UNKNOWN

FEED

Perform a full range of technical support services on designated equipment, including troubleshooting, repair, overhaul, testing, certification, installation, and performance analysis in support of FAALC Product Divisions and Groups. Provide electronics technician services to FAALC Group/Product Divisions to ensure electronic systems, subsystems, and components meet serviceability, reliability, and availability requirements.

The Electronic Technician is a member of a multi-functional team providing Technical Support Services for the Federal Aviation Administration (FAA) Logistics Center (FAALC) at the Mike Monroney Aeronautical Center (MMAC) in Oklahoma City, OK.This role supports troubleshooting, repair, overhaul, testing, certification, and installation of designated electronic and mechanical systems at the component level.<ul><li>Perform troubleshooting, tear-down, repair, refurbishment, overhaul, assembly, testing, and installation services for designated equipment at the request of FAALCProduct Divisions or Groups.</li><li>Provide electronics technician services to FAALC Group/Product Divisions to ensure electronic systems, subsystems, and components meet serviceability, reliability, and availability requirements.</li><li>Complete all assigned tasks in accordance with applicable FAA and FAALC standards, orders, technical instructions, and quality procedures.</li></ul>Responsibilities<ul><li>Perform a full range of technical support services on designated equipment, including troubleshooting, repair, overhaul, testing, certification, installation, and performance analysis in support of FAALC Product Divisions and Groups.</li><li>Perform electronic component-level troubleshooting and repair of RF circuit card assemblies and RF cabinet assemblies.</li><li>Conduct through-hole and surface mount soldering, including trace repair and eyelet repair.</li><li>Test, troubleshoot, repair, and modify electronic assemblies, components, cables, wiring harnesses, circuit cards, prototypes, test fixtures, and test beds.</li><li>Assemble cables, RF cables, wiring harnesses, circuit cards, and electronic assemblies in accordance with technical documentation and schematics; terminate RF connectors as required.</li><li>Perform equipment performance analysis, adjustment, calibration, certification, testing, and reporting.</li><li>Install electrical, electronic, and mechanical systems, subsystems, components, engineering prototypes, and modifications.</li><li>Utilize electronic test equipment including multimeters, oscilloscopes, and network analyzers.</li><li>Read and interpret electronic and RF schematics and technical documentation.</li><li>Perform moderate physical tasks including lifting up to 50 lbs., bending, climbing, crawling, kneeling, reaching overhead, and operating cranes, trucks, tractors, or motor vehicles.</li></ul>Qualifications<ul><li>High School Diploma or GED with completion of formal technical training coursesOR</li><li>Associate Degree in Electrical Technology, Engineering Technology, or related field.</li><li>Practical experience in an Electronic Technician support role performing component-level. troubleshooting, repair, assembly, testing, and installation of electrical and electronic systems and equipment.</li><li>Demonstrated hands-on RF troubleshooting and repair experience at the component level is required.</li><li>Qualifying Technical Experience (Experience must include ONE or MORE of the following):</li><li>Component-level repair of VHF/UHF radio systems.</li><li>Troubleshooting RF amplifiers, oscillators, mixers, filters, and transceivers.</li><li>Repair of microwave transmission equipment.</li><li>Servicing RF power modules and RF front-end circuits.</li><li>Aligning and tuning RF circuits.</li><li>Performing VSWR and impedance matching measurements.</li><li>Operating spectrum analyzers, network analyzers, RF signal generators, and RF power meters.</li><li>Qualifying Technical Skills & Knowledge:</li><li>Proficient in the use of electronic test equipment including multimeters, oscilloscopes, signal generators, AC/DC power supplies, and power meters.</li><li>Ability to read, interpret, and follow analog and digital circuit schematics and symbols (resistors, capacitors, inductors, transistors, ICs, etc.).</li><li>Ability to perform basic electronics troubleshooting (voltage, current, resistance measurements; identification of opens, shorts, and grounds).</li><li>Experience with through-hole soldering and de-soldering; surface mount soldering preferred.</li><li>Ability to assemble, test, and terminate RF cables and connectors; network analyzer experience preferred.</li><li>Strong mechanical aptitude and problem-solving skills.</li><li>Security & Eligibility Requirements:</li><li>Ability to obtain a NACI Clearance / Public Trust.</li><li>Must possess TWO forms of unexpired identification for eligibility verification, including:</li><li>One Primary Government-Issued ID (ONE of the following):</li><li>REAL ID-compliant driver's license or state-issued ID.</li><li>U.S. Passport or Passport Card.</li><li>Permanent Resident Card (Form I-551).</li><li>U.S. Military or Military Dependent ID (with photo).</li><li>U.S. Government PIV Card.</li><li>U.S. DOT Transportation ID Card.</li><li>One Secondary ID (ONE of the following):</li><li>Social Security Card.</li><li>Original or certified birth certificate.</li><li>Certificate of U.S. Citizenship or Naturalization.</li><li>Voter registration card.</li></ul>Job ID2026-22927Work TypeOn-SiteCompany DescriptionWork Where it MattersFive Rivers Analytics (FRA), an Akima company, is not just another federal IT contractor. As an Alaska Native Corporation (ANC), our mission and purpose extend beyond our exciting federal projects as we support our shareholder communities in Alaska.At FRA, the work you do every day makes a difference in the lives of our 15,000 Iñupiat shareholders, a group of Alaska natives from one of the most remote and harshest environments in the United States.For our shareholders, FRA provides support and employment opportunities and contributes to the survival of a culture that has thrived above the Arctic Circle for more than 10,000 years.For our government customers, FRA delivers streamline operations in support of an increasingly fast-paced, complex, and dynamic digital environment.As a FRA employee, you will be surrounded by a challenging, yet supportive work environment that is committed to innovation and diversity, two of our most important values. You will also have access to our comprehensive benefits and competitive pay in addition to growth opportunities and excellent retirement options.We are an equal opportunity employer and comply with all applicable federal, state, and local fair employment practices laws. All applicants will receive consideration for employment, without regard to race, color, religion, creed, national origin, gender or gender-identity, age, marital status, sexual orientation, veteran status, disability, pregnancy or parental status, or any other basis prohibited by law. If you are an individual with a disability, or have known limitations related to pregnancy, childbirth, or related medical conditions, and would like to request a reasonable accommodation for any part of the employment process, please contact us at job-assist@akima.com or 571-353-7053 (information about job applications status is not available at this contact information).

Nana Regional

Electronics Technician I (Non-Travel)

Calibration

Community Support

Component Assembly

Crane

Cross-Functional

Customer Support/Service

Digital Circuits

Diversity

Driver's License

Educational Technology

Electrical Components

Electrical Engineering

Electricity

Electronics

Electronics Assembly

Equipment Maintenance/Repair

Federal Aviation Administration (FAA)

Federal Contracts

Government

High School Diploma

Identify Issues

Integrated Circuits (ICs)

Internet/Online Service

Legal

Lift/Move 50 Pounds

Logistics

Maintenance - Electrical

Medical Conditions

Microwaves

Network Performance/Analysis

Operational Support

Oscilloscope

Performance Analysis

Product Support

Prototyping

Radio Frequency

Schematics

Soldering

Spectrum Analyzers

Surface Mount Technology

Technical Support

Technical Writing

Test Equipment

Test Fixtures

Testing

Ultra High Frequency (UHF)

United States Citizen

United States Department of Transportation (DOT)

United States Military

Very High Frequency (VHF)

Wire Harness

IRecruitee

ADAPTED_NOW

Perform a full range of technical support services on designated equipment, including troubleshooting, repair, overhaul, testing, certification, installation, and performance analysis in support of FAALC Product Divisions and Groups. + Provide electronics technician services to FAALC Group/Product Divisions to ensure electronic systems, subsystems, and components meet serviceability, reliability, and availability requirements.

+ The Electronic Technician is a member of a multi-functional team providing Technical Support Services for the Federal Aviation Administration (FAA) Logistics Center (FAALC) at the Mike Monroney Aeronautical Center (MMAC) in Oklahoma City, OK. + This role supports troubleshooting, repair, overhaul, testing, certification, and installation of designated electronic and mechanical systems at the component level. + Perform troubleshooting, tear-down, repair, refurbishment, overhaul, assembly, testing, and installation services for designated equipment at the request of FAALC Product Divisions or Groups. + Provide electronics technician services to FAALC Group/Product Divisions to ensure electronic systems, subsystems, and components meet serviceability, reliability, and availability requirements. + Complete all assigned tasks in accordance with applicable FAA and FAALC standards, orders, technical instructions, and quality procedures. Responsibilities + Perform a full range of technical support services on designated equipment, including troubleshooting, repair, overhaul, testing, certification, installation, and performance analysis in support of FAALC Product Divisions and Groups. + Perform electronic component-level troubleshooting and repair of RF circuit card assemblies and RF cabinet assemblies. + Conduct through-hole and surface mount soldering, including trace repair and eyelet repair. + Test, troubleshoot, repair, and modify electronic assemblies, components, cables, wiring harnesses, circuit cards, prototypes, test fixtures, and test beds. + Assemble cables, RF cables, wiring harnesses, circuit cards, and electronic assemblies in accordance with technical documentation and schematics; terminate RF connectors as required. + Perform equipment performance analysis, adjustment, calibration, certification, testing, and reporting. + Install electrical, electronic, and mechanical systems, subsystems, components, engineering prototypes, and modifications. + Utilize electronic test equipment including multimeters, oscilloscopes, and network analyzers. + Read and interpret electronic and RF schematics and technical documentation. + Perform moderate physical tasks including lifting up to 50 lbs., bending, climbing, crawling, kneeling, reaching overhead, and operating cranes, trucks, tractors, or motor vehicles. Qualifications + High School Diploma or GED with completion of formal technical training coursesOR + Associate Degree in Electrical Technology, Engineering Technology, or related field. + Practical experience in an Electronic Technician support role performing component-level. troubleshooting, repair, assembly, testing, and installation of electrical and electronic systems and equipment. + Demonstrated hands-on RF troubleshooting and repair experience at the component level is required. + Qualifying Technical Experience (Experience must include ONE or MORE of the following): + Component-level repair of VHF/UHF radio systems. + Troubleshooting RF amplifiers, oscillators, mixers, filters, and transceivers. + Repair of microwave transmission equipment. + Servicing RF power modules and RF front-end circuits. + Aligning and tuning RF circuits. + Performing VSWR and impedance matching measurements. + Operating spectrum analyzers, network analyzers, RF signal generators, and RF power meters. + Qualifying Technical Skills & Knowledge: + Proficient in the use of electronic test equipment including multimeters, oscilloscopes, signal generators, AC/DC power supplies, and power meters. + Ability to read, interpret, and follow analog and digital circuit schematics and symbols (resistors, capacitors, inductors, transistors, ICs, etc.). + Ability to perform basic electronics troubleshooting (voltage, current, resistance measurements; identification of opens, shorts, and grounds). + Experience with through-hole soldering and de-soldering; surface mount soldering preferred. + Ability to assemble, test, and terminate RF cables and connectors; network analyzer experience preferred. + Strong mechanical aptitude and problem-solving skills. + Security & Eligibility Requirements: + Ability to obtain a NACI Clearance / Public Trust. + Must possess TWO forms of unexpired identification for eligibility verification, including: + One Primary Government-Issued ID (ONE of the following): + REAL ID-compliant driver’s license or state-issued ID. + U.S. Passport or Passport Card. + Permanent Resident Card (Form I-551). + U.S. Military or Military Dependent ID (with photo). + U.S. Government PIV Card. + U.S. DOT Transportation ID Card. + One Secondary ID (ONE of the following): + Social Security Card. + Original or certified birth certificate. + Certificate of U.S. Citizenship or Naturalization. + Voter registration card. Job ID 2026-21931 Work Type On-Site Company Description Work Where it Matters Five Rivers Analytics (FRA), an Akima company, is not just another federal IT contractor. As an Alaska Native Corporation (ANC), our mission and purpose extend beyond our exciting federal projects as we support our shareholder communities in Alaska. At FRA, the work you do every day makes a difference in the lives of our 15,000 Iñupiat shareholders, a group of Alaska natives from one of the most remote and harshest environments in the United States. For our shareholders, FRA provides support and employment opportunities and contributes to the survival of a culture that has thrived above the Arctic Circle for more than 10,000 years. For our government customers, FRA delivers streamline operations in support of an increasingly fast-paced, complex, and dynamic digital environment. As a FRA employee, you will be surrounded by a challenging, yet supportive work environment that is committed to innovation and diversity, two of our most important values. You will also have access to our comprehensive benefits and competitive pay in addition to growth opportunities and excellent retirement options. We are an equal opportunity employer and comply with all applicable federal, state, and local fair employment practices laws. All applicants will receive consideration for employment, without regard to race, color, religion, creed, national origin, gender or gender-identity, age, marital status, sexual orientation, veteran status, disability, pregnancy or parental status, or any other basis prohibited by law. If you are an individual with a disability, or have known limitations related to pregnancy, childbirth, or related medical conditions, and would like to request a reasonable accommodation for any part of the employment process, please contact us at job-assist@akima.com or 571-353-7053 (information about job applications status is not available at this contact information).

Akima

Impedance Matching

Oscillator

Power Amplifier

Problem Solving Skills

Transceivers

User Interface/Experience (UI/UX)

NANA Regional Corporation

Our objective is to be the trusted, first-choice service provider for delivering best-in-class operational technology to control, automate, operate, analyze and optimize assets. In addition to rewarding job opportunities and continuous growth, we offer an enjoyable working environment, where teamwork and respectful collaboration is highly valued.

We are a systems integration and engineering services company with a passion for tearing down industrial inefficiencies. We believe that systems integration is fundamental to leveraging new and well-established technologies against operational challenges in the manufacturing and industrial ecosystem. Our objective is to be the trusted, first-choice service provider for delivering best-in-class operational technology to control, automate, operate, analyze and optimize assets.Primary Responsibilities:<ul><li>Delegate tasks and responsibilities to the apprentice level crew members.</li><li>Install conduit and or MC-HL type cable according to the NEC code.</li><li>Sufficiently install and troubleshoot different relay's, VFD's, wireless or hard-wired instrumentation and controllers.</li><li>Work on different process, compression and metering equipment used in the upstream and midstream sectors of the oilfield.</li><li>Possess knowledge of installing electrical power, control, measurement and safety systems for the upstream and midstream sectors.</li><li>Effectively generate and communicate detailed work records and paperwork.</li><li>Ability to install, calibrate and troubleshoot instrumentation, EFM's, and Cell modems.</li></ul>Required Skills:<ul><li>Proficient in modifications and understanding electrical schematics and drawings.</li><li>Demonstrates an understanding of electrical systems, switchgear, circuit types and able to troubleshoot any issues presented.</li><li>Must possess the skill set to work on low voltage and medium voltage equipment and circuits.</li><li>Understanding of most electrical components commonly found in the oil and gas industry.</li><li>Possess the ability to install, wire and loop test PLC's, RTU's and EFM's.</li><li>Ability to work safely and recognize potential hazards.</li><li>Ability to handle pressure and possess positive leadership in difficult or challenging situations.</li><li>Ability to calibrate and trouble shoot process Instrumentation.</li><li>Must be a detail-oriented, results-driven individual with a commitment to quality, accuracy, with the ability to organize and prioritize workloads to meet deadlines.</li><li>Strong problem solving, technical, and functional skills with the ability to multi-task and be willing to learn.</li><li>Must be able to work collaboratively and cooperatively, take direction, work well in a team environment, and interact with all levels of management, engineering, systems, operations and field personnel.</li></ul>Requirements:<ul><li>Minimum of five (5) years of Instrumentation and electrical experience in the Industrial oil and gas sectors.</li><li>Experienced in all phases of a project for the installation of Instrumentation and electrical systems and or equipment.</li><li>High School Diploma or equivalent.</li><li>Up to date on all the new codes and standards in NFPA 70E (NEC code book).</li><li>Applicable regulatory safety training.</li><li>Must reside within an hour of Oklahoma City.</li></ul>Equipment Used:<ul><li>Digital Camera</li><li>Multimeter</li><li>Megger</li><li>Amp probe</li><li>Calibration equipment (Hart, Crystal, loop calibrator, etc.)</li><li>Handheld Electrical tools needed to perform his or her job duties.</li><li>Laptop with software for configurations of EFM's, cell modems and radio networks.</li></ul>Work Conditions:<ul><li>Applicants will need to be willing to work weekends and/or overtime when asked if deadlines need to be met or customer requests.</li><li>Position will work primarily in the field. Subject to time pressures and constraints and is also dependent on input from others. Need to be fit for duty.</li><li>Must have a valid driver's license and will need to meet the company's insurers driving policy requirements.</li><li>Per diem will be compensated to defray expenses associated with traveling, meals and lodging in accordance with applicable law.</li><li>Subject to a background check, as well as drug and alcohol testing, per applicable federal regulations.</li><li>Work Location: Oklahoma City</li></ul>License/Certification:<ul><li>Valid Driver's License (Required)</li><li>Oklahoma Journeyman Electrician license (Preferred)</li></ul>Willingness to Travel:<ul><li>10% (Required)</li></ul>Benefits:<ul><li>401(k) and Roth 401(k)</li><li>Dental Insurance</li><li>Health Insurance</li><li>Life Insurance</li><li>Vision Insurance</li><li>Employee Stock Purchase Plan (ESPP)</li><li>Paid time off</li><li>Performance Bonus</li><li>Career Growth Opportunities and Training</li></ul>WHY TIGAIn addition to rewarding job opportunities and continuous growth, we offer an enjoyable working environment, where teamwork and respectful collaboration is highly valued. We offer the benefits of a midsized local office atmosphere backed by a large network of highly skilled professionals.TIGA, a Tetra Tech Company is proud to be an Equal Opportunity Employer. All qualified candidates will be considered without regard to race, color, religion, national origin, military or veteran status, gender, age, disabilities, pregnancy and pregnancy-related conditions, genetic information and any other characteristics protected by the law. We invite resumes from all interested parties.Additional Information<ul><li>Organization: 227 DSX</li></ul>

Tetra Tech is a leading provider of consulting, engineering, and technical services worldwide. Our reputation rests on the technical expertise and dedication of our employees—16,000 people working together across disciplines and time zones to provide smart, sustainable solutions for challenging projects. We are proud to be home to leading technical experts in water, environment, infrastructure, resource management, energy, and international development. Tetra Tech combines the resources of a global, multibillion dollar company with local, client-focused delivery in 400 locations around the world. We offer competitive compensation and benefits and are searching for innovative people to join our teams.

Radio Jobs in El Reno, OK

Resume Resources

Get noticed by top employers!

Radio Jobs in El Reno, OK

Electronics Technician I (Non-Travel) Nana Regional

Electronics Technician I (Non-Travel) Akima

I&E Technician (Oklahoma City) Tetra Tech Inc

Resume Resources