Manager of Quality Assurance GenScript ProBioManager of Quality AssuranceRedmond, Washington$100,000–$120,000 / yearThe QA Manager is accountable for ensuring consistent and harmonized execution of quality systems, including facility/utility/equipment qualification, quality systems establishment and maintenance, raw material management, production process support, product release, deviation and CAPA management, change management, and risk management across the Seattle, WA site. Guided by its mission to Make People and Nature Healthier Through Biotechnology, and its role as a well-recognized biotechnology company, GenScript has a team of approximately 6,165 employees and has served more than 200,000 customers across over 100 countries and regions.
Manager of Quality Assurance GenScript/ProBioManager of Quality AssuranceRedmond, WA$100,000–$120,000 / yearThe QA Manager is accountable for ensuring consistent and harmonized execution of quality systems, including facility/utility/equipment qualification, quality systems establishment and maintenance, raw material management, production process support, product release, deviation and CAPA management, change management, and risk management across the Seattle, WA site. Guided by its mission to Make People and Nature Healthier Through Biotechnology, and its role as a well-recognized biotechnology company, GenScript has a team of approximately 6,165 employees and has served more than 200,000 customers across over 100 countries and regions.
Mechanical Design Engineer, Production Starlink Space Exploration Technologies CorpMechanical Design Engineer, Production StarlinkRedmond, WA$100,000–$135,000 / yearITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. As a member of the Starlink Production Design team you will design the factory of the future, enabling mass production of satellites, ground stations, and high-performance space hardware that has never been produced in volume.
Mechanical Engineer Starlink Mobile Space Exploration Technologies CorpMechanical Engineer Starlink MobileRedmond, WA$100,000–$115,000 / yearITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Collaborate with cross-functional teams to create innovative payload electromechanical interfaces, spanning scales from the full satellite and antenna array to intricate PCB-level details.
Mechanical Engineer - Tooling/Controls, Satellites Starlink Space Exploration Technologies CorpMechanical Engineer - Tooling/Controls, Satellites StarlinkRedmond, WA$100,000–$135,000 / yearITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Your tooling will be used by different teams at Starlink spanning from operator-assisted stations to automated cells, and will build mission-critical hardware that is pivotal to the success of our next generation satellites.
Sr Manager, Product Management T-Mobile US IncSr Manager, Product ManagementBellevue, WA$140,500–$253,500 / yearDay-to-day activities include reviewing team roadmap priorities through the lens of business outcomes and competitive position; conducting development conversations to assess PM customer fluency; acting as the last human review before AI output shapes what gets built; translating VP-level strategic context into clear PM-level direction; tracking whether the metrics PMs committed to actually moved; and building the cross-functional relationships that protect the team's ability to execute. Brings relevant signals to the team proactively and ensures the PM team is informed and positioned before trends become obvious priorities.
Brand Partnerships Senior Account Executive iSpotBrand Partnerships Senior Account ExecutiveBellevue, WARemote$155,000–$168,000 / yearYou are skilled at collaborating with various stakeholders (prospective customers and internal cross-functional teams) to effectively sell iSpot's Media and Creative Measurement, Attribution, and Optimization services, as well as the iSpot SAGE Agentic AI platform. Fast, accurate and actionable measurement and attribution solutions enable advertisers to assess creative effectiveness, optimize media plans and attribute advertising results for cross-platform campaigns, all while benchmarking against competitors and historical norms.
Strategic Negotiator IV GoogleStrategic Negotiator IVKirkland, WANote: By applying to this position you will have an opportunity to share your preferred working location from the following: Kirkland, WA, USA; Atlanta, GA, USA; Austin, TX, USA; Chicago, IL, USA; New Albany, OH, USA; Addison, TX, USA; New York, NY, USA; Seattle, WA, USA; San Francisco, CA, USA . Work with geographically distributed, cross-functional teams such as acquisition and development, policy, legal, tax, data center operations, and HR to communicate strategy frameworks, collect and evaluate requirements, and address emerging issues.
NewMechanical Design Engineer, Production (Starlink) SpaceXMechanical Design Engineer, Production (Starlink)Redmond, WA$100,000–$135,000 / yearTo conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. As a member of the Starlink Production Design team you will design the factory of the future, enabling mass production of satellites, ground stations, and high-performance space hardware that has never been produced in volume.
NewMechanical Engineer - Tooling/Controls, Satellites (Starlink) SpaceXMechanical Engineer - Tooling/Controls, Satellites (Starlink)Redmond, WA$100,000–$135,000 / yearTo conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Your tooling will be used by different teams at Starlink spanning from operator-assisted stations to automated cells, and will build mission-critical hardware that is pivotal to the success of our next generation satellites.
NewMechanical Engineer (Starlink Mobile) SpaceXMechanical Engineer (Starlink Mobile)Redmond, WA$100,000–$115,000 / yearCollaborate with cross-functional teams to create innovative payload electromechanical interfaces, spanning scales from the full satellite and antenna array to intricate PCB-level details. To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Telecommunications Designer *REMOTE* Actalent IncTelecommunications Designer *REMOTE*Seattle, WARemote$30–$50 / hourThe role is perfect for entry to mid-level designers aspiring to advance to a Project Manager position within two years, in a company that prioritizes employee growth, career development, and fostering strong relationships with clients and colleagues. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing winner for both client and talent service.
Telecommunications Designer Actalent IncTelecommunications DesignerSeattle, WARemote$30–$50 / hourIn this role, you"ll collaborate with experienced engineers and designers to develop telecommunications and technology system designs for a variety of high-profile clients, including large-scale commercial, government, and mission-critical facilities. A growing multidisciplinary design-build and consulting firm is seeking a Telecommunications Designer to support a diverse portfolio of technology infrastructure, data center, commercial, and mission-critical projects throughout the Seattle area.
Manager Of Quality Assurance Genscript Biotech CorpManager Of Quality AssuranceRedmond, WA$100,000–$120,000 / yearThe QA Manager is accountable for ensuring consistent and harmonized execution of quality systems, including facility/utility/equipment qualification, quality systems establishment and maintenance, raw material management, production process support, product release, deviation and CAPA management, change management, and risk management across the Seattle, WA site. Guided by its mission to Make People and Nature Healthier Through Biotechnology, and its role as a well-recognized biotechnology company, GenScript has a team of approximately 6,165 employees and has served more than 200,000 customers across over 100 countries and regions.
Senior Manager, Corporate Accounting Anthropic PBCSenior Manager, Corporate AccountingSeattle, WA$230,000–$300,000 / yearThis research continues many of the directions our team worked on prior to Anthropic, including: GPT-3, Circuit-Based Interpretability, Multimodal Neurons, Scaling Laws, AI & Compute, Concrete Problems in AI Safety, and Learning from Human Preferences. The successful candidate will write and own the policies and SOPs their team operates against, design the controls framework, and continuously improve the processes underneath it - including using Claude and other tools to automate work that doesn't need to be manual.
Manager of Quality Assurance Genscript Biotech CorpManager of Quality AssuranceRedmond, WA$100,000–$120,000 / yearThe QA Manager is accountable for ensuring consistent and harmonized execution of quality systems, including facility/utility/equipment qualification, quality systems establishment and maintenance, raw material management, production process support, product release, deviation and CAPA management, change management, and risk management across the Seattle, WA site. Guided by its mission to Make People and Nature Healthier Through Biotechnology, and its role as a well-recognized biotechnology company, GenScript has a team of approximately 6,165 employees and has served more than 200,000 customers across over 100 countries and regions.
Field Engineer Asplundh Engineering Services, LLCField EngineerWoodinville, WAFull timeSummary The Engineer/Drafter Position will support utility project engineers and project managers in the planning, engineering, and design of electric distribution projects. Under the guidance of a PM and/or Engineer, the engineer/drafter assists in coordination and communication tasks with other departments such as Drafting, Real Estate, Environmental, Permitting, System Planning, ETC.
CAD Technician III Bowman Consulting Group LtdCAD Technician IIISeattle, WA$27–$41 / hourWork effectively on design teams and coordinate with team members including other CAD Drafters, designers, engineers, managers, administrative staff and construction staff leading to final engineering documents. It is an opportunity to be part of a diverse and engaged community of professionals, to be treated as a respected and valued member of a motivated team and to be empowered to do exceptional work that advances the best interest of everyone involved.
CAD/Product Definition Mechanical Designer AmentumCAD/Product Definition Mechanical DesignerEdmonds, WashingtonThe Mechanical Designer will help ensure that CAD models, drawings, bills of material, configuration records, engineering changes, and associated technical data are structured, traceable, and maintained in a manner that supports lifecycle visibility from concept development through fabrication, installation, test, sustainment, and future configuration reuse. 3D CAD Modeling and Mechanical Design Support Develop fully parametric 3D solid models, assemblies, subassemblies, and component models in Autodesk Inventor based on sketches, redlines, field measurements, legacy drawings, vendor data, and design-engineer direction.
CAD/Product Definition Mechanical Designer Amentum Services IncCAD/Product Definition Mechanical DesignerEdmonds, WA$80,000–$140,000 / yearThe Mechanical Designer will help ensure that CAD models, drawings, bills of material, configuration records, engineering changes, and associated technical data are structured, traceable, and maintained in a manner that supports lifecycle visibility from concept development through fabrication, installation, test, sustainment, and future configuration reuse. The Mechanical Designer will work closely with design engineers, systems engineers, drafters, technicians, vendors, and field personnel to support hardware from early concept through fabrication, installation, checkout, test, sustainment, and configuration-controlled release.