NewPower Plant Operator Luminant Power LLCPower Plant OperatorBellingham, MAFull timeEnsures strict adherence to safety, health and environmental procedures as they relate to plant operations and maintenance including but not limited to Lockout Tagout, Job Safety Analysis, Confined Space, Hot Work, Electrical Safety and PPE. This position is responsible for performing operations functions, preventive and corrective maintenance as applicable to job function to ensure proper functioning of plant equipment; will work under the direction of site management.
Control Room Operator/Power Plant Technician VistraControl Room Operator/Power Plant TechnicianBlackstone, MassachusettsMinimum 6 years of related experience •Minimum of a High School diploma or equivalent •Demonstrate effective oral and verbal communications skills •If applicable, candidate will hold the required level of state license as recognized by the governing body of that particular state (MA, OH); • Commonwealth of Massachusetts 2nd Class Engineer’s License preferred All applicants must be a successful candidate on the Plant Operator Selection System/Power Plant Operations and Maintenance (POSS / MASS) program in order to be considered a candidate for this position. Utilize the facilities computerized maintenance management system (CMMS) to document and track the maintenance request / work orders and actions completed on plant equipment and systems.
NewPower Plant Technician - Operator VistraPower Plant Technician - OperatorDayville, ConnecticutEnsures strict adherence to safety, health and environmental procedures as they relate to plant operations and maintenance including but not limited to Lockout Tagout, Job Safety Analysis, Confined Space, Hot Work, Electrical Safety and PPE. This position is responsible for performing operations functions, preventive and corrective maintenance as applicable to job function to ensure proper functioning of plant equipment.
Power Plant Technician/Control Room Operator Vistra CorpPower Plant Technician/Control Room OperatorBlackstone, MA$40–$60 / hourUtilize the facilities computerized maintenance management system (CMMS) to document and track the maintenance request / work orders and actions completed on plant equipment and systems. If applicable, candidate will hold the required level of state license as recognized by the governing body of that particular state (MA, OH); Commonwealth of Massachusetts 2nd Class Engineer's License preferred.
Power Plant Technician - Operator Luminant Power LLCPower Plant Technician - OperatorDayville, CTFull timeEnsures strict adherence to safety, health and environmental procedures as they relate to plant operations and maintenance including but not limited to Lockout Tagout, Job Safety Analysis, Confined Space, Hot Work, Electrical Safety and PPE. This position is responsible for performing operations functions, preventive and corrective maintenance as applicable to job function to ensure proper functioning of plant equipment.
Power Plant Maintenance Technician - Instrumentation, Controls and Electrical (IC&E) VistraPower Plant Maintenance Technician - Instrumentation, Controls and Electrical (IC&E)Bellingham, MassachusettsInspect, repair, install and remove various types of motors, generators, transformers, switches, circuit breakers, motor control equipment, cabling, buswork and storage batteries, and work with electrical systems up to and including 4160 volts. To maintain the instrumentation, control, electrical and mechanical systems of a 2 unit GT24 Combined Cycle plant to meet the specific energy generation requirements of the Vistra system in a safe, reliable, efficient, and environmentally sound manner.
Power Plant Maintenance Technician - Instrumentation, Controls and Electrical (IC&E) Vistra CorpPower Plant Maintenance Technician - Instrumentation, Controls and Electrical (IC&E)Blackstone, MA$40–$50 / hourInspect, repair, install and remove various types of motors, generators, transformers, switches, circuit breakers, motor control equipment, cabling, buswork and storage batteries, and work with electrical systems up to and including 4160 volts. To maintain the instrumentation, control, electrical and mechanical systems of a 2 unit GT24 Combined Cycle plant to meet the specific energy generation requirements of the Vistra system in a safe, reliable, efficient, and environmentally sound manner.
Loader Operator - Asphalt Plant Riley Brother IncLoader Operator - Asphalt PlantBellingham, MA$30–$35 / hourPart timeWe provide a full suite of engineering, construction, operations, and maintenance services, including repair, replacement, maintenance, and installation of natural gas, telecommunications, and electric infrastructure through our operating subsidiaries: SiteWise, Kelly Cable, Riley Brothers, 5 Star Electric, Superior Hydrovac and Superior Pipeline Services. Provides mid-level laborer functions including hand digging with a shovel, setting up traffic control, entry level equipment operations, placing fiber, loading materials, etc.
Loader Operator - Asphalt Plant Peak Utility Services GroupLoader Operator - Asphalt PlantBellingham, MassachusettsWe provide a full suite of engineering, construction, operations, and maintenance services, including repair, replacement, maintenance, and installation of natural gas, telecommunications, and electric infrastructure through our operating subsidiaries: SiteWise, Kelly Cable, Riley Brothers, 5 Star Electric, Superior Hydrovac and Superior Pipeline Services. Provides mid-level laborer functions including hand digging with a shovel, setting up traffic control, entry level equipment operations, placing fiber, loading materials, etc.
3rd Cl Power Plant Eng - CoGen Commonwealth of Massachusetts3rd Cl Power Plant Eng - CoGenCanton, MA3rd Cl Power Plant Eng - CoGen'',''3rd Cl Power Plant Eng - CoGen'',''United States-Massachusetts-Canton-3 Randolph Street'',''United States-Massachusetts-Canton-3 Randolph Street'',''Equipment, Facilities & Services'',''Equipment, Facilities & Services'',''Department of Public Health'',''Department of Public Health'',''Full-time'',''Full-time'',''Day'',''Day'',''Sep 4, 2026, 10:10:39 AM'',''Sep 4, 2026, 10:10:39 AM'',''1'',''1'',''100,064.64'',''70,870.54'',''100,064.64'',''Yearly'',''Sandra Semedo: sandra.c.semedo@mass.gov'',''Sandra This position operates, maintains, and/or repairs high pressure boilers and auxiliary machinery and equipment; cleans machinery and equipment; responds to emergencies or equipment breakdowns; maintains adequate supply of fuel; and performs other job-related duties as assigned by supervisor.
Plant Technician 3 Vistra CorpPlant Technician 3CTEnsures strict adherence to safety, health and environmental procedures as they relate to plant operations and maintenance including but not limited to Lockout Tagout, Job Safety Analysis, Confined Space, Hot Work, Electrical Safety and PPE. This position is responsible for performing operations functions, preventive and corrective maintenance as applicable to job function to ensure proper functioning of plant equipment.
Control Room Operator (CRO) NAESControl Room Operator (CRO)Plainfield, ConnecticutStrong knowledge of boilers, steam turbines, emissions control systems such as SCR and hot precipitators, and associated auxiliary equipment, with a practical understanding of biomass combustion, steam generation, and heat transfer theory in power plants. Monitor and record critical operational parameters such as pressures, temperatures, fuel consumption, electrical output, steam generation, emissions, and heat rates to ensure equipment runs within prescribed limits.
Building Operator/Stationary Engineer Southcoast Health System, Inc.Building Operator/Stationary EngineerFall River, Massachusetts$27.67–$46.52 / hourFull timeNestled in local communities, Southcoast Health provides inclusive, ethical workplaces where our highly skilled caregivers offer world-class, comprehensive healthcare close to home. Must be fully vaccinated against seasonal Influenza and the COVID 19 virus or to be exempt from the requirement for medical or personal reasons by signing a statement certifying you are choosing to be exempt from vaccination once hired.
Auxiliary Operator NAESAuxiliary OperatorPlainfield, ConnecticutOperate and monitor key auxiliary systems such as biomass fuel conveyors, feed systems, ash handling equipment, air compressors, boiler feedwater systems, and emissions control systems (e.g., baghouse filters, SCR). Physical demands include standing for extended periods, climbing multiple levels of stairs, climbing ladders over 50 feet in height, entering and exiting equipment cabs, traversing uneven or elevated surfaces, and working inside confined spaces.
NewControl Room Operator PrimeCrew SolutionsControl Room OperatorRochester, MAMonitoring air pollution control equipment· Accurately reading and recording data, and reporting equipment malfunctions or trends, which indicate possible equipment danger· Identifying and correcting abnormal operating conditions or emergency situations· Understand and train other Operators on the operating principles of the power facility's systems, components and steam cycles.· Additional duties as assigned to ensure safe and efficient facility operations· To be considered for this position the individual must have a valid Massachusetts Second Class Engineer's license or higher, at least three years previous experience with high pressure boilers and electric generating equipment, or formal technical training and a High School Diploma or equivalent.
Auxiliary Operator Reworld ProjectsAuxiliary OperatorUsa, MassachusettsAll Reworld positions require a candidate's ability to perform the duties and responsibilities of the role while upholding Reworld's Values, including (but not limited to) contributing to a safe and inclusive workplace, delivering results through trust, and building breakthrough capabilities. Position Responsibilities: · Operate and inspect power plant systems in accordance with safety operating procedures, systems include, but are not exclusively limited to boilers, air pollution control systems, ash systems, and heavy industrial equipment.
Control Room Operator Reworld ProjectsControl Room OperatorUsa, MassachusettsControl the operation of systems including steam generation, condensate, feed water, turbine/generator, circulating water, service water, fuel handling, ash handling, electrical, fire protection, air pollution control and various computer networks. To be considered for this position the individual must have a valid Massachusetts Second Class Engineer’s license or higher, at least three years previous experience with high pressure boilers and electric generating equipment, or formal technical training and a High School Diploma or equivalent.
Manufacturing Production Operator Washington MillsManufacturing Production OperatorNorth Grafton, MA$20–$23 / hourPerform basic housekeeping tasks autonomouslyFill, transport, palletize, stack, and organize drums, super sacks, and bags of abrasive grainMonitor production line for evidence of mechanical failure, production contamination, and other hazardsHandle drums, super sacks, and bags of abrasive grain through various methods, including: manually, with powered lift devices, and with motorized pallet jacksUse basic hand tools like wrenches, screw drivers, and malletsPerform other necessary duties and projects as assigned. We proudly offer robust compensation and benefits packages, including: Competitive pay, with opportunities to advanceWorld-class medical and dental plansEmployer-sponsored retirement planCompany-paid life insurancePaid vacation and generous holiday timeFamily-friendly personal leave policies.
CNC Machine Operator - 2nd Shift Taco Family of CompaniesCNC Machine Operator - 2nd ShiftFall River, MassachusettsResponsibilities include but are not limited to: Uses CNC lathes, CNC milling machines, radial drills, vertical turret lathes, a variety of adjustable precision measuring instruments, and various other tools common to the machining trade. Performs routine set-ups on machine tools and make production runs on CNC lathes, radial drills and other production equipment to produce parts for use in the assembly of a variety of products.
Control Room Operator NRG Energy IncControl Room OperatorRIExperience: 5+ years directly related experience including understanding of health and safety regulations, and previous experience working with and around hazardous energy, chemicals and waste materials including knowledge of safe handling, storage, and transport. This position will require a good working experience with the use of Distributive Control System (DCS) computers to operate plant equipment and for monitoring of equipment to measure, record and make adjustments within operating parameters.