NewSenior Principal RF Subsystems Engineer RaytheonSenior Principal RF Subsystems EngineerAlbuquerque, NMExpertise in concepts such as phase noise, mixer conversion spurs, automatic gain control (AGC), sensitivity, intermodulation distortion (IMD), bit error rate, instantaneous bandwidth, adjacent channel interference, and ADC measurements/calculations (Nyquist and SFDR). Perform modeling and analysis of link budgets, RF cascades, electromagnetic emissions (EME), antenna patterns, phase noise, receiver sensitivity, transmitter power, spurious signals, modulation, isolation, and ADC characteristics.
RF Test Engineer 3D Glass Solutions IncRF Test EngineerAlbuquerque, NMThe position is responsible for developing and overseeing testing of cutting-edge RF integrated passive devices (IPD) and advanced system-in-package (SiP) modules. Use measurement equipment such as vector network analyzers, source meters, and digital multimeters to fully characterize electrical devices.
Electronics Tech - Fiber Optics/Radio Control System Parsons CorpElectronics Tech - Fiber Optics/Radio Control SystemNM$15.68–$71.30 / hourTest and troubleshoot electrical components by applying the theory of operation of transistors, solid state components, integrated circuits, motors, servos, power transmissions, and other electrical devices utilizing electrical schematics, wiring diagrams, blueprints, color codes, publications, and other technical data. In this role you will get to perform such tasks as replacing components, wiring circuits, repairing simple electronic equipment; and taking test readings using common instruments such as digital multi-meters, signal generators, semiconductor testers, curve tracers, and oscilloscopes.
Senior Mechanical Design Engineer (RF Systems & Radomes) Castelion CorporationSenior Mechanical Design Engineer (RF Systems & Radomes)Rio Rancho, New MexicoWork closely with RF, avionics, materials, and thermal teams to ensure designs meet RF performance requirements (e.g., transmission, reflection, boresight error) while maintaining structural integrity. You will work hands-on with multidisciplinary engineering teams to design, analyze, build, and validate radomes and RF packaging solutions in a fast-paced, hardware-driven environment.
High-Power Radio Frequency Engineer (R&D Engineer 2 or 3) Los Alamos National LaboratoryHigh-Power Radio Frequency Engineer (R&D Engineer 2 or 3)Los Alamos, NM$106,400–$176,000 / yearDue to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. These consist of two 750-keV Cockcroft-Walton-based injector systems (H+ and H- systems), a 201.25-MHz drift-tube linear accelerator (LINAC) utilizing high-power diacrode tubes, an 805-MHz coupled cavity LINAC utilizing high-power klystrons as the primary power source, a proton storage ring, and roughly a kilometer of beam transport lines that deliver beam to the five independent research programs.
RF Engineer / Analyst (Navwar) CACI International Inc.RF Engineer / Analyst (Navwar)Albuquerque, NM$71,500–$150,200 / yearResponsibilities: You will help develop critical navigation warfare insights to enhance the Department of Defense's understanding of Positioning, Navigation, and Timing (PNT) vulnerabilities and threats, supporting operational readiness and strategic decision-making across multiple defense agencies and coalition partners. The Opportunity: As a CACI Mission & Engineering NAVWAR Analyst (RF Data Analyst) supporting the Joint Navigation Warfare Center (JNWC), you will contribute to enhancing the Department of Defense's (DoD) understanding of Positioning, Navigation, and Timing (PNT) vulnerabilities and threats.
RF Pcba Design And Test Engineer AerovironmentRF Pcba Design And Test EngineerAlbuquerque, NM$111,500–$170,000 / yearArchitect automated test sequences (Python/LabVIEW/MATLAB or similar) for VNAs, spectrum analyzers, signal generators, power meters, oscilloscopes, and RF switch matrices; integrate data logging, serialization, and dashboards; manage version control and CI where appropriate. Working knowledge of IPC-2221/2223, IPC-6012, IPC-A-600/-610 Class 3, ANSI/ESD S20.20, environmental/EMI test practices (e.g., MIL-STD-810/461 as applicable), calibration traceability,+ and DoD documentation practices.
Lead Engineer - RF Engineering AeroVironment IncLead Engineer - RF EngineeringAlbuquerque, NM$111,500–$170,000 / yearArchitect automated test sequences (Python/LabVIEW/MATLAB or similar) for VNAs, spectrum analyzers, signal generators, power meters, oscilloscopes, and RF switch matrices; integrate data logging, serialization, and dashboards; manage version control and CI where appropriate. Working knowledge of IPC-2221/2223, IPC-6012, IPC-A-600/-610 Class 3, ANSI/ESD S20.20, environmental/EMI test practices (e.g., MIL-STD-810/461 as applicable), calibration traceability,+ and DoD documentation practices.
Systems Engineer - Land Mobile Radio Motorola Solutions IncSystems Engineer - Land Mobile RadioAlbuquerque, NMRemote$95,000–$105,000 / yearOur Systems Engineers work closely with customers to deliver world-class, leading edge solutions that enhance personnel safety in "moments that matter," and address the day-to-day wireless communications challenges faced by State and local government First Responder public safety agencies. This requires: Final Design and implementation of the radio network accounting for infrastructure, subscribers, power systems design, equipment shelter and tower layouts, backhaul network design including microwave, leased line, and customer provided Ethernet networks.
Lead Systems Engineer, Space RF Systems AeroVironment IncLead Systems Engineer, Space RF SystemsAlbuquerque, NM$111,500–$158,025 / yearBachelor's degree in Systems Engineering or related engineering field with 8+ years of formal experience OR master's degree in Systems Engineering or related engineering field with 6+ years of formal systems engineering experience. In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction.
Senior Systems Engineer, Space RF Systems AeroVironment IncSenior Systems Engineer, Space RF SystemsAlbuquerque, NM$91,000–$129,150 / yearBachelor's degree in Systems Engineering or related engineering field with 5+ years of formal experience OR master's degree in Systems Engineering or related engineering field with 3+ years of formal systems engineering experience. In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction.
RF Modeling And Simulation Analyst CACI International Inc.RF Modeling And Simulation AnalystAlbuquerque, NM$55,000–$73,500 / yearThe Opportunity:As a CACI Mission & Engineering Support NAVWAR Engineer (Modeling and Simulation) supporting the Joint Navigation Warfare Center (JNWC) you will contribute to enabling Positioning, Navigation, and Timing (PNT) superiority for the Department of Defense, interagency, and coalition partners. Pay Range: There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications.
RF Modeling and Simulation Analyst CACI International IncRF Modeling and Simulation AnalystAlbuquerque, NM$55,000–$73,500 / yearThe Opportunity: As a CACI Mission & Engineering Support Modeling and Simulation Analyst supporting the Joint Navigation Warfare Center (JNWC) you will contribute to enabling Positioning, Navigation, and Timing (PNT) superiority for the Department of Defense, interagency, and coalition partners. Pay Range: There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications.
RF Engineer / Analyst (NAVWAR) CACIRF Engineer / Analyst (NAVWAR)Albuquerque, New Mexico$71,500–$150,200 / yearYou will help develop critical navigation warfare insights to enhance the Department of Defense’s understanding of Positioning, Navigation, and Timing (PNT) vulnerabilities and threats, supporting operational readiness and strategic decision-making across multiple defense agencies and coalition partners. As a CACI Mission & EngineeringNAVWAR Analyst (RF Data Analyst)supporting the Joint Navigation Warfare Center (JNWC), you will contribute to enhancing the Department of Defense's (DoD) understanding of Positioning, Navigation, and Timing (PNT) vulnerabilities and threats.
Mobile Radio System Administrator Edgewater Federal Solutions, Inc.Mobile Radio System AdministratorAlbuquerque, New MexicoFull timeEdgewater Federal Solutions is ISO 9001, 20000-1, 270001 certified, appraised at CMMI Level 3 Maturity for Development and Services, and has been named in the Top Workplaces in the Greater Washington Area Small Companies for 2018 through 2025. Additionally, this position works directly with customers to evaluate equipment needs, prepare equipment quotations and cost estimates, coordinate procurement activities, and ensure timely delivery of communications solutions.
RF Solutions Engineer Keysight Technologies IncRF Solutions EngineerSanta Fe, NMKeysight is looking for an RFuW Field Solutions Engineer that will work closely with our field sales team to understand customer measurement challenges, demonstrate Keysight solutions, and enable our customers to be successful. This position requires the following skillsets and attributes, with an emphasis on technical expertise and communication skills: BS required, MS preferred in EE/CS/ECE or equivalent education with background in Telecommunications and/or RF systems.
RF Solutions Engineer - Albuquerque Keysight Technologies, Inc.RF Solutions Engineer - AlbuquerqueSanta Fe, New MexicoResponsibilities: Keysight is looking for an RFuW Field Solutions Engineer that will work closely with our field sales team to understand customer measurement challenges, demonstrate Keysight solutions, and enable our customers to be successful. Our ~16,800 employees create world-class solutions in communications, 5G, automotive, energy, quantum, aerospace, defense, and semiconductor markets for customers in over 100 countries.
RF Modeling and Simulation Analyst CACIRF Modeling and Simulation AnalystAlbuquerque, New Mexico$55,000–$73,500 / yearThe specific/budgeted/target pay for this position is Novice 55,000 – 73,500; Intermediate 74,000 – 91,000; Advanced 92,000 – 110, 000 Responsibilities: You will play a crucial role in reverse engineering existing NAVWAR signal processing solutions, ensuring that system requirements are synthesized, allocated, and derived to create a fully defined and mission-compliant system architecture. As a CACI Mission & Engineering Support Modeling and Simulation Analyst supporting the Joint Navigation Warfare Center (JNWC) you will contribute to enabling Positioning, Navigation, and Timing (PNT) superiority for the Department of Defense, interagency, and coalition partners.
94E Radio and Communications Security Repairer Army National Guard of the United States94E Radio and Communications Security RepairerRio Rancho, NM$200–$250 / weekAdvanced Radio and Communications Security Repairers take on more challenging projects, including training and supervising other Soldiers, testing equipment, performing complex repairs, and ensuring that the National Security Agency-approved components are used in communication security/controlled cryptographic item repairs. As the Radio and Communications Security Repairer, you will maintain the equipment and systems that ensure Army National Guard units can communicate over secure channels.
Technician I, Outside Plant Commnet Wireless LLCTechnician I, Outside PlantNMDuties and Responsibilities (included but not limited to): Installs, tests, and repairs network equipment including fiber optic, copper, and radio systems; evaluates job sites for optimal service placement and performs necessary documentation of all tasks. Working knowledge of various test and locate equipment for network facilities and buried infrastructure, including Similar to EXFO, JDSU, VIAVI, OTDRs, and locate equipment for fiber optics and copper cable.