Commissioning Manager Caterpillar IncCommissioning ManagerFort Worth, TX$128,470–$192,710 / yearGlobally, we deliver engineered oilfield and drilling equipment repair and certification, mechanical and rotating equipment repairs and upgrades, rapid prototyping of spare parts, robust asset management, operation and maintenance and field engineering services. Job Summary: Caterpillar is seeking a Commissioning Manager to lead a team of commissioning engineers supporting the installation, startup, testing, and performance validation of large natural gas power generation systems across the United States.
RESEARCH ENGINEER - SR. RESEARCH ENGINEER - Liquid Propulsion Systems Engineer Southwest Research Institute - FulltimeRESEARCH ENGINEER - SR. RESEARCH ENGINEER - Liquid Propulsion Systems EngineerSan Antonio, TXFull timeDesired experience, but not required: engineering MS or PhD degrees; range safety; cryogenics; microgravity fluids; GNC familiarity; mechanical design and fabrication; computational programing/scripting; LabVIEW, PID control and data acquisition; SolidWorks; ANSYS products. Solve challenges on components and/or systems that span between the pressurant tanks, through pressurization systems, into the propellant tanks, down the feedlines, combustion, and finally out the engine nozzles.
Launch Engineer - Fluid Systems IV Firefly AerospaceLaunch Engineer - Fluid Systems IVBriggs, TXDesign, commission, and operate mission-critical fluid systems across a growing portfolio of launch sites, from historical US-based pads to greenfield builds in extreme locations including Wallops Flight Facility and Esrange, Sweden. Design, build, and activate new fluid systems across a global launch portfolio including Vandenberg Space Force Base (CA), Wallops Flight Facility (VA), Cape Canaveral Space Force Station (FL), and Esrange Space Center (Sweden).
Senior Subsystem Test Engineer Skyways Air Transportation IncSenior Subsystem Test EngineerAustin, TXYou will work closely with mechanical, electrical, software, manufacturing, and flight test teams to identify failures early, improve system reliability, and support rapid aircraft iteration. Bonus Points If You''ve: Participated in Formula SAE, Baja SAE, Solar Car, Intercollegiate Rocket Engineering Competition, Design Build Fly (DBF), FIRST Robotics, Battlebots, etc.
NewGround System Fluid Mechanical Design Engineer III Blue OriginGround System Fluid Mechanical Design Engineer IIIKent, Texas$90,934–$127,307.25 / yearand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing, vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Integration & Test Engineer Starship Space Exploration Technologies CorpIntegration & Test Engineer StarshipTXITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Ability to perform job duties that require standing, kneeling, crouching, twisting upper body, working in cramped positions in small openings and climbing hand over hand.
Lead Stress Analyst - Propulsion and Fluids Firefly Aerospace IncLead Stress Analyst - Propulsion and FluidsCedar Park, TXYou will define analysis methods, drive the most complex and highest-risk analyses, set the technical direction for propulsion & fluid systems stress, and be a key voice in decisions on material allowables. As the Lead Stress Analyst for Propulsion & Fluid Systems in the Mechanical Engineering department, you will provide technical leadership for the structural analysis of propulsion and fluid system hardware.
Propulsion Drawing Checker/CAD Modeler Venus AerospacePropulsion Drawing Checker/CAD ModelerHouston, TXFull timeThe Role: Propulsion Drawing Checker/CAD Modeler You will be involved in the making of engineering drawings from 3D solid models, drawing checking and working through workflow issues to obtain release. You will be responsible for working with designs from concepts to flight maturity hardware that involve propulsion hardware from piece parts to engine assemblies and/or Propellant & Pressure Management (PPMS) systems.
Senior Mechanical Engineer CesiumAstroSenior Mechanical EngineerAustin, TXThe ideal candidate will be versatile and proficient in mechanical analysis, electronics packaging, computer-aided design (CAD), mechanical interfaces, thermal architecture, spacecraft propulsion, deployable and actuated structures, and environmental qualification of spacecraft antennas and payloads. Please Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State.
Wire Harness Electrical Engineer II Firefly Aerospace IncWire Harness Electrical Engineer IICedar Park, TXOur small- to medium-lift launch vehicles, lunar landers, and orbital vehicles allow us to service the entire lifecycle of government and commercial missions from low Earth orbit to the Moon and beyond. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
Manager, Propulsion (Systems & Components) (R5087) Shield AI IncManager, Propulsion (Systems & Components) (R5087)Dallas, TX$150,000–$230,000 / yearPreferred qualifications: Experience designing propulsion subsystems including valves, bleed air systems, oil systems, ducting, thermal systems, or structural integration hardware. This role requires strong technical leadership, execution ownership, and close coordination across propulsion, airframe, manufacturing, controls, and flight test organizations.
Manager, Propulsion (Fuel System) (R5088) Shield AI IncManager, Propulsion (Fuel System) (R5088)Dallas, TX$150,000–$230,000 / yearThis role oversees the architecture, integration, testing, and operational support of flight-critical fuel systems operating across demanding thermal environments, aggressive maneuvering conditions, and mission-critical operating profiles. You will lead engineers and technicians responsible for fuel tanks, fuel delivery systems, venting, pressurization, level sensing, and associated propulsion fluid systems.
Sr Performance Engineer Standard AeroSr Performance EngineerSan Antonio, TX3+ years of hands-on or applied engineering experience supporting gas turbine, propulsion, or internal combustion engine systems, including performance analysis, diagnostics, or testing activities. Bachelor’s degree in Mechanical Engineering, Aerospace Engineering, Automotive Engineering, or a related engineering discipline; or equivalent practical experience.
Lead UAS Systems Engineer KRUSH Tech IncLead UAS Systems EngineerAustin, TXDemonstrated experience leading multidisciplinary engineering teams, driving technical roadmaps, and delivering complex aerospace or defense products through technical leadership and cross-functional collaboration. This role owns the overall system architecture and leads cross-functional engineering teams through concept development, prototyping, verification, validation, and transition to full-rate production, ensuring products are high-performing, reliable, manufacturable, and mission-ready.
Engineer II, Structural Analysis (R4952) Shield AI IncEngineer II, Structural Analysis (R4952)Dallas, TX$88,000–$130,000 / yearThis role is ideal for engineers with 2+ years of experience looking to gain expertise in finite element analysis (FEA), composite materials, mechanical testing, and aircraft loads analysis in a fast-paced, high-tech aerospace environment. With offices and facilities across the U.S., Europe, the Middle East, and Asia-Pacific, Shield AI's technology actively supports operations worldwide.
Eng II, Product Engineer RTX CorpEng II, Product EngineerMcKinney, TXYou will interface with both internal and external suppliers, engineering, and program leadership personnel to develop cost reduction activities, mitigate process defects, and promote effective design choices through statistical analysis. At RTX, the world largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world's most complex problems.
Test Systems & Software Integration Engineer X-Bow SystemsTest Systems & Software Integration EngineerAustin, TXFull timeYou will partner directly with manufacturing engineers, test engineers, quality, IT, and software engineering to ensure every significant engineering event occurring in the physical world becomes structured, traceable, and immediately available throughout the enterprise. About the RoleWe are seeking a Test Systems & Software Integration Engineer to transform how physical testing, manufacturing operations, and engineering execution are connected within our Digital Engineering ecosystem.
Project Engineer II Sierra Nevada CorpProject Engineer IIPlano, TX$165,010.21–$226,889.04 / yearThe ISR (Intelligence, Surveillance & Reconnaissance), Aviation, and Security (IAS) business area is a leader in ISR and aviation, it is a leading prime manned and unmanned aircraft systems integrator for innovative, high-performance ISR and aviation systems. Its end-to-end Command, Control, Computers, Communications and Intelligence, Surveillance & Reconnaissance (C4ISR) capabilities encompass design, integration, test, certification, ground/flight training and complete logistics support.
Electrical Engineer- Spacecraft Avionics II / III Firefly AerospaceElectrical Engineer- Spacecraft Avionics II / IIICedar Park, TXYou also help developed and design the HIL system in order to verify functionality before spacecraft integration, interfacing with software, mechanical, propulsion, fluids, and structures teams to ensure the proper functionality of the integrated solution. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
GNC Engineer III, Launch Vehicles Firefly AerospaceGNC Engineer III, Launch VehiclesCedar Park, TXTo conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. As a Senior GNC Engineer at Firefly Aerospace, you will design and implement advanced control systems, autonomous flight software, and guidance algorithms for operational launch vehicles.