwich, CTTrade school graduate or completion of an approved trade apprenticeship program in commercial heating / ventilation / air conditioning and building management controls. Assists in the installation, operation, maintenance and repair of all mechanical, heating, refrigeration and air-conditioning systems, equipment and related facilities.
Plant Operator - HVAC / Maintenance Yale New Haven HealthPlant Operator - HVAC / MaintenanceGreenwich, ConnecticutTrade school graduate or completion of an approved trade apprenticeship program in commercial heating / ventilation / air conditioning and building management controls. Assists in the installation, operation, maintenance and repair of all mechanical, heating, refrigeration and air-conditioning systems, equipment and related facilities.
Plant Foreman Town of VernonPlant ForemanCTExperience & Training: Graduation from high school, high school equivalency diploma (GED) or trade school graduate, or equivalent combination of education and training that involves completion of vocational training program in wastewater treatment technology and four years of experience, at least two of which must be of lead operational or plant maintenance supervisory experience. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, feel or operate objects, tools or controls and reach with hands and arms, talk or hear.
Power Grid Operations Associate ISO New England IncPower Grid Operations AssociateWindsor, CTAssociates must successfully complete an intensive eight‑month System Operator Initial Training (SOIT) program and test for and earn a NERC Reliability Coordinator certification. No direct industry experience is required, though applicants with technical training and/or experience in an electrical utility, power systems training, U.S. Navy nuclear, and/or power plant are encouraged to apply.
HVAC/boiler Operator Yale New Haven HealthHVAC/boiler OperatorGreenwich, CTTrade school graduate or completion of an approved trade apprenticeship program in commercial heating / ventilation / air conditioning and building management controls. Assists in the installation, operation, maintenance and repair of all mechanical, heating, refrigeration and air-conditioning systems, equipment and related facilities.
HVAC / Boiler Operator Yale New Haven HealthHVAC / Boiler OperatorGreenwich, ConnecticutTrade school graduate or completion of an approved trade apprenticeship program in commercial heating / ventilation / air conditioning and building management controls. Assists in the installation, operation, maintenance and repair of all mechanical, heating, refrigeration and air-conditioning systems, equipment and related facilities.
Auxiliary Operator Reworld ProjectsAuxiliary OperatorUsa, ConnecticutAll Reworld positions require a candidate's ability to perform the duties and responsibilities of the role while upholding Reworld's Values, including (but not limited to) contributing to a safe and inclusive workplace, delivering results through trust, and building breakthrough capabilities. As an Auxiliary Operator, you will work in collaboration with our facility control room to operate and inspect various power plant systems safely and efficiently to ensure the operational effectiveness of Reworld’s industrial disposal process.
Sr. Powerhouse Equipment Operator Lockheed Martin CorpSr. Powerhouse Equipment OperatorStratford, CTDescription:Operate, start up, shut down, and maintain high pressure boilers, chillers, air compressors and auxiliary equipment throughout the Central Plant to supply heat, hot water, steam, compressed air, and chilled water to the Stratford plant facilities. Must make critical operational decisions regarding the import or export of electrical power and independently diagnose and resolve equipment or process issues observed in the control room or during rounds, ensuring reliable and safe plant operation.
Control Room Operator Lead Amentum Services IncControl Room Operator LeadCTOversee the operation and monitoring of three dual-fuel 600 psig industrial steam boilers, a Gas Turbine with Waste Heat Recovery Steam Generator (WHRSG), power generation and distribution systems, nitrogen distribution, condensate return systems, and all associated auxiliary equipment using the Delta V DCS platform. Experience working with heavy industrial or manufacturing plant steam systems, centrifugal chillers, air handling units, cooling towers, air compressors, air dryers, heat exchangers, exhaust systems, pneumatic controls, and building automation control systems.
Auxiliary Operator Reworld Holding CorpAuxiliary OperatorCT$66,000–$87,900 / yearAs an Auxiliary Operator, you will work in collaboration with our facility control room to operate and inspect various power plant systems safely and efficiently to ensure the operational effectiveness of Reworlds industrial disposal process. All Reworld positions require a candidate's ability to perform the duties and responsibilities of the role while upholding Reworld's Values, including (but not limited to) contributing to a safe and inclusive workplace, delivering results through trust, and building breakthrough capabilities.
Thermal Operator- Control Room Operator Ahlstrom Holding 3 OyThermal Operator- Control Room OperatorWindsor Locks, CTWork closely with assigned personnel to ensure that all shift responsibilities including the assigned Preventative Maintenance tasks and planned activities per the shift orders are completed as scheduled. Assist as required in solving complex operating and maintenance problems and must be capable of rapid decision making in emergency situations, such as unplanned equipment outages/failures.
Process Operator I FuelCell Energy IncProcess Operator ITorrington, CTOur mission and purpose remains to utilize our proprietary, state-of-the- art fuel cell power plants to reduce the global environmental footprint of baseload power generation by providing environmentally responsible solutions for reliable electrical power, hot water, steam, chilling, hydrogen, microgrid applications, and carbon capture and, in so doing, drive demand for our products and services, thus realizing positive stockholder returns. We provide solutions for various applications, including utility-scale distributed generation, on-site power generation and combined heat and power, with the differentiating ability to do so utilizing multiple sources of fuel including natural gas, Renewable Biogas (i.e., landfill gas, anaerobic digester gas), propane and various blends of such fuels.
Process Operator I (Second Shift) FuelCell Energy IncProcess Operator I (Second Shift)Torrington, CTOur mission and purpose remains to utilize our proprietary, state-of-the- art fuel cell power plants to reduce the global environmental footprint of baseload power generation by providing environmentally responsible solutions for reliable electrical power, hot water, steam, chilling, hydrogen, microgrid applications, and carbon capture and, in so doing, drive demand for our products and services, thus realizing positive stockholder returns. We provide solutions for various applications, including utility-scale distributed generation, on-site power generation and combined heat and power, with the differentiating ability to do so utilizing multiple sources of fuel including natural gas, Renewable Biogas (i.e., landfill gas, anaerobic digester gas), propane and various blends of such fuels.
Heavy Equipment Operator F & G RecyclingHeavy Equipment OperatorEast Windsor, CTFull timeHeavy Equipment Operators are responsible for the safe operation and control of a wide range of machinery, including excavators, loaders, bulldozers, skid steers, landfill compactors, sweepers, forklifts, and track mobiles. Safely and effectively operate heavy equipment to maintain productivity in the effective operation of the transfer starting or material recovery facility during daily operations.
Regeneration Operator III (Lead) - Water Technologies Veolia Environnement SARegeneration Operator III (Lead) - Water TechnologiesEast Hartford, CT$28.91–$31.26 / hourDemonstrate full comprehensive understanding and execution of facility operations including dock operations, wastewater management, water balancing, quality control procedures, and resin regeneration processes • Proficiency in Microsoft Suite or Google Workspaces • Advanced knowledge of SAP • Frontline leadership/supervisor skills • Strong Communication • Mechanical and Technical Aptitude • Strong understanding of Ion Exchange water treatment technology • Safety Tools and Systems (Gensuite, LOTO, permitting, emergency response plan) • Preferred: Operate Forklift as needed • Certification in basic Field Training course. • Night Shift from 10pm to 6am (with some flexibility) • Must be available on weekends • Ability and willingness to work in various weather conditions (indoor / outdoor) • Ability and willingness to perform physical duties such as lifting to 50 pounds, climbing, working at elevated heights, and manual dexterity • Ability and willingness to work in industrial facilities, manufacturing facilities, and power industry facilities • Ability and willingness to travel for installation and repair if needed • Ability and willingness to work holidays and weekends based on business demand • Ability to coach, mentor, and train new employees • Lead a team in an industrial environment.
Copperbond Operator (3rd Shift) Chase Brass and Copper Co LLCCopperbond Operator (3rd Shift)Waterbury, CT$29.30–$34.14 / hourThe final pay offered to a successful candidate will be based upon various factors unique to each individual that may include, but are not limited to, years of experience, industry knowledge, technical skills, education, qualifications, etc. Sustainability- Wieland continues to break ground with eco-friendly solutions and push the barrier in sustainability for future generations.
2nd Shift Rolling Operator Chase Brass and Copper Co LLC2nd Shift Rolling OperatorWaterbury, CT$30.20–$32.20 / hourThe final pay offered to a successful candidate will be based upon various factors unique to each individual that may include, but are not limited to, years of experience, industry knowledge, technical skills, education, qualifications, etc. The Rolling Operator will be responsible for safely and efficiently operating the Sendzimir Z-mills while continually monitoring the material and the machine parameters to assure compliance with specifications.
Operator Aquarion Water CompanyOperatorShelton, CTLicense & Certifications: Shall obtain a CT Class I Water Treatment Operator Certification within 24 months; then shall obtain a CT Class II Water Treatment Operator Certification within 36 months; then shall obtain a CT Class IV Water Treatment Operator Certification within 60 months (if applicable). The requirements of the position include: Maintain, operate, and adjust treatment plant pumps, motors, chemical feed systems and other equipment under direction of senior operating staff to assure optimum system performance.
NewHighway Maintenance Operator I Department of TransportationHighway Maintenance Operator INew London, ConnecticutKNOWLEDGE, SKILLS AND CAPACITIES: A thorough knowledge of the state laws pertaining to the operation of motor vehicles on the highway; skill in the operation and servicing of motor equipment including heavy diesel and gasoline motor equipment; the ability to operate dump trucks, snow plows, basin cleaners, large power mowers and a variety of other motor vehicles used in construction and maintenance of state highways; the ability to make emergency running repairs and mechanical adjustments to equipment; the ability to operate a variety of power hand tools; the ability to readily understand and carry out oral and written directions; the ability to work outdoors during inclement weather and be on call during emergency situations; the ability to lift and load material; the ability to operate and use the tools required in highway maintenance work including pneumatic hammers; the ability to drive vehicles in a safe and conscientious manner; skill in the operation of specialized equipment which requires hand, foot, and eye coordination; some duties may require the use of protective equipment such as respirators, safety goggles, etc. and related capacities and abilities. GENERAL STATEMENT OF DUTIES: Within the Department of Transportation (DOT), to perform physical labor and the skilled operation of a variety of self-propelled mobile and other equipment used in the maintenance and repair of highway pavements, shoulders, roadsides, and drainage, signage, and in the control of snow and ice; may be assigned a variety of maintenance tasks in support of bridge, traffic, roadside, pavement markings and facility maintenance programs; may also perform preventive maintenance on assigned equipment; and performs related work as required.
Fuel Yard Operator NAES CorporationFuel Yard OperatorPlainfield, CT$27–$34.48 / hourPart timeThe Fuel Yard Operator at Plainfield Renewable Energy plays a vital role in supporting daily plant operations by operating heavy equipment, monitoring systems, performing light maintenance, and ensuring safe and efficient plant performance. Physical demands include standing for extended periods of time, climbing multiple levels of stairs, climbing ladders over 50 feet in height, entering and exiting equipment cabs, traversing uneven or elevated surfaces, and working inside confined spaces.
NewHIGHWAY MAINTENANCE OPERATOR I State of Rhode IslandHIGHWAY MAINTENANCE OPERATOR INew London, CT$57,873–$66,196 / yearREQUIRED QUALIFICATIONS FOR APPOINTMENT: KNOWLEDGE, SKILLS AND CAPACITIES: A thorough knowledge of the state laws pertaining to the operation of motor vehicles on the highway; skill in the operation and servicing of motor equipment including heavy diesel and gasoline motor equipment; the ability to operate dump trucks, snow plows, basin cleaners, large power mowers and a variety of other motor vehicles used in construction and maintenance of state highways; the ability to make emergency running repairs and mechanical adjustments to equipment; the ability to operate a variety of power hand tools; the ability to readily understand and carry out oral and written directions; the ability to work outdoors during inclement weather and be on call during emergency situations; the ability to lift and load material; the ability to operate and use the tools required in highway maintenance work including pneumatic hammers; the ability to drive vehicles in a safe and conscientious manner; skill in the operation of specialized equipment which requires hand, foot, and eye coordination; some duties may require the use of protective equipment such as respirators, safety goggles, etc. and related capacities and abilities. ILLUSTRATIVE EXAMPLES OF WORK PERFORMED: Within the Department of Transportation (DOT), to perform physical labor and the skilled operation of selfpropelled mobile and other equipment used in the maintenance and repair of highway pavements, shoulders, roadsides, and drainage, signage, and in the control of snow and ice; may be assigned a variety of maintenance tasks in support of bridge, traffic, roadside, pavement markings and facility maintenance programs; and may also perform preventive maintenance on assigned equipment; and related work as required.
Copperbond Operator (3rd Shift) WielandCopperbond Operator (3rd Shift)Waterbury, Connecticut$29.30–$34.14 / hourThe final pay offered to a successful candidate will be based upon various factors unique to each individual that may include, but are not limited to, years of experience, industry knowledge, technical skills, education, qualifications, etc. Sustainability - Wieland continues to break ground with eco-friendly solutions and push the barrier in sustainability for future generations .
2nd Shift Rolling Operator Wieland2nd Shift Rolling OperatorWaterbury, Connecticut$30.20–$32.20 / hourThe final pay offered to a successful candidate will be based upon various factors unique to each individual that may include, but are not limited to, years of experience, industry knowledge, technical skills, education, qualifications, etc. The Rolling Operator will be responsible for safely and efficiently operating the Sendzimir Z-mills while continually monitoring the material and the machine parameters to assure compliance with specifications.
SAW OPERATOR 48forty SolutionsSAW OPERATORCTAs a Saw Shop Operator, you'll get to setup our builders for success by setting up and operating power saws to slot, cut, and trim wood for pallet creation! We are truly Pallet Management Made Simple, our workforce is the heart and soul of our business, and we're looking for our next Saw Shop Operator to join our team!
Die Setter/Press Operator Coyote Technical & Executive SourcingDie Setter/Press OperatorDanbury, CTDirector of SourcingDie Setter/Press Operator - Danbury, CT#PressOperator#BrakePress#Stamping#MetalStamping#StampedMetal#DieSetter#Manufacturing#Connecticut#Danbury#Jobs#Hiring *Works with toolmakers to troubleshoot stamping problems related to slug pulling, misdeeds, scrap build up and segregation, part ejection, and product dimensional nonconformance.
Field Service Technician - Bridgeport, CT FuelCell Energy IncField Service Technician - Bridgeport, CTBridgeport, CT$30–$38 / hourUS Navy Nuclear Power Plant Operator, Electronics Technician, Gas Turbine Operator, Electrical Technician GSE, and Mechanical Technician GSM.) • HVAC or Electrician certification experience (i.e. HVAC technician, electrician, electronics technician, field service technician, etc.) • Power Plant operations and Maintenance experience. • Other physical activities include standing for extended periods, pushing, pulling, and bending into awkward positions to work in small areas where there may be confined space • Must be able to troubleshoot company product using visual and audible skills to accurately diagnose problems and ensure product is in working order.
Mechanical Maintenance Technician NAES CorporationMechanical Maintenance TechnicianPlainfield, CT$35–$45 / hourPart timeIn-depth understanding of biomass plant operations and fuel handling systems, with demonstrated ability to perform preventive, corrective, and predictive maintenance on mechanical and balance-of-plant equipment including conveyors, feeders, fans, pumps, valves, air compressors, ash handling systems, and steam turbines. The technician performs preventive, corrective, and predictive maintenance on mechanical equipment, focusing on biomass systems such as fuel handling conveyors, wood-fired boilers, ash handling systems, and the steam turbine.
NewMaintenance Technician Gables Search GroupMaintenance TechnicianBridgeport, CTPerforms a variety of maintenance activities including but not limited to, the use of basic hand tools, machining, welding pipefitting and tubing functions, equipment and test equipment, calibration and alignment equipment, inspection testing, testing/troubleshooting/repairing mechanical, electrical and electronic equipment, as well as lubrication as required. The Maintenance Technician is accountable for maintaining and repairing all types of power plant and steam distribution equipment including, plant mechanical, electrical and electronic equipment, instrumentation and controls equipment, installation and calibration of equipment,buildings, grounds and vehicles at the site.
Senior SCADA Engineer FuelCell Energy IncSenior SCADA EngineerDanbury, CT$115,000–$127,500 / yearResumes submitted to any FuelCell Energy employee without a current, signed and valid contract in place with the FuelCell Energy Recruiting team for this position will become the property of FuelCell Energy and no agency fees will be paid. As an innovator and manufacturer of fuel cell clean power platforms, FuelCell Energy has the only technology in the world capable of capturing carbon from an external source and producing power at the same time.
Principal Engineer, SCADA Engineering (BESS) Invenergy LLCPrincipal Engineer, SCADA Engineering (BESS)CT$155,000–$180,000 / yearThis role is accountable for defining and documenting control strategies and data interfaces between substation devices, generation resources, data centers, remote operation centers, and external entities, and for driving reliable data connectivity and control readiness from design, commissioning, and turnover. Monitor construction progress remotely and via on site visits, support resolution of field issues, attend in person meetings with stakeholders, and provide on-site programming and field support during commissioning when required.
NewDesign Engineer Job JunctureDesign EngineerNew Haven, CTOur customers, located primarily in NY, NJ and New England, include hospitals, universities, institutions, utilities and major manufacturers with central high pressure steam or high temperature hot water generating facilities that are used to support their manufacturing processes, heating or power generation requirements. This effort may require regional travel and typically involves factory testing of the control cabinets, supervision of the installation effort, troubleshooting, calibration, loop testing, safety limit testing and combustion testing in conjunction with our field service engineers.
Mechanical Assembler I (Second Shift) FuelCell Energy IncMechanical Assembler I (Second Shift)Torrington, CTOur mission and purpose remains to utilize our proprietary, state-of-the- art fuel cell power plants to reduce the global environmental footprint of baseload power generation by providing environmentally responsible solutions for reliable electrical power, hot water, steam, chilling, hydrogen, microgrid applications, and carbon capture and, in so doing, drive demand for our products and services, thus realizing positive stockholder returns. We provide solutions for various applications, including utility-scale distributed generation, on-site power generation and combined heat and power, with the differentiating ability to do so utilizing multiple sources of fuel including natural gas, Renewable Biogas (i.e., landfill gas, anaerobic digester gas), propane and various blends of such fuels.
Senior SCADA Engineer, EPC (Remote) SOLV Energy LLCSenior SCADA Engineer, EPC (Remote)CTRemote$125,114–$166,402 / yearIn addition, candidate introductions or resumes can only be submitted to our internal talent acquisition recruiting team if a signed vendor agreement is already on file and the third-party recruiter or agency has received formal instructions from our internal talent acquisition team to submit candidates for a particular job posting. Own end-to-end PPC implementation on assigned projects, including programming, hardware/software integration, factory acceptance testing, and site acceptance testing to meet ISO, utility, and customer requirements.
Director, Supply Chain - Manchester, NH Hubbell IncDirector, Supply Chain - Manchester, NHShelton, CTThe Director of Supply Chain for the Industrial SBU is responsible for leading the execution of sourcing and purchasing operations, ensuring consistent supplier performance, reliable material availability, and seamless alignment with demand and supply planning. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications.