NewQuality Control Inspector hydrasearch company, llcQuality Control InspectorStevensville, MD$22–$30 / hourYou will be responsible for reviewing supplier documentation to ensure total conformance to purchase requirements and will play a key role in communicating technical findings to both production and quality personnel to ensure operational excellence. In this role, you will support manufacturing operations by verifying that all incoming materials, in-process work, and finished products strictly meet defined engineering and quality requirements.
Electrical Quality Control Inspector M.C. Dean, IncElectrical Quality Control InspectorBaltimore , Maryland$35.50–$39.50 / hourFull timePerform all quality reporting requirements outlined in the MCD Quality Management System (including the inspection checklists, Data Collection Reports (PDCR), hold logs, discrepancy notices, waiver logs etc.) Identify for segregation nonconforming units following the MCD Nonconformance procedure for prefabricated and purchased products. Participate in Initial Inspection to assure all required/approved materials, personnel and equipment are available, verify the site conditions, inspect the initial installation of the work and identify the required level of workmanship, quality, and safety measures.
Construction Quality Control Inspector IQUASAR LLCConstruction Quality Control InspectorLaurel, MDFull timeReview contract deliverables and submittals for conformance and perform daily inspections to verify all work is in strict compliance with the contract, and request correction of any deficiencies. Minimum of 10 years construction management and/or craft supervision experience commercial or Government construction projects.
Facilities Maintenance Quality Control Inspector CBRE Government & Defense ServicesFacilities Maintenance Quality Control InspectorAnnapolis, MarylandThe inspector is responsible for proactively identifying quality issues, maintaining documentation, and supporting a culture of continuous improvement on all task orders issued under the IDIQ. Inspect all work under IDIQ task orders to ensure conformance with contract specifications, approved plans, and applicable codes.
Quality Inspector Netzer MetalworksQuality InspectorEssex, MDInspectors, are tasked with conducting tests, analyzing measurements, and overseeing production processes. • Maintain controlled electronic documents and test records in a timely and accurate manner.
NewQuality Control Inspector II Wingard AerospaceQuality Control Inspector IIBaltimore, MD$30–$35 / hourExposure to moderate noise levels, moving mechanical equipment, heat, dust, and other typical manufacturing conditions may occur. Experience using basic measuring equipment such as micrometers, calipers, optical comparators, indicators, gages, etc.
Electrical Quality Control (QC) Inspector M.C. Dean, IncElectrical Quality Control (QC) InspectorFrederick , Maryland$35.50–$39.50 / hourFull timePerform all quality reporting requirements outlined in the MCD Quality Management System (including the inspection checklists, Data Collection Reports (PDCR), hold logs, discrepancy notices, waiver logs etc.) Identify for segregation nonconforming units following the MCD Nonconformance procedure for prefabricated and purchased products. Participate in Initial Inspection to assure all required/approved materials, personnel and equipment are available, verify the site conditions, inspect the initial installation of the work and identify the required level of workmanship, quality, and safety measures.
Construction Quality Control Inspector CbConstruction Quality Control InspectorLaurel, MarylandReview contract deliverables and submittals for conformance and perform daily inspections to verify all work is in strict compliance with the contract, and request correction of any deficiencies. Minimum of 10 years construction management and/or craft supervision experience commercial or Government construction projects.
Quality Control Inspector BPI MedicalQuality Control InspectorWashington, WashingtonParticipating in investigations of quality issues and working with cross-functional teams to determine root cause and implement corrective and preventive actions. With E-Verify we are able to confirm the employment authorization of all newly hired employees and most existing employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.
Receiving Quality Inspector PGS WorldwideReceiving Quality InspectorSevern, MD$22–$36.88 / hourThe inspector will evaluate incoming electronic and mechanical materials, review supplier documentation, identify nonconforming material, and work closely with Engineering and Manufacturing teams supporting prototype, New Product Introduction (NPI), and production builds. PGS Worldwide is seeking a Receiving Quality Inspector in Severn, Maryland for a one-year onsite contract-to-hire role supporting a leading aerospace & defense company.
Facilities Maintenance Quality Control Inspector J & J Worldwide ServicesFacilities Maintenance Quality Control InspectorAnnapolis, MD$65,000–$85,000 / yearPart timeThe inspector is responsible for proactively identifying quality issues, maintaining documentation, and supporting a culture of continuous improvement on all task orders issued under the IDIQ. Inspect all work under IDIQ task orders to ensure conformance with contract specifications, approved plans, and applicable codes.
Aerospace Quality Inspector PGS WorldwideAerospace Quality InspectorRockville, MD$22–$36.88 / hourThis position will perform detailed in-process and final inspections of electronic, electromechanical, and mechanical aerospace hardware while supporting prototype, New Product Introduction (NPI), and production builds. PGS Worldwide is seeking an Aerospace Quality Inspector in Severn, Maryland for a one-year onsite contract-to-hire role supporting a leading aerospace & defense company.
Project Inspector P17 Solutions LLCProject InspectorWashington, DCFull timeVisit us at www.p17solutions.comPosition Summary:The Project Inspector is responsible for monitoring, inspecting, documenting, and verifying construction, installation, infrastructure modernization, and facility improvement activities supporting the Federal Aviation Administration's (FAA) Brand-New Air Traffic Control System (BNATCS) program. Citizenship/Permanent Residency Requirement: Must be a US CitizenRelocation: N/AWork EnvironmentFull-time positionRemote / Hybrid eligible for those who currently reside in the Atlantic City Region, NJ, Washington, DC, or Oklahoma City, OK.You may be disqualified if you do not reside in the Atlantic City Region, NJ, Washington, DC, or Oklahoma City, OK area.
Quality Inspector Teledyne TechnologiesQuality InspectorElkridge, MarylandOur products include advanced surveillance sensors, unmanned air and ground vehicles, sensing devices used to detect chemicals, biological agents, radiation and explosives, and a host of other solutions that help warfighters, first responders, and search-and-rescue teams do their jobs better. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research..
2nd Shift Quality Inspector Hog Slat Inc.2nd Shift Quality InspectorClinton, MarylandSKILLS/KNOWLEDGE REQUIRED: The ideal candidate will have the following experience/educational background: Working knowledge of Quality Systems and Principles. JOB SUMMARY: Hog Slat, Inc. is the world’s leading provider of parts, equipment and turn-key construction to the swine & poultry industries.
QA Inspector Explore openQA InspectorLaurel, MarylandQualityControl #ConstructionManagement #FederalJobs #GovernmentContracting #FacilitiesManagement #QAInspector #ConstructionCareers #PMP #InfrastructureProjects #ConstructionProjects #EngineeringCareers #FieldEngineering #ContractSupport #DHSJobs #CareerOpportunities #ClearanceJobs. This individual is responsible for ensuring the contractor implements an effective Quality Control program and uses the provisions daily to control the quality of work to support construction and facility engineering operations at the James J. Rowley Training Center (JJRTC), the primary training facility for the United States Secret Service in Laurel, Maryland.
Quality Inspector AmentumQuality InspectorSpringfield, Virginia$85,000–$90,000 / yearWork Environment : Typical office environment with no unusual hazards, occasional lifting to 20 pounds, constant sitting and use of a computer terminal, constant use of sight abilities while writing, reviewing, and editing documents, constant use of speech/hearing abilities for communication, and constant mental alertness. May work in any of the following areas of quality control/assurance engineering: design, incoming material, process control, product evaluation, inventory control, product reliability, research and development and administrative application.
Quality Inspector AHU TechnologiesQuality InspectorWashington, District of ColumbiaWe are currently working on Various projects such as media entertainment, ERP Solutions, data warehousing, Web Applications, Telecommunications and medical to our clients all over the world. AHU Technologies INC. is an IT consulting and permanent staffing firm that meets and exceeds the evolving IT service needs of leading corporations within the United States.
NewReceiving Quality Inspector III BAE Systems PlcReceiving Quality Inspector IIIManassas, VA$57,319–$91,710 / yearThe Receiving Inspector will report to the Quality Manager and perform the following tasks: Uses predetermined methods, operations, setups and prescribed specifications to visually inspect in-process and completed products such as electronic units and subsystems, precision electromechanical assemblies or mechanical units, subassemblies, structural flaws, internal defects, and missing welds. About BAE Systems Electronic Systems BAE Systems, Inc. is the U.S. subsidiary of BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services.
Quality Inspector ( NY ) AHU TechnologiesQuality Inspector ( NY )Washington, District of ColumbiaEducation And Experience • 3-5 years of related experience and/or training required • Associate degree or equivalent from a two-year college or technical institute preferred • Must have knowledge of GD&T and Blueprints • Must be proficient with hand measuring equipment and various other inspection devices LANGUAGE SKILL: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. COMPUTER SKILLS: Microsoft Word processing, Microsoft Excel Spreadsheets, Internet software, Navigate E-mail, Database software (preferred) DCC Coordinate Measuring Machine operation ~ with existing programs PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.