ACA Truck LeasingNewOTR Lease Operator ACA Truck LeasingOTR Lease OperatorWoodhaven, MISee Advantage AI Privacy Policy at https://www.advantage.ai/legal/privacy-policy and SonicJobs Privacy Policy at https://www.sonicjobs.com/us/privacy-policy and Terms of Use at https://www.sonicjobs.com/us/terms-conditions. Primarily Midwest and Southern Region, average 2500 miles per week.
MedxcelNewPowerplant Operator III Licensed MedxcelPowerplant Operator III LicensedDetroit, MichiganThe Power Plant Operator III makes periodic inspections of equipment and minor repairs to such equipment; perform preventive maintenance; take responsible charge of a watch, read meters, gauges, and other recording devices and log the data; keep records and write reports; as directed, inspect low and/or high-pressure boilers in accordance with a unified inspection procedure. They operate, maintain and adjust high and/or low-pressure boilers, furnaces, engines, pumps, heat exchangers, generators, motors, chillers, cooling towers, equipment for heating, ventilating, air conditioning, lighting and associated equipment in the facilities.
Wayne Regional Educational Service AgencyPlant Engineer Class C Wayne Regional Educational Service AgencyPlant Engineer Class Cdetroit, MIResponsible for the operation, general maintenance and repair of the following: HVAC system Lighting (indoor and outdoor) Plumbing Custodial equipment Grounds equipment Furniture Physical structure Miscellaneous Maintain designated areas of the grounds, including: Cutting/whipping/edging grass Weed control Trimming of trees and shrubs Removal of debris Snow removal Salt application Miscellaneous Perform custodial tasks: Daily cleaning of designated areas Setup and cleanup of lunch program Monitor restroom cleanliness Respond to random cleanups Miscellaneous Coordinate with District maintenance groups to assure the proper completion of tasks. Plant Engineer Class C JobID: 1185 Position Type: Maintenance/Custodial/Plant Engineer Class C Elementary SchoolDate Posted: 3/17/2025Location: TBA Closing Date: Until FilledDistrict: Plymouth-Canton Community Schools Additional Information: Show/HidePOSITION: Plant Engineer Class C LOCATION: TBA JOB SUMMARY: The Plant Engineer is responsible for the physical and mechanical maintenance of the facility, its equipment and grounds, and for the scheduling, completion of and evaluation (in cooperation with the building administrator) of all other maintenance/custodial tasks for the facility.
QualfonMachine Operator- Print & Bindery Experience QualfonMachine Operator- Print & Bindery ExperienceHighland Park, Michigan$16–$25 / hourQualfon’s mission is to help as many people as possible pursue their total vocation—as individuals and as members of society—by creating an ever-growing number of job opportunities as we strive to become the outsourcer of choice for our clients! Our Qualfon Mission is to help as many people as possible pursue their total vocation - as individuals and as members of society - by creating an ever-growing number of job opportunities as we strive to become the partner of choice for our clients .
ASRC IndustrialIndustrial Cleaner- Water blaster, Operators with K2 Industrial Services, Inc. ASRC IndustrialIndustrial Cleaner- Water blaster, Operators with K2 Industrial Services, Inc.Allen Park, MIOur crews work at power plants, refineries, and industrial facilities performing high-pressure cleaning and industrial maintenance services. You'll learn how to clean machinery, tanks, and industrial surfaces at power plants, refineries, and other facilities while operating vacuum systems and other specialized tools.
Standex EngravingMachine Operator - 1st Shift Standex EngravingMachine Operator - 1st ShiftFraser, MIFull timeThe Machine Operator is responsible for operating, monitoring, and maintaining automated equipment in a state-of-the-art automotive interior soft trim and plastic injection molding facility. Knowledge of plastic materials, molding parameters, and basic machine troubleshooting; ability to read work instructions and basic engineering drawings.
MeritHall, Inc.Extrusion Saw/Press Operator/Helper - Midnight Shift - Livonia & Garden City - $16 Per Hour MeritHall, Inc.Extrusion Saw/Press Operator/Helper - Midnight Shift - Livonia & Garden City - $16 Per HourGarden City, MIPosition may require sitting, walking, standing, bending, stretching, kneeling, reaching (including over the head), lifting, and other movements (not specified) for long periods of time. Must wear PPE required for this position (i.e: safety glasses, steel toe, ear plugs, gloves, etc.).
48forty SolutionsSAW OPERATOR 48forty SolutionsSAW OPERATORLivonia, MichiganOverview: As a Saw Shop Operator, you’ll get to setup our builders for success by setting up and operating power saws to slot, cut, and trim wood for pallet creation! Repetitively lift up to 50-75 pounds and adjust body position to bend, stoop, walk, turn, pivot, and stand for entire shifts of varying lengths in time.
Constellium SERework Weld Operator - 1st Shift Constellium SERework Weld Operator - 1st ShiftVan Buren Township, MIA successful Repair Welder will be able to analyze the level of repair necessary to remove weld defects and produce repairs which meet or exceed our customer and AWS specifications. Weld areas on aluminum parts using one or more techniques: Gas Metal Arc Welder (GMAW) or Gas Tungsten Arc Welder (GTAW).
Marmon Holdings IncWyandotte- Operator Helper (Rail) Marmon Holdings IncWyandotte- Operator Helper (Rail)Wyandotte, MI$20–$22 / hourThis position is responsible for operating electric, diesel-electric, or gas-turbine-electric locomotives; interpreting train orders, signals, and rules and regulations; transporting freight; timely and correct switching and placement of rail cars. Good communication skills; Must be comfortable engaging in a variety of different communicative modes (verbal, non-verbal, and written) and being attuned to others through strong active listening skills.
DTE Energy CoControl Room Supervisor DTE Energy CoControl Room Supervisornewport, MIThe candidate's education and experience must be verified and in accordance with Regulatory Qualifications List and ACAD 10001, Guidelines for Initial Training and Qualification of Licensed Operators as described below: High School diploma or equivalent GED. In accordance with the plant operating license, approved procedures, and management expectations, directs the operation of the plant, turbine generator, and their auxiliaries while maintaining a broad perspective of operational conditions affecting the safety of the plant.
DTE Energy CoOperations Shift Engineer DTE Energy CoOperations Shift Engineernewport, MIThe candidate's education and experience must be verified and in accordance with Regulatory Qualifications List and ACAD 10001, Guidelines for Initial Training and Qualification of Licensed Operators as described below: Bachelor's Degree or equivalent in engineering, engineering technology or related sciences AND 18 months of nuclear experience OR. Pass physical examination for Nuclear Regulatory Commission Regulation 396, "Certificate of Physical Exam" and Guide 1.134, "Medical Evaluation of Nuclear Power Plant Personnel Requiring Operator Licenses".
Wayne Regional Educational Service AgencyElementary Head Custodian/Engineer Wayne Regional Educational Service AgencyElementary Head Custodian/EngineerMI$19.38–$22.78 / hourDepending on the assigned location, the Engineer is responsible for carrying out engineering and/or maintenance duties, which may include lead Engineer designation. Complete charge and responsibility of heating, ventilating, cleaning of interior and exterior and general supervision of custodial staff assigned to the building.
General Motors CoTechnical Operations Specialist - Battery Cell Development Center General Motors CoTechnical Operations Specialist - Battery Cell Development CenterWarren, MIPerform mechanical and electrical work on equipment such as: Mixing, coating, and calendering systems Automated assembly equipment and robotics Welding systems Formation, conveyors, AGVs/AMRs, and electrical test stands Vision systems, PLC based systems, and local utilities Execute preventative, predictive, and corrective maintenance tasks per schedule. Working knowledge of: PLCs and controls Robotics Mechanical drives, power transmission, pneumatics, hydraulics Instrumentation and basic electronics Ability to work any shift (24/7 coverage model) and support weekends/holidays as needed.
ASRC IndustrialCrew Leader with K2 Industrial Services, Inc ASRC IndustrialCrew Leader with K2 Industrial Services, IncAllen Park, MIThe Crew Leader is responsible for leading safe, efficient, and high-quality work while serving as the primary point of contact between the crew, supervision, dispatch, project management, and the customer. We are seeking an experienced Crew Leader to oversee industrial cleaning crews on job sites including power plants, steel mills, and manufacturing facilities.
ASRC Industrial Services LLCCrew Leader with K2 Industrial ASRC Industrial Services LLCCrew Leader with K2 IndustrialAllen Park, MIThe Crew Leader is responsible for leading safe, efficient, and high-quality work while serving as the primary point of contact between the crew, supervision, dispatch, project management, and the customer. Competitive pay with overtime opportunities Steady work with a growing company Company-provided PPE and safety training Strong safety culture and team-oriented environment.
TRC Companies, Inc.OMS Applications Lead TRC Companies, Inc.OMS Applications LeadDetroit, Michigan$169,665.60–$174,866 / yearTRC Digital, a business unit within TRC, delivers IT/OT expertise and solutions to best address our client needs and has a proven track record supporting utilities in the deployment of complex operational technologies. Responsibilities: Lead the OMS workstream on ADMS Implementation projects, working with the ADMS Technical Lead, Project Manager, and other Workstream Leads to deliver these solutions to our customers.
Magna International, IncTechnician, Controls Magna International, IncTechnician, ControlsAnn Arbor, MichiganEnsures proper controls-specific documentation delivery from the Original Equipment Manufacturer(s) and maintains documents (e.g., electrical, hydraulic and pneumatic schematics, panel layouts, PLC, operator display, operator interface, robot programs, and machine power distribution) throughout equipment life cycle; and documents any changes during that time. Plans the updates, modifications, and continuous improvement of existing controls systems including robotic programs, ladder logic programs, relay logic, electrical distribution, motor controls, operator interface, hydraulics, and pneumatics distribution and control.
Regal RexnordNewBusiness Development Manager, Lifecycle Services (Remote) Regal RexnordBusiness Development Manager, Lifecycle Services (Remote)Detroit, MIRemoteThis role is built for a selfsufficient, streetsmart seller who knows how plants operate, understands conveyor and automation environments, and can independently create demandfor highvalue services such as installation, commissioning, modernization, reliability, and lifecycle support. The Company's end markets benefit from meaningful secular demand tailwinds, and include factory automation, food & beverage, aerospace, medical, data center, warehouse, alternative energy, residential and commercial buildings, general industrial, construction, metals and mining, and agriculture.