April 24, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com.
Candidates must also have all applicable MARTCP certificates (based on contract assignment type), Must have a current SHA Temporary Traffic Control Manager’s Training Course Card (or secure the same prior to work assignment) as well as MDE RPC Card and SHA E&S Yellow Card. All assigned personnel must also complete OSHA 10 hour training (training paid by WRA) and assist with completion of OOC Resume Packages for SHA approval prior to assignment to contracts.
Candidates must also have all applicable MARTCP certificates (based on contract assignment type), Must have a current SHA Temporary Traffic Control Manager’s Training Course Card (or secure the same prior to work assignment) as well as MDE RPC Card and SHA E&S Yellow Card. All assigned personnel must also complete OSHA 10 hour training (training paid by WRA) and assist with completion of OOC Resume Packages for SHA approval prior to assignment to contracts.
Owings Mills, MD7 days ago
By applying for this job, you agree to receive calls, Al-generated calls, text messages, or emails from Synerfac Technical Staffing and our contracted partners. -Support corrective action process by following up on corrective action requests, verifying the effectiveness of the actions taken and closure of requests .
Clarksburg, MD30+ days ago
With over 1,000 employees, TDSI and its four subsidiaries (Tampa Microwave, Advanced Acoustic Concepts, Trusted Cyber Technologies, and Digital Receiver Technology), supports U.S. Joint Services, special operations forces and multi-national partners with a variety of communication, visualization, electronic warfare, and sensor/sonar capabilities. TDSI considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.
CLARKSBURG, MD14 days ago
With over 1,000 employees, TDSI and its four subsidiaries (Tampa Microwave, Advanced Acoustic Concepts, Trusted Cyber Technologies, and Digital Receiver Technology), supports U.S. Joint Services, special operations forces and multi-national partners with a variety of communication, visualization, electronic warfare, and sensor/sonar capabilities. TDSI considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.
Review contract deliverables and submittals for conformance and perform daily inspections to verify all work is in strict compliance with the contract, and request correction of any deficiencies. Minimum of 10 years construction management and/or craft supervision experience commercial or Government construction projects.
Frederick , Maryland18 days ago
Perform all quality reporting requirements outlined in the MCD Quality Management System (including the inspection checklists, Data Collection Reports (PDCR), hold logs, discrepancy notices, waiver logs etc.) Identify for segregation nonconforming units following the MCD Nonconformance procedure for prefabricated and purchased products. Participate in Initial Inspection to assure all required/approved materials, personnel and equipment are available, verify the site conditions, inspect the initial installation of the work and identify the required level of workmanship, quality, and safety measures.
The inspector is responsible for proactively identifying quality issues, maintaining documentation, and supporting a culture of continuous improvement on all task orders issued under the IDIQ. - Inspect all work under IDIQ task orders to ensure conformance with contract specifications, approved plans, and applicable codes.
This senior-level role requires a deep understanding of Reliability-Centered Maintenance RCM methodologies non-destructive testing NDT techniques and QCQA program development for major industrial or construction projects. Amentum is seeking an experienced Quality Control Quality Assurance QCQA Supervisor with extensive knowledge of operations and maintenance O&M practices and large-building systems to support facility operations in the Washington DC area.
Read drawings, comprehend specifications and tolerances, read dial indicators and digital gages, compare results with specifications and record test data, confer with engineers, technicians and production personnel as necessary. Today, we are a leading global provider of engineered products and services to several industries, including energy, defense, aerospace, entertainment/theme parks, materials handling, and science and research.
The inspector monitors' the maintenance departments program, such as but not limited to, engine oil consumption, logs and records processes, hydraulic contamination, NDI, electrical static discharge, employee certification programs, confined space entry, tool control, foreign object damage, material control receiving inspections, weight and balance, fall protection and safety programs. Perform the receiving, in-process, final quality, flight safety inspections and functional operational tests during organizational, intermediate and depot level maintenance, modification and repair of military tactical aircraft systems or associated components.
Baltimore, MD30+ days ago
li>Perform all quality reporting requirements outlined in the MCD Quality Management System (including the inspection checklists, Data Collection Reports (PDCR), hold logs, discrepancy notices, waiver logs etc.) Identify for segregation nonconforming units following the MCD Nonconformance procedure for prefabricated and purchased products. Participate in Initial Inspection to assure all required/approved materials, personnel and equipment are available, verify the site conditions, inspect the initial installation of the work and identify the required level of workmanship, quality, and safety measures.
The inspector is responsible for proactively identifying quality issues, maintaining documentation, and supporting a culture of continuous improvement on all task orders issued under the IDIQ. Inspect all work under IDIQ task orders to ensure conformance with contract specifications, approved plans, and applicable codes.
p>At Ameresco, we show the way by developing, constructing and operating tailored smart energy efficiency solutions, distributed energy resources, and infrastructure upgrades that drive cost savings, resilience, decarbonization, and innovation. Ameresco, Inc. (NYSE:AMRC) is a leading energy solutions provider dedicated to helping customers reduce costs, enhance resilience, and decarbonize to net zero in the global energy transition.
Fort George G Meade, MD30+ days ago
Provide and maintain a quality control program directly related to Chimes District of Columbia required training programs and approved by the site contracting office, Chimes District of Columbia management, and building management. Experience: Minimum two (2) years' experience within the past five (5) years in performing quality control inspections or managing a quality control program for similar services.
Springfield, VA30+ days ago
This role involves conducting thorough inspections and tests throughout the production or service process, identifying defects or deviations, and documenting findings to ensure compliance with regulatory requirements and company guidelines. Strong analytical skills, attention to detail, and effective communication are essential as the inspector must accurately report quality issues and contribute to continuous improvement initiatives.
Washington, Washington30+ days ago
Participating in investigations of quality issues and working with cross-functional teams to determine root cause and implement corrective and preventive actions. With E-Verify we are able to confirm the employment authorization of all newly hired employees and most existing employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.
Annapolis, Maryland7 days ago
The inspector is responsible for proactively identifying quality issues, maintaining documentation, and supporting a culture of continuous improvement on all task orders issued under the IDIQ. Inspect all work under IDIQ task orders to ensure conformance with contract specifications, approved plans, and applicable codes.
Gaithersburg, MD17 days ago
Xometry's digital marketplace gives manufacturers the critical resources they need to grow their business while also making it easy for buyers at Fortune 1000 companies to tap into global manufacturing capacity. As a Quality Control Inspector, you will play a crucial role in ensuring the highest quality of manufactured parts and finished goods that are delivered to our customers.
Laurel, Maryland30+ days ago
Review contract deliverables and submittals for conformance and perform daily inspections to verify all work is in strict compliance with the contract, and request correction of any deficiencies. Minimum of 10 years construction management and/or craft supervision experience commercial or Government construction projects.
Washington, DC13 days ago
This means that when the facility is faced with an institutional emergency, employees in this position may be required to remain at their work location or to report to work to protect, recover, and continue operations at the facility. Job Summary: Responsible for assisting in quality control and providing training and assistance for custodial work according to the provisions of the contract.
Fort George G Meade, MD30+ days ago
Provide and maintain a quality control program directly related to Chimes District of Columbia required training programs and approved by the site contracting office, Chimes District of Columbia management, and building management. · Minimum two (2) years’ experience within the past five (5) years in performing quality control inspections or managing a quality control program for similar services.
Washington, DC14 days ago
This means that when the facility is faced with an institutional emergency, employees in this position may be required to remain at their work location or to report to work to protect, recover, and continue operations at the facility. Responsible for assisting in quality control and providing training and assistance for custodial work according to the provisions of the contract.
Baltimore , Maryland30+ days ago
This role is responsible for supervising QC personnel, ensuring contract compliance, driving consistent implementation of the 3-Phase Quality Control process, and serving as the primary quality liaison with project leadership, General Contractors, and Owners. Headquarters in Tysons, Virginia, M.C. Dean delivers resilient, secure, and innovative power and technology solutions through engineering expertise and smart systems integration.
How many years of full-time equivalent experience do you have as the primary and lead HVAC technical expert and quality control inspector responsible for the day-to-day oversight, troubleshooting, and management for the operation, repair and replacement of complex HVAC systems AND components for a large portfolio (over 5 million square feet of occupiable space) of varied commercial building types and uses?. Experience as the primary and lead HVAC technical expert and quality control inspector responsible for the day-to-day oversight, troubleshooting, and management for the operation, repair and replacement of complex HVAC systems AND components for a large portfolio (over 5 million square feet of occupiable space) of varied commercial building types and uses.
confirm-language#open" data-confirm-language-url-value="/job-description?id=a5c6f1e6-83f9-477e-8432-7b43fa0f02c1&locale=fr_CA" data-confirm-language-update-from-value="are_you_sure_change_language_applicant" data-confirm-language-current-locale-value="en" data-confirm-language-is-post-value="true" data-confirm-language-params-value="{"locale":"en","controller":"business_processes","action":"show","id":"a5c6f1e6-83f9-477e-8432-7b43fa0f02c1"}" data-confirm-language-new-locale-value="fr_CA" class="vidcruiter-language-selector-dropdown-option" href="#">Français (CA). feedback--toast#dismiss" class="flex !bg-transparent items-center justify-center absolute top-3 right-3 h-6 opacity-70 hover:opacity-100 focus:opacity-100 transition-all duration-300 text-yellow-900" aria-label="Close" data-feedback--toast-target="closeButton" >.
For description, see this url: https://www.almacgroup.com/careers/apply/?gnk=job&gni=8a7887ac9d02e529019d1a915fbf68d0.
Additional responsibilities include incubation and enumeration of media plates and samples, processing plates for microbial identification through external laboratories, operating laboratory instruments in accordance with SOPs, and documenting data accurately in electronic systems following ALCOA+ principles. In this role, you will support routine microbiological quality control activities such as Rapid Sterility, Mycoplasma, Bioburden, Endotoxin, Growth Promotion, and Cell Aliquoting under approved methods and cGMP/GDP expectations.
We pioneered cloud computing and never stopped innovating - that's why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses. We support all AWS data centers and all of the servers, storage, networking, power, and cooling equipment that ensure our customers have continual access to the innovation they rely on.
Our diverse and expansive project scope of heavy civil infrastructure projects incorporates all degrees of civil construction that includes but is not limited to; Conventional Concrete, Roller Compacted Concrete and Earthen Dams, Navigational Waterway Locks, Reservoirs, Large Diameter Underground Utilities, Treatment Facilities, Landfills, Site Work, Mass Soil & Rock Excavation, Coal Ash Closures, DOT Highway & Bridge Construction, and on demand emergency services. The Tully Group is one the nation's largest privately held, family-owned construction firms with their corporate office in New York City and long history of heavy civil projects in the Metro New York Area and New Jersey.
Lorton, Virginia27 days ago
Ability to communicate effectively with, persuade, and gain “buy-in” from, a broad range of stakeholders (e.g., executive team, leadership team, Business Unit Leaders, direct reports, clients, trade partners, and third party providers. As a Senior Quality Control Manager, you will ensure the project is built within contract document specifications, owner requirements, and comply with local, state, and federal building codes.
Springfield, VA30+ days ago
The QCM serves as the central point of contact for all quality matters, leads quality inspections, conducts audits, analyzes quality data, and drives continuous improvement initiatives. This role supports facility operations, maintenance, and repair activities and requires strong leadership, analytical abilities, and expertise in quality assurance methodologies.
The Quality Control Manager (QCM) serves as the Contractors designated representative responsible for implementation and management of the Contractor Quality Control (CQC) System in accordance with USACE, NAVFAC, and DoD requirements, including EM 385-1-1 and applicable UFC/UFGS specifications. We are proud to have built, and continue to foster, an incredibly talented team spanning across the globe in hundreds of different fields - each team member proud to serve our country with first-class business services, while also making a difference for our Chugach shareholders.
LINTHICUM, Maryland30+ days ago
The Quality Control Manager (QCM) serves as the Contractor’s designated representative responsible for implementation and management of the Contractor Quality Control (CQC) System in accordance with USACE, NAVFAC, and DoD requirements, including EM 385-1-1 and applicable UFC/UFGS specifications. We are proud to have built, and continue to foster, an incredibly talented team spanning across the globe in hundreds of different fields – each team member proud to serve our country with first-class business services, while also making a difference for our Chugach shareholders.
li>Develop engineering procedures, including document control, submissions management, creation and tracking of Requests For Information (RFIs), material samples documentation, and tracking of potential cost changes documentation, and tracking of approved change orders within budgetary requirements. Position Description: Responsible for planning, coordinating, and developing the project-specific Quality Assurance/Quality Control (QAQC) Plan that incorporates the policies and procedures necessary to deliver the project fully compliant with the contract documents.
Washington, DC30+ days ago
Identify and resolve problems in a timely manner; gather and analyze information skillfully; develop alternative solutions; works well in group problem solving situations; use reason when dealing with emotional topics. Write clearly and informatively; edits work for spelling and grammar; varies writing style to meet needs; presents numerical data effectively; able to read and interpret written information.
p>Type of Position: Full-Time, Regular Tier: I Location: National Capital Region Schedule: Varies FLSA Classification: Exempt Reports to: General Manager. ABOUT YUKON MANAGEMENT, LLC Our parent company, Gana-AYoo, Limited is an Alaska Native-Owned Village Corporation serving its more than 2,000 Native shareholders and four villages located along the Yukon River.
Alpha Corporation established in 1979, is a full-service woman-owned firm, providing civil, and structural engineering, program and construction management, project controls, and technology services for various building types, transportation, and heavy infrastructure projects. Leading QC coordination meetings to review open observations; schedules, including inspections, tests, and critical activities; logs; redlines, BIM, and as-builts; punch list items; and closeout documentation.
Uses predetermined methods, operations, setups and prescribed specifications to inspect visually in-process and completed products such as electronic units and subsystems, precision electromechanical assemblies or mechanical units, subassemblies, structural flaws, internal defects, and missing welds. On top of working in a highly supportive, friendly, respectful environment, this is what you can expect when you join our team as a Regular Full-Time employee: Flexible, compressed work schedules, depending on business requirements, where you have the option of Fridays off, as well as the possibility to work remote part-time.
Washington, District of Columbia27 days ago
Ability to communicate effectively with, persuade, and gain “buy-in” from, a broad range of stakeholders (e.g., executive team, leadership team, Business Unit Leaders, direct reports, clients, trade partners, and third party providers. Additional benefits include life insurance, commuter benefit, short & long term disability, fitness reimbursement, FSA, tuition reimbursement, back-up daycare, tutoring & family support benefits, EAP/Work-Life assistance, and a holiday contribution program.
Ability to communicate effectively with, persuade, and gain "buy-in" from, a broad range of stakeholders (e.g., executive team, leadership team, Business Unit Leaders, direct reports, clients, trade partners, and third party providers. As a Senior Quality Control Manager, you will ensure the project is built within contract document specifications, owner requirements, and comply with local, state, and federal building codes.
This senior-level role requires a deep understanding of Reliability-Centered Maintenance (RCM) methodologies, non‑destructive testing (NDT) techniques, and QC/QA program development for major industrial or construction projects. Amentum is seeking an experienced Quality Control / Quality Assurance (QC/QA) Supervisor with extensive knowledge of operations and maintenance (O&M) practices and large‑building systems to support facility operations in the Washington, DC area.
The organization emphasizes the use of innovative and cutting-edge construction technology and offers a culture where team members think like owners, contribute directly to project outcomes, and have opportunities to grow and learn from experienced project managers and project executives. This role leads the full quality control program for a large-scale, multi‑year renovation project in Fairfax, VA, involving demolition, restructuring, and new vertical construction on a $107 million project.